首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 578 毫秒
1.
The factors influencing soil erosion may vary with scale. It remains unclear whether the spatial variation in soil erosion resistance is controlled by regional variables (e.g. precipitation, temperature, and vegetation zone) or by local specific variables (e.g. soil properties, root traits, land use, and farming operations) when the study area enlarges from a hillslope or catchment to the regional scale. This study was performed to quantify the spatial variations in soil erosion resistance to flowing water under three typical land uses along a regional transect on the Loess Plateau and to identify whether regional or local specific variables are responsible for these changes. The results indicated that the measured soil detachment capacities (Dc) of cropland exhibited an irregular trend along the regional transect. The Dc of grassland increased with mean annual precipitation, except for two sites (Yijun and Erdos). The measured Dc of woodland displayed an inverted ‘U’ shape. The changes in rill erodibility (Kr) of three land uses were similar to Dc, whereas no distinguishable trend was found for critical shear stress (τc). No significant correlation was detected between Dc, Kr and τc, and the regional variables. The spatial variation in soil erosion resistance could be explained reasonably by changes in soil properties, root traits, land use, and farming operations, rather than regional variables. The adjustment coefficient of Kr for grassland and woodland could be well simulated by soil cohesion and root mass density (R2 = 0.70, P < 0.01), and the adjustment coefficient of critical shear stress could be estimated with aggregate stability (R2 = 0.57, P < 0.01). The results are helpful for quantifying the spatial variation in soil detachment processes by overland flow and to develop process‐based erosion model at a regional scale. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

2.
Accurate prediction of soil detachment capacity is fundamental to establish process-based erosion models and improve soil loss assessment. Few studies were conducted to reveal the mechanism of detachment process for yellow soil on steep cropland in the subtropical region of China using field experiments. This study was performed to determine soil detachment characteristics and explore the relationships between soil detachment capacity (D c) and flow rate, slope gradient, mean velocity, shear stress, stream power and unit stream power. Field experiments were conducted on intact soil with flow rates ranging from 0.2 × 10−3 to 0.5 × 10−3 m−3 s−1 and slope gradients varying from 8.8 to 42.4%. The results showed the following. (a) D c of yellow soil was smaller than other soils because of its high clay content. (b) D c was more susceptible to flow than to slope gradient. Power functions were derived to depict the relationship between D c and the flow rate and slope gradient (R2 = 0.91). (c) D c was better simulated by power functions of the stream power (R2 = 0.83) than functions of the shear stress or the unit stream power. (d) Considering its accuracy, simplicity and accessibility, the power function based on flow rate and slope gradient is recommended to predict D c of yellow soil in the field. The results of this study provide useful support for revealing soil detachment mechanism and developing process-based soil erosion models for the subtropical region of China.  相似文献   

3.
There is little information on the performance of vegetative filter strips (VFS) in filtering high‐concentration sediment from subcritical overland flow. Flume experiments on simulated grass strips were conducted using combinations of three slope gradients (3°, 9° and 15°), five 1‐m‐wide slope positions (from upslope to downslope), two flow rates (60 and 20 L min‐1 m‐1) and sediment concentrations of 100–300 kg m‐3 under simulated rainfall and non‐rainfall conditions. The results showed that sediment deposition efficiency increased with VFS width as a power function. Rainfall significantly reduced sediment deposited within VFS. Higher sediment concentration corresponded to a larger sediment deposition load but reduced deposition efficiency. Flow rate had a negative effect on deposition efficiency but no effect on deposition load. Sediments were more easily deposited at the upper slope position than downslope, and the upper slope position had a higher percentage of coarse sediments. The deposited sediment had significantly greater median diameters (D50) than the inflow sediment. A greater proportion of coarse sediments larger than 25 µm in diameter were deposited, and particles smaller than 1 µm and of 10–25 µm had a better deposition performance than particles of 1–10 µm. Rainfall reduced the deposited sediment D50 at a slope gradient of 3° and had no significant influence on it at 9° or 15°. A higher sediment concentration led to a smaller D50 of the deposited sediment. Rainfall had no significant effect on overland flow velocity. Both the deposited sediment load and D50 decreased with increasing flow velocity, and flow velocity was the most sensitive factor impacting sediment deposition. The results from this study should be useful to control sediment flowing into rivers in areas with serious soil erosion. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

4.
Biological soil crusts (BSCs) cover up to 60 to 70% of the soil surface in grasslands after the ‘Grain for Green’ project was implemented in 1999 to rehabilitate the Loess Plateau. However, few studies exist that quantify the effects of BSCs on the soil detachment process by overland flow in the Loess Plateau. This study investigated the potential effects of BSCs on the soil detachment capacity (Dc), and soil resistance to flowing water erosion reflected by rill erodibility and critical shear stress. Two dominant BSC types that developed in the Loess Plateau (the later successional moss and the early successional cyanobacteria mixed with moss) were tested against natural soil samples collected from two abandoned farmland areas. The samples were subjected to flow scouring under six different shear stresses ranging from 7.15 to 24.08 Pa. The results showed that Dc decreased significantly with crust coverage under both moss and mixed crusts. The mean Dc of bare soil (0.823 kg m?2 s?1) was 2.9 to 48.4 times greater than those of moss covered soil (0.017–0.284 kg m?2 s?1), while it (3.142 kg m?2 s?1) was 4.9 to 149.6 times greater than those of mixed covered soil (0.021–0.641 kg m?2 s?1). The relative detachment rate of BSCs compared with bare soils decreased exponentially with increasing BSC coverage for both types of BSCs. The Dc value can be simulated by flow shear stress, cohesion, and BSC coverage using a power function (NSE ≥ 0.59). Rill erodibility also decreased with coverage of both crust types. Rill erodibility of bare soil was 3 to 74 times greater than those of moss covered soil and was 2 to 165 times greater than those of mixed covered soil. Rill erodibility could also be estimated by BSC coverage in the Loess Plateau (NSE ≥ 0.91). The effect of crust coverage on critical shear stress was not significant. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

5.
Abstract

Knowledge of rainfall characteristics is important for estimating soil erosion in arid areas. We determined basic rainfall characteristics (raindrop size distribution, intensity and kinetic energy), evaluated the erosivity of rainfall events, and established a relationship between rainfall intensity I and volume-specific kinetic energy KEvol for the Central Rift Valley area of the Ethiopian highlands. We collected raindrops on dyed filter paper and calculated KEvol and erosivity values for each rainfall event. For most rainfall intensities the median volume drop diameter (D50) was higher than expected, or reported in most studies. Rainfall intensity in the region was not high, with 8% of rain events exceeding 30 mm h-1. We calculated soil erosion from storm energy and maximum 30-min intensity for soils of different erodibility under conditions of fallow (unprotected soil), steep slope (about 9%) and no cover and management practice on the surface, and determined that 3 MJ mm ha-1 h-1 is the threshold erosivity, while erosivity of >7 MJ mm ha-1 h-1 could cause substantial erosion in all soil types in the area.
Editor Z.W. Kundzewicz; Associate Editor Q. Zhang  相似文献   

6.
Reliable assessment of the spatial distribution of soil erosion is important for making land management decisions, but it has not been thoroughly evaluated in karst geo‐environments. The objective of this study was to modify a physically based, spatially distributed erosion model, the revised Morgan, Morgan and Finney (RMMF) model, to estimate the superficial (as opposed to subsurface creep) soil erosion rates and their spatial patterns in a 1022 ha karst catchment in northwest Guangxi, China. Model parameters were calculated using local data in a raster geographic information system (GIS) framework. The cumulative runoff on each grid cell, as an input to the RMMF model for erosion computations, was computed using a combined flow algorithm that allowed for flow into multiple cells with a transfer grid considering infiltration and runoff seepage to the subsurface. The predicted spatial distributions of soil erosion rates were analyzed relative to land uses and slope zones. Results showed that the simulated effective runoff and annual soil erosion rates of hillslopes agreed well with the field observations and previous quantified redistribution rates with caesium‐137 (137Cs). The estimated average effective runoff and annual erosion rate on hillslopes of the study catchment were 18 mm and 0.27 Mg ha?1 yr?1 during 2006–2007. Human disturbances played an important role in accelerating soil erosion rates with the average values ranged from 0.1 to 3.02 Mg ha?1 yr?1 for different land uses. The study indicated that the modified model was effective to predict superficial soil erosion rates in karst regions and the spatial distribution results could provide useful information for developing local soil and water conservation plans. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

7.
Rainfall erosivity represents the primary driver for particle detachment in splash soil erosion. Several raindrop erosivity indices have been developed in order to quantify the potential of rainfall to cause soil erosion. Different types of rainfall simulators have been used to relate rainfall characteristics to soil detachment. However, rainfall produced by different rainfall simulators has different characteristics, specifically different relationships between rainfall intensity and rainfall erosivity. For this reason, the effect of rainfall characteristics produced by a dripper‐type rainfall simulator on splash soil erosion (Ds) has been investigated. The simulated rainfall kinetic energy (KE) and drop size distribution (DSD) were measured using piezoelectric transducers, modified from the Vaisala RAINCAP® rain sensor. The soil splash was evaluated under various simulated rainfall intensities ranging from 10 to 100 mm h?1 using the splash‐cup method. The simulated rainfall intensity (I) and kinetic energy relationship (I–KE) was found to be different from natural rainfall. The simulated rainfall intensity and splash soil erosion relationship (I–Ds) also followed this same trend. The I–KE relationship was found to follow the natural rainfall trend until the rainfall intensity reached 30 mm h?1 and above this limit the KE started to decrease. This emphasizes the importance of the I–KE relationship in determining the I‐Ds relationship, which can differ from one rainfall simulator to another. Ds was found to be highly correlated with KE (r = 0·85, P < 0·001), when data produced by the rainfall intensity ranged from 10 to 100 mm h?1. However, when the threshold rainfall intensity (30 mm h?1) was considered, the correlation coefficient further improved (r = 0·89, P = 0·001). Accordingly, to improve the soil splash estimation of simulated rainfall under various rainfall intensities the I–KE characterization relationship for rainfall simulators has to be taken into account. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

8.
For assessing earthquake hazard of metro cities, knowledge of soil amplification, thickness and properties of sedimentary layer are essential. In order to map the soil thickness using microtremor survey method, in Bangalore city, it is required to calibrate the relation between fundamental resonance frequency of the soil layer and its thickness for the region. For this purpose microtremor survey was carried out at 34 locations in the city where borehole log was available. The resonance frequency of the soil is evaluated from the microtremor recordings using the H/V ratio technique. A nonlinear regression relation between the thickness of sedimentary layer h (m), from the borehole logs, and the resonance frequency fr (Hz), was derived as h=(58.3±8.8)fr−(0.95)±0.1. Using the model of shear wave velocity increasing with depth at these locations, the derived average shear wave velocity and the corresponding soil thickness were used, to get an empirical relation between VS (m/s) and depth z(m), as Vs=(174±28)(1+z)0.16±0.07. This relation also compares reasonably with the fit obtained between simulated VS and depth from borehole logs for Bangalore city. The calibrated relations can be used at locations in Bangalore city where borehole logs are not available, for finding the thicknesses and shear wave velocities of the local soil layers at the survey locations.  相似文献   

9.
This paper describes the design, operation and performance of a field‐portable ‘drip‐type’ simulator and erosion measurement system. The system was constructed specifically for soil erosion research in the humid tropics and has been used extensively in Malaysian Borneo. The simulator is capable of producing replicable storms of up to 200 mm h?1 intensity and 20–30 minutes duration with a drop‐size distribution close to that of natural storms of such intensity (D50 of simulated rainfall is 4·15 mm at 200 mm h?1 and 3·65 mm at 160 mm h?1, D50 measured during natural rainfall = 3·25 mm). The simulator is portable and simply constructed and operates without a motor or electronics, thus making it particularly useful in remote, mountainous areas. The erosion measurement system allows assessment of: (1) rainsplash detachment and net downslope transport from the erosion plot; (2) slopewash (erosion transported by overland flow); and (3) infiltration capacity and overland flow. The performance of the simulator–erosion system compared with previous systems is assessed with reference to experiments carried out in primary and regenerating tropical rainforest at Danum Valley (Malaysian Borneo). The system was found to compare favourably with previous field simulators, producing a total storm kinetic energy of 727 J m?2 (over a 20‐minute storm event) and a kinetic energy rate of 0·61 J m?2 s?1, approximately half that experienced on the ground during a natural rainfall event of similar intensity, despite the shorter distance to the ground. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

10.
Many studies focus on the effects of vegetation cover on water erosion rates, whereas little attention has been paid to the effects of the below ground biomass. Recent research indicates that roots can reduce concentrated flow erosion rates significantly. In order to predict this root effect more accurately, this experimental study aims at gaining more insight into the importance of root architecture, soil and flow characteristics to the erosion‐reducing potential of roots during concentrated flow. Treatments were (1) bare, (2) grass (representing a fine‐branched root system), (3) carrots (representing a tap root system) and (4) carrots and fine‐branched weeds (representing both tap and fine‐branched roots). The soil types tested were a sandy loam and a silt loam. For each treatment, root density, root length density and mean root diameter (D) were assessed. Relative soil detachment rates and mean bottom flow shear stress were calculated. The results indicate that tap roots reduce the erosion rates to a lesser extent compared with fine‐branched roots. Different relationships linking relative soil detachment rate with root density could be established for different root diameter classes. Carrots with very fine roots (D < 5 mm) show a similar negative exponential relationship between root density and relative soil detachment rate to grass roots. With increasing root diameter (5 < D < 15 mm) the erosion‐reducing effect of carrot type roots becomes less pronounced. Additionally, an equation estimating the erosion‐reducing potential of root systems containing both tap roots and fine‐branched roots could be established. Moreover, the erosion‐reducing potential of grass roots is less pronounced for a sandy loam soil compared with a silt loam soil and a larger erosion‐reducing potential for both grass and carrot roots was found for initially wet soils. For carrots grown on a sandy loam soil, the erosion‐reducing effect of roots decreases with increasing flow shear stress. For grasses, grown on both soil types, no significant differences could be found according to flow shear stress. The erosion‐reducing effect of roots during concentrated flow is much more pronounced than suggested in previous studies dealing with interrill and rill erosion. Root density and root diameter explain the observed erosion rates during concentrated flow well for the different soil types tested. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

11.
Field determined hydraulic and chemical transport properties can be useful for the protection of groundwater resources from land-applied chemicals. Most field methods to determine flow and transport parameters are either time or energy consuming and/or they provide a single measurement for a given time period. In this study, we present a dripper-TDR field method that allows measurement of hydraulic conductivity and chemical transport parameters at multiple field locations within a short time period. Specifically, the dripper-TDR determines saturated hydraulic conductivity (Ks), macroscopic capillary length (λc), immobile water fraction (θim/θ), mass exchange coefficient (α) and dispersion coefficient (Dm). Multiple dripper lines were positioned over five crop rows in a field. Background and step solutions were applied through drippers to determine surface hydraulic conductivity parameters at 44 locations and surface transport properties at 38 locations. The hydraulic conductivity parameters (Ks, λc) were determined by application of three discharge rates from the drippers and measurements of the resultant steady-state flux densities at the soil surface beneath each dripper. Time domain reflectometry (TDR) was used to measure the bulk electrical conductivity of the soil during steady infiltration of a salt solution. Breakthrough curves (BTCs) for all sites were determined from the TDR measurements. The Ks and λc values were found to be lognormally distributed with average values of 31.4 cm h−1 and 6.0 cm, respectively. BTC analysis produced chemical properties, θim/θ, α, and Dm with average values of 0.23, 0.0036 h−1, and 1220 cm2 h−1, respectively. The estimated values of the flow and transport parameters were found to be within the ranges of values reported by previous studies conducted at nearby field locations. The dripper TDR method is a rapid and useful technique for in situ measurements of hydraulic conductivity and solute transport properties. The measurements reported in this study give clear evidence to the occurrence of non-equilibrium water and chemical movement in surface soil. The method allows for quantification of non-equilibrium model parameters and preferential flow. Quantifying the parameters is a necessary step toward determining the influences of surface properties on infiltration, runoff, and vadose zone transport.  相似文献   

12.
Soil susceptibility to detachment and transport sub-processes of erosion is generally controled by the aggregate breakdown mechanism. Measuring particle size and aggregation to the estimate erodibility potential of soils is important under erosive rainfall conditions. The Aggregate Size Distribution (ASD) is one of the most important determinants of soil structure along with soil organic matter content for describing the efficiency of applied, sustainable management strategies. This study aimed to compare the performances of three different aggregate size distribution models to predict the characteristic aggregate size parameter (median diameter, D50) for eroded sediment from interrill erosion processes of Rain- Splash Transport (RST) and Raindrop Impacted Flow Transport (RIFT). The ASDs of 1143 collected sediment samples from the RST and RIFT processes were measured and modeled by the Log-normal, Fractal, and Weibull approaches. The D50 value, as a characteristic parameter for aggregate size distributions, derived from the cumulative ASD curve was compared for soils from different land use types and different slope and rainfall intensity conditions. The performance of each model was evaluated using the Mean Square Error (MSE) and Coefficient of Determination (R^2). The Weibull approach was the most accurate model showing the best fit with the lowest MSE values (0.0002 ≤MSE≤ 0.0048) and having the greatest R2 values (0.936≤ R^2≤ 0.998) when compared with the Log-normal and Fractal models. Herewith, for semi-arid land use and soil, specific shape and scale parameters for the Weibull distribution, the respective ASDs were successfully re-generated for modeling the eroded sediment of the simulated RST and RIFT interill processes.  相似文献   

13.
A new stochastic method of detachment rate estimation was used in erosion modelling. This method was based on calculating the probability of driving forces exceeding resistance forces in the interaction of oscillating flow and structured soil. Knowledge of the probability density functions for flow velocity, soil cohesion, aggregate size and soil integrity makes it possible to calculate theoretically the erosion rate of cohesive soil for any combination of these stochastic variables. The proposed theory explains the variability in relationships between rate of detachment and flow velocity. With flow velocity, detachment rate increases more rapidly for more integrated soil with higher cohesion and larger aggregates. This theory also shows the great difference between soil erosion type for relatively high and relatively low flow velocities, and explains rather high errors, even with detailed models, in the calculation of low soil erosion rate. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

14.
Flume experiments simulating concentrated runoff were carried out on remolded silt loam soil samples (0·36 × 0·09 × 0·09 m3) to measure the effect of rainfall‐induced soil consolidation and soil surface sealing on soil erosion by concentrated flow for loess‐derived soils and to establish a relationship between soil erodibility and soil bulk density. Soil consolidation and sealing were simulated by successive simulated rainfall events (0–600 mm of cumulative rainfall) alternated by periods of drying. Soil detachment measurements were repeated for four different soil moisture contents (0·04, 0·14, 0·20 and 0·31 g g?1). Whereas no effect of soil consolidation and sealing is observed for critical flow shear stress (τcr), soil erodibility (Kc) decreases exponentially with increasing cumulative rainfall depth. The erosion‐reducing effect of soil consolidation and sealing decreases with a decreasing soil moisture content prior to erosion due to slaking effects occurring during rapid wetting of the dry topsoil. After about 100 mm of rainfall, Kc attains its minimum value for all moisture conditions, corresponding to a reduction of about 70% compared with the initial Kc value for the moist soil samples and only a 10% reduction for the driest soil samples. The relationship estimating relative Kc values from soil moisture content and cumulative rainfall depth predicts Kc values measured on a gradually consolidating cropland field in the Belgian Loess Belt reasonably well (MEF = 0·54). Kc is also shown to decrease linearly with increasing soil bulk density for all moisture treatments, suggesting that the compaction of thalwegs where concentrated flow erosion often occurs might be an alternative soil erosion control measure in addition to grassed waterways and double drilling. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

15.
Soil loss is a global environmental problem resulting from the erosion process caused by many factors,including land use and slope position. Estimation of total soil loss from agricultural fields is useful for understanding the consequences of historical and current erosion. The main purposes of the current study are to explore the application of magnetic measurements in the mapping and measuring soil redistribution in cultivated(MZ13) and forested(MZ17) transects in a Moroccan subcatchment, to ...  相似文献   

16.
Reviewing 92 measurements of lunar sample dielectric constant versus density at frequencies above 100 kHz, gives the relationK′ = (1.93 ± 0.17)p by regression analysis, where K′ is the dielectric constant of a soil or solid at a density ofpg/cm3. This formula is the geometric mean between the dielectric constant of vacuum (1) and the zero porosity dielectric constant of lunar material. Similarly, the loss tangent (D) can be described byD = [(0.00053 ± 0.00056) + (0.00025 ± 0.00009)C]p whereD is the loss tangent at densitypg/cm3 withC percent of total FeO + TiO2 (approximately proportional to ilmenite content). Using the density versus depth relations derived from lunar surface core tubes, and from laboratory studies of lunar soil compression gives a model of the dielectric properties as a function of depth in the lunar regolith. The dielectric constant increases smoothly with depth, as a function of the soil compaction only. The loss tangent, however, is more sensitive to the ilmenite content than it is to density. Neither dielectric constant nor loss tangent varies significantly with the temperature observed in a lunar day.  相似文献   

17.
Biological soil crusts (BSCs) have impacts on soil detachment process through surface covering, and binding and bonding (B&B) mechanisms, which might vary with successional stages of BSCs. This study was conducted to quantify the effects of surface covering, binding and bonding of BSCs on soil detachment capacity by overland flow in a 4 m long hydraulic flume with fixed bed. Two dominant BSC types, developed well in the Loess Plateau (the early successional cyanobacteria and the later successional moss), were tested using natural undisturbed soil samples collected from the abandoned farmlands. Two treatments of undisturbed crusts and one treatment of removing the above‐ground tissue of BSCs were designed for each BSC type. For comparison, bare loess soil was used as the baseline. The collected soil samples were subjected to flow scouring under six different shear stresses, ranging from 6.7 to 21.2 Pa. The results showed that soil detachment capacity (Dc) and rill erodibility (Kr) decrease with BSC succession, and the presence of BSCs obviously increased the critical shear stress, especially for the later successional moss crust. For the early successional cyanobacteria crust, Dc was reduced by 69.2% compared to the bare loess soil, where 37.7% and 31.5% are attributed to the surface covering and B&B, respectively. For the later successional moss crust, Dc decreased by 89.8% compared to the bare loess soil, where 68.9% and 20.9% contributed to the surface covering and B&B, respectively. These results are helpful in understanding the influencing mechanism of BSCs on soil erosion and in developing the process‐based erosion models for grassland and forestland. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

18.
Landscapes in areas of active uplift and erosion can only remain soil‐mantled if the local production of soil equals or exceeds the local erosion rate. The soil production rate varies with soil depth, hence local variation in soil depth may provide clues about spatial variation in erosion rates. If uplift and the consequent erosion rates are sufficiently uniform in space and time, then there will be tendency toward equilibrium landforms shaped by the erosional processes. Soil mantle thickness would adjust such that soil production matched the erosion. Previous work in the Oregon Coast Range suggested that there may be a tendency locally toward equilibrium between hillslope erosion and sediment yield. Here results from a new methodology based on cosmogenic radionuclide accumulation in bedrock minerals at the base of the soil column are reported. We quantify how soil production varies with soil thickness in the southern Oregon Coast Range and explore further the issue of landscape equilibrium. Apparent soil production is determined to be an inverse exponential function of soil depth, with a maximum inferred production rate of 268 m Ma?1 occurring under zero soil depth. This rate depends, however, on the degree of weathering of the underlying bedrock. The stochastic and large‐scale nature of soil production by biogenic processes leads to large temporal and spatial variations in soil depth; the spatial variation of soil depth neither supports nor rejects equilibrium morphology. Our observed catchment‐averaged erosion rate of 117 m Ma?1 is, however, similar to that estimated for the region by others, and to soil production rates under thin and intermediate soils typical for the steep ridges. We suggest that portions of the Oregon Coast Range may be eroding at roughly the same rate, but that local competition between drainage networks and episodic erosional events leads to landforms that are out of equilibrium locally and have a spatially varying soil mantle. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

19.
The Cesium-137 technique was used to estimate soil erosion in the Xihanshui River Basin.More than 100 samples were taken from 10 sites and 20 hillslopes with a 10cm diameter hand-operated core driller.Each sample was 60 cm long.The 137Cs activity was analyzed by gamma spectrometry.The simplified mass balance model and the profile distribution model were used to calculate soil erosion and deposition rate.The local 137Cs reference ranged from 1,600 to 2,402 Bq m-2.The data shows an exponential decrease of mass concentration and amount with depth in an undisturbed soil profile.Soil erosion in the river basin is moderate or severe on cultivated land with annual erosion rates of 2,000-6,000 t km-2yr-1.In general,very severe or severe soil erosion occurred at the upper slope sections,moderate or severe soil erosion at the middle section,and moderate or slight soil erosion at the lower slope sections.On the slopes with natural vegetation,consisting of herbaceous and wood species,the erosion rate is much lower or not detectable.On the lower section of slopes with well-developed vegetation however,there was no soil loss,instead deposition occurred at a rate of more than 300 t km-2 yr-1.The slope gradient and vegetation cover affected soil erosion and deposition rates.In general,the rate of soil erosion was proportional to the slope gradient and inversely proportional to the degree of vegetative cover.  相似文献   

20.
The aim of this study is to identify, in a small catchment area located within a tropical forest, the pedological compartments in which the export of nutrients and chemical erosion of solutes occur during a stormflow event. The catchment area displays two types of lateral flow: (i) overland flow at the surface of the soil in the litter and root mat and (ii) groundwater flow in a macroporous subsurface horizon. We interpret the variations of stream‐water chemistry during a storm‐flow event using the separation of storm‐flow hydrograph data between overland and groundwater flow, and (Cl?) as a chemical parameter characterizing the residence time of water in the soil. It appears that K+ especially was released into the throughfall, whereas Ca++, Mg++ and Na+ were clearly released from the litter. K+ disappeared rapidly from soil solution, whereas Ca++ and Mg++ were more progressively absorbed by the vegetation. The Ca++ and Mg++ contents in groundwater increased with increasing residence time owing to the transpiration of trees. The export of H4SiO4 in the overland flow was moderate, i.e. 24% of total H4SiO4 export in the stream flow, as overland flow represented 39% of total runoff. The subsurface horizon—where active groundwater flow occurs—was successively affected by chemical erosion during the storm‐flow peak, and then by neoformation of kaolinite favoured by increasing water residence time. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号