首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Gravity studies of the Rockall and Exmouth Plateaux using SEASAT altimetry   总被引：1，自引：0，他引：1  
Abstract SEASAT altimetric measurements are used to determine the gravity anomalies across two passive continental margins: the western margin of the Rockall Plateau, UK, and the Exmouth Plateau off north-west Australia. The small gravity anomalies observed over the starved western margin of the Rockall Plateau require the existence of a major density contrast within the crust, as well as the Moho, and show that the elastic thickness is less than 5 km at the time of rifting. The gravity anomaly over the Exmouth Plateau is compared with the gravity anomaly calculated from the sediment loading of a thin elastic plate, taking account of the variation in crustal thickness. This comparison shows that the Exmouth Plateau also has a small effective elastic thickness of 5 km, even for loads emplaced between 60 and 120 Myr after rifting. Elastic thicknesses of about 5 km have also been reported for other sedimentary basins, and are to be expected if the rheological properties of the crust and mantle depend on the ratio of the present temperature to the melting temperature. Flexural effects are therefore likely to be of minor importance in sedimentary basins.  相似文献   

2.
Summary. This paper concerns the calculation and analysis of admittance functions from large and uniform data sets of gravity and topography in four regions of the northern and western Pacific Ocean. The purpose is to separate and describe possible differences in isostatic compensation between several 'type' regions of oceanic crust: a mid-ocean ridge (Juan de Fuca), a mid-plate seamount chain (Hawaiian Ridge), fracture zone topography on old crust (north of Hawaii) and a marginal basin (Philippine Sea). Results suggest that there are significant differences in the degree to which long wavelength topography has been compensated which can be distinguished between regions. These differences are set in the perspective of three simple compensation mechanisms. Two of these consider local Airy models in which raised topography is compensated at depth either by crustal roots or low density mantle. A third considers the effects of an elastic plate of variable thickness supporting crustal variations. Conclusions are that: (a) a thick plate possibly in excess of 30 km supports the Hawaiian Ridge; (b) a much thinner plate of 5 to 15 km existed when the fracture zone topography was formed; (c) the Juan de Fuca Ridge is compensated either regionally by a plate 5 to 10 km thick or locally by sub-crustal low densities at depths of 15 to 20 km; and (d) the Philippine Sea shows no evidence for regional support: ridges are compensated locally by differences in crustal thickness whereas the basins are underlain by density variations at depths comparable to those of the much younger Juan de Fuca Ridge. The major difference between admittance functions for the Philippine Sea and comparably aged regions of the north Pacific Ocean adds further new evidence of possible evolutionary differences between it and normal ocean basins.  相似文献   

3.
Summary. Spectral analysis of eight marine gravity profiles and seven SEASAT profiles, combined with corresponding bathymetric data over the Northern Bay of Biscay origin, yield identical admittance functions for wavelengths greater than 120 km. the resulting admittance function has been interpreted in terms of an Airy model of compensation for wavelengths greater than 250 km and in terms of an elastic plate model of compensation for shorter wavelengths. the Airy model corresponds to a crustal thickness variation across the margin. the plate model with an elastic thickness of 8 km is associated with the regional compensation of a sedimentary load which was probably emplaced during and just after rifting.  相似文献   

4.
We develop a method for spatio-spectral localization of harmonic data on a sphere and use it to interpret recent high-resolution global estimates of the gravity and topography of Venus in the context of geodynamical models. Our approach applies equally to the simple spatial windowing of harmonic data and to variable-length-scale analyses, which are analogous to a wavelet transform in the Cartesian domain. Using the variable-length-scale approach, we calculate the localized RMS amplitudes of gravity and topography, as well as the spectral admittance between the two fields, as functions of position and wavelength. The observed admittances over 10 per cent of the surface of Venus (highland plateaus and tessera regions) are consistent with isostatic compensation of topography by variations in crustal thickness, while admittances over the remaining 90 per cent of the surface (rises, plains and lowlands) indicate that long-wavelength topography is dominantly the result of vertical convective tractions at the base of the lithosphere. The global average crustal thickness is less than 30 km, but can reach values as large as 40 km beneath tesserae and highland plateaus. We also note that an Earth-like radial viscosity structure cannot be rejected by the gravity and topography data and that, without a mechanical model of the lithosphere, admittance values cannot constrain the thickness of the thermal boundary layer of Venus. Modelling the lithosphere as a thin elastic plate indicates that at the time of formation of relief in highland plateaus and tesserae, the effective elastic plate thickness, Te , was less than 20 km. Estimates of Te at highland rises are consistently less than 30 km. Our inability to find regions with Te > 30 km is inconsistent with predictions made by a class of catastrophic resurfacing models.  相似文献   

5.
We study the tectonic setting and lithospheric structure of the greater Barents Sea region by investigating its isostatic state and its gravity field. 3-D forward density modelling utilizing available information from seismic data and boreholes shows an apparent shift between the level of observed and modelled gravity anomalies. This difference cannot be solely explained by changes in crustal density. Furthermore, isostatic calculations show that the present crustal thickness of 35–37 km in the Eastern Barents Sea is greater than required to isostatically balance the deep basins of the area (>19 km). To isostatically compensate the missing masses from the thick crust and deep basins and to adequately explain the gravity field, high-density material (3300–3350 kg m−3) in the lithospheric mantle below the Eastern Barents Sea is needed. The distribution of mantle densities shows a regional division between the Western and Eastern Barents and Kara Seas. In addition, a band of high-densities is observed in the lower crust along the transition zone from the Eastern to Western Barents Sea. The distribution of high-density material in the crust and mantle suggests a connection to the Neoproterozoic Timanide orogen and argues against the presence of a Caledonian suture in the Eastern Barents Sea. Furthermore, the results indicate that the basins of the Western Barents Sea are mainly affected by rifting, while the Eastern Barents Sea basins are located on a stable continental platform.  相似文献   

6.
Gravity anomalies and flexure of the lithosphere at Ascension Island   总被引：1，自引：0，他引：1  
Ascension Island, in the northern South Atlantic, forms the summit of a volcanic edifice 60 km in diameter which places a substantial load on the underlying young oceanic lithosphere. An analysis of a combined data set of recent and historical surface-gravity and bathymetry measurements on and around the island suggests that the lithosphere responds to this load by flexure equivalent to that of an elastic plate only ≈ 3 km thick, and that the mean density of the volcanic edifice is ≈ 2500 kg m-3. A steep gravity gradient across the island cannot be explained by a simple flexural model and must be attributed to lateral density variations within the volcano itself. The effective elastic thickness is considerably less than the expected ≈ 12 km mechanical thickness of the ≈ 6 Ma lithosphere loaded by the volcano, and less even than zero-age elastic thicknesses commonly observed at slow-spreading ridges with axial rift valleys. The unusually small elastic thickness may be attributed to the combined effects of the high curvature beneath the island, which produces bending stresses that are limited by the yield stress envelope, localized heating of the lithosphere during emplacement of the island, and crustal thickening. When these factors are taken into account, the observed flexure is consistent with rheological models based on experimental rock mechanics.  相似文献   

7.
b
As a supplement to seismic profiling surveys, crustal thicknesses have been estimated for 11 Fennoscandian seismograph stations equipped with three-component long period instruments, using the so-called spectral ratio technique of Phinney. The largest Moho depths, of the order of 45 km, were found for stations located in the north-east areas of Norway and Sweden and in Finland, with a local maximum in the Bothnian Bay. The coastal area of south-east Norway and Zealand, Denmark exhibit crustal thicknesses in the range 28–33 km. The agreement between our results and those obtained by conventional refraction profiling is good, when this comparison is restricted to profiles of lengths 300 km or more, and when the associated crustal thickness estimate is averaged over the central parts of the profiles in question. Also, a comparison between our results and other available geophysical information gives that the oldest tectonic provinces of the Baltic Shield also are characterized by relatively modest heat flow, and exhibit the greatest crustal thicknesses. Post-glacial uplift data and large wavelength free air gravity data appear to be uncorrelated with crustal thickness. The same partly applies to Bouguer gravity anomalies, thus implying that the isostatic compensation mechanism in Fennoscandia is of both Airy and Pratt type.  相似文献   

8.
A two-layer lithospheric stretching model that includes the effects of decompression melting was used to estimate the deformation and thermal evolution of the Queen Charlotte Basin, British Columbia. The basin contains up to 6 km of Tertiary fill and is postulated to have been formed during a transtensional stage of Cenozoic plate motion between the Pacific and North American plates. Several models of basin formation have been proposed to explain the sediment distribution, contemporaneous volcanism and high present-day heat flow. We used bathymetry, Tertiary sediment thickness and crustal thickness to calculate the amount of stretching in the crust and lower lithosphere, and the volume of melt generated during advection of mantle rocks. A second set of calculations traced the thermal evolution of the sediments and lithosphere, and we show maps of estimated present-day heat flow and sediment maturity. This study differs significantly from previous work in the use of gridded data that provide coverage over a large region and permit lateral variations in lithospheric deformation and thermal properties to be clearly defined, a difficult quest in studies based on single-point or profile data. In addition, the use of crustal thickness, derived from a regional interpretation of gravity data and constrained by seismic refraction results, as an input allows reliable estimates of extension to be made despite recent deformation of sedimentary strata in Hecate Strait. We present results for a model which used a prerift crustal thickness of ≈34 km and a short rifting period from 25 to 20 Ma. This model infers that significant thinning occurred beneath south-western Hecate Strait and southern Queen Charlotte Sound, and several kilometres of igneous crust were added at these sites, without requiring elevated asthenospheric temperatures prior to extension. Net lithospheric extension is surprisingly uniform within the basin and averages 76%, or ≈50 km, across the margin. This amount is consistent with other estimates of extension and may provide information useful in refining models of plate motion along this margin.  相似文献   

9.
The Stara Planina is an E–W-trending range within the Balkan belt in central Bulgaria. This topographically high mountain range was the site of Mesozoic through early Cenozoic thrusting and convergence, and its high topography is generally thought to have resulted from crustal shortening associated with those events. However, uplift of this belt appears to be much younger than the age of thrusting and correlates instead with the age of Pliocene–Quaternary normal faulting along the southern side of the range. Flexural modelling indicates the morphology of the range is consistent with flexural uplift of footwall rocks during Pliocene–Quaternary displacement on S-dipping normal faults bounding the south side of the mountains, provided that the effective elastic plate thickness of 12  km under the Moesian platform is reduced to about 3  km under the Stara Planina. This small value of elastic plate thickness under the Stara Planina is similar to values observed in the Basin and Range Province of the western United States, and suggests that weakening of the lithosphere is due to heating of the lithosphere during extension, perhaps to the point that large-scale flow of material is possible within the lower crust. Because weakening is observed to affect the Moesian lithosphere for ≈10  km beyond (north of) the surface expression of extension, this study suggests that processes within the uppermost mantle, such as convection, play an active role in the extension process. The results of this study also suggest that much of the topographic relief in thrust belts where convergence is accompanied by coeval extension in the upper plate (or 'back arc'), such as in the Apennines, may be a flexural response to unloading during normal faulting, rather than a direct response to crustal shortening in the thrust belt.  相似文献   

10.
Summary. New gravity observations from a systematic survey of the Eastern Mediterranean Sea and from a reconnaissance land survey in Central and Western Turkey have been compiled with existing data. Lack of sufficient geological and geophysical information precludes an analysis of the local anomalies or crustal structure; however, implications of the topography and gravity field at long wavelengths have been examined. Negative free-air anomalies characterize almost the entire Eastern Mediterranean basin and positive anomalies predominate in Turkey and the Aegean Sea. The change in sign coincides with the northern boundary of the African plate, and the wavelength and amplitude of the gravity variation are of the order of 1000 km and 100 mgal respectively. The lithosphere is probably unable to support such anomalies because the implied shear stresses are too large. The source of the anomalies is concluded to be in the asthenosphere where the low finite strength of material suggests that some sort of flow must exist to maintain the stresses. A good correlation is observed between the gravity and topography at wavelengths greater than 300 km; and the relationship is the same as that observed in the North Atlantic and the Central Pacific, as well as that computed for simple models of mantle convection. The gravity and topography of the Eastern Mediterranean can be explained in terms of flow in the upper mantle. This is the first region of subsidence for which this interpretation has been made.  相似文献   

11.
Summary. Using the techniques of linear and quadratic programming, it can be shown that the isostatic response function for the continental United States, computed by Lewis & Dorman (1970), is incompatible with any local compensation model that involves only negative density contrasts beneath topographic loads. We interpret the need for positive densities as indicating that compensation is regional rather than local. The regional compensation model that we investigate treats the outer shell of the Earth as a thin elastic plate, floating on the surface of a liquid. The response of such a model can be inverted to yield the absolute density gradient in the plate, provided the flexural rigidity of the plate and the density contrast between mantle and topography are specified.
If only positive density gradients are allowed, such a regional model fits the United States response data provided the flexural rigidity of the plate lies between 1021 and 1022 N m. The fit of the model is insensitive to the mantle/ load density contrast, but certain bounds on the density structure can be established if the model is assumed correct. In particular, the maximum density increase within the plate at depths greater than 34 kin must not exceed 470 kg m−3; this can be regarded as an upper bound on the density contrast at the Mohorovicic discontinuity.
The permitted values of the flexural rigidity correspond to plate thicknesses in the range 5–10 km, yet deformations at depths greater than 20 km are indicated by other geophysical data. We conclude that the plate cannot be perfectly elastic; its effective elastic moduli must be much smaller than the seismically determined values. Estimates of the stress-differences produced in the earth by topographic loads, that use the elastic plate model, together with seismically determined elastic parameters, will be too large by a factor of four or more.  相似文献   

12.
The tectonic subsidence and gravity anomalies in the Malay and Penyu Basins, offshore Peninsular Malaysia, were analysed to determine the isostatic compensation mechanism in order to investigate their origin. These continental extensional basins contain up to 14  km of sediment fill which implies that the crust had been thinned significantly during basin development. Our results suggest, however, that the tectonic subsidence in the basins cannot be explained simply by crustal thinning and Airy isostatic compensation.
The Malay and Penyu Basins are characterized by broad negative free-air gravity anomalies of between −20 and −30  mGal. To determine the cause of the anomaly, we modelled four gravity profiles across the basins using a method that combines two-dimensional flexural backstripping and gravity modelling techniques. We assumed a model of uniform lithospheric stretching and Airy isostasy in the analysis of tectonic subsidence. Our study shows that the basins are probably underlain by relatively thinned crust, indicating that some form of crustal stretching was involved. To explain the observed gravity anomalies, however, the Moho depth that we calculated based on the free-air gravity data is about 25% deeper than the Moho predicted by assuming Airy isostasy (Backstrip Moho). This suggests that the Airy model overestimates the compensation and that the basins are probably undercompensated isostatically. In other words, there is an extra amount of tectonic subsidence that is not compensated by crustal thinning, which has resulted in the discrepancy between the gravity-derived Moho and the Backstrip Moho. We attribute this uncompensated or anomalous tectonic subsidence to thin-skinned crustal extension that did not involve the mantle lithosphere. The Malay and Penyu Basins are interpreted therefore as basins that formed by a combination of whole-lithosphere stretching and thin-skinned crustal extension.  相似文献   

13.
Summary. Flexure studies of the oceanic lithosphere constrained by bathymetry and gravity data suggest that the lithosphere behaves elastically over geological time-scales. For loads to be supported, however, large bending stresses (approaching 10 kb in some cases) are required at the top and bottom of the elastic plate.
These stress-differences can be significantly reduced by introducing more complex rheologies: we propose a model of layered lithosphere, consisting of a purely elastic upper layer, a transition zone with viscosity varying with depth and a perfectly plastic lower layer. The transition layer is grossly centred at the bottom of the elastic plate. Such a model results in a noticeable reduction of stress differences; reaching 60 per cent for flow laws representing creep mechanisms in olivine. When applied to a number of seamount loads, this model leads to maximum stress-differences which do not exceed 1–2kb.
The approach used in this study allows us to follow stress relaxation over time. Taking account of the thermal cooling of the lithosphere, we show that the elastic thickness of the lithosphere is stabilized after a given time, while the time required for stabilization is found to be of the order 5—6 per cent of the age of the lithosphere at the date of loading.  相似文献   

14.
The rifting history of the Atlantic continental margin of Newfoundland is very complex and so far has been investigated at the crustal scale primarily with the use of 2-D seismic surveys. While informative, the results generated from these surveys cannot easily be interpreted in a regional sense due to their sparse sampling of the margin. A 3-D gravity inversion of the free air data over the Newfoundland margin allows us to generate a 3-D density anomaly model that can be compared with the seismic results and used to gain insight into regions lacking seismic coverage. Results of the gravity inversion show good correspondence with Moho depths from seismic results. A shallowing of the Moho to 12 km depth is resolved on the shelf at the northern edge of the Grand Banks, in a region poorly sampled by other methods. Comparisons between sediment thickness and crustal thickness show deviations from local isostatic compensation in locations which correlate with faults and rifting trends. Such insights must act as constraints for future palaeoreconstructions of North Atlantic rifting.  相似文献   

15.
Summary. This paper explores the middle ground between complex thermally-coupled viscous flow models and simple corner flow models of island arc environments. The calculation retains the density-driven nature of convection and relaxes the geometrical constraints of corner flow, yet still provides semianalytical solutions for velocity and stress. A novel aspect of the procedure is its allowance for a coupled elastic lithosphere on top of a Newtonian viscous mantle. Initially, simple box-like density drivers illustrate how vertical and horizontal forces are transmitted through the mantle and how the lithosphere responds by trench formation. The flexural strength of the lithosphere spatially broadens the surface topography and gravity anomalies relative to the functional form of the vertical flow stresses applied to the plate base. I find that drivers in the form of inclined subducting slabs cannot induce self-driven parallel flow; however, the necessary flow can be provided by supplying a basal drag of 1–5 MPa to the mantle from the oceanic lithosphere. These basal drag forces create regional lithospheric stress and they should be quantifiable through seismic observations of the neutral surface. The existence of a shallow elevated phase transition is suggested in two slab models of 300 km length where a maximum excess density of 0.2 g cm−3 was needed to generate an acceptable mantle flow. A North New Hebrides subduction model which satisfies flow requirements and reproduces general features of topography and gravity contains a high shear stress zone (75 MPa) around the upper slab surface to a depth of 150 km and a deviatoric tensional stress in the back arc to a depth of 70 km. The lithospheric stress state of this model suggests that slab detachment is possible through whole plate fracture.  相似文献   

16.
Viscous gravitational relaxation   总被引：2，自引：0，他引：2  
Summary This paper is concerned with a detailed examination of the response of Maxwell models of the planet to surface mass loads. Particular attention is devoted to an examination of the factors which determine the isostatic response since the understanding of this response is crucial in a number of different geodynamic problems. One particular example which we discuss in detail is concerned with the prediction of free air gravity anomalies produced by large-scale deglaciation events. Using the methods developed here we are able to provide the first direct assessment of the importance of initial isostatic disequilibrium on the observed relative sea-level variations and free air gravity anomalies forced by the melting of the Laurentide ice sheet. We are therefore able to estimate the extent to which such initial disequilibrium might influence the inference of mantle viscosity from isostatic adjustment data. Our calculations establish that free air gravity data, although they are sensitive to the degree of initial disequilibrium, provide an extremely high quality constraint upon the viscosity of the lower mantle.  相似文献   

17.
Recent seismic field work has revealed high lower-crustal velocities under Ninetyeast Ridge, Indian Ocean, indicating the presence of crustal underplating ( Grevemeyer et al . 2000 ). We used results from Ocean Drilling Program (ODP) drill cores and cross-spectral analysis of gravity and bathymetric data to study the impact of the underplating body on the subsidence history and the mode of isostatic compensation along Ninetyeast Ridge. Compared with the adjacent Indian basin, the subsidence of Ninetyeast Ridge is profoundly anomalous. Within the first few millions of years after crustal emplacement the ridge subsided rapidly. Thereafter, however, subsidence slowed down significantly. The most reliable model of isostasy suggests loading of a thin elastic plate on and beneath the seafloor. Isostatic compensation of subsurface loading occurs at a depth of about 25 km, which is in reasonably good agreement with seismic constraints. Subsurface loading is inherently associated with buoyant forces acting on the lithosphere. The low subsidence may therefore be the superposition of cooling of the lithosphere and uplift due to buoyant material added at the base of the crust. A model including prolonged crustal growth in the form of subcrustal plutonism may account for all observations.  相似文献   

18.
The relationship between gravity and bathymetry in the Pacific Ocean   总被引：2，自引：0，他引：2  
Summary. Surface-ship and satellite derived data have been compiled in new free-air gravity anomaly, bathymetry and geoid anomaly maps of the Pacific Ocean basin and its margin. The maps are based on smoothed values of the gravity anomaly, bathymetry and geoid interpolated on to a 90 × 90 km grid. Each smoothed value was obtained by Gaussian filtering measurements along individual ship and subsatellite tracks. The resulting maps resolve features in the gravity, bathymetry and geoid with wavelengths that range from a few hundred to a few thousand kilometres. The smoothed values of bathymetry and geoid anomaly have been corrected for age. The resulting maps show the Pacific ocean basin is associated with a number of ENE–WSW-trending geoid anomaly highs with amplitudes of about ± 5 m and wavelengths of about 3000 km. The most prominent of these highs correlate with the Magellan seamounts–Marshall Gilbert Islands–Magellan rise and the Hess rise–Hawaiian ridge regions. The correlation between geoid anomaly and bathymetry cannot be explained by models of static compensation, but is consistent with a model in which the geoid anomaly and bathymetry are supported by some form of dynamic compensation. We suggest that the dynamic compensation, which characterizes oceanic lithosphere older than 80 Myr, is the result of mantle convection on scales that are smaller than the lithospheric plates themselves.  相似文献   

19.
Summary. The surface gravity anomalies for a three-dimensional density model of a dipping lithospheric plate under the Aegean island arc and the Aegean Sea in Greece in the eastern Mediterranean Sea have been calculated. Such a dipping plate has been suggested in geophysical investigations. The calculated gravity maximum over the dipping plate is located in the area of the largest observed Bouguer anomalies inside the island arc. It is suggested that this should be taken into account in studies of crustal structure and gravity in the area.  相似文献   

20.
Summary. A new Bouguer anomaly map of India and its generalized interpretation is presented in this paper. Bouguer anomalies in India show good correlation with the geology and tectonics. Isostatic anomalies in India are primarily geologic anomalies caused by intracrustal inhomogeneities. For example, the negative isostatic anomalies in southern India arise from large thicknesses of granitic bodies in the upper crust and the positive anomaly over the Himalaya may be attributed to a possible thickening of the basalt layer in the lower crust. The gravity data suggest that an overall isostatic equilibrium generally prevails in India and the Himalayan region. Crustal thickness estimates from DSS data in India are comparable to the values obtained from gravity data based on the Ahy's concept of isostatic compensation.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号