共查询到20条相似文献，搜索用时 31 毫秒
1.
影响井下直流电法超前探测效果的因素较多,巷道空腔对全空间电流场分布的影响就是其中之一。论述了有限单元法模拟井下稳定电流场正演模型,介绍了全空间条件下三维模型中的点源电场的边值及变分问题;模拟在巷道内加载定点电流源,通过巷道影响因子研究巷道空腔对全空间稳定电流场分布的影响。数值模拟结果表明,巷道影响与巷道几何尺寸大小、供电电极布置及巷道围岩导电性有关。 相似文献
2.
The spontaneous combustion of coal causes widespread underground coal fires in several countries, amongst which is China. These coal fires cause serious environmental, economic and safety problems. In northern China, the coal fires occur within a wide region stretching 5000 km east-west and 750 km north-south. Remote sensing therefore provides an ideal tool for monitoring this environmental hazard over such a large and remote area. As part of a research project to detect, measure, monitor and extinguish these coal fires, this paper describes a remote-sensing-based multi-sensor data-fusion methodology for detecting the underground fires. The methodology is based on fusing a variety of satellite-based image types (optical, thermal, microwave) together with airborne data (optical and thermal infrared) and ancillary data sources such as geological and topographic maps. The results of the remote-sensing data fusion are presented, using pixel-based, feature-based and decision-based fusion approaches. 相似文献
3.
煤矿井下地震勘探的炸药震源受火工品管控影响大,且无法实现煤矿开采动力地质灾害的监测预警;随采地震是以采煤机为震源的地震探测新技术。本文回顾了国内外随采地震技术的研究现状,介绍了随采地震的方法原理和独特优势,并开展了一些先导性的试验研究利用。结果表明:采煤机震源具有激发能量强、频带宽、安全绿色经济、可重复等特点,可以作为随采地震探测的被动震源;采煤机震源与炸药震源的地震炮集记录接近,后者单炮信噪比相对较高;随采地震数值模拟、大数据动态处理等关键技术急需协同攻关。尽管随采地震尚处于试验研究阶段,但是它将成为未来透明工作面三维动态地质建模、开采动力地质灾害监测预警等重要手段,代表了今后煤矿智能探测技术的发展方向。 相似文献
4.
探地雷达是探测地下结构及其分布规律的一种重要的浅层地球物理探测方法,具有分辨率高、无损、抗干扰能力强、结果直观等优点,在工程物探领域被广泛应用。为提高对地下管线雷达图像特征的认识,确定管线异常体的位置,提高地质雷达的解释精度,利用时域有限差分法(FDTD)对地下管线进行精细化探测,包括对管线埋深、材质、管线内充填物、管线病害等影响因素的数值模拟,以此建立地下管线正演模拟合成图库,进而指导探地雷达实际探测图像的解释工作。现场管线探测结果表明:探地雷达可准确探测出地下管线的埋设位置及运行状态,为今后的维修养护提供了依据。 相似文献
5.
在地下管线弹性波探测中,由位于地下圆孔边界上有限时长的力源激发形成瞬态场,应用波函数展开法对此波场进行建模。以波函数和待定系数组成的级数序列描述探测波场中的势函数,根据界面处应力和位移连续的边界条件求解待定系数,从而得到波场中弹性波的解析解。据此进行数值研究,分析探测波场中弹性波的传播特征,说明了散射波的类型以及能量对比关系,并总结了反射信号幅值与地下管线物理参数之间由声阻抗匹配程度支配的反射信号强度变化规律,而管线半径对反射信号强度的影响要大于物理参数的作用。最后以实验结果验证上述结论。 相似文献
6.
受高瓦斯/承压奥灰水威胁的工作面开采前,一般采取定向钻进技术在工作面底板开展压裂或注浆工程保障开采安全。利用底板定向钻孔开展孔中探测工作,可更加精细揭露工作面内隐伏构造,还可实现“一孔多用”。为解决定向钻孔内的探测问题,提出一种在水平定向钻孔中进行直流电阻率法探查的方法。定向钻孔施工完毕后,退出定向钻孔施工的通缆钻杆,送入内平钻杆,将孔中高密度电缆通过钻杆尾端特制水便送入钻孔,使孔中电缆平铺于钻孔中,在定向钻孔水平段,进行孔内直流电阻率法径向探测。在理论上通过数值模拟研究层状介质下单孔测量工作模式的接收信号衰减规律、视电阻率曲线变化特征、顶底板岩性对测量结果的影响等,并采用单孔测量数据对孔旁异常范围进行反演定位。数值模拟研究表明,孔中电阻率探测方法对隐伏的异常体有良好的探测效果。通过在陕西韩城某矿井下实际煤层底板探测试验,对研究区2个定向抽采钻孔孔中探测数据进行处理,反演结果异常区与工作面内隐伏小断层位置吻合,验证了定向钻孔中电缆布置的可行性和定向钻孔内通过孔内径向和孔间透视探测隐伏构造的可靠性。 相似文献
7.
地下空间资源探测是科学合理开发利用地下空间资源的基本前提,国内各大城市相继开展了地下空间资源调查评价工作,但对地下空间资源探测方法尚未开展系统梳理。在北京城市地下空间资源调查评价工作的基础上,对地下空间资源开发利用2个阶段,即建成区和待建区地下空间资源探测对象和探测方法分别做了阐述,指出建成区的探测对象是已开发利用的地下空间资源,可以采用遥感技术解译建筑物高度,利用建筑物竖向影响深度推算已利用开发地下空间,利用物探手段(电法、磁法、重力、地震)较精确地圈定已开发利用空间;对于待建区,调查对象主要是影响地下空间资源开发利用的地质条件,可以通过相应的地质工作开展调查。最后列举了应用实例,以期为城市地下空间资源探测工作起到借鉴作用。 相似文献
8.
Because of unreasonable coal mining in China, there are many unknown underground caves, and the inhabited environment of humans
is threatened by many geologic hazards, such as cracking of the buildings, ground subsidence, etc. To make the coal companies
aware of the harmfulness of these hazards, it is urgent to determine the reasons for the hazards. In this paper, transient
electromagnetic method (TEM) is used to detect the ground resistance caves, instead of the time-consuming and expensive direct
drilling survey. Numerical results of the 3-D synthetic model and real field survey data are given. The results showed that
the TEM method can be used to detect a complicated air-filled underground 3-D cave and coincide with the results of direct
drilling survey. 相似文献
9.
David R. Hanson Thomas L. Vandergrift Matthew J. DeMarco Kanaan Hanna 《International Journal of Coal Geology》2002,50(1-4)
Today's highly productive coal mining systems represent large capital investments. Careful geotechnical planning and design are essential to protect these systems and to help ensure their overall success. Too often, however, the ability of the mine operator to adequately characterize the geotechnical environment and keep up with changing geologic conditions lags the advance rate of the mining equipment. Seismic tomographic imaging, based on the same principles as medical Computer-Aided-Tomography (CAT) Scans, offers the ability to identify changing geologic conditions, loading patterns, and the location of nearby abandoned mine workings. Although seismic tomography has been used for many years in the oil industry, until recently its practicality in the mining industry has been limited because the processes involved interfered with mining productivity and were labor-intensive in terms of data collection and interpretation. New advancements in signal processing have greatly enhanced the speed, resolution, and range of applications of tomographic imaging in underground coal mine settings.Many tomography applications in the mining industry use seismic velocity and/or attenuation tomography within a volume enclosed by the seismic source and receiver array. Although results obtained using this geometry work well in many situations, recent developments in reflection tomography show promise in eliminating the requirement that the target volume be surrounded by sources/receivers. For example, in-seam seismic reflection tomography may now be used to image structures and/or old workings from one general location in the mine (e.g., face areas of mains and panel developments) well ahead of planned developments—largely eliminating the need to probe-hole drill on regular intervals. These new developments have greatly expanded the ability of the mine operator to cost-effectively characterize previously inaccessible areas of the property.This paper gives an overview of the theories and processes involved in seismic tomography applicable to coal mine settings. Recent examples are presented of tomographic imaging applied to a variety of coal mine ground control problems and old works detection in the United States and Europe. The applicability of both seismic refraction and seismic reflection tomography is discussed. 相似文献
10.
地质雷达是一种探测金属和非金属管道的有效方法,传统方法是利用经验电磁波速度计算管道埋深,存在较大误差,且往往无法估算管径或算法繁琐。蒙特卡洛方法是一种随机模拟的地球物理反演手段,从雷达图像中读取一系列反射回波穿行时间和雷达相对于管顶的位置数据,给定合理的电磁波速度、管道埋深和管径3个参数的范围,可以有效地拟合得到速度、埋深和管径。该方法在南京地铁盾构某区段,用来拟合估算地下输油管、自来水管和污水管的埋深及管径,取得了与实际情况较为一致的结果,拟合的电磁波速度符合地下介质情况。 相似文献
11.
12.
煤矿智能化背景下,随掘地震已经成为掘进工作面安全掘进的地质保障关键技术之一,可实时、超前、精细探明掘进前方的隐蔽地质构造,如采空区、断层、陷落柱等,有效促进掘进生产安全高效。不同于广泛采用的反射槽波超前探测技术,随掘地震采用了掘进机掘进时震动信号作为激发源,替代了常规地震勘探中的炸药震源,具有震源绿色、安全、成本低、可重复、探掘同步等优点。由于掘进机震源在激发方式、能量、频率、带宽等方面与炸药震源差别较大,因此其探测性能受到很多关注。从随掘地震的震源机制、波场特征、传播距离、成像准确率等方面进行研究,详细分析其探测性能,认为随掘地震波场中槽波和横波发育,可利用槽波或横波进行超前探测;Y分量具有更好的信噪比优势,但在实际应用时考虑到反射面的走向,相同设备量情况下,Z分量更有优势;随掘地震的直达横波传播距离可达700 m以上,横波超前探测距离可达到300 m以上;随掘地震的直达槽波传播距离可达400 m 以上,槽波超前探测距离可达到170 m以上;常规掘进速度下,反射波叠加次数可达到16次,相比常规的一次探测,信噪比可提升4倍,有效提高了探测精度和准确度。后续将通过大量的随掘应用数据进一步修正随掘地震技术的性能参数。 相似文献
13.
14.
15.
紫金山金-铜矿露天采矿场地下不明空区的地质雷达探测 总被引：4，自引：0，他引：4
采用先进的地球物理技术探明露天采矿场地下不明空区的分布情况,准确确定其平面分布范围、顶面埋深及空间高度,对保障露天采矿作业的安全进行、预防突发性事故的发生具有十分重要的意义。运用地质雷达对福建紫金山金铜矿露天采矿场地下不明空区进行探测,在两个不同探测区块共完成18条探测剖面,剖面线总长近4km;经处理后的实测地质雷达剖面具有高清晰度、高分辨率,能准确反映地下各种不同规模的不明采空区的属性、平面位置、顶板埋藏深度、空区大致高度;地质雷达探测共查明较大空区异常55个。采用50MHz天线的地质雷达系统在该露采场的有效探测深度可以达40m以上。在露天采矿场,地质雷达探测受矿区地形条件及环境影响很小,可直接在岩（矿）石表面进行,不受第四系覆盖层对雷达波衰减吸收的影响。因此,地质雷达非常适应露天采矿场地下采空区的探测及定位。 相似文献
16.
17.
Summary This paper focuses on the methodology and techniques developed to characterize the rock fragments produced by blasting in an underground environment. This work formed part of an integrated approach to the optimization of blasting design at a Canadian mine. Details are given of the photographic and image analysis techniques adopted, together with data from a program of full scale, study blasts in the mine. Features of the observed fragmentation are reviewed which related to controlled variation in the blast designs, together with other factors which were observed both to influence fragmentation characteristics and to interact with loading equipment productivity. 相似文献
18.
The use of key-block theory for the analysis of blocky rock mass structures in mining and civil engineering is well established. Such methods have traditionally been used to analyse the stability of rock blocks at free surfaces only. These methods have also been limited to the analysis of relatively few discontinuities, usually assumed to be infinitely persistent. 相似文献
19.
Natural Hazards - Metro systems perform a significant function for millions of ridership worldwide as urban passengers rely on a secure, reliable, and accessible underground transportation way for... 相似文献
20.
Hydrological tracing practice on underground contaminations 总被引：1，自引：0，他引：1
W. A. Käss 《Environmental Geology》1994,23(1):23-29
The hydrological tracing technique is an important tool for the risk assessment of problem sites, the so-called Altlasten (old underground contaminations). The penetration of leachate through the unsaturated zone, the transport velocity, the migration pathways, as well as the dispersion in the aquifer can be determined by tracing experiments. A wide range of tracers offer sufficient possibilities to get the necessary hydrogeologic parameters for any kind of Altlasten. This is shown by some examples.An English version of Hydrologische Markierungstechnik bei der Altlastensanierung in: Die Geowissenschaften, Weinheim 10(2): 199–205 相似文献