共查询到20条相似文献，搜索用时 31 毫秒
1.
Chalk and other porous rocks are known to behave differently when saturated with different pore fluids. The behavior of these rocks varies with different pore fluids and additional deformation occurs when the pore fluid composition changes. In this article, we review the evidence that behavior in porous rocks is pore‐fluid‐dependent, present a constitutive model for pore‐fluid‐dependent porous rocks, and present a compilation of previously published data to develop quantitative relationships between various pore fluids and mechanical behavior. The model proposed here is based on a state parameter approach for weathering and has similarities to models previously proposed for weathering‐sensitive rocks in that the values for parameters that characterize material behavior vary as a function of weathering. Comparisons with published experimental data indicate that the model is capable of reproducing observed behavior of chalk under a variety of loading conditions and changes in pore fluid composition. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
2.
A viscoplastic subloading soil model for rate‐dependent cyclic anisotropic structured behaviour 
下载免费PDF全文
下载免费PDF全文 This paper presents a new purely viscoplastic soil model based on the subloading surface concept with a mobile centre of homothety, enabling the occurrence of viscoplastic strains inside the yield surface and avoiding the abrupt change in stiffness of the traditional overstress viscoplastic models. This is required for overconsolidated soils. The model is formulated to reproduce the soil rate‐dependent behaviour under cyclic loading (changes in loading direction) and incorporates both initial and induced anisotropy, as well as destructuring. The model shows good qualitative response to some imposed three‐dimensional stress paths under quasi‐inviscid (elastoplastic) behaviour. Some of the main time‐dependent aspects of soil behaviour that the model is capable of reproducing were also illustrated. The capability of the model to adequately reproduce the results from an undrained triaxial test performed on stiff overconsolidated clays from the Lisbon region (Formação de Benfica), with an unloading–reloading deviatoric stress cycle at constant mean stress, that incorporates a series of staggered fast loading and creep stages, was evaluated. The model was able to reproduce well the main observed aspects of the time‐dependent stress–strain response and pore pressure evolution of a stiff overconsolidated clay under complex loading. The revised and generalised viscoplastic subloading surface concept is viable and can be applied to a consistent extension to viscoplasticity, including in the interior of the yield surface, of existing elastoplastic models formulated for soils and other materials. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
3.
A bounding surface elasto‐viscoplastic constitutive model for non‐isothermal cyclic analysis of asphaltic materials 下载免费PDF全文
下载免费PDF全文 An elasto‐viscoplastic constitutive model for asphaltic materials is presented within the context of bounding surface plasticity theory, taking into account the effects of the stress state, void binder degree of saturation, temperature and strain rate on the material behaviour. A stress state dependent non‐linear elasticity model is introduced to represent time‐independent recoverable portion of the deformation. The consistent visco‐plasticity framework is utilised to capture the rate‐dependent, non‐recoverable strain components. The material parameters introduced in the model are identified, and their determination from conventional laboratory tests is discussed. The capability of the model to reproduce experimentally observed response of asphaltic materials is demonstrated through numerical simulations of several laboratory test data from the literature. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
4.
The purpose of the present paper is to clarify the effects of permeability and initial heterogeneity on the strain localization of fluid‐saturated cohesive soil modelled by a strain gradient‐dependent poro‐viscoplastic constitutive model. The effects of permeability and gradient parameters on the growth rate of the fluctuation were obtained by a linear instability analysis. Deformation behaviour of clay specimens modelled as a viscoplastic model with a second order strain gradient during shear was numerically analysed by a soil–water coupled FEM under both globally undrained and partially drained conditions. It was found that the deformation pattern and the stress–strain curve greatly depend on the permeability, the drainage conditions and the initial non‐homogeneous properties. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
5.
Tsutomu Namikawa 《国际地质力学数值与分析法杂志》2001,25(6):605-627
A delayed plastic model, based on the theory of plasticity, is proposed to represent the time‐dependent behaviour of materials. It is assumed in this model that the stress can lie outside the yield surface and the conjugate stress called static stress is defined on the yield surface. The stress–strain relation is calculated based on the plastic theory embedding the static stress. Thus, the stress–strain relation of the model practically corresponds to that of the inviscid elastoplastic model under fairly low rate deformation. The delayed plastic model is coupled with the Cam‐clay model for normally consolidated clays. The performance of the model is then examined by comparing the model predictions with reported time‐dependent behaviour of clays under undrained triaxial conditions. It is shown that the model is capable of predicting the effect of strain rate during undrained shear and the undrained creep behaviour including creep rupture. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
6.
A computational framework is presented for dynamic strain localization and deformation analyses of water‐saturated clay by using a cyclic elasto‐viscoplastic constitutive model. In the model, the nonlinear kinematic hardening rule and softening due to the structural degradation of soil particles are considered. In order to appropriately simulate the large deformation phenomenon in strain localization analysis, the dynamic finite element formulation for a two‐phase mixture is derived in the updated Lagrangian framework. The shear band development is shown through the distributions of viscoplastic shear strain, the axial strain, the mean effective stress, and the pore water pressure in a normally consolidated clay specimen. From the local stress–strain relations, more brittleness is found inside the shear bands than outside of them. The effects of partially drained conditions and mesh‐size dependency on the shear banding are also investigated. The effect of a partially drained boundary is found to be insignificant on the dynamic shear band propagation because of the rapid rate of applied loading and low permeability of the clay. Using the finer mesh results in slightly narrower shear bands; nonetheless, the results manifest convergency through the mesh refinement in terms of the overall shape of shear banding and stress–strain relations. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
7.
Masoud K. Darabi Rashid K. Abu Al‐Rub Eyad A. Masad Dallas N. Little 《国际地质力学数值与分析法杂志》2012,36(7):817-854
Based on the continuum damage mechanics, a general and comprehensive thermodynamic‐based framework for coupling the temperature‐dependent viscoelastic, viscoplastic, and viscodamage behaviors of bituminous materials is presented. This general framework derives systematically Schapery‐type nonlinear viscoelasticity, Perzyna‐type viscoplasticity, and a viscodamage model analogous to the Perzyna‐type viscoplasticity. The resulting constitutive equations are implemented in the well‐known finite element code Abaqus via the user material subroutine UMAT. A systematic procedure for identifying the model parameters is discussed. Finally, the model is validated by comparing the model predictions with a comprehensive set of experimental data on hot mix asphalt that include creep‐recovery, creep, uniaxial constant strain rate, and repeated creep‐recovery tests in both tension and compression over a range of temperatures, stress levels, and strain rates. Comparisons between model predictions and experimental measurements show that the presented constitutive model is capable of predicting the nonlinear behavior of asphaltic mixes under different loading conditions. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
8.
This paper presents a three‐dimensional elastoplastic constitutive model for predicting the hydraulic and mechanical behaviour of unsaturated soils. It is based on experimental results obtained from a series of controlled‐suction triaxial tests on unsaturated compacted clay with different initial densities. Hydraulic hysteresis in the water‐retention behaviour is modelled as an elastoplastic process, with the elastic part modelled by a series of scanning curves and the elastoplastic part modelled by the main drying and wetting curves. The effect of void ratio on the water‐retention behaviour is studied using data obtained from controlled‐suction wetting–drying cyclic tests on unsaturated compacted clay with different initial densities. The effect of the degree of saturation on the stress–strain‐strength behaviour and the effect of void ratio on the water‐retention behaviour are considered in the model, as is the effect of suction on the hydraulic and mechanical behaviour. The initial density dependency of the compacted soil behaviour is modelled by experimental relationships between the initial density and the corresponding yield stress and, thereby, between the initial density and the normal compression line. The model is generalized to three‐dimensional stress states by assuming that the shapes of the failure and yield surfaces in the deviatoric stress plane are given by the Matsuoka–Nakai criterion. Model predictions of the stress–strain and water‐retention behaviour are compared with those obtained from triaxial tests with different initial densities under isotropic compression, triaxial compression and triaxial extension, with or without variation in suction. The comparisons indicate that the model accurately predicts the hydraulic and mechanical behaviour of unsaturated compacted soils with different initial densities using the same material constant. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
9.
Timo Saksala 《国际地质力学数值与分析法杂志》2010,34(13):1362-1386
This paper presents a damage–viscoplastic cap model for rocks with brittle and ductile behavior under low‐velocity impact loading, which occurs, e.g. in percussive drilling. The model is based on a combination of the recent viscoplastic consistency model by Wang and the isotropic damage concept. This approach does not suffer from ill posedness—caused by strain softening—of the underlying boundary/initial‐value problem since viscoplasticity provides a regularization under dynamic loading by introducing an internal length scale. The model uses the Drucker–Prager (DP) yield function with the modified Rankine criterion as a tension cut‐off and a parabolic cap surface as a compression cut‐off. The parabolic cap is smoothly fitted to the DP cone. The strain softening law in compression is calibrated with the degradation index concept of Fang and Harrison. Thereby, the model is able to capture the brittle‐to‐ductile transition and hardening behavior of geomaterials under highly confined compression, which is the prevailing stress state under a bit‐button in percussive drilling. Rock strength heterogeneity is characterized statistically at the structural level using the Weibull distribution. An explicit time integrator is chosen for solving the FE‐discretized equations of motion. The contact constraints due to the impact of an indenter are imposed with the forward increment Lagrange multiplier method that is compatible with explicit time integrators. The model is tested at the material point level with various uniaxial and triaxial tests. At the structural level confined compression, uniaxial tension tests and a rock sample under low‐velocity impact are simulated. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
10.
V. Palchik 《Rock Mechanics and Rock Engineering》2006,39(3):215-232
Summary. This paper presents a model created by the author to predict stress–strain relationships for weak to strong carbonate rocks
(σc < 100 MPa) exhibiting axial strains up to 1%. The stress–strain model based on Haldane’s distribution function (Haldane,
1919) relates the axial stress (or normalized axial stress) to the square of an exponential function where the exponent is
axial strain. To obtain accurate stress–strain relationship over the whole pre-failure strain with the proposed stress–strain
model, it is necessary to have only one datum point (peak axial stress and maximum axial strain at this peak stress). It is
shown that the stress–strain relationships observed in laboratory compression tests on samples collected from six carbonate
rock formations (chalk, dolomites and limestones) from different parts of Israel, agree well with the stress–strain prediction
model proposed by the author. 相似文献
11.
Numerical modeling of dynamic rock fracture with a combined 3D continuum viscodamage‐embedded discontinuity model 下载免费PDF全文
下载免费PDF全文 This paper deals with numerical modeling of dynamic failure phenomena in rate‐sensitive quasi‐brittle materials, such as rocks, with initial microcrack populations. To this end, a continuum viscodamage‐embedded discontinuity model is developed and tested in full 3D setting. The model describes the pre‐peak nonlinear and rate‐sensitive hardening response of the material behavior, representing the fracture‐process zone creation, by a rate‐dependent continuum damage model. The post‐peak response, involving the macrocrack creation accompanied by exponential softening, is formulated by using an embedded displacement discontinuity model. The finite element implementation of this model relies upon the linear tetrahedral element, which seems appropriate for explicit dynamic analyses involving stress wave propagation. The problems of crack locking and spreading typical of embedded discontinuity models are addressed in this paper. A combination of two remedies, the inclusion of viscosity in the spirit of Wang's viscoplastic consistency approach and introduction of isotropic damaging into the embedded discontinuity model, is shown to be effective in the present explicit dynamics setting. The model performance is illustrated by several numerical simulations. In particular, the dynamic Brazilian disc test and the Kalthoff–Winkler experiment show that the present model provides realistic predictions with the correct failure modes and rate‐dependent tensile strengths of rock at different loading rates. The ability of initial embedded discontinuity populations to model the initial microcrack populations in rocks is also successfully tested. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
12.
Stress‐driven integration strategies and m‐AGC tangent operator for Perzyna viscoplasticity and viscoplastic relaxation: application to geomechanical interfaces 下载免费PDF全文
下载免费PDF全文 The paper proposes a stress‐driven integration strategy for Perzyna‐type viscoplastic constitutive models, which leads also to a convenient algorithm for viscoplastic relaxation schemes. A generalized trapezoidal rule for the strain increment, combined with a linearized form of the yield function and flow rules, leads to a plasticity‐like compliance operator that can be explicitly inverted to give an algorithmic tangent stiffness tensor also denoted as the m‐AGC tangent operator. This operator is combined with the stress‐prescribed integration scheme, to obtain a natural error indicator that can be used as a convergence criterion of the intra‐step iterations (in physical viscoplasticity), or to a variable time‐step size in viscoplastic relaxation schemes based on a single linear calculation per time step. The proposed schemes have been implemented for an existing zero‐thickness interface constitutive model. Some numerical application examples are presented to illustrate the advantages of the new schemes proposed. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
13.
14.
The paper analyses the interaction between two internal length scales during dynamic strain localization in multiphase porous materials. The first internal length is introduced in the mathematical model by the gradient‐dependent plasticity for the solid skeleton, while the second one is naturally contained in the multiphase model and is due to the seepage process of the water via Darcy's law, which induces a rate‐dependent behaviour of the solid skeleton. Numerical results of a one‐dimensional example of water saturated porous medium demonstrate the competing effect between these two length scales. The porous medium is here treated as a multiphase continuum, with the pores filled by water and air, the last one at constant atmospheric pressure. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
15.
HOU Zhenkun LI Xianwen ZHANG Yanming LIANG Huqing GUO Ying CHENG Hanlie GAO Ruchao 《《地质学报》英文版》2019,93(4):972-981
Shale, as a kind of brittle rock, often exhibits different nonlinear stress-strain behavior, failure and time-dependent behavior under different strain rates. To capture these features, this work conducted triaxial compression tests under axial strain rates ranging from 5×10?6 s?1 to 1×10?3 s?1. The results show that both elastic modulus and peak strength have a positive correlation relationship with strain rates. These strain rate-dependent mechanical behaviors of shale are originated from damage growth, which is described by a damage parameter. When axial strain is the same, the damage parameter is positively correlated with strain rate. When strain rate is the same, with an increase of axial strain, the damage parameter decreases firstly from an initial value (about 0.1 to 0.2), soon reaches its minimum (about 0.1), and then increases to an asymptotic value of 0.8. Based on the experimental results, taking yield stress as the cut-off point and considering damage variable evolution, a new measure of micro-mechanical strength is proposed. Based on the Lemaitre’s equivalent strain assumption and the new measure of micro-mechanical strength, a statistical strain-rate dependent damage constitutive model for shale that couples physically meaningful model parameters was established. Numerical back-calculations of these triaxial compression tests results demonstrate the ability of the model to reproduce the primary features of the strain rate dependent mechanical behavior of shale. 相似文献
16.
Determination of transport properties of geomaterials is an important issue in many fields of engineering analysis and design. For example, in petroleum engineering, in situ permeability of an oil reservoir may be crucial in establishing its viability for exploitation, whilst prevention of leakage from underground storage facilities for oil and gas, nuclear waste as well as viability of CO2 sequestration projects crucially depends on its long‐term values. Permeability is indirectly related to the porosity, pore‐size distribution and pore architecture of the porous media. These parameters evolve when a strain field is imposed. Physical measurement of permeability under a strain field in laboratory conditions is difficult, expensive and prone to a number of uncertainties. In the past, pore network models have been used to compute permeability of materials under stress/strain‐free conditions. In this paper, we propose an enhanced pore network model to compute permeability of rocks and rock‐like porous media under a stress/strain field. Data of pore‐size distribution obtained from mercury intrusion porosimetry are used to compute permeability of rock samples from various unspecified oilfields in the world. It is shown that the two permeabilities can be predicted from the model with sufficient accuracy. A hypothesis for change in porosity, pore‐size distribution and pore architecture as a result of imposed mechanical strains is then proposed. Based on this, permeability is computed again for one of the rock samples under uniaxial and triaxial compressive and tensile strain fields. It is shown that depending on the state of strain field imposed, permeability evolves in an anisotropic manner. Permeability under tensile strain field increases dramatically compared with the reduction that takes place under compressive strain field of the same magnitude. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
17.
The objective of this study is to derive an effective stress‐based constitutive law capable of predicting rate‐dependent stress–strain, stress path and undrained shear strength and creep behavior. The flow rule used in the MIT‐E3 model and viscoplasticity theory is employed in the derivation. The model adopts the yield surface capable of representing the yield behavior of the Taipei silty clay and assumes that it is initially symmetric about the K0‐line. A method is then developed to compute the gyration and expansion of the loading surface to simulate the anisotropic behavior due to the principal stress rotation after shear. There are 11 parameters required for the model to describe the soil behavior and six of them are exactly the same as those used in the Modified Cam‐clay model. The five additional parameters can be obtained by parametric studies or conventional soil tests, such as consolidation tests, triaxial compression and extension tests. Finally, verification of the model for the anisotropic behavior, creep behavior and the rate‐dependent undrained stress–strain and shear strength of the Taipei silty clay is conducted. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
18.
The yield vertex non‐coaxial theory is implemented into a critical state soil model, CASM (Int. J. Numer. Anal. Meth. Geomech. 1998; 22 :621–653) to investigate the non‐coaxial influences on the stress–strain simulations of real soil behaviour in the presence of principal stress rotations. The CASM is a unified clay and sand model, developed based on the soil critical state concept and the state parameter concept. Without loss of simplicity, it is capable of simulating the behaviour of sands and clays within a wide range of densities. The non‐coaxial CASM is employed to simulate the simple shear responses of Erksak sand and Weald clay under different densities and initial stress states. Dependence of the soil behaviour on the Lode angle and different plastic flow rules in the deviatoric plane are also considered in the study of non‐coaxial influences. All the predictions indicate that the use of the non‐coaxial model makes the orientations of the principal stress and the principal strain rate different during the early stage of shearing, and they approach the same ultimate values with an increase in loading. These ultimate orientations are dependent on the density of soils, and independent of their initial stress states. The use of the non‐coaxial model also softens the shear stress evolutions, compared with the coaxial model. It is also found that the ultimate shear strengths by using the coaxial and non‐coaxial models are dependent on the plastic flow rules in the deviatoric plane. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
19.
20.
Monitoring of the progressive convergence of a tunnel shows that deformations occurring in the soil surrounding a tunnel exhibit a strong evolution with time. This time‐dependent behaviour can be linked to three essential factors: the distance from the point of interest to the working face over time, the distance of unsupported tunnel to the working face and the viscous properties of the soil. The objective of this paper is to propose a constitutive model of the time‐dependent behaviour of soil which has been developed within the framework of elastoplasticity–viscoplasticity and critical state soil mechanics. The consideration of viscoplastic characteristic sets the current model apart from the CJS (Cambou, Jafari and Sidoroff) model as the basic elastoplastic model, and introduces an additional viscous mechanism. The evolution of the viscous yield surface is governed by a particular hardening called ‘viscous hardening’ with a bounding surface. The proposed constitutive model has been applied in the analysis of tunnelling. Two kinds of numerical calculations have been used in the analysis, axisymmetric analysis and plane strain analysis. Monitoring of the progressive convergence of a tunnel conducted in the railway tunnel of Tartaiguille (France), has been used to describe the calculation procedure proposed and the capability of the model. The finite difference software, fast Lagrangian analysis of continua (FLAC), has been used for the numerical simulation of the problems. The comparison of results shows that the observed deformations could have been reasonably predicted by using the constitutive model and calculation strategy proposed. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献