首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Non‐volcanic continental passive margins have traditionally been considered to be tectonically and magmatically inactive once continental breakup has occurred and seafloor spreading has commenced. We use ambient‐noise tomography to constrain Rayleigh‐wave phase‐velocity maps beneath the eastern Gulf of Aden (eastern Yemen and southern Oman). In the crust, we image low velocities beneath the Jiza‐Qamar (Yemen) and Ashawq‐Salalah (Oman) basins, likely caused by the presence of partial melt associated with magmatic plumbing systems beneath the rifted margin. Our results provide strong evidence that magma intrusion persists after breakup, modifying the composition and thermal structure of the continental margin. The coincidence between zones of crustal intrusion and steep gradients in lithospheric thinning, as well as with transform faults, suggests that magmatism post‐breakup may be driven by small‐scale convection and enhanced by edge‐driven flow at the juxtaposition of lithosphere of varying thickness and thermal age.  相似文献   

2.
A geophysical survey in the eastern Gulf of Aden, between the Alula–Fartak (52°E) and the Socotra (55°E) transform faults, was carried out during the Encens–Sheba cruise. The conjugate margins of the Gulf are steep, narrow and asymmetric. Asymmetry of the rifting process is highlighted by the conjugate margins (horst and graben in the north and deep basin in the south). Two transfer fault zones separate the margins into three segments, whereas the present‐day Sheba Ridge is divided into two segments by a transform discontinuity. Therefore segmentation of the Sheba Ridge and that of the conjugate margins did coincide during the early stages of oceanic spreading. Extensive magma production is evidenced in the central part of the western segment. Anomaly 5d was identified in the northern and southern parts of the oceanic basin, thus confirming that seafloor spreading in this part of Gulf of Aden started at least 17.6 Ma ago.  相似文献   

3.
With oblique rifting, both extension perpendicular to the rift trend and shear parallel to the rift trend contribute to rift formation. The relative amounts of extension and shear depend on α, the acute angle between the rift trend and the relative displacement direction between opposite sides of the rift. Analytical and experimental (clay) models of combined extension and left-lateral shear suggest the fault patterns produced by oblique rifting. If α is less than 30°, conjugate sets of steeply dipping strike-slip faults form in rifts. Sinistral and dextral strike-slip faults trend subparallel and at large angles to the rift trend, respectively. If α is about 30°, strike-slip, oblique-slip and/or normal faults form in rifts. Faults with sinistral and dextral strike slip trend subparallel and at large angles to the rift trend, respectively. Normal faults strike about 30° counterclockwise from the rift trend. If α exceeds 30°, normal faults form in rifts. They have moderate dips and generally strike obliquely to the rift trend and to the relative displacement direction between opposite sides of the rift. If α equals 90°, the normal faults strike parallel to the rift trend and perpendicularly to the displacement direction.The modeling results apply to the Gulf of California and Gulf of Aden, two Tertiary continental rift systems produced by combined extension and shear. Our results explain the presence and trends of oblique-slip and strike-slip faults along the margins of the Gulf of California and the oblique trend (relative to the rift trend) of many normal faults along the margins of both the Gulf of California and the Gulf of Aden.  相似文献   

4.
 侏罗纪时东南亚大陆上形成两个大盆地,西为海相盆地,东为陆相红盆。白垩纪时大盆地闭合或解体。第三纪出现裂谷盆地,其发育受燕山期构造格局控制;拉张应力自南向北变弱,裂谷发育自南向北变晚。第四纪为上叠盆地阶段。滇西与泰国各时期盆地的对比研究有助于更好地认识其演化特征,恢复东南亚大陆侏罗纪以来不断碎裂、局部解体的历史。  相似文献   

5.
吴根耀 《地质科学》1991,(4):359-368
侏罗纪时东南亚大陆上形成两个大盆地,西为海相盆地,东为陆相红盆。白垩纪时大盆地闭合或解体。第三纪出现裂谷盆地,其发育受燕山期构造格局控制;拉张应力自南向北变弱,裂谷发育自南向北变晚。第四纪为上叠盆地阶段。滇西与泰国各时期盆地的对比研究有助于更好地认识其演化特征,恢复东南亚大陆侏罗纪以来不断碎裂、局部解体的历史。  相似文献   

6.
V. E. Khain  L. E. Levin   《Tectonophysics》1980,70(3-4):237-246
Inner and marginal deep seas are of considerable interest not only for their genesis but also as “micromodels” of oceans. In the latter case it must be noted that some of them essentially differ from oceans in several parameters. They have a shorter period of development, thicker sedimentary cover, less distinct linear magnetic anomalies or an absence of them, high heat-flow values and seismic activity over their whole area. Consequently, the analogy with the oceans has certain limitations as the deep structure of such seas is not homogeneous and they probably vary in genesis.

Only a few marginal seas are cut off from the principal areas of the oceans by island arcs formed, most probably, along transform faults. The origin of this type is more or less reliably demonstrated for the Bering Sea. Other types of marginal seas are more numerous. Some of them (such as the Gulf of Aden and the Gulf of California) are embryonic apophyses connected with the oceans. Others are atrophied (the Tasman and the Labrador seas) small oceans. The group of marginal and inner seas which lie in the inside zone of mature or young island arcs is even more numerous. Only a few basins of this group resulted from linear spreading imprinted in the system of magnetic anomalies (the Shikoku-Parese-Vela basin), the rest are supposed to have been formed in the process of diffusal or polyaxial spreading of recent time as in Afar.

The majority of inner and marginal seas are younger than recent oceans. They are formed by rifting, oriented crosswise to continental margins of the Atlantic type or along the strike of margins of Andean type. More ancient basins of marginal and inner seas have been involved in Phanerozoic orogens or more rarely became parts of platforms (Ciscaspian syneclise).  相似文献   


7.
Freddy Corredor 《Tectonophysics》2003,372(3-4):147-166
Remote sensing and field studies of several extensional basins along the northern margin of the Gulf of Aden in Yemen show that Oligocene–Miocene syn-rift extension trends N20°E on average, in agreement with the E–W to N120°E strike of main rift-related normal faults, but oblique to the main trend of the Gulf (N70°E). These faults show a systematic reactivation under a 160°E extensional stress that we interpret also as syn-rift. The occurrence of these two successive phases of extension over more than 1000 km along the continental margin suggests a common origin linked to the rifting process. After discussing other possible mechanisms such as a change in plate motion, far-field effects of Arabia–Eurasia collision, and stress rotations in transfer zones, we present a working hypothesis that relates the 160°E extension to the westward propagation since about 20 Ma of the N70°E-trending, obliquely spreading, Gulf of Aden oceanic rift. The late 160°E extension, perpendicular to the direction of rift propagation, could result from crack-induced extension associated with the strain localization that characterises the rift-to-drift transition.  相似文献   

8.
The Wagner basin occupies the northernmost spreading centre in the Gulf of California, located along the Pacific‐North America plate boundary. It is filled with sediments from the Colorado River that obscure its bathymetric expression; therefore it is not as well defined as other basins in the central and southern Gulf of California. To define the geometry and extension of the Wagner basin, a 2D multi‐channel seismic reflection database was used. Data were collected by Petroleos Mexicanos (PEMEX) in 1979–1980. The most important regional structural features identified are the Consag and Wagner normal faults and the Cerro Prieto strike‐slip fault. These structures play an important role in the development of the basin. The Consag fault, described for the first time in this paper, marks the western side of the basin. The eastern and northwest limits are bound by the Cerro Prieto and Wagner faults respectively. The Wagner fault intersects the Cerro Prieto fault at an angle of 130°, bending the depocentre in a NW direction, adjacent to the Cerro Prieto fault zone. The northernmost segment of the Consag fault bends 25° in a NE direction and joins the Cerro Prieto fault at an angle of 110°. Greater subsidence (up to 300 m) takes place along the northern trace of the Cerro Prieto fault, with a downthrown displacement of 400 m. The Consag and Wagner breaks obliquely intersect the Cerro Prieto fault, and, inasmuch as both are normal faults, they have small horizontal slip components which generated oblique displacement. This structural pattern is different relative to the pattern of basins located south of Wagner basin, such as the Upper and Lower Delfin basins. The orientations of the normal faults are perpendicular to the master fault (Ballenas transform fault). The relationship between normal and transform faults in the Wagner basin and the observed ‘S’ shape are typical of a basin that has not yet reached maturity. As a result of this study, the previously uncertain area (～1330 km2) and perimeter (158 km) of the Wagner basin were defined.  相似文献   

9.
T. V. Gerya 《Petrology》2013,21(6):550-560
This work presents high-resolution 3D numerical model of transform fault initiation at rifted continental margins. Our petrological-thermomechanical visco-plastic model allows for spontaneous nucleation of oceanic spreading process in a continental rift zone and takes into account new oceanic crust growth driven by decompression melting of the asthenospheric mantle. Numerical model predicts that ridge-transform spreading pattern initiate in several subsequent stages: crustal rifting (0–1.5 Myr), spreading centers nucleation and propagation (1.5–3 Myr), proto-transform fault initiation and rotation (3–5 Myr) and mature ridge-transform spreading (> 5 Myr). Comparison of modeling results with the natural data from the Woodlark Basin suggests that the development of this region closely matches numerical predictions. Similarly to the model, the Moresby (proto-) Transform terminates in the oceanic rather than in the continental crust. This fault associates with a notable topographic depression and formed within 0.5–2 Myr while linking two offset overlapping spreading segments. Model reproduces well characteristic “rounded” contours of the spreading centers as well as the presence of a remnant of the broken continental crustal bridge observed in the Woodlark Basin. Proto-transform fault traces and truncated tip of one spreading center present in the model are also documented in nature. Numerical results are in good agreement with the concept of Taylor et al. (2009) which suggests that spreading segments nucleate en echelon in overlapping rift basins and that transform faults develop as or after spreading nucleates. Our experiments also allow to refine this concept in that (proto)-transform faults may also initiate as oblique rather than only spreading-parallel tectonic features. Subsequent rotation of these faults toward the extension-parallel direction is governed by space accommodation during continued oceanic crust growth within offset ridge-transform intersections.  相似文献   

10.
The Levant Rift system is an elongated series of structural basins that extends for more than 1000 km from the northern Red Sea to southern Anatolia. The system consists of three major segments, the Jordan Rift in the south, El Gharb–Kara-Su Rift in the north, and the Lebanese Fault splay in between. The rifted parts of this structural system are accompanied by intensively uplifted margins that mirror-image the basinal pattern, namely, the deeper the basin—the higher its margins, and vice versa. Uplifts also occur along the fault splay section. The Jordan Rift comprises axial basins that diminish in size from the south northwards, and are separated from each other by shallow threshold zones along the axis of the rift, where the margins are also subdued. The Lebanese Fault splay consists of five faults that emerge from the northern edge of the Jordan Rift and trend like a fan between the north and the northeast. One of these faults connects the Jordan and El Gharb–Kara-Su rifts. The Levant Rift and its uplifted margins started to develop in the middle-late Miocene, and most of the structural development occurred in the Plio-Pleistocene.The Levant Rift system is characterized by its oblique displacement, and evidence for both dip-slip and strike-slip displacement was measured on its faults. Earthquakes also indicate that same mixed pattern, some of them show strike-slip offset, and others normal. It is generally conceded that the amount of normal offset along the boundary faults of the Rift system reaches 8–10 km, but the lateral displacement is disputed, and offsets ranging from 11 to 107 km were suggested. Assessment of the available data led us to suggest that the sinistral offset along the Levant Rift system is approximately 10–20 km. The similarity between the vertical and the lateral displacements, the basin and threshold structural pattern of the Rift, model experiments in oblique rifting, as well as the significant tectonic resemblance to the Red Sea and the East African rifts, indicate that the Levant Rift is the product of continental breakup, and it is probably an emerging oceanic spreading center.  相似文献   

11.
This article outlines geomorphological and tectonic elements of the Afar Depression, and discusses its evolution. A combination of far-field stress, due to the convergence of the Eurasian and Arabian plates along the Zagros Orogenic Front, and uplift of the Afar Dome due to a rising mantle plume reinforced each other to break the lithosphere of the Arabian–Nubian Shield. Thermal anomalies beneath the Arabian–Nubian Shield in the range of 150 °C–200 °C, induced by a rising plume that mechanically and thermally eroded the base of the mantle lithosphere and generated pulses of prodigious flood basalt since ∼30 Ma. Subsequent to the stretching and thinning the Afar Dome subsided to form the Afar Depression. The fragmentation of the Arabian–Nubian Shield led to the separation of the Nubian, Arabian and Somalian Plates along the Gulf of Aden, the Red Sea and the Main Ethiopian Rift. The rotation of the intervening Danakil, East-Central, and Ali-Sabieh Blocks defined major structural trends in the Afar Depression. The Danakil Block severed from the Nubian plate at ∼20 Ma, rotated anti-clockwise, translated from lower latitude and successively moved north, left-laterally with respect to Nubia. The westward propagating Gulf of Aden rift breached the Danakil Block from the Ali-Sabieh Block at ∼2 Ma and proceeded along the Gulf of Tajura into the Afar Depression. The propagation and overlap of the Red Sea and the Gulf of Aden along the Manda Hararo–Gobaad and Asal–Manda Inakir rifts caused clockwise rotation of the East-Central Block. Faulting and rifting in the southern Red Sea, western Gulf of Aden and northern Main Ethiopian Rift superimposed on Afar. The Afar Depression initiated as diffused extension due to far-field stress and area increase over a dome elevated by a rising plume. With time, the lithospheric extension intensified, nucleated in weak zones, and developed into incipient spreading centers.  相似文献   

12.
This paper describes the updated stratigraphy, structural framework and evolution, and hydrocarbon prospectivity of the Paleozoic, Mesozoic and Cenozoic basins of Yemen, depicted also on regional stratigraphic charts. The Paleozoic basins include (1) the Rub’ Al-Khali basin (southern flanks), bounded to the south by the Hadramawt arch (oriented approximately W–E) towards which the Paleozoic and Mesozoic sediments pinch out; (2) the San’a basin, encompassing Paleozoic through Upper Jurassic sediments; and (3) the southern offshore Suqatra (island) basin filled with Permo-Triassic sediments correlatable with that of the Karoo rift in Africa. The Mesozoic rift basins formed due to the breakup of Gondwana and separation of India/Madagascar from Africa–Arabia during the Late Jurassic/Early Cretaceous. The five Mesozoic sedimentary rift basins reflect in their orientation an inheritance from deep-seated, reactivated NW–SE trending Infracambrian Najd fault system. These basins formed sequentially from west to east–southeast, sub-parallel with rift orientations—NNW–SSE for the Siham-Ad-Dali’ basin in the west, NW–SE for the Sab’atayn and Balhaf basins and WNW–ESE for the Say’un-Masilah basin in the centre, and almost E–W for the Jiza’–Qamar basin located in the east of Yemen. The Sab’atayn and Say’un–Masilah basins are the only ones producing oil and gas so far. Petroleum reservoirs in both basins have been charged from Upper Jurassic Madbi shale. The main reservoirs in the Sab’atayn basin include sandstone units in the Sab’atayn Formation (Tithonian), the turbiditic sandstones of the Lam Member (Tithonian) and the Proterozoic fractured basement (upthrown fault block), while the main reservoirs in the Say’un–Masilah basin are sandstones of the Qishn Clastics Member (Hauterivian/Barremian) and the Ghayl Member (Berriasian/Valanginian), and Proterozoic fractured basement. The Cenozoic rift basins are related to the separation of Arabia from Africa by the opening of the Red Sea to the west and the Gulf of Aden to the south of Yemen during the Oligocene-Recent. These basins are filled with up to 3,000 m of sediments showing both lateral and vertical facies changes. The Cenozoic rift basins along the Gulf of Aden include the Mukalla–Sayhut, the Hawrah–Ahwar and the Aden–Abyan basins (all trending ENE–WSW), and have both offshore and onshore sectors as extensional faulting and regional subsidence affected the southern margin of Yemen episodically. Seafloor spreading in the Gulf of Aden dates back to the Early Miocene. Many of the offshore wells drilled in the Mukalla–Sayhut basin have encountered oil shows in the Cretaceous through Neogene layers. Sub-commercial discovery was identified in Sharmah-1 well in the fractured Middle Eocene limestone of the Habshiyah Formation. The Tihamah basin along the NNW–SSE trending Red Sea commenced in Late Oligocene, with oceanic crust formation in the earliest Pliocene. The Late Miocene stratigraphy of the Red Sea offshore Yemen is dominated by salt deformation. Oil and gas seeps are found in the Tihamah basin including the As-Salif peninsula and the onshore Tihamah plain; and oil and gas shows encountered in several onshore and offshore wells indicate the presence of proven source rocks in this basin.  相似文献   

13.
Slickenside studies in regions of crustal spreading such as Iceland and the Afar Depression, East Africa, reveal that a significant number of faults parallel and close to rift axes are strike-slip rather than normal. Therefore, the pattern of brittle deformation in these regions does not conform to the classic two-dimensional schemes of oceanic tectonics and pre-oceanic rifting. Dip-slip and strike-slip faulting presumably alternated along or in the vicinity of spreading axes, indicate a varying stress field and a combination of transverse and longitudinal movements. In Iceland, strike-slip faults parallel to rifts are observed both west and east of the rift system as well as in a median area between overlapping rifts; the mechanisms proposed for their origin include accommodation of oblique convergence or divergence of crustal sections due to variations of spreading directions along axis and the interaction of overlapping rifts. In the Afar Depression this kind of fault is recorded west of the rift of Asal and can be imputed to reflect an interaction among rifts in the vicinity of the Afar triple junction. Rift-parallel strike-slip faults cannot however be assumed to be a feature of all crustal spreading axes due to the peculiarity of the examined regions: both of them are hot-spot areas and the Afar Depression lies at a triple junction.  相似文献   

14.
The Arabian Plate is important and unique in many ways. The worker wants to highlight the important features characterizing the Arabian Plate. It is a unique fit of the earth's surface jig saw puzzle, different than all other lithospheric plates. It has the three known main tectonic plate boundaries, divergent, convergent and conservative ones. These boundaries are the Red Sea and Gulf of Aden, Zagros-Taurus and Dead Sea, respectively. It has three main well-defined and sharp plate boundaries, and it is surrounded by three major plates, African, Eurasian and Indian plates. The Red Sea and Gulf of Aden form the divergent boundary and spreading center. The Dead Sea Transform Fault (the Gulf of Aqaba Transform Fault) represents the conservative boundary and transform fault system. The Zagros-Taurus Thrust (Zagros-Taurus-Bitlis Thrust and Fold Belt) represents the convergent boundary and collision zone. The Arabian Plate incorporates a wide range and variety and subvariety of all three rock types, igneous, metamorphic and sedimentary rocks, this in addition to all kinds of structures. Among these are folding with major fold belts, faulting, foliation, lineation and diapirism. Transform, transcurrent, normal, graben, reverse, thrust faults are all represented one way or another. The tectonics of the Arabian shield, which forms a major part of the Arabian Plate, has long tectonic history prior to the formation of the Red Sea. After the opening and formation of the latter, the tectonics of the Arabian shield became affected and controlled by its tectonics. The Arabian Plate includes the Arabian Platform which has a relatively different setting of tectonics represented by the Central Arabian Graben. The Arabian Plate contains one of the best representative outcropped ophiolite sequences in the world. The Arabian Plate most importantly incorporates most of world oil reserve. Seismic and volcanic activities are also manifested and affected many areas in the Arabian Plate.  相似文献   

15.
During the Late Mesozoic and Cenozoic, extension was widespread in Eastern China and adjacent areas. The first rifting stage spanned in the Late Jurassic–Early Cretaceous times and covered an area of more than 2 million km2 of NE Asia from the Lake Baikal to the Sikhot-Alin in EW direction and from the Mongol–Okhotsk fold belt to North China in NS direction. This rifting was characterized by intracontinental rifts, volcanic eruptions and transform extension along large-scale strike–slip faults. Based on the magmatic activity, filling sequence of basins, tectonic framework and subsidence analysis of basins, the evolution of this area can be divided into three main developmental phases. The first phase, calc-alkaline volcanics erupted intensely along NNE-trending faults, forming Daxing'anling volcanic belt, NE China. The second phase, Basin and Range type fault basin system bearing coal and oil developed in NE Asia. During the third phase, which was marked by the change from synrifting to thermal subsidence, very thick postrift deposits developed in the Songliao basin (the largest oil basin in NE China).Following uplift and denudation, caused by compressional tectonism in the near end of Cretaceous, a Paleogene rifting stage produced widespread continental rift systems and continental margin basins in Eastern China. These rifted basins were usually filled with several kilometers of alluvial and lacustrine deposits and contain a large amount of fossil fuel resources. Integrated research in most of these rifting basins has shown that the basins are characterized by rapid subsidence, relative high paleo-geothermal history and thinned crust. It is now accepted that the formation of most of these basins was related to a lithospheric extensional regime or dextral transtensional regime. During Neogene time, early Tertiary basins in Eastern China entered a postrifting phase, forming regional downwarping. Basin fills formed in a thermal subsidence period onlapped the fault basin margins and were deposited in a broad downwarped lacustrine depression. At the same time, within plate rifting of the Lake Baikal and Shanxi graben climaxed and spreading of the Japan Sea and South China Sea occurred. Quaternary rifting was marked by basalt eruption and accelerated subsidence in the area of Tertiary rifting. The Okinawa Trough is an active rift involving back-arc extension.Continental rifting and marginal sea opening were clearly developed in various kind of tectonic settings. Three rifting styles, intracontinental rifting within fold belt, intracontinental rifting within craton and continental marginal rifting and spreading, are distinguished on the basis of nature of the basin basement, tectonic location of rifting and relations to large strike–slip faults.Changes of convergence rates of India–Eurasia and Pacific–Eurasia may have caused NW–SE-trending extensional stress field dominating the rifting. Asthenospheric upwelling may have well assisted the rifting process. In this paper, a combination model of interactions between plates and deep process of lithosphere has been proposed to explain the rifting process in East China and adjacent areas.The research on the Late Mesozoic and Cenozoic extensional tectonics of East China and adjacent areas is important because of its utility as an indicator of the dynamic setting and deformational mechanisms involved in stretching Lithosphere. The research also benefits the exploration and development of mineral and energy resources in this area.  相似文献   

16.
太原盆地构造格局及其与地震活动水平的新认识   总被引：3，自引：0，他引：3  
太原盆地存在两组断裂，一组为横向断裂，即北东东－东西向断裂，是燕山期或晚古生代的断裂，其中有些断裂在上新世初仍有活动，但活动的幅度和规模均较小；另一组为纵向断裂，即北北东－北北西向断裂，为上新－第四纪断裂，活动较强，但规模不大，太原盆地的中小地震可能与之有关。  相似文献   

17.
The Afro-Arabian dome includes the elevated continental regions enclosing the Red Sea, Gulf of Aden, and the Ethiopian rift system, and extends northwards as far as Jordan. It is more than an order of magnitude larger than other African uplifts. Both the structures and the igneous rocks of the dome appear to be products of the superimposition of two, perhaps three, semi-independent generating systems, initiated at different times but all still active. A strain pattern dominated by NW-trending basins and rifts first became established early in the Cretaceous. By the end of the Oligocene, much of the extensional strain had been taken up along the Red Sea and Gulf of Aden axes, which subsequently developed into an ocean. Palaeogene “trap” volcanism of mildly alkaline to transitional character was related to this horizontal extension rather than to doming. Further west, the East Sahara swell has a history of intermittent alkaline volcanicity which began in the Mesozoic and was independent of magmatism in the Afro-Arabian dome. Volcanicity specifically related to doming began in the Miocene along a N-S zone of uplift extending from Ethiopia to Syria. This elongated swell forms the northern termination of the East African system of domes and rifts, characterized by episodic vertical uplift but very little extension. Superimposition of epeirogenic uplift upon structures formed by horizontal extension took place in the Neogene. Volcanicity related to vertical tectonics is mildly alkaline in character, whereas transitional and tholeiitic magmas are found along the spreading axes.  相似文献   

18.
J.D. Fairhead 《Tectonophysics》1973,20(1-4):261-267
Seismic refraction profiles now number 9 in the Gulf of Aden and 15 in the Red Sea with a further intensive study by the Cambridge University group between latitudes 22 and 23°N. The results of these surveys indicate that the main trough of the Gulf of Aden is underlain by oceanic crust while only the deep axial zone and a questionable amount of the main trough of the Red Sea are underlain by oceanic crust.

Seismic reflexion profiles reveal the nature of Layer 1 and the upper surface of Layer 2. A strong subbottom reflector is found beneath the main trough of the Red Sea at 0.5 km but is found to be absent in the axial zone. This survey together with the refraction work and geological evidence suggests a complex history for the main trough of the Red Sea. Reflexion profiles and dredging in the Gulf of Aden indicate that the thickness of sediments increases away from the central rough zone and that the sediment is underlain by volcanic material.  相似文献   


19.
We use structural and seismostratigraphic interpretation of multichannel seismic reflection data to understand the structure and kinematic history of the central Gulf of California. Our analysis reveals that oblique strain in the central Gulf formed two tectono–sedimentary domains during distinct deformation stages. The eastern domain, offshore Sonora, is bounded by the East and West Pedro Nolasco faults that may constitute the southernmost segments of the Tiburón Fault System. Within this domain, the dip-slip Yaqui Fault controlled deposition of 3.9 km of sediments in the half-graben Yaqui Basin. The western domain, offshore Baja California, is bounded by the Guaymas Transform Fault, which controlled the accumulation of 1.45 km of sediments within a half-graben that formed the early Guaymas Basin. The tectono–sedimentary activity offshore Sonoran likely ranges from Late Miocene–Pliocene to Late Pliocene time, while activity in the Guaymas Basin commenced in Late Pliocene time. Extinction of the main faults offshore Sonora was nearly coeval to the initiation of the Guaymas Transform Fault. Our results suggest that oblique strain has been accommodated by strain partition since the onset of rifting in the central Gulf. The Guaymas Basin is now a nascent spreading center, but prior to this, it evolved as a half-graben controlled by the Guaymas Transform Fault; such drastic transition is not constrained, but likely occurred during the Pleistocene time and must be localized < 30 km north of the axial troughs. The faults within the central Gulf transpose the Miocene N–S oriented grabens of Basin and Range style preserved onshore in the conjugate rifted margins.  相似文献   

20.
The Gondwanaland assembly rifted dominantly during Late Carboniferous–Early Permian forming several intracratonic rift basins. These rifts were subsequently filled with a thick sequence of continental clastic sediments with minor marine intercalations in early phase. In western part of India, these sediments are recorded in enclaves of Bikaner–Nagaur and Jaisalmer basins in Rajasthan. Facies correlatives of these sediments are observed in a number of basins that were earlier thought to be associated with the western part of India. The present work is a GIS based approach to reconnect those basins to their position during rifting and reconstruct the tectono-sedimentary environment at that time range. The study indicates a rift system spanning from Arabian plate in the north and extending to southern part of Africa that passes through Indus basin, western part of India and Madagascar, and existed from Late Carboniferous to Early Jurassic. Extensions related to the opening of Neo-Tethys led to the formation of a number of cross trends in the rift systems that acted as barriers to marine transgressions from the north as well as disrupted the earlier continuous longitudinal drainage systems. The axis of this rift system is envisaged to pass through present day offshore Kutch and Saurashtra and implies a thick deposit of Late Carboniferous to Early Jurassic sediments in these areas. Based on analogy with other basins associated with this rift system, these sediments may be targeted for hydrocarbon exploration.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号