首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 40 毫秒
1.
建筑物高度信息的快速准确获取对于城市规划管理、生态环境评价具有重要意义。本文以南京市主城区为研究区,选择2011年Geoeye-1卫星高分辨率遥感影像立体像对数据,结合Google Earth数据及实地建筑物高度测量,分别利用单幅遥感影像和立体像对计算建筑物高度,并以实测建筑物高度数据验证不同方法的提取精度,进而比较这2类方法的优缺点。结果表明:利用立体像对提取建筑物高度的方法更加精确,提取结果误差在2.8 m以内,能够快速地获取大范围建筑物高度,具有实用价值;单幅遥感影像阴影提取建筑物高度适用于建筑物高大、毗邻建筑物间隙大、周围无遮挡的情况,而立体像对提取建筑物高度不受建筑四周环境影响,在建筑物密集分布、高度均一的情况下,其普适性更强。  相似文献   

2.
单木参数对当前的森林资源管理、生态研究以及生物多样性保护等具有重要意义。无人机立体影像数据与单木识别算法为单木参数的低成本、自动化获取提供了基础。现有研究表明,常用的基于局部最大值搜索的单木识别算法面对密集林分时存在严重的漏识别问题,影响了参数提取的精度,因此本文提出了顾及单木三维形态的无人机立体影像单木识别新算法。算法首先综合利用无人机立体影像的高程与RGB光谱信息,通过随机森林分类进行林冠区的提取;然后利用形态学的多层腐蚀、膨胀与连通区标记进行树冠相连单木的分离与树冠中心点的提取,从而实现单木自动化识别。本文选取内蒙古大兴安岭林区和四川王朗林区的4块样地进行验证,以目视解译数据为参考,分别与基于高程值的局部最大值搜索算法(算法A)、基于RGB光谱亮度值的局部最大值搜索算法(算法B)进行比较。结果显示:本文提出的算法在4个样地的平均F1-score为94.17%,与算法A和算法B相比分别提高了15.85%和9.37%;而对于密集样地,本文提出的算法在查全率上相比算法A和算法B分别提高51.79%和35.64%。结果表明本文提出的算法在不同林区均能够实现较好的单木识别效果,特别是能够有效避免密集林分下的漏识别问题,为基于无人机立体影像的单木识别研究提供了一种新的思路。  相似文献   

3.
Considering the dependent relationship among wave height, wind speed, and current velocity, we construct novel trivariate joint probability distributions via Archimedean copula functions. Total 30-year data of wave height, wind speed, and current velocity in the Bohai Sea are hindcast and sampled for case study. Four kinds of distributions, namely, Gumbel distribution, lognormal distribution, Weibull distribution, and Pearson Type III distribution, are candidate models for marginal distributions of wave height, wind speed, and current velocity. The Pearson Type III distribution is selected as the optimal model. Bivariate and trivariate probability distributions of these environmental conditions are established based on four bivariate and trivariate Archimedean copulas, namely, Clayton, Frank, Gumbel-Hougaard, and Ali-Mikhail-Haq copulas. These joint probability models can maximize marginal information and the dependence among the three variables. The design return values of these three variables can be obtained by three methods: univariate probability, conditional probability, and joint probability. The joint return periods of different load combinations are estimated by the proposed models. Platform responses (including base shear, overturning moment, and deck displacement) are further calculated. For the same return period, the design values of wave height, wind speed, and current velocity obtained by the conditional and joint probability models are much smaller than those by univariate probability. Considering the dependence among variables, the multivariate probability distributions provide close design parameters to actual sea state for ocean platform design.  相似文献   

4.
Because of the intrinsic difficulty in determining distributions for wave periods, previous studies on wave period distribution models have not taken nonlinearity into account and have not performed well in terms of describing and statistically analyzing the probability density distribution of ocean waves. In this study, a statistical model of random waves is developed using Stokes wave theory of water wave dynamics. In addition, a new nonlinear probability distribution function for the wave period is presented with the parameters of spectral density width and nonlinear wave steepness, which is more reasonable as a physical mechanism. The magnitude of wave steepness determines the intensity of the nonlinear effect, while the spectral width only changes the energy distribution. The wave steepness is found to be an important parameter in terms of not only dynamics but also statistics. The value of wave steepness reflects the degree that the wave period distribution skews from the Cauchy distribution, and it also describes the variation in the distribution function, which resembles that of the wave surface elevation distribution and wave height distribution. We found that the distribution curves skew leftward and upward as the wave steepness increases. The wave period observations for the SZFII-1 buoy, made off the coast of Weihai (37°27.6′ N, 122°15.1′ E), China, are used to verify the new distribution. The coefficient of the correlation between the new distribution and the buoy data at different spectral widths (ν=0.3−0.5) is within the range of 0.968 6 to 0.991 7. In addition, the Longuet-Higgins (1975) and Sun (1988) distributions and the new distribution presented in this work are compared. The validations and comparisons indicate that the new nonlinear probability density distribution fits the buoy measurements better than the Longuet-Higgins and Sun distributions do. We believe that adoption of the new wave period distribution would improve traditional statistical wave theory.  相似文献   

5.
地理立体视频是对视频帧扩展了内外方位元素等地理空间参照的立体视频,支持基于位置的视频查询和影像量测,提供了地理空间表达的一种新形式。随着Web服务技术的广泛应用,地理立体视频Web服务将进一步拓展视频GIS应用。本文重点讨论了地理立体视频Web服务原理和系统设计。通过分析服务功能,设计了由数据层、服务层及表现层构成的地理立体视频Web服务框架;利用REST风格的Web服务技术,从资源确定、URI定义,以及资源操作接口、表述格式等方面进行了服务设计,详细定义了检索服务、视频播放服务,以及影像量测服务接口及其HTTP交互机制,以WCF框架和ArcGIS Server平台实现了相应的服务接口。本文以河南大学金明校区为例,开发了地理立体视频Web服务原型系统并进行了应用实验。结果表明,地理立体视频Web服务实现了可视化、检索及量测等功能,适合于Web环境下视频GIS应用开发,对新型可定位多媒体Web服务的标准化具有参考价值。  相似文献   

6.
针对倾角大的立体像对的相对定向不稳定等问题,提出了一种基于基础矩阵的相对定向方法,首先以SIFT匹配的同名点初步计算像对间的仿射变换,然后对影像分格网提取特征点并匹配出均匀分布的同名点,利用均匀分布的同名点通过奇异值分解方法解算基础矩阵参数,根据对应关系,将基础矩阵转化为立体像对的定向参数,最后通过相对定向严密解精确纠正定向参数。实验表明,本文的定向方法结果稳定,能够满足精度要求。  相似文献   

7.
Digital elevation models(DEMs) can be quickly and conveniently generated using very high resolution(VHR) satellite stereo images. Previous studies have evaluated and compared DEM accuracy based on VHR satellite stereo pairs collected by different satellite sensors. However, few studies analyzed the accuracy of a DEM based on stereo image pairs from a satellite with the same orbit and different orbits for a region with significant topographic fluctuations in the plateau area. Referring to former studies, this paper had two objectives: to generate a digital elevation model(DEM) and evaluate its horizontal and vertical accuracy over a plateau area with high relief; and to study the mapping capability of multiorbit and multitemporal stereo pair images in the plateau mountainous region. To achieve these objectives, we collected the 2015 Worldview-2 stereo image pair and another three World View-2 images acquired in 2013, 2014, and 2015. First, the 2015 DEM was obtained using a strict physical model based on along-track stereo image pairs, and the reliability of the DEM was verified with field data. Then, the images obtained in 2013, 2014, and 2015 were combined into different-orbit stereo image pairs, DEMs were produced using rational function models, and the DEMs were verified using field data and the 2015 DEM as standards. The results showed that the relief degree has a particular influence on the DEM, and the precision of the DEM decreases as the topographic relief increases. Off-nadir angles can also influence DEM accuracy, with a larger angle corresponding to a lower DEM accuracy. The research also shows that the DEM obtained from four sets of experiments meets the accuracy requirement of a 1:5,000 digital elevation map, digital line graphic(DLG), and digital orthophoto map(DOM). Among these four groups of DEMs, the one based on the 2015 stereo pairs with the same satellite achieved the highest precision.  相似文献   

8.
A large number of studies have been conducted to find a better fit for city rank-size distributions in different countries. Many theoretical curves have been proposed, but no consensus has been reached. This study argues for the importance of examining city rank-size distribution across different city size scales. In addition to focusing on macro patterns, this study examines the micro patterns of city rank-size distributions in China. A moving window method is developed to detect rank-size distributions of cities in different sizes incrementally. The results show that micro patterns of the actual city rank-size distributions in China are much more complex than those suggested by the three theoretical distributions examined(Pareto, quadratic, and q-exponential distributions). City size distributions present persistent discontinuities. Large cities are more evenly distributed than small cities and than that predicted by Zipf′s law. In addition, the trend is becoming more pronounced over time. Medium-sized cities became evenly distributed first and then unevenly distributed thereafter. The rank-size distributions of small cities are relatively consistent. While the three theoretical distributions examined in this study all have the ability to detect the overall dynamics of city rank-size distributions, the actual macro distribution may be composed of a combination of the three theoretical distributions.  相似文献   

9.
Ecological Niche Modeling uses the geographic coordinates of species presence records as the primary input to estimate potential geographic distributions. It is little known whether carrying out rigorous data pre-processing is necessary before building niche models to be transferred to different time period. Here we compared the current, past, and future potential distributions projected by niche models built from two different databases, an openaccess database and a database compiled ad hoc, for Handleyomys chapmani, a rodent closely associated with montane cloud forests in Mexico. The models predicted different spatial patterns of climatic suitability for the three periods examined. Based on our current knowledge of cloud forest species in Mexico, the distributions predicted by the model built from the ad hoc database are more ecologically realistic than those obtained from the open-access database. The models built using the open-access database were particularly inaccurate at the limits of the geographic range, predicting larger, more diffuse distributions for the three periods. We conclude that pre-processing occurrence data is crucial for mountain species, as the number of localities and even minor inaccuracies in the geographic coordinates can translate into very different climatic conditions due to abrupt altitudinal changes. Finally, the predicted shifts in the potential distribution of H. chapmani over time indicate that this species is highly susceptible to climate change.  相似文献   

10.
Historically, Crescent City is one of the most vulnerable communities impacted by tsunamis along the west coast of the United States, largely attributed to its offshore geography. Trans-ocean tsunamis usually produce large wave runup at Crescent Harbor resulting in catastrophic damages, property loss and human death. How to determine the return values of tsunami height using relatively short-term observation data is of great significance to assess the tsunami hazards and improve engineering design along the coast of Crescent City. In the present study, the extreme tsunami heights observed along the coast of Crescent City from 1938 to 2015 are fitted using six different probabilistic distributions, namely, the Gumbel distribution, the Weibull distribution, the maximum entropy distribution, the lognormal distribution, the generalized extreme value distribution and the generalized Pareto distribution. The maximum likelihood method is applied to estimate the parameters of all above distributions. Both Kolmogorov-Smirnov test and root mean square error method are utilized for goodness-of-fit test and the better fitting distribution is selected. Assuming that the occurrence frequency of tsunami in each year follows the Poisson distribution, the Poisson compound extreme value distribution can be used to fit the annual maximum tsunami amplitude, and then the point and interval estimations of return tsunami heights are calculated for structural design. The results show that the Poisson compound extreme value distribution fits tsunami heights very well and is suitable to determine the return tsunami heights for coastal disaster prevention.  相似文献   

11.
基于GIS的地下水流有限差数值模拟参数自动提取研究   总被引:1,自引:0,他引:1  
本文根据地下水流有限差模拟有关参数的空间分布特点,将其划分为点状、线状与面状空间分布参数三种类型。利用GIS的空间分析功能,研究基于GIS的点状、线状与面状空间分布参数自动提取的技术路线。通过点、线、面三者之间空间位置关系的拓扑分析,确定地下水开采井、水位动态监测井、线状与面状水系、模拟区域边界、面状参数分布区与模型空间离散格网之间的空间位置关系。经过矢量数据与栅格数据互相转换,实现地下水流有限差数值模拟有关参数的自动提取。结合地下水流有限差分数值模拟有关参数数据文件的结构,将基于GIS提取的栅格结构数据文件自动转换成模型所需结构的数据文件,达到模型参数数据文件的自动组织与提高地下水流数值模拟的效率目的。  相似文献   

12.
The reliability of a vertical breakwater is calculated using direct integration methods based on joint density functions. The horizontal and uplifting wave forces on the vertical breakwater can be well fitted by the lognormal and the Gumbel distributions, respectively. The joint distribution of the horizontal and uplifting wave forces is analyzed using different probabilistic distributions, including the bivariate logistic Gumbel distribution, the bivariate lognormal distribution, and three bivariate Archimedean copulas functions constructed with different marginal distributions simultaneously. We use the fully nested copulas to construct multivariate distributions taking into account related variables. Different goodness fitting tests are carried out to determine the best bivariate copula model for wave forces on a vertical breakwater. We show that a bivariate model constructed by Frank copula gives the best reliability analysis, using marginal distributions of Gumbel and lognormal to account for uplifting pressure and horizontal wave force on a vertical breakwater, respectively. The results show that failure probability of the vertical breakwater calculated by multivariate density function is comparable to those by the Joint Committee on Structural Safety methods. As copulas are suitable for constructing a bivariate or multivariate joint distribution, they have great potential in reliability analysis for other coastal structures.  相似文献   

13.
The wave crest is an important factor for the design of both fixed and floating marine structures. Wave crest height is a dominant parameter in assessing the likelihood of wave-in-deck impact and resultant severe damage. Many empirical and theoretical distribution functions for wave crest heights have been proposed, but there is a lack of agreement between them. It is of significance to develop a better new nonlinear wave crest height distribution model. The progress in the research of wave crest heights is reviewed in this paper. Based on Stokes’ wave theory, an approximate nonlinear wave crest-height distribution formula with simple parameters is derived. Two sets of measured data are presented and compared with various theoretical distributions of wave crests obtained from nonlinear wave models and analysis of the comparison is given in detail. The new crest-height distribution model agrees well with observations. Also, the new theoretical distribution is more accurate than the other methods cited in this paper and has a greater range of applications.  相似文献   

14.
The influence derived from atmosphere transmitting of radar wave, in the application of high-resolution airborne Synthetic Aperture Radar (SAR) stereo positioning, may produce some phase errors, and eventually be introduced into positioning model. This paper described the principle of airborne SAR stereo positioning and the error sources of stereo positioning accuracy that arose from atmosphere transmitting, established a corresponding assessment model of atmosphere transmitting influence, and testified the model and the assessment principle taking the 1-m resolution airborne SAR images of Zigong City, Sichuan Province in China, as the test dataset. The test result has proved that the assessment model is reliable and reasonable. And, it has shown that the phase error arisen from time delay is the main error source during the atmosphere transmitting, which has much more influences on cross-track direction and introduces a stereo positioning error of about eight meters, but less on the along-track direction.  相似文献   

15.
The statistical and distribution characteristics of the responses of a floater and its mooring lines are essential in designing floating/mooring systems.In general,the dynamic responses of offshore structures obey a Gaussian distribution,assuming that the structural system,and sea loads are linear or weakly nonlinear.However,mooring systems and wave loads are considerably nonlinear,and the dynamic responses of hull/mooring systems are non-Gaussian.In this study,the dynamic responses of two types of floaters,semi-submersible and spar platforms,and their mooring lines are computed using coupled dynamic analysis in the time domain.Herein,the statistical characteristics and distributions of the hull motion and mooring line tension are discussed and compared.The statistical distributions of the dynamic responses have strong non-Gaussianity and are unreasonably fitted by a Gaussian distribution for the two floating and mooring systems.Then,the effects of water depth,wave parameters,and low-frequency and wave-frequency components on the non-Gaussianity of the hull motion,and mooring line tension are investigated and discussed.A comparison of the statistical distributions of the responses with various probability density functions,including the Gamma,Gaussian,General Extreme Value,Weibull,and Gaussian Mixture Model(GMM)distributions,shows that the GMM distribution is better than the others for characterizing the statistical distributions of the hull motion,and mooring line tension responses.Furthermore,the GMM distribution has the best accuracy of response prediction.  相似文献   

16.
噪声信息具有空间传播和随距离衰减变化的特征,采用三维动态可视化形式表达噪声地图可以体现该特征。本文针对噪声的空间分布与强度变化提出一种噪声地图表达的方法,基于Bertin符号参量分析,以具有高度可变的方柱并配以深浅变化的颜色作为噪声符号,动态传递噪声信息。为进行多尺度地图展示,在不同地图等级下设有相应细节层次的符号尺寸和定位排列方式。噪声地图以Web端Mapbox为展示平台,基于交通噪声模型和GPS轨迹数据,对上海黄浦区某区域一时间段内的噪声情况进行模拟表达,实现噪声数据的立体动态化显示。三维动态的表达扩展了噪声数据的表现维度,多维度、多参量的立体动态符号不仅可准确刻画噪声的分布,而且从视觉观感上提高了受众的兴趣度和专注度,这为研究噪声的热点分布、传递趋势等空间规律提供了可视化参考。  相似文献   

17.
ICESat-2(Ice, Cloud and land Elevation Satellite-2)数据的平面定位精度达到米级,高程定位精度达到亚米级,但受各种外界因素的影响,部分激光足印点的高程精度较差,不能用作高程控制点。针对上述问题,本文提出一种适用于ICESat-2数据的多参数联合的高程控制点提取方法。该方法首先利用内置参数辅助检查激光足印点数据质量,滤除异常激光足印点,然后参考内置DEM(Digital Elevation Model)数据进行高程粗差剔除,最后结合云量标记、坡度参数以及时间标记属性参数设置阈值精细筛选,保留满足质量检查、坡度小、云量少的激光足印点作为最终高程控制点,并利用高精度参考高程数据进行精度验证。为验证本文方法的有效性,选取郑州西部、北科达他州西南部、印第安纳州北部地区的ICESat-2激光数据(高程平均绝对误差分别为3.711、0.582、0.333 m)进行高程控制点提取实验,实验结果表明,筛选后的激光足印点平均绝对误差分别达到0.827、0.393、0.131 m,该提取方法在多种地形场景下均能够提取出一定数量且精度较高的高程控制点,不仅能为1:50 000以及1:10 000立体测图提供数据支撑,还能为全国甚至是全球高程控制点提取和高程控制点库建设提供参考。  相似文献   

18.
采用IKONOS卫星影像进行立体测图技术的应用研究   总被引:3,自引:0,他引:3  
本文介绍了采用IKONOS高分辨率卫星立体遥感影像进行立体测图的生产工艺,控制点布设方案及质量控制方法。通过精度统计分析,确定卫星立体影像在城市测绘方面的应用范围。通过试生产,形成了一套完整的立体测图技术方法。  相似文献   

19.
为了更好地描述暴雨多变量特征,构建以GPD为边缘分布的泊松-二维Copula复合极值模型,并将其应用于成都温江站暴雨雨量和暴雨雨峰的联合概率分布计算,研究表明该模型:理论联合频率与经验联合频率吻合较好,能用于暴雨联合分布的计算;考虑了暴雨过程出现的频次,增加了概率模型的物理内涵,选取独立的暴雨过程极大值作为样本,克服了GPD阈值选取的随意性;可以推广应用于连续分布为其他的Copula函数的情形,具有广泛的应用前景。  相似文献   

20.
近年来,细颗粒物污染尤其是PM2.5受到人们越来越多的关注,研究PM2.5的时空分布规律也具有越来越重大的意义。传统的遥感反演方法模型复杂,且不能揭示近地表面的PM2.5分布规律。地面监测站的建设为PM2.5的研究提供了更实时的观测数据,但由于测量噪声的影响,观测数据存在不准确的极端异常值。为了揭示中国PM2.5的时空分布特征,本研究采用Kalman滤波对2015年中国338个城市的空气质量监测网络大数据进行最佳估计,并分析其时空特征。同时,根据中国各城市的PM2.5浓度的时序分布,采用基于DTW的K-Medoids聚类方法将其分为4个等级,并采用q统计量来评估PM2.5浓度分布的空间分层异质性。结果表明,采用Kalman滤波能有效去除数据噪声,峰值信噪比(PSNR)明显增大。在时空分布上,中国PM2.5时间分布曲线呈现“U”形,冬季PM2.5浓度明显高于夏季,且日变化曲线呈现“W”形;秋冬季PM2.5浓度的空间分层异质性非常显著,且空间分布呈现“双核分布”,重污染区主要分布在华北平原、新疆等地,西藏、广东、云南等地是稳定的空气质量优良区。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号