共查询到20条相似文献，搜索用时 31 毫秒
1.
P-SV转换波处理与传统的P-P波处理有很大的不同,如S波静校正、CCP叠加、P-SV速度分析和偏移等,其中最大的难题就是S波静校正问题.S波速度基本不受潜水面的影响,与纵波静校正没有直接相关性,有时横波静校正量能达到纵波静校正量的十倍,用纵波静校正量乘以比例系数来解决横波静校正问题将导致较大误差.同一接收点X和Z分量存在一定的初至时差,该时差代表了P波和S波在低降速带的走时差,可以利用该时差和近地表纵横波速度比信息去除低降速带对横波的影响,得到准确的静校正量.本文利用多分量初至时差推导了较为精确的横波静校正公式,再结合共检波点叠加求取剩余静校正量的方法,形成了完整的转换波静校正配套方法.利用该方法对苏里格气田二维及三维多波地震资料进行了实际处理,数据处理结果证明了该方法的有效性,该方法尤其适用于其他方法难以奏效的风化层较厚地区的横波静校正量求解,该方法也同时考虑了长波长横波静校正问题. 相似文献
2.
浅层地震反射波法和面波方法是两种相互独立发展的地震勘探方法,在各自的数据采集和处理中,对方都是作为干扰信号而存在. 本文利用浅层地震反射资料中被视为干扰的面波信号,通过成熟的多道面波勘探技术处理浅层地震反射资料,在频率-波数域中提取多阶振型面波的频散曲线,并基于该曲线反演浅地表S波速度结构. 这种方法充分开发利用了已有数据,无需单独的面波数据采集系统,同时为解释浅层地震反射资料提供了额外的信息约束. 结果表明:浅层地震反射资料中可提取出可靠的多阶振型面波频散曲线,并能给出稳定的反演结果,同时,面波反演的多解性可以通过高阶振型反演得以进一步约束;低速层的存在是观测频散曲线出现振型跳跃或呈“之”字形回折的必要条件而非充分条件. 相似文献
3.
Field static corrections in general need be applied to all onshore seismic reflection data to eliminate the disturbing effects a weathering layer or near-surface low velocity zone has on the continuity of deep seismic reflections. The traveltimes of waves refracted at the bottom of the low velocity zone (or intermediate refracting interfaces) can often be observed as first breaks on shot records and used to develop a laterally inhomogeneous velocity model for this layer, from which the field static corrections can then be obtained. A simple method is described for computing accurate field statics from first breaks. It is based on a linearization principal for traveltimes and leads to the algorithms that are widely and successfully applied within the framework of seismic tomography. We refine an initial model for the low velocity layer (estimated by a standard traveltime inversion technique) by minimizing the errors between the observed first arrivals on field records and those computed by ray theory through an initial model of the low velocity layer. Thus, one can include more lateral velocity variations within the low velocity layers, which are important to obtain good field static corrections. Traditional first break traveltime inversion methods cannot, in general, provide such refined velocity values. The technique is successfully applied to seismic data from the Amazon Basin. It is based on a simple model for the low velocity layer that consists of an undulating earth surface and one planar horizontal refractor overlain by a laterally changing velocity field. 相似文献
4.
《中国科学D辑(英文版)》2008,(Z2)
Three-component seismic exploration through P-wave source and three-component geophone is an effective technique used in complicated reservoir exploration. In three-component seismic exploration data processing,one of the difficulties is static correction of converted wave. This paper analyzes propagation characteristics of non-converted and converted refracted waves,and discovers a favor-able condition for the formation of converted refracted wave,i.e. the velocity of overlaying medium S wave is much lower than that of underlying medium S wave. In addition,the paper proposes the static correction method of converted wave based on PPS converted refracted wave,and processes the real three-component seismic data with better results of static correction of converted wave. 相似文献
5.
Experimental measurements of fracture-induced seismic waves velocity variations at frequencies ~ 1 kHz, ~ 40 kHz and ~ 1 MHz were performed directly in the field at the rocky outcrop and in the laboratory on specific rock samples collected from the outcrops. The peridotite–lherzolite outcrop appeared macroscopically uniform and contained three systems of visible parallel sub-vertical fractures. This rock has substantial bulk density and higher than average value of seismic wave velocity. The presence of fracture systems gives rise to its velocity anisotropy. The seismic waves passing through the rock fractures are subject to velocity dispersion and frequency dependent attenuation. Our data, obtained from field and laboratory measurements, were compared with theoretical model predictions. In this model we successfully used displacement discontinuity approach. For the velocity dispersion evaluation we used multi-frequency measurements. The a priori observation of orientations and densities of fracture sets allowed evaluation of their stiffness. Our approach revealed that the first arrivals of seismic waves can be used for evaluation of P-wave group velocities, the specific case, in which we expect anomalous velocity dispersion. Our observations contribute to the issue of up-scaling of well-log derived velocities in fractured rock to the scale of standard seismic exploration frequencies. 相似文献
6.
基于双差层析成像的时移层析成像方法能够获得不同时间段之间的地下介质的速度变化,且不同的数据分布和质量对结果影响较小.在本研究中我们使用云南地震区域台网所记录到的P波绝对到时及相对到时数据,利用时移层析成像方法得到了2014年鲁甸M S6.5地震发生前后震源区高精度的P波速度变化的时空分布.结果表明:2014年鲁甸地震发生后,震源区同震期P波速度下降,但没有下降至最大,而是在震后1—4个月内下降至最大,接着P波速度开始上升,震源区开始愈合,愈合过程从浅层逐渐发展至深层,逐渐恢复至震前水平.同时发现在空间上P波速度变化与余震分布变化相一致,鲁甸地震同震应力变化与速度变化之间也有较好的一致性,所以认为地震引起的应力变化是造成鲁甸地震速度变化的一个重要原因,余震的动态和静态应力造成了震源区介质物理属性的改变从而影响了P波速度的变化. 相似文献
7.
深反射地震是了解深部地质结构的主要手段,获取高品质的数据是给出合理地质解释的基础.在结晶岩地区,由于地层成层性差、非均质性严重,地震散射效应明显,导致地震波场复杂,同时结晶岩为非理想弹性体,不利于地震波能量转换,有效反射能量弱,信噪比低.加之深反射地震的目标层较深且受环境噪声干扰严重,高频信号衰减快,地震资料主频较低.这些因素使得在结晶岩区难以获得高品质的地震资料,为探索提高该类地区深反射地震资料质量的方法和技术,本文依托长江中下游成矿带2009—2014年深反射地震数据采集工作,在精细设计、严格施工的基础上,从激发和接收入手,开展了"轴向不耦合激发"、"宽频接收"和"宽线观测"等技术方法试验研究.结果表明,这些方法技术措施提高了下传弹性波能量,展宽了接收地震信号的频带,提高了覆盖次数和信噪比,有效改善了地震原始资料的品质和成像效果.研究结果对今后结晶岩地区深地震反射数据采集工作具有重要的实用价值和参考意义. 相似文献
8.
Advantages of Using Multichannel Analysis of Love Waves (MALW) to Estimate Near-Surface Shear-Wave Velocity 总被引：2，自引：1，他引：1
Jianghai Xia Yixian Xu Yinhe Luo Richard D. Miller Recep Cakir Chong Zeng 《Surveys in Geophysics》2012,33(5):841-860
As theory dictates, for a series of horizontal layers, a pure, plane, horizontally polarized shear (SH) wave refracts and reflects only SH waves and does not undergo wave-type conversion as do incident P or Sv waves. This is one reason the shallow SH-wave refraction method is popular. SH-wave refraction method usually works well defining near-surface shear-wave velocities. Only first arrival information is used in the SH-wave refraction method. Most SH-wave data contain a strong component of Love-wave energy. Love waves are surface waves that are formed from the constructive interference of multiple reflections of SH waves in the shallow subsurface. Unlike Rayleigh waves, the dispersive nature of Love waves is independent of P-wave velocity. Love-wave phase velocities of a layered earth model are a function of frequency and three groups of earth properties: SH-wave velocity, density, and thickness of layers. In theory, a fewer parameters make the inversion of Love waves more stable and reduce the degree of nonuniqueness. Approximating SH-wave velocity using Love-wave inversion for near-surface applications may become more appealing than Rayleigh-wave inversion because it possesses the following three advantages. (1) Numerical modeling results suggest the independence of P-wave velocity makes Love-wave dispersion curves simpler than Rayleigh waves. A complication of “Mode kissing” is an undesired and frequently occurring phenomenon in Rayleigh-wave analysis that causes mode misidentification. This phenomenon is less common in dispersion images of Love-wave energy. (2) Real-world examples demonstrated that dispersion images of Love-wave energy have a higher signal-to-noise ratio and more focus than those generated from Rayleigh waves. This advantage is related to the long geophone spreads commonly used for SH-wave refraction surveys, images of Love-wave energy from longer offsets are much cleaner and sharper than for closer offsets, which makes picking phase velocities of Love waves easier and more accurate. (3) Real-world examples demonstrated that inversion of Love-wave dispersion curves is less dependent on initial models and more stable than Rayleigh waves. This is due to Love-wave’s independence of P-wave velocity, which results in fewer unknowns in the MALW method compared to inversion methods of Rayleigh waves. This characteristic not only makes Love-wave dispersion curves simpler but also reduces the degree of nonuniqueness leading to more stable inversion of Love-wave dispersion curves. 相似文献
9.
Frequency‐dependent multi‐offset phase analysis of surface waves: an example of high‐resolution characterization of a riparian aquifer 
下载免费PDF全文
下载免费PDF全文 Giulio Vignoli Isabella Gervasio Giuseppe Brancatelli Jacopo Boaga Bruno Della Vedova Giorgio Cassiani 《Geophysical Prospecting》2016,64(1):102-111
Multi‐offset phase analysis of seismic surface waves is an established technique for the extraction of dispersion curves with high spatial resolution and, consequently, for the investigation of the subsurface in terms of shear wave velocity distribution. However, field applications are rarely documented in the published literature. In this paper, we discuss an implementation of the multi‐offset phase analysis consisting of the estimation of the Rayleigh wave velocity by means of a moving window with a frequency‐dependent length. This allows maximizing the lateral resolution at high frequencies while warranting stability at the lower frequencies. In this way, we can retrieve the shallow lateral variability with high accuracy and, at the same time, obtain a robust surface‐wave velocity measurement at depth. In this paper, we apply this methodology to a dataset collected for hydrogeophysical purposes and compare the inversion results with those obtained by using refraction seismics and electrical resistivity tomography. The surface‐wave results are in good agreement with those provided by the other methods and demonstrate a superior capability in retrieving both lateral and vertical velocity variations, including inversions. Our results are further corroborated by the lithological information from a borehole drilled on the acquisition line. The availability of multi‐offset phase analysis data also allows disentangling a fairly complex interpretation of the other geophysical results. 相似文献
10.
以多分量地震观测为基础,联合纵波和转换横波数据能更有效地估计地下介质的弹性和物性参数,提升地质构造成像与油气储层描述的精度.在海底多分量地震数据处理过程中,观测记录的上-下行波分解和P/S波分离可压制水层鸣震以及P与S波之间的串扰,对偏移成像和纵横波速度建模至关重要.但受海底环境、仪器与观测因素共同影响,许多海底多分量地震资料都无法基于现有的海底波场分离方法与流程取得合理的结果.本文以海底声波场与弹性波场分离基本原理为基础,通过对方法流程的修正,摆脱常规流程对中小偏移距直达波信号的依赖性.借助模拟数据实验讨论了波场分离对海底介质参数、噪声的敏感性.结合东海YQ探区海底多分量地震资料上-下行P/S波分离及其叠前深度偏移处理,验证了本文方法流程的可行性. 相似文献
11.
深反射地震剖面法为了获取深部结构特征常常采取大的偏移距采集数据.目前公开发表的相关资料中,鲜有利用深反射地震炮集数据获取近地表的结构特征.为此,本文通过正演测试了相关数据处理流程,即利用有限差分正演了起伏地表模型的大偏移距地震单炮弹性波场特征,通过共检波点域面波信号F-K频谱叠加构建新方法,从深反射地震数据集中提取了高品质的多阶面波频散曲线,再利用多阶面波联合反演获得了近地表的结构特征.在前述正演流程基础上,利用跨越班公湖—怒江缝合带的SinoProbe深反射地震剖面中的实际炮集数据,求取了基阶和一阶瑞利波频散曲线,联合反演后得到近地表横波速度结构.该结果与初至波走时反演获取的纵波速度结构具有较好的一致性,且在近地表的浅层分辨率较纵波速度结构特征更高,而更与已有地质认识相吻合.本文提供的相关数据处理流程表明利用深反射地震炮集数据,也能够获取近地表浅层的横波速度结构. 相似文献
12.
低信噪比转换波地震资料静校正(英文) 总被引：1，自引：0，他引：1
Converted waves have slow velocity and low signal-to-noise ratio. It is also difficult to pick first-breaks and bin the common-conversion-points （CCP）. Some statics methods, which work well for P-wave data, can＇t be effectively used for solving convertedwave statics problems. This has become the main obstacle to breakthroughs in convertedwave data processing. To improve converted-wave static corrections, first, a statics method based on the common-receiver-point （CRP） stack is used for the initial receiver static correction to enhance the coherency of the CRP stack. Second, a stack-power-maximization static correction which improves the continuity of the CCP stack is used for detailed receiver statics. Finally, a non-surface-consistent residual moveout correction of the CCP gathers is used to enhance the stack power of reflection signals from different depths. Converted-wave statics are solved by the joint use of the three correction methods. 相似文献
13.
南黄海海相地层的地震波场特征和层位标定一直是困扰地震勘探的重要问题.为了近距离、高精度和高分辨率地观测井周围构造特征和岩石性质引起的波场变化,为地震资料的采集、处理与解释提供地震波衰减规律、速度与层位标定等信息,对大陆架科学钻探CSDP-2井实施了近零偏移距垂直地震剖面（VSP）观测.针对海相地层顶部强反射界面地震波穿透难的问题,采用了大容量气枪震源并设计了气枪阵列组合方式,提高了激发地震波的能量,获得了强反射界面之下清晰的PP、PS下行波和上行波信号.采用了三分量偏振合成、组合滤波和波场分离等处理方法,对VSP观测数据进行处理,获得了海相三叠系—志留系的精细的纵波、横波速度结构和地层吸收因子等物性数据,建立了钻井地层、测井、VSP上行波和多道地震剖面对应关系,实现了不同尺度的地质和地球物理属性资料的有效衔接,标定了钻井地质剖面上各深度地质体的地震反射特性,厘定了过井地震剖面上反射同相轴的地质属性.此次观测取得的纵波、横波速度信息,成为建立南黄海海相地层速度模型主要的资料来源,也是地震资料的岩性反演处理不可缺少的信息. 相似文献
14.
Surface wave analysis is usually applied as a 1D tool to estimate VS profiles. Here we evaluate the potential of surface wave analysis for the case of lateral variations. Lateral variations can be characterized by exploiting the data redundancy of the ground roll contained in multifold seismic data. First, an automatic processing procedure is applied that allows stacking dispersion curves obtained from different records and which retrieves experimental uncertainties. This is carried out by sliding a window along a seismic line to obtain an ensemble of dispersion curves associated to a series of spatial coordinates. Then, a laterally constrained inversion algorithm is adopted to handle 2D effects, although a 1D model has been assumed for the forward problem solution. We have conducted different tests on three synthetic data sets to evaluate the effects of the processing parameters and of the constraints on the inversion results. The same procedure, applied to the synthetic data, was then tested on a field case. Both the synthetic and field data show that the proposed approach allows smooth lateral variations to be properly retrieved and that the introduction of lateral constraints improves the final result compared to individual inversions. 相似文献
15.
《Journal of Applied Geophysics》2006,58(2):87-98
A geophysical campaign to characterize the subsurface of a contaminated site down to a depth of several tens of meters was carried out under the HYGEIA-CEE project. On this site, seismic techniques were combined to image the geological structures; i.e. seismic reflection, P-wave tomography and spectral analysis of surface waves. Because these techniques consider different wave components in the processing, they can be expected to provide complementary information concerning the site lithology. The special feature of this experiment is the fact that the same seismic acquisition device, consisting of a mobile central unit, a drop-weight seismic source, and a sensor line of gimbal mounted geophones, was used for each of the techniques. Two perpendicular seismic lines were set up in the field for testing two geophone spacings. Three processing procedures, one each for the seismic reflection, P-wave tomography and spectral analysis of surface waves, were developed for producing seismic images from the P-wave reflectivity, the first P-wave arrivals and the dispersion of Rayleigh waves, respectively. The images show good complementarity in terms of investigation depth. The results are also in good agreement with available borehole data: the sandy layers seem to be related to low velocities, since the high velocities are better explained by the presence of clayey and gravelly intervals. The contribution and the limits of this seismic multi-approach method is discussed. 相似文献
16.
震源激发是影响地震勘探效果的一个重要因素,在油气勘探中需要选择合适的震源参数以获取较好的地震记录。本文以数值模拟方法为基础,通过使用ANSYS/LS-DYNA软件,对单井条件下不同岩土介质中柱状炸药震源激发进行了对比研究,计算得到相应的地震子波。通过对比分析各组参数对应的地震子波振幅和频谱,选择合适的激发参数。研究结果表明,在纵波速度较低的介质中,中低爆速、细长药柱炸药激发产生的地震子波频率高、能量大,而在纵波速度较高的介质中,高爆速、短粗药柱炸药激发产生的地震子波频率高、能量大。该研究结果与实际勘探结果比较符合,可为实际勘探中激发参数的选择提供参考。 相似文献
17.
Shear‐wave statics in marine seismic exploration data are routinely too large to be estimated using conventional techniques. Near‐surface unconsolidated sediments are often characterized by low values of Vs and steep velocity gradients. Minor variations in sediment properties at these depths correspond to variations in the shear‐wave velocity and will produce significant static shifts. It is suggested that a significant proportion of the shear‐wave statics solution can be estimated by performing a separate high‐resolution survey to target near‐surface unconsolidated sediments. Love‐wave, shear‐wave refraction and geotechnical measurements were individually used to form high‐resolution near‐surface shear‐wave velocity models to estimate the shear‐wave statics for a designated survey line. Comparisons with predicted statics revealed that shear‐wave statics could not be estimated using a velocity model predicted by substituting geotechnical measurements into empirical relationships. Empirical relationships represent a vast simplification of the factors that control Vs and are therefore not sufficiently sensitive to estimate shear‐wave statics. Refraction measurements are potentially sensitive to short‐wavelength variations in sediment properties when combined with accurate navigational data. Statics estimated from Love‐wave data are less sensitive, and sometimes smoothed in appearance, since interpreted velocity values represent an average both laterally and vertically over the receiver array and the frequency–depth sensitivity range, respectively. For the survey site, statics estimated from near‐surface irregularities using shear‐wave refraction measurements represent almost half the total statics solution. More often, this proportion will be greater when bedrock relief is less. 相似文献
18.
Local site effect microzonation of Lorca town (SE Spain) 总被引：1，自引：0，他引：1
M. Navarro A. García-Jerez F. J. Alcalá F. Vidal T. Enomoto 《Bulletin of Earthquake Engineering》2014,12(5):1933-1959
Local site effect assessment based on subsurface ground conditions is often the key to evaluate urban seismic hazard. The site effect evaluation in Lorca town (south-eastern Spain) started with a classification of urban geology through the geological mapping at scale 1:10,000 and the use of geotechnical data and geophysical surveys. The 17 geological formations identified were classified into 5 geological/seismic formations according to their seismic amplification capacity obtained from ambient vibration measurements as well as from simultaneous strong motion records. The shear-wave velocity structure of each geological/seismic formation was evaluated by means of inversion of Rayleigh wave dispersion data obtained from vertical-component array records of ambient noise. Nakamura’s method was applied to determine a predominant period distribution map. The spectral amplification factors were fourfold the values recorded in a reference hard-rock site. Finally, the capability of this study for explaining the damage distribution caused by the May 11th, 2011 Lorca destructive earthquake (Mw \(=\) 5.2) was examined. The methods used in this work are of assistance to evaluate ground amplification phenomena in urban areas of complex geology as Lorca town due to future earthquakes with applicability on urban seismic risk management. 相似文献
19.
We present the results of a shear-wave reflection experiment and in situ measurements in opencast lignite exploration. Near-surface coal seams have lower shear-wave velocities (～ 200 m/s) and lower densities than sand and clay layers. Due to strong reflection coefficients, a shear-wave reflection survey provides a powerful tool in lignite prospecting. Due to shorter seismic wavelengths shear waves will yield a higher resolution of shallow subsurface structure than compressional waves. Low shear-wave velocities and strong lateral velocity variations, however, require a dense data acquisition in the field. The variation of stacking velocities can exceed ± 15% within a profile length of 300 m. The different steps in processing and interpretation of results are described with actual records. The final CMP-stack shows steep-angle fault zones with maximum dislocations of 20 m within a coal seam. 相似文献
20.
Summary Earth's crust has non-uniformity in lateral as well as in vertical directions. In some tectonically significant areas, extremely rapid Love waves velocity variations have been observed. To study Love waves dispersion characteristics in such areas, two non-uniform channels with exponential velocity and rigidity variations in vertical and lateral directions are considered. Theoretical dispersion curves are presented to understand quantitatively the effect of non-uniformity in different directions by using ray theory techniques.Theoretical Geophysics Group, National Geophysical Research Institute, Hyderabad-7 (A.P. India.-NGRI Contribution No. 72-359. 相似文献