共查询到20条相似文献，搜索用时 31 毫秒
1.
面波多道分析方法(MASW)通过分析高频瑞雷波确定浅地表剪切波速度.在过去的20年中,由于该方法具有非侵入性、无损、高效及价格低的特点,越来越受到浅地表地球物理和地质工程学界的重视,视为未来最有希望的技术之一.这篇综述论文将介绍中国地质大学(武汉)浅地表地球物理团队近年来在研究高频面波的传播理论和应用中取得的部分成果.非几何波是一种仅存在于浅地表介质,尤其是未固结的沉积物中的独特的地震波.它的存在对快速而准确地获得表层S波速度有一定价值.我们的研究表明非几何波是一种具有频散特性的泄漏波.泄漏波的存在可能导致将其误认为瑞雷波的基阶或高阶能量,从而造成模式误判.这种模式误判会导致错误的反演结果.我们通过求取高基阶分离后的瑞雷波格林函数证明虚震源法瑞雷波勘探的可行性.这个结果将极大地降低野外瑞雷波勘探成本.勒夫波多道分析方法(MALW)中未知参数比瑞雷波的少,这使得勒夫波的频散曲线比瑞雷波的简单.因此,勒夫波反演更稳定,非唯一性更低.勒夫波数据生成的能量图像通常比瑞雷波的清晰,并具有更高的分辨率,从而可以更容易地拾取精确的勒夫波的相速度.利用雅克比矩阵分析波长与探测深度的关系表明对相同波长的基阶模式而言,瑞雷波的探测深度是勒夫波的1.3~1.4倍;而两种波的相同波长的高阶模式波的探测深度相同.我们也尝试了时间域勒夫波反演.按照勒夫波分辨率将地球模型剖分成了不同尺寸的块体,利用反卷积消除了地震子波对勒夫波波形的影响,通过更新每个块体的S波速度来拟合勒夫波波形,从而获得地下S波速度模型.该方法不基于水平层状模型假设,适用于任意二维介质模型. 相似文献
2.
Love and Rayleigh Wave Tomography of the Qinghai-Tibet Plateau and Surrounding Areas 总被引：8，自引：0，他引：8
Surface wave data were initially collected from events of magnitude Ms ≥ 5.0 and shallow or moderate focal depth occurred between 1980 and 2002: 713 of them generated Rayleigh waves and 660 Love waves, which were recorded by 13 broadband digital stations in Eurasia and India. Up to 1,525 source-station Rayleigh waveforms and 1,464 Love wave trains have been processed by frequency-time analysis to obtain group velocities. After inverting the path-averaged group times by means of a damped least-squares approach, we have retrieved location-dependent group velocities on a 2° × 2°-sized grid and constructed Rayleigh- and Love-wave group velocity maps at periods 10.4–105.0 s. Resolution and covariance matrices and the rms group velocity misfit have been computed in order to check the quality of the results. Afterwards, depth-dependent SV- and SH-wave velocity models of the crust and upper mantle are obtained by inversion of local Rayleigh- and Love-wave group velocities using a differential damped least-squares method. The results provide: (a) Rayleigh- and Love-wave group velocities at various periods; (b) SV- and SH-wave differential velocity maps at different depths; (c) sharp images of the subducted lithosphere by velocity cross sections along prefixed profiles; (d) regionalized dispersion curves and velocity-depth models related to the main geological formations. The lithospheric root presents a depth that can be substantiated at ~140 km (Qiangtang Block) and exceptionally at ~180 km in some places (Lhasa Block), and which exhibits laterally varying fast velocity very close to that of some shields that even reaches ~4.8 km/s under the northern Lhasa Block and the Qiangtang Block. Slow-velocity anomalies of 7–10% or more beneath southern Tibet and the eastern edge of the Plateau support the idea of a mechanically weak middle-to-lower crust and the existence of crustal flow in Tibet. 相似文献
3.
High-frequency surface-wave analysis methods have been effectively and widely used to determine near-surface shear (S) wave velocity. To image the dispersion energy and identify different dispersive modes of surface waves accurately is one of key steps of using surface-wave methods. We analyzed the dispersion energy characteristics of Rayleigh and Love waves in near-surface layered models based on numerical simulations. It has been found that if there is a low-velocity layer (LVL) in the half-space, the dispersion energy of Rayleigh or Love waves is discontinuous and ‘‘jumping’’ appears from the fundamental mode to higher modes on dispersive images. We introduce the guided waves generated in an LVL (LVL-guided waves, a trapped wave mode) to clarify the complexity of the dispersion energy. We confirm the LVL-guided waves by analyzing the snapshots of SH and P–SV wavefield and comparing the dispersive energy with theoretical values of phase velocities. Results demonstrate that LVL-guided waves possess energy on dispersive images, which can interfere with the normal dispersion energy of Rayleigh or Love waves. Each mode of LVL-guided waves having lack of energy at the free surface in some high frequency range causes the discontinuity of dispersive energy on dispersive images, which is because shorter wavelengths (generally with lower phase velocities and higher frequencies) of LVL-guided waves cannot penetrate to the free surface. If the S wave velocity of the LVL is higher than that of the surface layer, the energy of LVL-guided waves only contaminates higher mode energy of surface waves and there is no interlacement with the fundamental mode of surface waves, while if the S wave velocity of the LVL is lower than that of the surface layer, the energy of LVL-guided waves may interlace with the fundamental mode of surface waves. Both of the interlacements with the fundamental mode or higher mode energy may cause misidentification for the dispersion curves of surface waves. 相似文献
4.
Jean-Paul Montagner 《Physics of the Earth and Planetary Interiors》1985,38(1):28-50
The dispersion of surface (Rayleigh and Love) waves in the period range 40–300 s along a large number of paths, allows the estimation of both the azimuthal anisotropy and the shear-wave polarization anisotropy. The regional dispersion is determined, taking into account simultaneously its dependence with age and an azimuthal factor. The Pacific Ocean has been divided into 5 regions for Rayleigh waves and into 3 regions for Love waves. This partition discriminates the regions of extreme age which show a fast variation of dispersion with age, from the regions of intermediate age where the variation is weak. A variation of ～ 2% of Rayleigh-wave group velocity with the azimuth of the path, measured with respect to the direction of spreading is displayed, up to very long-period. On the contrary, the azimuthal anisotropy for Love waves is difficult to resolve. For Rayleigh waves, the present-day direction of plate motion seems to agree best with the direction of maximum velocity. On the other hand, the isotropic inversion of the regional dispersion curves indicates, except for young regions, a discrepancy between Rayleigh-wave and Love-wave models. With this hypothesis, SH-velocities are higher than SV-velocities for the regions older than 23 Ma, down to a depth of 300 km, which is indicative of the presence of polarization anisotropy. The latter, very weak for the young part of the ocean, increases with age and reaches 7%, for the oldest region. 相似文献
5.
Finite-Difference Modeling and Dispersion Analysis of High-Frequency Love Waves for Near-Surface Applications 总被引：3，自引：0，他引：3
Yinhe Luo Jianghai Xia Yixian Xu Chong Zeng Jiangping Liu 《Pure and Applied Geophysics》2010,167(12):1525-1536
Love-wave propagation has been a topic of interest to crustal, earthquake, and engineering seismologists for many years because it is independent of Poisson’s ratio and more sensitive to shear (S)-wave velocity changes and layer thickness changes than are Rayleigh waves. It is well known that Love-wave generation requires the existence of a low S-wave velocity layer in a multilayered earth model. In order to study numerically the propagation of Love waves in a layered earth model and dispersion characteristics for near-surface applications, we simulate high-frequency (>5 Hz) Love waves by the staggered-grid finite-difference (FD) method. The air–earth boundary (the shear stress above the free surface) is treated using the stress-imaging technique. We use a two-layer model to demonstrate the accuracy of the staggered-grid modeling scheme. We also simulate four-layer models including a low-velocity layer (LVL) or a high-velocity layer (HVL) to analyze dispersive energy characteristics for near-surface applications. Results demonstrate that: (1) the staggered-grid FD code and stress-imaging technique are suitable for treating the free-surface boundary conditions for Love-wave modeling, (2) Love-wave inversion should be treated with extra care when a LVL exists because of a lack of LVL information in dispersions aggravating uncertainties in the inversion procedure, and (3) energy of high modes in a low-frequency range is very weak, so that it is difficult to estimate the cutoff frequency accurately, and “mode-crossing” occurs between the second higher and third higher modes when a HVL exists. 相似文献
6.
High-frequency (≥ 2 Hz) Multi-channel Analysis of Love Waves (MALW) provides a practical way to determine velocity of horizontally polarized shear (SH) waves for a layered earth model up to 30 m below the ground surface in many geological settings. The information used in the MALW method is phase of Love waves. Information on amplitude of Love waves is not utilized in the MALW method. In this paper we present a method that uses information on amplitude of high-frequency Love waves to estimate quality factors (Qs) of near-surface materials. Unlike Rayleigh waves, attenuation coefficients (amplitude) of Love waves are independent of quality factors for P waves and are function of quality factors of Love waves. In theory, a fewer parameters make the inversion of attenuation coefficients of Love waves more stable and reduce the degree of nonuniqueness. We discussed sensitivity of an inversion system based on a linear relationship between attenuation coefficients and dissipation factors (1/Qs). The sensitivity analysis suggested that damping and constraints to an inversion system are necessary to obtain a smooth and meaningful quality factor model when no other information is available. We used synthetic and real-world data to demonstrate feasibility of inversion of attenuation coefficients of high-frequency Love-wave data acquired with the MALW method for quality factors with a linear, damped and constrained system. 相似文献
7.
Feasibility of waveform inversion of Rayleigh waves for shallow shear-wave velocity using a genetic algorithm 总被引：1，自引：0，他引：1
Chong Zeng Jianghai Xia Richard D. MillerGeorgios P. Tsoflias 《Journal of Applied Geophysics》2011,75(4):648-655
Conventional surface wave inversion for shallow shear (S)-wave velocity relies on the generation of dispersion curves of Rayleigh waves. This constrains the method to only laterally homogeneous (or very smooth laterally heterogeneous) earth models. Waveform inversion directly fits waveforms on seismograms, hence, does not have such a limitation. Waveforms of Rayleigh waves are highly related to S-wave velocities. By inverting the waveforms of Rayleigh waves on a near-surface seismogram, shallow S-wave velocities can be estimated for earth models with strong lateral heterogeneity. We employ genetic algorithm (GA) to perform waveform inversion of Rayleigh waves for S-wave velocities. The forward problem is solved by finite-difference modeling in the time domain. The model space is updated by generating offspring models using GA. Final solutions can be found through an iterative waveform-fitting scheme. Inversions based on synthetic records show that the S-wave velocities can be recovered successfully with errors no more than 10% for several typical near-surface earth models. For layered earth models, the proposed method can generate one-dimensional S-wave velocity profiles without the knowledge of initial models. For earth models containing lateral heterogeneity in which case conventional dispersion-curve-based inversion methods are challenging, it is feasible to produce high-resolution S-wave velocity sections by GA waveform inversion with appropriate priori information. The synthetic tests indicate that the GA waveform inversion of Rayleigh waves has the great potential for shallow S-wave velocity imaging with the existence of strong lateral heterogeneity. 相似文献
8.
本文通过数值模拟研究了介质黏弹性对瑞雷波传播的影响.模拟采用结合了交错Adams-Bashforth时间积分法、应力镜像法和多轴完美匹配层的标准交错网格高阶有限差分方案.通过模拟结果和理论结果对比,测试了方法的精度,验证了结果的正确性.在均匀半空间模型中,分别从波场快照、波形曲线及频散能量图三个角度,对黏弹性介质瑞雷波衰减和频散特性进行了详细分析.两层速度递增模型被用于进一步分析瑞雷波在黏弹性层状介质中的特性.结果表明：由于介质的黏弹性,瑞雷波振幅发生衰减,高频成分比低频成分衰减更剧烈,衰减程度随偏移距增大而增强;瑞雷波相速度发生频散,且随频率增大而增大,频散能量的分辨率有所降低;黏弹性波动方程中的参考频率,不会影响瑞雷波振幅衰减和相速度频散的程度,但决定了黏弹性和弹性介质瑞雷波相速度相等的频率位置.本研究有助于人们更好地理解地球介质中瑞雷波的行为,并为瑞雷波勘探的应用和研究提供了科学和有价值的参考. 相似文献
9.
Joint analysis of Rayleigh- and Love-wave dispersion is performed with the aim of evaluating how their joint use can improve retrieved vertical VS profiles. In fact, non-uniqueness of the solution and complex energy distribution among different modes represent problems which, if not properly considered, can eventually lead to ambiguous or erroneous subsurface models.Some tests performed on synthetic datasets show that for the deepest layers the improvements obtained by the joint inversion cannot be considered as fully decisive in terms of ultimate solution of non-uniqueness. Nevertheless joint analysis of dispersive properties of Rayleigh and Love waves reveals as a highly valuable tool able to clarify possible interpretation issues of the single components. Under some stratigraphical circumstances, velocity spectra of Rayleigh waves can in fact be extremely complex in terms of energy distribution among different modes and erroneous interpretations of dispersion curves can thus occur. Beneficial aspects of the joint analysis is shown in the light of possible inconsistencies of the Pareto front, since major interpretative errors can be revealed in the outcomes of the proposed inversion procedure. Two field datasets are analysed also suggesting some improvements in the field acquisition procedures aimed at the acquisition of both Rayleigh and Love waves. 相似文献
10.
Yinhe Luo Jianghai Xia Jiangping Liu Yixian Xu Qingsheng Liu 《Soil Dynamics and Earthquake Engineering》2009
The multichannel analysis of surface wave (MASW) method has been effectively used to determine near-surface shear- (S-) wave velocity. Estimating the S-wave velocity profile from Rayleigh-wave measurements is straightforward. A three-step process is required to obtain S-wave velocity profiles: acquisition of a multiple number of multichannel records along a linear survey line by use of the roll-along mode, extraction of dispersion curves of Rayleigh waves, and inversion of dispersion curves for an S-wave velocity profile for each shot gather. A pseudo-2D S-wave velocity section can be generated by aligning 1D S-wave velocity models. In this process, it is very important to understand where the inverted 1D S-wave velocity profile should be located: the midpoint of each spread (a middle-of-receiver-spread assumption) or somewhere between the source and the last receiver. In other words, the extracted dispersion curve is determined by the geophysical structure within the geophone spread or strongly affected by the source geophysical structure. In this paper, dispersion curves of synthetic datasets and a real-world example are calculated by fixing the receiver spread and changing the source location. Results demonstrate that the dispersion curves are mainly determined by structures within a receiver spread. 相似文献
11.
Shallow SH-wave reflections are far from routine, although their study can provide insights into important properties of near-surface materials that cannot be inferred from P-wave data alone. Difficulties in separating SH-wave reflections from Love waves are generally considered the major obstacle to progress in shallow SH-wave seismic reflection. This may be the case in surveys undertaken at great depths, but it is not necessarily true for reflection data gathered at shallow and ultra-shallow depths. This paper shows that when SH-wave data possess wavelengths greater than the thickness of the superficial layer, Love waves are not greatly dispersed. In this case, misinterpretation between parts of reflection hyperbolae and waveguide arrivals is sufficiently limited. In a one-layer model earth, which well approximates typical situations of the near-surface underground, the most energetic modes (the lowermost modes) of the dispersed surface waves have a dominant frequency band that falls below the wavelet spectrum of the shallow reflections; therefore, they can be filtered out in the frequency domain. Higher modes, although their spectral content overlaps that of the reflections, exhibit small amplitudes on seismograms and leave strong reflections unaffected.We present field examples from three different sites where we were able to obtain ultra-shallow reflections (< 3 m) in unconsolidated sediments. The high level of resolution (vertical resolution up to 15 cm) suggests that SH-wave reflection imaging has the potential to complement other high-resolution techniques, such as P-wave reflection and ground-penetrating radar (GPR) imaging, allowing a better and more complete characterization of the near-surface environments. 相似文献
12.
Crustal structure beneath Liaoning province and the Bohai Sea and its adjacent region in China based on ambient noise tomography 
下载免费PDF全文
下载免费PDF全文 The velocity structure of the crust beneath Liaoning province and the Bohai sea in China was imaged using ambient seismic noise recorded by 73 regional broadband stations. All available three-component time series from the 12-month span between January and December 2013 were cross-correlated to yield empirical Green's functions for Rayleigh and Love waves. Phasevelocity dispersion curves for the Rayleigh waves and the Love waves were measured by applying the frequencytime analysis method. Dispersion measurements of the Rayleigh wave and the Love wave were then utilized to construct 2D phase-velocity maps for the Rayleigh wave at8–35 s periods and the Love wave at 9–32 s periods,respectively. Both Rayleigh and Love phase-velocity maps show significant lateral variations that are correlated well with known geological features and tectonics units in the study region. Next, phase dispersion curves of the Rayleigh wave and the Love wave extracted from each cell of the 2D Rayleigh wave and Love wave phase-velocity maps,respectively, were inverted simultaneously to determine the3 D shear wave velocity structures. The horizontal shear wave velocity images clearly and intuitively exhibit that the earthquake swarms in the Haicheng region and theTangshan region are mainly clustered in the transition zone between the low-and high-velocity zones in the upper crust, coinciding with fault zones, and their distribution is very closely associated with these faults. The vertical shear wave velocity image reveals that the lower crust downward to the uppermost mantle is featured by distinctly high velocities, with even a high-velocity thinner layer existing at the bottom of the lower crust near Moho in central and northern the Bohai sea along the Tanlu fault, and these phenomena could be caused by the intrusion of mantle material, indicating the Tanlu fault could be just as the uprising channel of deep materials. 相似文献
13.
Digital seismograms from 25 earthquakes located in the southeastern part of Europe, recorded by three-component very broadband seismometers at the stations Vitosha (Bulgaria) and Muntele Rosu (Romania), were processed to obtain the dispersion properties of Rayleigh and Love surface waves. Rayleigh and Love group-velocity dispersion curves were obtained by frequency–time analysis (FTAN). The path-averaged shear-wave velocity models were computed from the obtained dispersion curves. The inversion of the dispersion curves was performed using an approach based on the Backus–Gilbert inversion method. Finally, 70 path-averaged velocity models (35 R-models computed from Rayleigh dispersion curves and 35 L-models computed from Love dispersion curves) were obtained for southeastern Europe. For most of the paths, the comparison between each pair of models (R-model and L-models for the same path) shows that for almost all layers the shear-wave velocities in the L-models are higher than in the R-models. The upper sedimentary layers are the only exception. The analysis of both models shows that the depth of the Moho boundary in the L-models is shallower than its depth in the R-models. The existence of an anisotropic layer associated with the Moho boundary at depths of 30–45 km may explain this phenomenon. The anisotropy coefficient was calculated as the relative velocity difference between both R- and L-models at the same depths. The value of this coefficient varies between 0% and 20%. Generally, the anisotropy of the medium caused by the polarization anisotropy is up to 10–12%, so the maximum observed discrepancies between both types of models are also due to the lateral heterogeneity of the shear-wave velocity structure of the crust and the upper mantle in the region. 相似文献
14.
15.
Rayleigh-wave phase velocities have been utilized to determine shear (S)-wave velocities in near-surface geophysics since early 1980s. One of the key steps is to calculate theoretical dispersion curves of an earth model. When the S-wave velocity of the surface layer is higher than some of the layers below, however, the Rayleigh-wave phase velocity in a high-frequency range calculated by existing algorithms approaches the lowest S-wave velocity among the layers above the half-space, rather than a value related to the S-wave velocity of the surface layer. According to our numerical modeling results based on wave equation, trends of the Rayleigh-wave dispersive energy approach about a 91% of the S-wave velocity of the surface layer at a high-frequency range when its wavelength is much shorter than the thickness of the surface layer, which cannot be fitted by a dispersion curve calculated by existing algorithms. We propose a method to calculate Rayleigh-wave phase velocities of models with a high-velocity surface layer by considering its penetration depth. We build a substituted model that only contains the layer with the lowest S-wave velocity among the layers above the half-space and the layers above it. We use the substituted model to replace the original model to calculate phase velocities when the Rayleigh-wave wavelength is not long enough to penetrate the lowest S-wave velocity layer. Several synthetic models are used to verify fitness between the dispersion curve calculated by our proposed method and the trend of the highest dispersive energy. Examples of inversion also demonstrate high accuracy of using our method as the forward calculation method during the inversions. 相似文献
16.
T. A. Mokhtar C. J. Ammon R. B. Herrmann H. A. A. Ghalib 《Pure and Applied Geophysics》2001,158(8):1425-1444
— The group-velocity distribution beneath the Arabian Plate is investigated using Love and Rayleigh waves. We obtained a balanced path coverage using seismograms generated by earthquakes located along the plate boundaries. We measured Love- and Rayleigh-wave group-velocity dispersion using multiple filter analysis and then performed a tomographic inversion using these observations to estimate lateral group velocity variations in the period range of 5–60?s. The Love- and Rayleigh-wave results are consistent and show that the average group velocity across Arabia increases with increasing period. The tomographic results also delineate first-order regional structure heterogeneity as well as the sharp transition between the Arabian shield and the Arabian platform. Systematic differences are observed in the distribution of the short-period group velocities across the two provinces, which are consistent with surface geology. The slower velocities in the platform reveal the imprint of its thick sedimentary section, while faster velocities correlate well with the exposed volcanic flows in the shield. Shear-wave velocity models for the two regions, obtained from the inversion of the group velocities, confirm results from previous studies of higher S-wave velocity in the upper crust beneath the shield. This may be due to the present remnants of the oceanic crust (ophiolite belts) associated with the island arcs evolutionary model of the Arabian shield.¶The mapping of the surface-wave group velocity using a large data can be used in constraining the regional structure at existing and planned broadband stations deployed in this tectonically complex region as part of the seismic monitoring under CTBT. 相似文献
17.
Jianghai Xia Yixian Xu Chao Chen Ronald D. Kaufmann Yinhe Luo 《Soil Dynamics and Earthquake Engineering》2006,26(5):395-403
We discuss five useful equations related to high-frequency surface-wave techniques and their implications in practice. These equations are theoretical results from published literature regarding source selection, data-acquisition parameters, resolution of a dispersion curve image in the frequency–velocity domain, and the cut-off frequency of high modes. The first equation suggests Rayleigh waves appear in the shortest offset when a source is located on the ground surface, which supports our observations that surface impact sources are the best source for surface-wave techniques. The second and third equations, based on the layered earth model, reveal a relationship between the optimal nearest offset in Rayleigh-wave data acquisition and seismic setting—the observed maximum and minimum phase velocities, and the maximum wavelength. Comparison among data acquired with different offsets at one test site confirms the better data were acquired with the suggested optimal nearest offset. The fourth equation illustrates that resolution of a dispersion curve image at a given frequency is directly proportional to the product of a length of a geophone array and the frequency. We used real-world data to verify the fourth equation. The last equation shows that the cut-off frequency of high modes of Love waves for a two-layer model is determined by shear-wave velocities and the thickness of the top layer. We applied this equation to Rayleigh waves and multi-layer models with the average velocity and obtained encouraging results. This equation not only endows with a criterion to distinguish high modes from numerical artifacts but also provides a straightforward means to resolve the depth to the half space of a layered earth model. 相似文献
18.
Rayleigh波勘探方法在探测近地表横波速度、动力学特征等环境与工程地球物理领域获得了广泛应用.这种方法以弹性层状介质理论为基础,然而实际介质具有黏弹性,研究面波在层状黏弹性介质中的传播特征,将为近地表面波勘探提供有益帮助.在某些弹性层状介质模型中,例如存在低速夹层和强波阻抗差异地层模型,Rayleigh波相邻两条频散曲线彼此会非常靠近,产生看似彼此"交叉"的现象,即"osculation"现象,但对于黏弹性介质中的这种现象并没有进行相关的研究.本文利用Muller法计算层状黏弹性介质Rayleigh波频散方程,基于层状介质模型中Rayleigh波频散和衰减曲线连续的性质,结合本征位移曲线特征,分析二层黏弹性介质模型中Rayleigh波频散曲线"交叉"现象以及"交叉"点附近的波动特性.结果表明:与弹性介质相比,黏弹性介质中Rayleigh波的波动特性存在明显差异,随着介质对地震波的损耗越来越强,将导致Rayleigh波频散曲线发生"交叉"现象. 相似文献
19.
《Journal of Applied Geophysics》2007,61(2):83-91
The seismic refraction method is commonly used to determine the lithology and stratigraphic geometry of geological sites. Beyond this application there is also the potential to extract additional velocity-related information such as mechanical properties of soils and rocks. However, this requires a reliable model of the subsurface velocity variations. Refraction data, P- and SH-wave first arrivals, and surface waves were analyzed using three different techniques: delay-time in combination with ray-tracing, tomography and multichannel analysis of surface waves (MASW). Results from the first two techniques were compared, which showed that sharp high-contrasting layering is best imaged by the traditional method, delay-time followed by ray-tracing. The tomographic method was unable to detect the water table in the P-wave survey but resolved near-surface gradational velocity changes. On the other hand, in the SH-wave survey the traditional method was not useful because of gradually increasing velocities, which were better suited to the tomographic method. Furthermore, to produce spatially detailed velocity-variation models the tomographic or the MASW methods are applicable. The MASW model showed somewhat lower velocities compared to the SH-refraction tomographic model and, in contrast, showed inverted velocity gradients. This study also presents a comparison between the shear moduli measured in situ, i.e. calculated from shear wave velocities, and determined using empirical relationships. The empirical relationship for sand gives higher values for shear moduli than those measured in situ. 相似文献
20.
采用与作者2014年发表的“大别-苏鲁及其邻近地区基于背景噪声的勒夫波群速度成像”文章相同的资料,用频时分析提取5 000余条瑞雷波和4 000余条勒夫波相速度频散曲线,反演得到了8—32 s的瑞雷波和勒夫波相速度分布图像．结果显示,瑞雷波与勒夫波相速度分布具有很好的一致性．8 s的相速度分布与地表构造特征相吻合,造山带与隆起区均表现为高速,盆地因其规模不同而显示不同程度的低速．随着周期的增大,大别 苏鲁的高速带由强变弱,但始终存在．16—24 s的高速可能主要受到中地壳高速的控制,而32 s的高速则可能与上地幔顶部的高速有关．比较大别造山带与苏鲁造山带的平均频散曲线,发现大别造山带和苏鲁造山带的勒夫波频散曲线均高于AK135模型计算的理论频散曲线,而瑞雷波则没有这一现象. 这可能意味着两个地区有比较强烈的径向各向异性． 相似文献