共查询到18条相似文献，搜索用时 421 毫秒
1.
非均质介质中溶质迁移往往出现非费克现象,传统的对流弥散方程(ADE)则难以较好地描述这种现象.采用连续时间的随机游走理论(CTRW)研究1250cm长一维非均质土柱中溶质运移问题,探讨CTRW模型中参数及非费克迁移的变化特征.研究结果表明,β值的大小与介质的非均质特征有关,非均质性越强,β值越小,但β值具有相对的稳定性,然而ADE的弥散系数则具有随尺度增大而增大的现象.对于介质非均质性较强和非费克现象较明显的溶质穿透曲线,尤其是在拖尾部分,与ADE相比,CTRW具有较高的模拟精度. 相似文献
2.
非均质含水层中渗流与溶质运移研究进展 总被引：1，自引：1，他引：0
含水层的非均质性控制着地下水渗流和溶质迁移特性,准确定量化描述非均质含水层中的渗流和溶质迁移问题受到广泛关注,已成为地球科学领域中的研究热点。首先从非均质含水层地下水流和溶质迁移理论模型、矩分析、多尺度进行系统综述,指出尺度转换在目前水文地质研究中主要解决的问题以及存在的问题;其次从非均质含水层场地试验、不确定性以及速度连通性等方面分析了该方向的研究进展;最后指出地球物理反演含水层非均质性、随机理论与随机模拟软件开发、尺度转换及速度连通性的不确定性问题、非均质性与水文地质条件关系研究4个方面是该领域今后的主要研究方向。 相似文献
3.
对于地下水流场及其参数分布无序的非线性问题,污染物在其迁移便不可能服从对流-弥散方程所描述的规律。那么,锶、铀在非均匀介质中迁移会发生什么样的异常变化是提出地下水污染预测方法与模式的前提。根据野外调查的水文地质特征,设计出模拟迁移的试验研究的模式系统。试验表明,非均质试验柱的迁移曲线与均质的迁移曲线,总体特征有显著区别;透镜状和盲洞型非均质对迁移的影响及其环境效应是双向的,即有利面是降低了污染强度,且可降低10%～30%;不利面是延长了污染作用的时间,使污染作用时间延长3～5倍。另外,合理地解释了所谓“双峰”和“多峰”迁移曲线机制。 相似文献
4.
5.
6.
盐渍土壤中的物理化学作用对溶质运移具有重要影响.吸附和离子交换作用是土壤中常见的反应.利用室内土柱出流实验对这两种作用下的单组分和多组分溶质运移进行了探讨,用CXTFIT软件模拟了只考虑对流-弥散的常规溶质运移;用水文地球化学模拟软件PHREEQC进行了耦合吸附和离子交换反应的模拟.结果表明,土壤质地对单组分溶质的运移具有重要影响,而在多组分溶质运移中,组分之间的相互作用对溶质运移具有更为重要的影响,并且耦合物理化学作用的模拟精度更高. 相似文献
7.
波浪会促进海水中溶质向海底沉积物运移,但已有研究大多未考虑海床（海底沉积物）变形效应的影响。为揭示波浪作用下海床土变形对溶质运移过程的影响机制,构建了考虑海床土变形影响的溶质运移计算模型,对波浪作用下溶质向砂质海底沉积物中的运移过程进行模拟。结果表明:海床土变形会增大孔隙水流速,进而增大溶质纵向水动力弥散系数,增强溶质运移的机械弥散作用,促进溶质向沉积物中运移;考虑海床变形时的溶质最大纵向水动力弥散系数可达不考虑海床变形时的8.5倍,约为分子扩散系数的545倍;海床土剪切模量越小,土体变形效应越明显,对溶质运移过程的影响越大;海床土饱和度的降低,会进一步加速波浪作用下溶质向海底沉积物的运移过程。 相似文献
8.
探讨了将蒙特卡罗(Monte Carlo)方法应用于多尺度非均质含水层中溶质运移模拟的方法。所研究的含水层由两种具有不同渗透系数统计特征的多孔介质所组成,每一种多孔介质是非均质的,且其渗透系数场符合平稳假设,而整个模拟区的渗透系数是非平稳的。Monte Carlo方法要求参数是平稳的,因此,分别对两种多孔介质产生若干随机渗透系数场后,用两种方法进行组合,并进行溶质运移的模拟计算。通过对计算结果的分析,综合考虑计算精度、计算时间等因素,得出了处理多尺度非均质多孔介质中溶质运移问题的较好方法。 相似文献
9.
为研究江汉平原—大别山区过渡带黏性层状土中溶质迁移的规律,以保守性阴离子Br-为示踪剂,通过等温吸附试验、一维弥散试验、HYDRUS-1D软件模拟反演手段,研究了Br-在黏性层状土中的吸附参数、迁移规律,模拟反演其弥散参数。结果表明：（1）Freundlich模型和Langmuir模型均能较好的拟合吸附试验结果,随着土壤中黏粒比例的增大,土壤对Br-的饱和吸附量有所增加;（2）层状土中土壤质地与结构均会影响穿透曲线的形状,但一维饱和土柱中的弥散过程主要取决于含水介质系统中黏性颗粒的占比,黏粒的增加会对溶质运移产生阻碍作用;（3）通过HYDRUS-1D软件构建模型反演弥散参数,R2均大于0.991,拟合效果较好,分析发现层状土中无论土壤组成类型还是层厚及排序的影响,其本质都是改变了土壤的平均孔隙流速从而影响弥散作用,平均孔隙流速越小其弥散系数越小;（4）试验中粉质黏土弥散系数约为0.005～0.048 cm2/d,远远小于下部砂土弥散系数0.524～7.477 cm2/d,差值达到了至少两个数量级,表明研究区内厚层黏土为控制地层,会较大程度阻碍地下水中溶质运移,上部含水层中的污染物或有机... 相似文献
10.
为弥补当前河岸带水热交换模拟对土体非均质传热考虑不足的缺陷,在饱和-非饱和渗流及多孔介质传热理论基础上,引入土体有效导热系数模型,构建考虑土体非均质传热的河岸带水热耦合模型。结合COMSOL软件的特点,给出河岸带水热耦合模型的实现方法及求解流程,并通过河岸带温度和水位原型观测资料验证和对比分析不同有效导热系数模型下河岸带水热耦合模型的模拟效果。结果表明:与传统不考虑土体非均质传热方法相比,该模型能够较好地反映河岸带水热交换过程。此外,基于Johansen有效导热系数模型的河岸带水热耦合模型模拟效果表现最佳,模拟结果与前人试验结果一致。研究成果可为河岸带水热交换及污染物迁移过程的深入研究提供技术支撑。 相似文献
11.
Emin Ciftci Cem B. Avci Osman S. Borekci A. Ufuk Sahin 《Environmental Earth Sciences》2012,67(8):2399-2409
Groundwater solute transport phenomena typically occur in water-bearing zones with heterogeneous solute dispersive characteristics and/or media hydraulic properties. A radial basis function collocation method (RBFCM)-based numerical method was developed in order to investigate the ability of RBFCM to accurately portray solute transport phenomena under heterogeneous conditions. Simulations were performed for 1-D and 2-D transport scenarios in which scale-dependent dispersivity fields were taken into consideration and compared with available analytical solutions. Different radial basis functions (RBFs) were employed for assessing the sensitivity of the present method on the selected RBFs. The simulation results were also compared with the results of MT3DMS which is a modular three-dimensional transport model with alternative solution schemes including the method of characteristics, the implicit central finite difference and the third order total variation diminishing finite volume. The proposed model was also used to simulate a real case condition where solute transport through a two-layer soil medium had been investigated experimentally. The results showed that RBFCM represented a powerful tool for predicting the solute transport occurrence under heterogeneous conditions with high accuracy. 相似文献
12.
13.
14.
土壤中水分和溶质运移一直是土壤-水环境系统中的研究热点,也是目前仍未得到很好解决的问题.将分形理论应用于土壤水分溶质运移机制的研究,探讨其领域中的众多复杂问题,是一种全新的思路和方法.在对土壤结构定量化的分形表征进行简要阐述的基础上,重点介绍了分形理论在水分特征曲线和水力传导度等土壤水分运动基本参数的分形模型、土壤水分运移过程模拟、土壤溶质运移的非费克现象、弥散度的尺度效应以及溶质运移机制研究方面所取得的一系列成果,并就分形理论今后在土壤水分、溶质运移研究中的应用作了展望. 相似文献
15.
Water flow is greatly influenced by the characteristics of the domain through which the process occurs. It is generally accepted that earth materials have extreme variations from point to point in space. Consequently, this heterogeneity results in high variation in hydraulic properties of soil. In order to develop an accurate predictive model for transport processes in soil, the effects of this variability should be considered. In this study a two‐dimensional stochastic finite element flow model was developed for simulation of water flow through unsaturated soils. In this model, the stochastic partial differential governing equation of water flow, obtained from implementation of the perturbation‐spectral stochastic method on classical Richard's equation, was solved using a finite element method in the space domain and a finite difference scheme in the time domain. The effective hydrological parameters embedded in the mathematical model depend on time derivatives of capillary tension head; this makes possible to consider the hysteresis due to large‐scale variability of soil hydrological properties. The model is also capable of simulating infiltration and evaporation events and rapid change in the land surface boundary condition from one type event to another, based on a scheme used in the model for implementation of land surface boundary condition. The model was validated with the data obtained from a layered lysimeter test. The model was also used to simulate water flow under a long irrigation furrow. The results obtained with this model show better agreement with experimental measurements in comparison with a deterministic model. The possible reason for this agreement is that in the developed model, the influence of the variability of the properties of soil and effects of parameter hysteresis on water flow and water content redistribution are considered. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
16.
18.
Shear‐lag analysis is used to obtain closed‐form solutions for the problem of a stiff inclusion embedded in a poroelastic soil matrix. The following assumptions are made: the soil matrix and the inclusion are elastic; plane strain conditions apply; and shear stresses at the soil‐inclusion interface follow Coulomb's friction law. Two solutions are obtained, the first one for drained conditions where no excess pore pressures are generated, and the second one for undrained conditions where excess pore pressures are produced and the soil does not change volume during pullout. The solutions are verified by comparing analytical predictions with numerical results obtained using a finite element method. Predictions from the analytical solutions are also compared with results from experiments conducted in a large‐scale pullout box. Both comparisons show good agreement. The analytical solution shows that the pullout capacity in drained and undrained conditions is overall independent of the relative stiffness of the soil and the inclusion. The most important factor controlling the pullout capacity is the coefficient of friction between the soil and the inclusion. Both drained and undrained pullout capacities increase with the coefficient of friction; although the drained capacity shows a proportional increase, it is not so for the undrained capacity. The ratio of undrained to drained pullout capacity is about 0.9 for friction coefficients smaller than 0.2, but can be as small as 0.6 for a coefficient of friction of 1.0. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献