首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
Lidar and photogrammetry have both been evaluated for detecting shortterm coastal change using the Black Ven mudslide, Dorset as a case study. A lidar-generated digital elevation model (DEM) was obtained and initially compared with a DEM generated using available 1:7500 scale aerial photography and automated digital photogrammetry. The quality of these two data sets was assessed using a third DEM, derived using a total station and conventional ground survey methods. The vertical accuracies (rms error) of the lidar and photogrammetry were 0.26m and 0.43m respectively, although both data sets displayed a tendency to generate heights slightly lower than the elevation of the terrain surface. The quality of the two data sets was then assessed with respect to local slope angle. The accuracy of photogrammetrically derived elevations varied with slope and more so than in the case of lidar
From these basic tests, lidar has proved to be more accurate than photogrammetry for soft-cliff. monitoring. Further research is required to establish whether this trend is applicable to other data sets and specifically for photogrammetric data acquired using larger scale imagery  相似文献   

2.
For areas of the world that do not have access to lidar, fine-scale digital elevation models (DEMs) can be photogrammetrically created using globally available high-spatial resolution stereo satellite imagery. The resultant DEM is best termed a digital surface model (DSM) because it includes heights of surface features. In densely vegetated conditions, this inclusion can limit its usefulness in applications requiring a bare-earth DEM. This study explores the use of techniques designed for filtering lidar point clouds to mitigate the elevation artifacts caused by above ground features, within the context of a case study of Prince William Forest Park, Virginia, USA. The influences of land cover and leaf-on vs. leaf-off conditions are investigated, and the accuracy of the raw photogrammetric DSM extracted from leaf-on imagery was between that of a lidar bare-earth DEM and the Shuttle Radar Topography Mission DEM. Although the filtered leaf-on photogrammetric DEM retains some artifacts of the vegetation canopy and may not be useful for some applications, filtering procedures significantly improved the accuracy of the modeled terrain. The accuracy of the DSM extracted in leaf-off conditions was comparable in most areas to the lidar bare-earth DEM and filtering procedures resulted in accuracy comparable of that to the lidar DEM.  相似文献   

3.
航测影像分辨率高、现势性强,采用航测影像进行送电线路平断面图的绘制是减少外业工作量,提高生产效率的主要手段。本文分析了航测平断面图高程误差产生的原因,提出了利用GPS RTK外业采集高程数据,提高航测平断面图高程拟合精度的方法。  相似文献   

4.
Generating maps of small areas using conventional aerial photography is of great interest for small engineering firms. The main problem is the high cost of the sophisticated digital photogrammetric workstations usually employed. In this paper, a low-cost close range photogrammetric software package is used to measure the three-dimensional coordinates of points on the land surface from a photogrammetric flight at a scale of approximately 1:5000. Furthermore, the influence of the type of scanner used to digitise photographs (consumer-grade or photogrammetric scanner), the resolution of the digital images and the number of control points required are examined. The root mean square errors obtained at the check points, using a low-cost close range software package, scanning aerial images with a photogrammetric scanner and 24 ground control points, were around 116 mm for X and Y coordinates, and 191 mm for Z. These levels of accuracy allow the generation of planimetric maps at a scale of 1:1500 and topographic maps with a contour interval of around 1 m. When the images were scanned with a consumer-grade scanner, the root mean square errors were around 150 mm for X and Y, and 271 mm for Z.  相似文献   

5.
In light of climate and land use change, stakeholders around the world are interested in assessing historic and likely future flood dynamics and flood extents for decision-making in watersheds with dams as well as limited availability of stream gages and costly technical resources. This research evaluates an assessment and communication approach of combining GIS, hydraulic modeling based on latest remote sensing and topographic imagery by comparing the results to an actual flood event and available stream gages. On August 28th 2011, floods caused by Hurricane Irene swept through a large rural area in New York State, leaving thousands of people homeless, devastating towns and cities. Damage was widespread though the estimated and actual floods inundation and associated return period were still unclear since the flooding was artificially increased by flood water release due to fear of a dam break. This research uses the stream section right below the dam between two stream gages North Blenheim and Breakabeen along Schoharie Creek as a case study site to validate the approach. The data fusion approach uses a GIS, commonly available data sources, the hydraulic model HEC-RAS as well as airborne LiDAR data that were collected two days after the flood event (Aug 30, 2011). The aerial imagery of the airborne survey depicts a low flow event as well as the evidence of the record flood such as debris and other signs of damage to validate the hydrologic simulation results with the available stream gauges. Model results were also compared to the official Federal Emergency Management Agency (FEMA) flood scenarios to determine the actual flood return period of the event. The dynamic of the flood levels was then used to visualize the flood and the actual loss of the Old Blenheim Bridge using Google Sketchup. Integration of multi-source data, cross-validation and visualization provides new ways to utilize pre- and post-event remote sensing imagery and hydrologic models to better understand and communicate the complex spatial-temporal dynamics, return periods and potential/actual consequences to decision-makers and the local population.  相似文献   

6.
POS辅助航空摄影测量精度分析   总被引:3,自引:1,他引:2  
刘力荣  左建章  关艳玲 《测绘科学》2012,(4):197-198,201
通过陕西勉县测区的POS辅助航空摄影测量试验,本文对SWDC-4搭载POS/AV 510 V5系统获取的航测数据使用直接定向法和POS辅助空中三角测量2种方法进行1∶10 000成图精度验证。结果证明:国产SWDC-4航摄仪与POS/AV系统集成进行POS辅助空三的加密成果能满足该测区1∶10 000地形图测图的平面和高程精度要求,直接定向也是可行的。  相似文献   

7.
The Metric Camera workshop was held to discuss results obtained from experiences carried out by principal investigations in the Metric Camera Project. The papers divided into three groups: photogrammetric investigations, interpretation and general. The photogrammetric investigations covered tests of accuracy. Plotting, aerial triangulation and the production of digital elevation modles and orthophotographs. There was general agreement that planimetric accuracies of between 20 m and 30 m and height accuracies of about 30 m could be achieved The emphasis within the group of papers on interpretation was on geology and the maping of cultural features. Results of this work are summarised and discussed in this paper.  相似文献   

8.
倾斜摄影测量技术在大比例尺地形图测绘中的应用   总被引:5,自引:0,他引:5  
作为国际测绘领域近些年新兴的高新技术,倾斜摄影测量技术已应用于城市快速三维建模中。由于目前常用的大比例尺地形图测绘方法不能同时满足快速成图的时间和成本要求,本文提出了一种利用倾斜摄影测量技术测绘大比例尺地形图方法,充分发挥无人机倾斜摄影测量技术灵活、成本低、高效的优点,倾斜影像可自动生成三维模型和点云,简化了后续绘图工作。评定试验得到的岢岚县大比例尺地形图可知,成果平面精度达到0.140 m,高程精度达到0.150 m,符合大比例尺地形图精度要求,适合快速测绘小区域大比例尺地形图。  相似文献   

9.
全数字摄影测量主要应用于生产数字地形图及数字地面高程模型(DEM)和数字正射影像图(DOM)。某市及周边地区1:l000地形图航测项目,利用DMC一110摄影仪进行摄影获取的影像数据,使用VirtuoZo数字摄影测量工作站,阐述进行航测内业绘制地形图的全面流程。DMC技术将发挥更大的优势,在数字摄影测量中得到越来越广泛的应用。  相似文献   

10.
利用小型低空航摄平台和非量测小相幅相机,搭载动态GNSS/INS组合系统进行空三加密,研究无人机搭载GNSS/INS辅助在不同分辨率、不同基线数量条件下的像控点布设以及空三加密,并对其平面精度、高程精度进行分析,以实现利用少量地面控制点进行大比例尺地形图测图。  相似文献   

11.
This study describes a method to map shoreline indicators on a sandy beach. The hypothesis is that, on this beach, spectral albedo is predominantly determined by moisture content and water lines can, therefore, be detected as albedo contrasts. A laboratory experiment is performed to relate moisture content to image albedo, and supervised edge detection is subsequently used to map the shoreline indicators with remote sensing imagery. The algorithm is tested with data from visible, near-infrared and shortwave-infrared wavelength regions. These results are compared to shoreline indicators obtained by a field survey and a shoreline indicator derived from a digital elevation model. Both the water line present when the imagery was acquired, as well as the maximum extent of the last flood, can be detected as a single edge. Older high water lines are confused with the last high water line and appear dispersed, as there are multiple debris lines present on the beach. The low water line, usually in saturated sand, also appears dispersed due to the presence of channels and troughs. Shorelines are constant moving boundaries, which is why shoreline indicators are used as a proxy. Unlike a mathematical indicator that is based on an elevation model, our method is more sensitive to the dynamic nature of shorelines. Supervised edge-detection is a technique for generating reproducible measurements of shoreline indicator positions over time, and aids in the monitoring of coastline migration.  相似文献   

12.
介绍了A3航空摄影测量系统的构成、成像方式及原理,并将其与常规航空摄影测量系统进行多方面比较分析。具体的工程实验表明,A3在航空影像获取、数据处理,生产高质量、高精度的数据产品等方面具有显著的优势,对后续的工程应用与研究具有一定的借鉴意义。  相似文献   

13.
本文采用APOLLO影像模拟生成的嫦娥一号三线阵CCD影像及其卫星的轨道与姿态模拟参数,按等效框幅像片(EFP)法和自由外方位元素(FEO)法分别计算摄影测量坐标系内的外方位元素及模型点坐标,生成了数字高程模型(DEM)、等高线、正射影像及三维地形仿真影像,评估了从模拟月球三线阵CCD影像生成的摄影测量成果的预期精度。  相似文献   

14.
利用航摄像片测制地形图,地物地貌要素的表示必须通过像片调绘来解决,因而像片调绘在整个航测生产过程中具有非常重要的地位和作用,要多出图出好图,必须努力提高像片调绘的工作质量。  相似文献   

15.
在不能实施基础航空摄影的新疆边境地带,利用高分辨率遥感卫星影像来弥补无航空摄影资料区域对1∶10000地形图的需求。本文简要介绍利用IKONOS立体卫星影像,在平地、丘陵地及山地测制1∶10000比例尺地形图的技术方案,并对不同数量控制点进行定向精度分析。  相似文献   

16.
在不能实施基础航空摄影的新疆边境地带,利用高分辨率遥感卫星影像来弥补无航空摄影资料区域对1∶10000地形图的需求。本文简要介绍利用IKONOS立体卫星影像,在平地、丘陵地及山地测制1∶10000比例尺地形图的技术方案,并对不同数量控制点进行定向精度分析。  相似文献   

17.
This paper describes the operational issues and basic technical requirements of modern aerial photogrammetry. The accuracy of photogrammetric point determination and the y-parallax at corresponding model points is analyzed when stereo models are reconstituted by using the exterior orientation elements of aerial images. Real aerial photographs, at image scales from 1:2 500 to 1:6 0000, with DGPS/IMU data taken from various topographies in China were processed by our POS-supported bundle block adjustment program WuCAPS. The empirical results verified that the accuracy of the exterior orientation elements from bundle block adjustment meets the requirements of the specifications of topographic mapping. However, the accuracy of the exterior orientation elements determined by POS fails to meet the requirements of the specifications of topographic mapping.  相似文献   

18.
In this letter, we present an approach to detecting trees in registered aerial image and range data obtained via lidar. The motivation for this problem comes from automated 3-D city modeling, in which such data are used to generate the models. Representing the trees in these models is problematic because the data are usually too sparsely sampled in tree regions to create an accurate 3-D model of the trees. Furthermore, including the tree data points interferes with the polygonization step of the building roof top models. Therefore, it is advantageous to detect and remove points that represent trees in both lidar and aerial imagery. In this letter, we propose a two-step method for tree detection consisting of segmentation followed by classification. The segmentation is done using a simple region-growing algorithm using weighted features from aerial image and lidar, such as height, texture map, height variation, and normal vector estimates. The weights for the features are determined using a learning method on random walks. The classification is done using the weighted support vector machines, allowing us to control the misclassification rate. The overall problem is formulated as a binary detection problem, and the results presented as receiver operating characteristic curves are shown to validate our approach  相似文献   

19.
Since several space-borne synthetic aperture radar (SAR) instruments providing high spatial resolutions and multi-polarisation capabilities will be mounted on satellites to be launched from 2006 onwards, radar imagery promises to become an indispensable asset for many environmental monitoring applications. Due to its all weather, day and night capabilities, SAR imagery presents obvious advantages over optical instruments, especially in flood management applications. To date, however, the coarse spatial resolution of available SAR datasets restricts the information that can be reliably extracted and processing techniques tend to be limited to binary floodplain segmentation into ‘flooded’ and ‘non flooded’ areas. It is the purpose of this paper to further improve the exploitation of SAR images in hydraulic modelling and near real-time crisis management by means of developing image processing methodologies that allow for the extraction of water levels at any point of the floodplain. As high-precision digital elevation models (DEM) produced, for instance, from airborne laser scanning become more readily available, methods can be exploited that combine SAR-derived flood extent maps and precise topographic data for retrieving water depth maps. In a case study of a well-documented flood event in January 2003 on the River Alzette, Grand Duchy of Luxembourg, a root mean squared error (R.M.S.E.) of 41 cm was obtained by comparing the SAR-derived water heights with surveyed high water marks that were collected during image acquisition. Water levels that were computed by a previously calibrated hydraulic model also suggest that the water surface profiles provided by the combined use of topographic data and SAR accurately reflect the true water line. The extraction of flooded areas within vegetated areas further demonstrates the usefulness of the proposed methodology.  相似文献   

20.
介绍了全数字摄影测量工作站、数码调绘以及HBCORS动态RTK在大比例尺地形图测量中的应用对航测工艺产生的影响,分析了传统的和新的航测工艺的优缺点;探讨如何面对新的航测生产工艺,提高地形图生产效率。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号