首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 593 毫秒
1.
Radarclinometry is a powerful technique for estimating heights of landforms in synthetic aperture radar (SAR) images of planetary surfaces. In particular, it has been used to estimate heights of dunes in the sand seas of Saturn’s moon Titan (Lorenz, R.D., and 39 colleagues [2006]. Science 312, 724-727). In this work, we verify the technique by comparing dune heights derived from radarclinometry to known topography of dune fields in the Namib sand sea of western Africa. We compared results from three different image grid spacings, and found that 350 m/pixel (the same spacing at which the Cassini RADAR data was processed) is sufficient to determine dune height for dunes of similar morphometry to those of the Namib sand sea. At this grid spacing, height estimates derived from radarclinometry are largely representative of, though may underestimate by as much as 30%, or overestimate by as much as 40%, true dune height. Applying the technique to three regions on Titan, we estimate dune heights of 45-180 m, and dune spacings of 2.3-3.3 km. Obtaining accurate heights of Titan’s dunes will help to constrain the total organic inventory on Titan.  相似文献   

2.
Observations of Titan obtained by the Cassini Visual and Infrared Mapping Spectrometer (VIMS) have revealed Selk crater, a geologically young, bright-rimmed, impact crater located ∼800 km north-northwest of the Huygens landing site. The crater rim-crest diameter is ∼90 km; its floor diameter is ∼60 km. A central pit/peak, 20-30 km in diameter, is seen; the ratio of the size of this feature to the crater diameter is consistent with similarly sized craters on Ganymede and Callisto, all of which are dome craters. The VIMS data, unfortunately, are not of sufficient resolution to detect such a dome. The inner rim of Selk crater is fluted, probably by eolian erosion, while the outer flank and presumed ejecta blanket appear dissected by drainages (particularly to the east), likely the result of fluvial erosion. Terracing is observed on the northern and western walls of Selk crater within a 10-15 km wide terrace zone identified in VIMS data; the terrace zone is bright in SAR data, consistent with it being a rough surface. The terrace zone is slightly wider than those observed on Ganymede and Callisto and may reflect differences in thermal structure and/or composition of the lithosphere. The polygonal appearance of the crater likely results from two preexisting planes of weakness (oriented at azimuths of 21° and 122° east of north). A unit of generally bright terrain that exhibits similar infrared-color variation and contrast to Selk crater extends east-southeast from the crater several hundred kilometers. We informally refer to this terrain as the Selk “bench.” Both Selk and the bench are surrounded by the infrared-dark Belet dune field. Hypotheses for the genesis of the optically bright terrain of the bench include: wind shadowing in the lee of Selk crater preventing the encroachment of dunes, impact-induced cryovolcanism, flow of a fluidized-ejecta blanket (similar to the bright crater outflows observed on Venus), and erosion of a streamlined upland formed in the lee of Selk crater by fluid flow. Vestigial circular outlines in this feature just east of Selk’s ejecta blanket suggest that this might be a remnant of an ancient, cratered crust. Evidently the southern margin of the feature has sufficient relief to prevent the encroachment of dunes from the Belet dune field. We conclude that this feature either represents a relatively high-viscosity, fluidized-ejecta flow (a class intermediate to ejecta blankets and long venusian-style ejecta flows) or a streamlined upland remnant that formed downstream from the crater by erosive fluid flow from the west-northwest.  相似文献   

3.
Fine-resolution (500 m/pixel) Cassini Visual and Infrared Mapping Spectrometer (VIMS) T20 observations of Titan resolve that moon's sand dunes. The spectral variability in some dune regions shows that there are sand-free interdune areas, wherein VIMS spectra reveal the exposed dune substrate. The interdunes from T20 are, variously, materials that correspond to the equatorial bright, 5-μm-bright, and dark blue spectral units. Our observations show that an enigmatic “dark red” spectral unit seen in T5 in fact represents a macroscopic mixture with 5-μm-bright material and dunes as its spectral endmembers. Looking more broadly, similar mixtures of varying amounts of dune and interdune units of varying composition can explain the spectral and albedo variability within the dark brown dune global spectral unit that is associated with dunes. The presence of interdunes indicates that Titan's dunefields are both mature and recently active. The spectrum of the dune endmember reveals the sand to be composed of less water ice than the rest of Titan; various organics are consistent with the dunes' measured reflectivity. We measure a mean dune spacing of 2.1 km, and find that the dunes are oriented on the average in an east-west direction, but angling up to 10° from parallel to the equator in specific cases. Where no interdunes are present, we determine the height of one set of dunes photoclinometrically to be between 30 and 70 m. These results pave the way for future exploration and interpretation of Titan's sand dunes.  相似文献   

4.
Vertical impacts on the Earth of asteroids 500-3000 km in diameter at 15 km/s have been numerically modelled using the hydrodynamic SOVA code. This code has been modified for the spherical system of coordinates well suited for simulations of very large impacts when the entire Earth is involved in motion. The simulations include cratering process, upward motion of deep mantle layers, fall of ejecta on the Earth, escape of matter to space, and formation of rock vapour atmospheres. The calculations were made for the period preceding disappearance of rock vapour atmospheres caused by radiation several years after the largest impacts. For very large vertical impacts at 15 km/s, escaping masses proved to be negligibly small. Quantities of kinetic, internal, potential, and radiated away energies are obtained as functions of time and space. After the impacts, a global layer of condensed ejecta covers the whole of the Earth's surface and the ejecta energy is sufficient to vaporise an ocean 3 km deep. The mass of rock vapour atmosphere is 10-23% of the impactor mass. This atmosphere has a greater mass than the water atmosphere if impactor is 2000 km in diameter or larger.  相似文献   

5.
Lijie Han  Adam P. Showman 《Icarus》2011,212(1):262-267
We present self-consistent, fully coupled two-dimensional (2D) numerical models of thermal evolution and tidal heating to investigate how convection interacts with tidal dissipation under the influence of non-Newtonian grain-size-sensitive creep rheology (plausibly resulting from grain boundary sliding) in Europa’s ice shell. To determine the thermal evolution, we solved the convection equations (using finite-element code ConMan) with the tidal dissipation as a heat source. For a given heterogeneous temperature field at a given time, we determined the tidal dissipation rate throughout the ice shell by solving for the tidal stresses and strains subject to Maxwell viscoelastic rheology (using finite-element code Tekton). In this way, the convection and tidal heating are fully coupled and evolve together. Our simulations show that the tidal dissipation rate can have a strong impact on the onset of thermal convection in Europa’s ice shell under non-Newtonian GSS rheology. By varying the ice grain size (1-10 mm), ice-shell thickness (20-120 km), and tidal-strain amplitude (0-4 × 10−5), we study the interrelationship of convection and conduction regimes in Europa’s ice shell. Under non-Newtonian grain-size-sensitive creep rheology and ice grain size larger than 1 mm, no thermal convection can initiate in Europa’s ice shell (for thicknesses <100 km) without tidal dissipation. However, thermal convection can start in thinner ice shells under the influence of tidal dissipation. The required tidal-strain amplitude for convection to occur decreases as the ice-shell thickness increases. For grain sizes of 1-10 mm, convection can occur in ice shells as thin as 20-40 km with the estimated tidal-strain amplitude of 2 × 10−5 on Europa.  相似文献   

6.
D. Ravat 《Icarus》2011,214(2):400-412
Using model studies, the total gradient (TG) of the Z-component magnetic field is shown to be a useful quantity for delineating sources of satellite-altitude magnetic anomalies; this field is used to constrain the location and lateral boundaries of sources of high amplitude magnetic anomalies of southern highlands of Mars. The TG field suggests two parallel linear and oppositely magnetized sources of 1000 and 1800 km length separated by 1000 km of region of intervening non-parallel sources. The simplest interpretation of the long, linear features is that they are zones of multitudinous crustal scale dikes formed in separate episodes of rifting, and not features associated with the mechanism of seafloor spreading. Forward modeling with uniformly magnetized sources suggests that magnetizations of the order of 10-50 A/m (40 km thickness) over ∼100 km width in the case of the southern source and of 12.5-27.5 A/m (40 km thickness) and ∼200 km width for the northern source are necessary to explain the Z-component amplitudes and features of the TG field. If the crustal magnetization on Mars were to be distributed fractally as on Earth, magnetizations matching the largest amplitude features on Mars may be spatially correlated from a 50-100 km distance range (β ∼ 3) to approaching nearly uniform magnetization (β ∼ 5) values. To keep magnetization intensity as small as possible, the higher end of β values are preferred, whereas, small amplitude anomaly features could be generated from sources with β ∼ 3. Many of the Mars anomaly features could be coalescence effects similar to the coalescence of anomaly features observed on http://icarus.cornell.edu/information/keywords.html.Earth.  相似文献   

7.
Dunes have similar morphologies on the Earth and Mars. The main differences between Martian and terrestrial dunes are their size, which is larger on Mars, and their duration of formation, which is longer on Mars. As the characteristic time of Martian dunes is in the same order as that of the Martian climatic oscillations, Martian dunes could be recorders of past winds regimes and past climates. In order to test this hypothesis, we performed a morphological study of 550 dune fields with high resolution images and we inferred the directions of the dune formative winds from the orientation of the dune slip faces. Our study shows that 310 dune fields record one to four distinct wind directions with some geometric patterns that do not exist on the Earth such as barchans built by opposite wind directions coexisting in the same dune field. Our study demonstrates that the inferred formative wind directions are only partially in agreement with the current wind-patterns predicted by General Circulation Models (GCM). Several possible causes for the misalignment between dunes and GCM outputs are discussed: these include the local variation of the global circulation due to local topographic effects or the possibility that these dunes could be in a transient geometry or fossil. Such bedforms are considered indeed to be not in equilibrium with the present-day atmospheric conditions. This latter hypothesis is supported by the presence, in some ergs, of closely spaced dunes showing nearly opposite slip face orientations. Therefore, we propose that Martian dune fields are constituted, in some cases, by active and fossil dunes and therefore have the potential to preserve information on paleoclimates over extensive periods.  相似文献   

8.
Large expanses of linear dunes cover Titan’s equatorial regions. As the Cassini mission continues, more dune fields are becoming unveiled and examined by the microwave radar in all its modes of operation (SAR, radiometry, scatterometry, altimetry) and with an increasing variety of observational geometries. In this paper, we report on Cassini’s radar instrument observations of the dune fields mapped through May 2009 and present our key findings in terms of Titan’s geology and climate. We estimate that dune fields cover ∼12.5% of Titan’s surface, which corresponds to an area of ∼10 million km2, roughly the area of the United States. If dune sand-sized particles are mainly composed of solid organics as suggested by VIMS observations (Cassini Visual and Infrared Mapping Spectrometer) and atmospheric modeling and supported by radiometry data, dune fields are the largest known organic reservoir on Titan. Dune regions are, with the exception of the polar lakes and seas, the least reflective and most emissive features on this moon. Interestingly, we also find a latitudinal dependence in the dune field microwave properties: up to a latitude of ∼11°, dune fields tend to become less emissive and brighter as one moves northward. Above ∼11° this trend is reversed. The microwave signatures of the dune regions are thought to be primarily controlled by the interdune proportion (relative to that of the dune), roughness and degree of sand cover. In agreement with radiometry and scatterometry observations, SAR images suggest that the fraction of interdunes increases northward up to a latitude of ∼14°. In general, scattering from the subsurface (volume scattering and surface scattering from buried interfaces) makes interdunal regions brighter than the dunes. The observed latitudinal trend may therefore also be partially caused by a gradual thinning of the interdunal sand cover or surrounding sand sheets to the north, thus allowing wave penetration in the underlying substrate. Altimetry measurements over dunes have highlighted a region located in the Fensal dune field (∼5° latitude) where the icy bedrock of Titan is likely exposed within smooth interdune areas. The hemispherical assymetry of dune field properties may point to a general reduction in the availability of sediments and/or an increase in the ground humidity toward the north, which could be related to Titan’s asymmetric seasonal polar insolation. Alternatively, it may indicate that either the wind pattern or the topography is less favorable for dune formation in Titan’s northern tropics.  相似文献   

9.
Although it is mostly accepted that the lower part of the ice shell of Europa is actively convective, there is still much uncertainty about the flow mechanism dominating the rheology of this convective layer, which largely depends on the grain size of the ice. In this work, we examined thermal equilibrium states in a tidally heated and strained convective shell, for two rheologies sensitive to grain size, grain boundary sliding and diffusion creep. If we take a lower limit of 70 mW m−2 for the surface heat flow, according to some geological features observed, the ice grain size should be less than 2 or 0.2 mm for grain boundary sliding or diffusion creep respectively. If in addition the thickness of the ice shell is constrained to a few tens of kilometers and it is assumed that the thickness of the convective layer is related to lenticulae spacing, then grain sizes between 0.2 and 2 mm for grain boundary sliding, and between 0.1 and 0.2 mm for diffusion creep are obtained. Also, local convective layer thicknesses deduced from lenticulae spacing are more similar to those here derived for grain boundary sliding. Our results thus favor grain boundary sliding as the dominant rheology for the water ice in Europa's convective layer, since this flow mechanism is able to satisfy the imposed constraints for a wider range of grain sizes.  相似文献   

10.
Springtime low albedo features, called Dark Dune Spots, on the seasonal frost covered dunes on Mars between 77°N and 84°N latitude have been analyzed. Two groups of these spots have been identified: “small” and “large” ones, where large spots have diameters above 4 m, and complex internal structure. From these “large” spots branching seepage-like features emanate and grow on the steep slopes. They show a characteristic sequence of changes: first only wind-blown features emanate from them, while later a bright circular and elevated ring forms, and dark seepage-features start from the spots. These streaks grow with a speed between 0.3 m/day and 7 m/day respectively, first only from the spots, later from all along the dune crest.During this “seepage period” the temperature is between 150 K and 180 K at a 3-9 km spatial resolution scale, indicating that CO2 ice-free parts must be present at the observed dark spots. Around the receding northern seasonal CO2 cap, an annulus of water ice lags behind, which is probably present in the spots too where the CO2 frost has sublimated. Our model estimates show in the present work and in Kereszturi et al. (Kereszturi, A., Möhlmann, D., Berczi, Sz., Ganti, T., Kuti, A., Sik, A., Horvath, A. [2009b]. Icarus 201, 492-503) that the warming driven by solar insolation may produce not only interfacial water, but also bulk brines around the dune grains. The brine can support the movement of liquids and dune grains, enhances the sublimation of CO2 frost, and produce the dark features, as well as liquid modifies the optical properties of the surface.Signs of movement of dune material after the total defrosting of the terrain is also visible but it is uncertain because of the limit of resolution. In our previous work (Kereszturi et al., 2009b) we showed that resembling seepage-like streaks at the southern hemisphere might have been formed by ephemeral interfacial water, as well as these northern features. Such wet environments may have astrobiological importance too.  相似文献   

11.
C.C. Reese  C.P. Orth 《Icarus》2011,213(2):433-442
We show that a sufficiently energetic impact can generate a melt volume which, after isostatic adjustment and differentiation, forms a spherical cap of crust with underlying depleted mantle. Depending on impact energy and initial crustal thickness, a basin may be retained or impact induced crust may be topographically elevated. Retention of a martian lowland scale impact basin at impact energies ∼3 × 1028-3 × 1029 J requires an initial crustal thickness greater than 10 km. Formation of impact induced crust with size comparable to the martian highlands requires a larger impact energy, ∼1-3 × 1030 J, and initial crustal thickness <20 km. Furthermore, we show that the boundary of impact induced crust can be elliptical due to a spatially asymmetric impact melt volume caused by an oblique impact. We suggest the term “impact megadome” for topographically elevated, impact induced crust and propose that processes involved in megadome formation may play an important role in the origin of the martian crustal dichotomy.  相似文献   

12.
Amy C. Barr  Lauren J. Preuss 《Icarus》2010,208(1):499-503
Recent high-resolution Cassini images of the south polar terrain of Enceladus reveal regions of short-wavelength deformation, inferred to be compressional folds between the Baghdad and Damascus tiger stripes (Spencer, J.R., Barr, A.C., Esposito, L.W., Helfenstein, P., Ingersoll, A.P., Jaumann, R., McKay, C.P., Nimmo, F., Waite, J.H. [2009a]. Enceladus: An active cryovolcanic satellite. In: Saturn after Cassini-Huygens. Springer, New York, pp. 683-722). Here, we use Fourier analysis of the bright/dark variations to show that the folds have a dominant wavelength of 1.1 ± 0.4 km. We use the simple model of lava flow folding from Fink (Fink, J. [1980]. Geology 8, 250-254) to show that the folds could form in an ice shell with an upper high-viscosity boundary layer of thickness <400 m, with a driving stress of 40-80 kPa, and strain rate between 10−14 s−1 and 10−12 s−1. Such deformation rates imply resurfacing of the SPT in 0.05-5 Myr, consistent with its estimated surface age. Measurements of fold topography and more sophisticated numerical modeling can narrow down the conditions of fold formation and provide valuable constraints on the thermal structure of the ice shell on Enceladus.  相似文献   

13.
A. Rivoldini  T. Van Hoolst 《Icarus》2011,213(2):451-472
Knowledge of the interior structure of Mars is of fundamental importance to the understanding of its past and present state as well as its future evolution. The most prominent interior structure properties are the state of the core, solid or liquid, its radius, and its composition in terms of light elements, the thickness of the mantle, its composition, the presence of a lower mantle, and the density of the crust. In the absence of seismic sounding only geodesy data allow reliably constraining the deep interior of Mars. Those data are the mass, moment of inertia, and tides. They are related to Mars’ composition, to its internal mass distribution, and to its deformational response to principally the tidal forcing of the Sun. Here we use the most recent estimates of the moment of inertia and tidal Love number k2 in order to infer knowledge about the interior structure of the Mars.We have built precise models of the interior structure of Mars that are parameterized by the crust density and thickness, the volume fractions of upper mantle mineral phases, the bulk mantle iron concentration, and the size and the sulfur concentration of the core. From the bulk mantle iron concentration and from the volume fractions of the upper mantle mineral phases, the depth dependent mineralogy is deduced by using experimentally determined phase diagrams. The thermoelastic properties at each depth inside the mantle are calculated by using equations of state. Since it is difficult to determine the temperature inside the mantle of Mars we here use two end-member temperature profiles that have been deduced from studies dedicated to the thermal evolution of Mars. We calculate the pressure and temperature dependent thermoelastic properties of the core constituents by using equations state and recent data about reference thermoelastic properties of liquid iron, liquid iron-sulfur, and solid iron. To determine the size of a possible inner core we use recent data on the melting temperature of iron-sulfur.Within our model assumptions the geodesy data imply that Mars has no solid inner core and that the liquid core contains a large fraction of sulfur. The absence of a solid inner is in agreement with the absence of a global magnetic field. We estimate the radius of the core to be 1794 ± 65 km and its core sulfur concentration to be 16 ± 2 wt%. We also show that it is possible for Mars to have a thin layer of perovskite at the bottom of the mantle if it has a hot mantle temperature. Moreover a chondritic Fe/Si ratio is shown to be consistent with the geodesy data, although significantly different value are also possible. Our results demonstrate that geodesy data alone, even if a mantle temperature is assumed, can almost not constrain the mineralogy of the mantle and the crust. In order to obtain stronger constraints on the mantle mineralogy bulk properties, like a fixed Fe/Si ratio, have to be assumed.  相似文献   

14.
We describe interferometric observations of the Asteroid (41) Daphne in the thermal infrared obtained with the Mid-Infrared Interferometric Instrument (MIDI) and the Auxiliary Telescopes (ATs) of the European Southern Observatory (ESO) Very Large Telescope Interferometer (VLTI). We derived the size and the surface thermal properties of (41) Daphne by means of a thermophysical model (TPM), which is used for the interpretation of interferometric data for the first time. From our TPM analysis, we derived a volume equivalent diameter for (41) Daphne of 189 km, using a non-convex 3-D shape model derived from optical lightcurves and adaptive optics images (B. Carry, private communication). On the other hand, when using the convex shape of Kaasalainen et al. (Kaasalainen, M., Mottola, S., Fulchignoni, M. [2002]. Icarus 159, 369-395) in our TPM analysis, the resulting volume equivalent diameter of (41) Daphne is between 194 and 209 km, depending on the surface roughness. The shape of the asteroid is used as an a priori information in our TPM analysis. No attempt is made to adjust the shape to the data. Only the size of the asteroid and its thermal parameters such as, albedo, thermal inertia and roughness are adjusted to the data. We estimated our model systematic uncertainty to be of 4% and of 7% on the determination of the asteroid volume equivalent diameter depending on whether the non-convex or the convex shape is used, respectively. In terms of thermal properties, we derived a value of the surface thermal inertia smaller than 50 J m−2 s−0.5 K−1 and preferably in the range between 0 and ∼30 J m−2 s−0.5 K−1. Our TPM analysis also shows that Daphne has a moderate macroscopic surface roughness.  相似文献   

15.
Lithospheric strength can be used to estimate the heat flow at the time when a given region was deformed, allowing us to constrain the thermal evolution of a planetary body. In this sense, the high (>300 km) effective elastic thickness of the lithosphere deduced from the very limited deflection caused by the north polar cap of Mars indicates a low surface heat flow for this region at the present time, a finding difficult to reconcile with thermal history models. This has started a debate on the current heat flow of Mars and the implications for the thermal evolution of the planet. Here we perform refined estimates of paleo-heat flow for 22 martian regions of different periods and geological context, derived from the effective elastic thickness of the lithosphere or from faulting depth beneath large thrust faults, by considering regional radioactive element abundances and realistic thermal conductivities for the crust and mantle lithosphere. For the calculations based on the effective elastic thickness of the lithosphere we also consider the respective contributions of crust and mantle lithosphere to the total lithospheric strength. The obtained surface heat flows are in general lower than the equivalent radioactive heat production of Mars at the corresponding times, suggesting a limited contribution from secular cooling to the heat flow during the majority of the history of Mars. This is contrary to the predictions from the majority of thermal history models, but is consistent with evidence suggesting a currently fluid core, limited secular contraction for Mars, and recent extensive volcanism. Moreover, the interior of Mars could even have been heating up during part of the thermal history of the planet.  相似文献   

16.
Heat flow calculations based on geological and/or geophysical indicators can help to constrain the thickness, and potentially the geochemical stratification, of the martian crust. Here we analyze the Warrego rise region, part of the ancient mountain range referred to as the Thaumasia highlands. This region has a crustal thickness much greater than the martian average, as well as estimations of the depth to the brittle-ductile transition beneath two scarps interpreted to be thrust faults. For the local crustal density (2900 kg m−3) favored by our analysis of the flexural state of compensation of the local topography, the crustal thickness is at least 70 and 75 km at the scarp locations. However, for one of the scarp locations our nominal model does not obtain heat flow solutions permitting a homogeneous crust as thick as required. Our results, therefore, suggest that the crust beneath the Warrego rise region is chemically stratified with a heat-producing enriched upper layer thinner than the whole crust. Moreover, if the mantle heat flow (at the time of scarp formation) was higher than 0.3 of the surface heat low, as predicted by thermal history models, then a stratified crust rise seems unavoidable for this region, even if local heat-producing element abundances lower than average or hydrostatic pore pressure are considered. This finding is consistent with a complex geological history, which includes magmatic-driven activity.  相似文献   

17.
We present a photometric model of the rings of Saturn which includes the main rings and an F ring, inclined to the main rings, with a Gaussian vertical profile of optical depth. This model reproduces the asymmetry in brightness between the east and west ansae of the rings of Saturn that was observed by the Hubble Space Telescope (HST) within a few hours after the Earth ring-plane crossing (RPX) of 10 August 1995. The model shows that during this observation the inclined F ring unevenly blocked the east and west ansae of the main rings. The brightness asymmetry produced by the model is highly sensitive to the vertical thickness and radial optical depth of the F ring. The F-ring model that best matches the observations has a vertical full width at half maximum of 13 ± 7 km and an equivalent depth of 10 ± 4 km. The model also reproduces the shape of the HST profiles of ring brightness vs. distance from Saturn, both before and after the time of ring-plane crossing. Smaller asymmetries observed before the RPX, when the Earth was on the dark side of the rings, cannot be explained by blocking of the main rings by the F ring or vice versa and are probably instead due to the intrinsic longitudinal variation exhibited by the F ring.  相似文献   

18.
The rheology of the Martian mantle and the planet's initial temperature is constrained with thermal evolution models that include crust growth and test the conditions for magnetic field generation in the core. As observations we use the present-day average crustal thickness of 50-120 km as estimated from the Mars Global Surveyor gravity and topography data, the evidence for the crust being produced mostly early, with a rate declining from the Noachian to the Hesperian, and the evidence for an early magnetic field that likely existed for less than a billion years. We use the fact that the rate of crust growth is a function of temperature, which must be above the solidus in the sub-lithosphere mantle, and the mantle convection speed because the latter determines the rate at which melt can be replenished. The convection speed is a strong function of viscosity which, in turn, is a strong function of temperature and also of the water content of the mantle. We use a viscosity parameterization with a reference viscosity evaluated at 1600 K the value of which can be characteristic of either a dry or a wet mantle. We further consider the Fe-FeS phase diagram for the core and compare the core liquidus estimated for a sulphur content of 14% as suggested by the SNC meteorite compositions with the core temperatures calculated for our cooling models. Two data sets of the Fe-FeS eutectic temperature have been used that differ by about 200 K [Böhler, R., 1996. Fe-FeS eutectic temperatures at 620 kbar. Phys. Earth Planet. Inter. 96, 181-186; Fei, Y., Bertka, C.M., Finger, L.W., 1997. High-pressure iron-sulphur compound, Fe3S2, and melting relations in the Fe-FeS system. Science 275, 1621-1623] at Martian core-mantle boundary pressure and in the eutectic composition by 5 wt%. The differences in eutectic temperature and composition translate into a difference of about 400 K in liquidus temperature for 14 wt% sulphur.We find it premature to rule out specific mantle rheologies on the basis of the presently available crustal thickness and crust growth evidence. Rather a trade-off exists between the initial mantle temperature and the reference viscosity. Both a wet mantle rheology with a reference viscosity less than 1020 Pas and a dry mantle rheology with a reference viscosity of 1021 Pas or more can be acceptable if initial mantle temperatures between roughly 1700 and 2000 K are allowed. To explain the magnetic field history, the differences in liquidus temperatures matter. For a liquidus temperature of about 1900 K at the Martian core-mantle boundary as calculated from the Böhler et al. eutectic, a dry mantle rheology can best explain the lack of a present-day dynamo. For a liquidus temperature of about 1500 K at the core-mantle boundary as calculated from the Fei et al. eutectic all models are consistent with the observed lack of dynamo action. The reason lies with the fact that at 14 wt% S the Martian core would be close to the eutectic composition if the Fei et al. data are correct. As inner core growth is unlikely for an almost eutectic core, the early field would have been generated by a thermally driven dynamo. Together with the measured strength of the Martian crustal magnetization this would prove the feasibility of a strong thermally driven dynamo.  相似文献   

19.
On Venus, present evidence indicates a crust of predominantly basaltic composition and a relatively young average age for the surface (several hundreds of millions of years). Estimates of crustal thickness from several approaches suggest an average crustal thickness of 10–20 km for much of the lowlands and rolling plains and a total volume of crust of about 1 × 1010 km3, approximately comparable to the present crustal volume of the Earth (1.02 × 1010 km3). The Earth's oceanic crust is thought to have been recycled at least 10–20 times over Earth history. The near-coincidence in present crustal volumes for the Earth and Venus suggests that either: (1) the presently observed crust of Venus represents the total volume that has accumulated over the history of the planet and that crustal production rates are thus very low, or (2) that crustal production rates are higher and that there is a large volume of missing crust unaccounted for on Venus which may have been lost by processes of crustal recycling.Known processes of crustal formation and thickening (impact-related magma ocean, vertical differentiation, and crustal spreading) are reviewed and are used as a guide to assess regional geologic evidence for the importance of these processes on Venus. Geologic evidence for variations in crustal thickness on Venus (range and frequency distribution of topography, regional slopes, etc.) are outlined. The hypothesis that the topography of Venus could result solely from crustal thickness variations is assessed and tested as an end-member hypothesis. A map of crustal thickness distribution is compiled on the basis of a simple model of Airy isostasy and global Venus topography. An assessment is then made of the significance of crustal thickness variations in explaining the topography of Venus. It is found that the distinctive unimodal hypsometric curve could be explained by: (1) a crust of relatively uniform thickness (most likely 10–20 km thick) comprising over 75% of the surface, (2) local plateaus (tessera) of thickened crust (about 20–30 km) forming less than 15% of the surface, (3) regions of apparent crustal thicknesses of 30–50 km (Beta, Ovda, Thetis, Atla Regiones and Western Ishtar Terra) forming less than 10% of the surface and showing some geologic evidence of crustal thickening processes (these areas can be explained on the basis of geologic observations and gravity data as combinations of thermal effects and crustal thickening), and (4) areas in which Airy isostasy predicts crustal thicknesses in excess of 50 km (the linear orogenic belts of Western Ishtar Terra, less than 1% of the surface).It is concluded that Venus hypsometry can be reasonably explained by a global crust of generally similar thickness with variations in topography being related to (1) crustal thickening processes (orogenic belts and plateau formation) and (2) local variations in the thermal structure (spatially varying thermal expansion in response to spatially varying heat flow). The most likely candidates for the formation and evolution of the crust are vertical differentiation and/or lateral crustal spreading processes. The small average crustal thickness (10–20 km) and the relatively small present crustal volume suggest that if vertical crustal growth processes are the dominant mechanism of crustal growth, than vertical growth has not commonly proceeded to the point where recycling by basal melting or density inversion will occur, and that therefore, rates of crustal production must have been much lower in the past than in recent history. Crustal spreading processes provide a mechanism for crustal formation and evolution that is consistent with observed crustal thicknesses. Crustal spreading processes would be characterized by higher (perhaps more Earth-like) crustal production rates than would characterize vertical differentiation processes, and crust created earlier in the history of Venus and not now observed (missing crust) would be accounted for by loss of crust through recycling processes. Lateral crustal spreading processes for the formation and evolution of the crust of Venus are interpreted to be consistent with many of the observations derived from presently available data. Resurfacing through vertical differentiation processes also clearly occurs, and if it is the major contributor to the total volume of the crust, then very low resurfacing rates are required.Although thermal effects on topography are clearly present and important on both Venus and the Earth, the major difference between the hypsometric curves on Earth (bimodal) and Venus (unimodal) is attributed primarily to the contrast in relative average thickness of the crust between the two terrains on Earth (continental/oceanic; 40/5 km = 35 km, 8:1) and Venus (upland plateaus/lowlands; about 30/15 km = 15 km, 2:1) (35 – 20 km = a difference of 20 km). The Venus unimodal distribution is thus attributed primarily to the large percentage of terrain with relatively uniform crustal thickness, with the skewness toward higher elevations due to the relatively small percentage of crust that is thickened by only about a factor of two. The Earth, in contrast, has a larger percentage of highlands (continents), whose crust is thicker by a factor of eight, on the average, leading to the distinctive bimodal hypsometric curve.Data necessary to firmly establish the dominant type of crustal formation and thickening processes operating and to determine the exact proportion of the topography of Venus that is due to thermal effects versus crustal thickness variations include: (1) global imaging data (to determine the age of the surface, the distribution and age of regions of high heat flux, and evidence for the nature and global distribution of processes of crustal formation and crustal loss), and (2) high resolution global gravity and topography data (to model crustal thickness variations and thermal contributions and to test various hypotheses of crustal growth).'Geology and Tectonics of Venus', special issue edited by Alexander T. Basilevsky (USSR Acad. of Sci. Moscow), James W. Head (Brown University, Providence), Gordon H. Pettengill (MIT, Cambridge, Massachusetts) and R. S. Saunders (J.P.L., Pasadena).  相似文献   

20.
Here we show results from thermal-infrared observations of km-sized binary near-Earth asteroids (NEAs). We combine previously published thermal properties for NEAs with newly derived values for three binary NEAs. The η value derived from the near-Earth asteroid thermal model (NEATM) for each object is then used to estimate an average thermal inertia for the population of binary NEAs and compared against similar estimates for the population of non-binaries. We find that these objects have, in general, surface temperatures cooler than the average values for non-binary NEAs as suggested by elevated η values. We discuss how this may be evidence of higher-than-average surface thermal inertia. This latter physical parameter is a sensitive indicator of the presence or absence of regolith: bodies covered with fine regolith, such as the Earth’s moon, have low thermal inertia, whereas a surface with little or no regolith displays high thermal inertia. Our results are suggestive of a binary formation mechanism capable of altering surface properties, possibly removing regolith: an obvious candidate is the YORP effect.We present also newly determined sizes and geometric visible albedos derived from thermal-infrared observations of three binary NEAs: (5381) Sekhmet, (153591) 2001 SN263, and (164121) 2003 YT1. The diameters of these asteroids are 1.41 ± 0.21 km, 1.56 ± 0.31 km, and 2.63 ± 0.40 km, respectively. Their albedos are 0.23 ± 0.13, 0.24 ± 0.16, and 0.048 ± 0.015, respectively.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号