首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
On the selection of GMPEs for Vrancea subcrustal seismic source   总被引：2，自引：0，他引：2  
The Vrancea subcrustal seismic source is characterized by large magnitude ( $M_{W} \ge 7$ ) intermediate-depth earthquakes that occur two or three times during a century on average. In this study several procedures are used to grade four candidate ground motion prediction equations proposed for Vrancea source in the SHARE project. In the work of Delavaud et al. (J Seismol 16(3):451–473, 2012) four ground motion prediction models developed for subduction zones (Zhao et al. in Bull Seism Soc Am 96(3):898–913, 2006; Atkinson and Boore in Bull Seism Soc Am 93(4):1703–1729, 2003; Youngs et al. in Seism Res Lett 68(1):58–73, 1997; Lin and Lee in Bull Seism Soc Am 98(1):220–240, 2008) are suggested as suitable for Vrancea subcrustal seismic source. The paper presents the appropriateness analysis of the four suggested ground motion prediction equations done using a dataset of 109 triaxial accelerograms recorded during seven Vrancea seismic events with moment magnitude $M_{W}$ between 5.4 and 7.4, occurred in the past 35 years. The strong ground motions were recorded in Romania, as well as in Bulgaria, Republic of Moldova and Serbia. Based on the ground motion dataset several goodness-of-fit measures are used in order to quantify how well the selected models match with the recorded data. The compatibility of the four ground motion prediction models with respect to magnitude scaling and distance scaling implied by strong ground motion dataset is investigated as well. The analyses show that the Youngs et al. (Seism Res Lett 68(1):58–73, 1997) and Zhao et al. (Bull Seism Soc Am 96(3):898–913, 2006) ground motion prediction models have a better fit with the data and can be candidate models for Probabilistic Seismic Hazard Assessment.  相似文献   

2.
One of the major challenges related with the current practice in seismic hazard studies is the adjustment of empirical ground motion prediction equations (GMPEs) to different seismological environments. We believe that the key to accommodating differences in regional seismological attributes of a ground motion model lies in the Fourier spectrum. In the present study, we attempt to explore a new approach for the development of response spectral GMPEs, which is fully consistent with linear system theory when it comes to adjustment issues. This approach consists of developing empirical prediction equations for Fourier spectra and for a particular duration estimate of ground motion which is tuned to optimize the fit between response spectra obtained through the random vibration theory framework and the classical way. The presented analysis for the development of GMPEs is performed on the recently compiled reference database for seismic ground motion in Europe (RESORCE-2012). Although, the main motivation for the presented approach is the adjustability and the use of the corresponding model to generate data driven host-to-target conversions, even as a standalone response spectral model it compares reasonably well with the GMPEs of Ambraseys et al. (Bull Earthq Eng 3:1–53, 2005), Akkar and Bommer (Seismol Res Lett 81(2):195–206, 2010) and Akkar and Cagnan (Bull Seismol Soc Am 100(6):2978–2995, 2010).  相似文献   

3.
Earthquake early warning systems (EEWS) are considered to be an effective, pragmatic, and viable tool for seismic risk reduction in cities. While standard EEWS approaches focus on the real-time estimation of an earthquake’s location and magnitude, innovative developments in EEWS include the capacity for the rapid assessment of damage. Clearly, for all public authorities that are engaged in coordinating emergency activities during and soon after earthquakes, real-time information about the potential damage distribution within a city is invaluable. In this work, we present a first attempt to design an early warning and rapid response procedure for real-time risk assessment. In particular, the procedure uses typical real-time information (i.e., P-wave arrival times and early waveforms) derived from a regional seismic network for locating and evaluating the size of an earthquake, information which in turn is exploited for extracting a risk map representing the potential distribution of damage from a dataset of predicted scenarios compiled for the target city. A feasibility study of the procedure is presented for the city of Bishkek, the capital of Kyrgyzstan, which is surrounded by the Kyrgyz seismic network by mimicking the ground motion associated with two historical events that occurred close to Bishkek, namely the 1911 Kemin (M?=?8.2; ±0.2) and the 1885 Belovodsk (M?=?6.9; ±0.5) earthquakes. Various methodologies from previous studies were considered when planning the implementation of the early warning and rapid response procedure for real-time risk assessment: the Satriano et al. (Bull Seismol Soc Am 98(3):1482–1494, 2008) approach to real-time earthquake location; the Caprio et al. (Geophys Res Lett 38:L02301, 2011) approach for estimating moment magnitude in real time; the EXSIM method for ground motion simulation (Motazedian and Atkinson, Bull Seismol Soc Am 95:995–1010, 2005); the Sokolov (Earthquake Spectra 161: 679–694, 2002) approach for estimating intensity from Fourier amplitude spectra; and the Tyagunov et al. (Nat Hazard Earth Syst Sci 6:573–586, 2006) approach for risk computation. Innovatively, all these methods are jointly applied to assess in real time the seismic risk of a particular target site, namely the city of Bishkek. Finally, the site amplification and vulnerability datasets considered in the proposed methodology are taken from previous studies, i.e., Parolai et al. (Bull Seismol Soc Am, 2010) and Bindi et al. (Soil Dyn Earthq Eng, 2011), respectively.  相似文献   

4.
In a companion article Akkar et al. (Bull Earthq Eng, doi:10.1007/s10518-013-9461-4, 2013a; Bull Earthq Eng, doi:10.1007/s10518-013-9508-6, 2013b) present a new ground-motion prediction equation (GMPE) for estimating 5 %-damped horizontal pseudo-acceleration spectral (PSA) ordinates for shallow active crustal regions in Europe and the Middle East. This study provides a supplementary viscous damping model to modify 5 %-damped horizontal spectral ordinates of Akkar et al. (Bull Earthq Eng, doi:10.1007/s10518-013-9461-4 2013a; Bull Earthq Eng, doi:10.1007/s10518-013-9508-6, 2013b) for damping ratios ranging from 1 to 50 %. The paper also presents another damping model for scaling 5 %-damped vertical spectral ordinates that can be estimated from the vertical-to-horizontal (V/H) spectral ratio GMPE that is also developed within the context of this study. For consistency in engineering applications, the horizontal and vertical damping models cover the same damping ratios as noted above. The article concludes by introducing period-dependent correlation coefficients to compute horizontal and vertical conditional mean spectra (Baker in J Struct Eng 137:322–331, 2011). The applicability range of the presented models is the same as of the horizontal GMPE proposed by Akkar et al. (Bull Earthq Eng, doi:10.1007/s10518-013-9461-4 2013a; Bull Earthq Eng, doi:10.1007/s10518-013-9508-6, 2013b): as for spectral periods $0.01 \hbox { s}\le \,\hbox {T}\le \,4\hbox { s}$ as well as PGA and PGV for V/H model; and in terms of seismological estimator parameters $4\le \hbox {M}_\mathrm{w} \le 8, \hbox { R} \le 200 \hbox { km}, 150\hbox { m/s}\le \hbox { V}_\mathrm{S30}\le $ 1,200 m/s, for reverse, normal and strike-slip faults. The source-to-site distance measures that can be used in the computations are epicentral $(\hbox {R}_\mathrm{epi})$ , hypocentral $(\hbox {R}_\mathrm{hyp})$ and Joyner–Boore $(\hbox {R}_\mathrm{JB})$ distances. The implementation of the proposed GMPEs will facilitate site-specific adjustments of the spectral amplitudes predicted from probabilistic seismic hazard assessment in Europe and the Middle East region. They can also help expressing the site-specific design ground motion in several formats. The consistency of the proposed models together with the Akkar et al. (Bull Earthq Eng, doi:10.1007/s10518-013-9461-4 2013a; Bull Earthq Eng, doi:10.1007/s10518-013-9508-6, 2013b) GMPE may be advantageous for future modifications in the ground-motion definition in Eurocode 8 (CEN in Eurocode 8, Design of structures for earthquake resistance—part 1: general rules, seismic actions and rules for buildings. European Standard NF EN 1998-1, Brussels, 2004).  相似文献   

5.
We applied the maximum likelihood method produced by Kijko and Sellevoll (Bull Seismol Soc Am 79:645–654, 1989; Bull Seismol Soc Am 82:120–134, 1992) to study the spatial distributions of seismicity and earthquake hazard parameters for the different regions in western Anatolia (WA). Since the historical earthquake data are very important for examining regional earthquake hazard parameters, a procedure that allows the use of either historical or instrumental data, or even a combination of the two has been applied in this study. By using this method, we estimated the earthquake hazard parameters, which include the maximum regional magnitude $ \hat{M}_{\max } , $ the activity rate of seismic events and the well-known $ \hat{b} $ value, which is the slope of the frequency-magnitude Gutenberg-Richter relationship. The whole examined area is divided into 15 different seismic regions based on their tectonic and seismotectonic regimes. The probabilities, return periods of earthquakes with a magnitude M?≥?m and the relative earthquake hazard level (defined as the index K) are also evaluated for each seismic region. Each of the computed earthquake hazard parameters is mapped on the different seismic regions to represent regional variation of these parameters. Furthermore, the investigated regions are classified into different seismic hazard level groups considering the K index. According to these maps and the classification of seismic hazard, the most seismically active regions in WA are 1, 8, 10 and 12 related to the Alia?a Fault and the Büyük Menderes Graben, Aegean Arc and Aegean Islands.  相似文献   

6.
Ground motions are estimated at 55 sites in Delhi, the capital of India from four postulated earthquakes (three regional M w?=?7.5, 8.0, and 8.5 and one local). The procedure consists of (1) synthesis of ground motion at a hard reference site (NDI) and (2) estimation of ground motion at other sites in the city via known transfer functions and application of the random vibration theory. This work provides a more extensive coverage than earlier studies (e.g., Singh et al., Bull Seism Soc Am 92:555–569, 2002; Bansal et al., J Seismol 13:89–105, 2009). The Indian code response spectra corresponding to Delhi (zone IV) are found to be conservative at hard soil sites for all postulated earthquakes but found to be deficient for M w?=?8.0 and 8.5 earthquakes at soft soil sites. Spectral acceleration maps at four different natural periods are strongly influenced by the shallow geological and soil conditions. Three pockets of high acceleration values are seen. These pockets seem to coincide with the contacts of (a) Aravalli quartzite and recent Yamuna alluvium (towards the East), (b) Aravalli quartzite and older quaternary alluvium (towards the South), and (c) older quaternary alluvium and recent Yamuna alluvium (towards the North).  相似文献   

7.
Rapid magnitude estimate procedures represent a crucial part of proposed earthquake early warning systems. Most of these estimates are focused on the first part of the P-wave train, the earlier and less destructive part of the ground motion that follows an earthquake. Allen and Kanamori (Science 300:786–789, 2003) proposed to use the predominant period of the P-wave to determine the magnitude of a large earthquake at local distance and Olivieri et al. (Bull Seismol Soc Am 185:74–81, 2008) calibrated a specific relation for the Italian region. The Mw 6.3 earthquake hit Central Italy on April 6, 2009 and the largest aftershocks provide a useful dataset to validate the proposed relation and discuss the risks connected to the extrapolation of magnitude relations with a poor dataset of large earthquake waveforms. A large discrepancy between local magnitude (ML) estimated by means of $\tau_p^{{\rm max}}$ evaluation and standard ML (6.8 ± 1.5 vs. 5.9 ± 0.4) suggests using caution when ML vs. $\tau_p^{{\rm max}}$ calibrations do not include a relevant dataset of large earthquakes. Effects from large residuals could be mitigated or removed introducing selection rules on τ p function, by regionalizing the ML vs. $\tau_p^{{\rm max}}$ function in the presence of significant tectonic or geological heterogeneity, and using probabilistic and evolutionary methods.  相似文献   

8.
This article presents the latest generation of ground-motion models for the prediction of elastic response (pseudo-) spectral accelerations, as well as peak ground acceleration and velocity, derived using pan-European databases. The models present a number of novelties with respect to previous generations of models (Ambraseys et al. in Earthq Eng Struct Dyn 25:371–400, 1996, Bull Earthq Eng 3:1–53, 2005; Bommer et al. in Bull Earthq Eng 1:171–203, 2003; Akkar and Bommer in Seismol Res Lett 81:195–206, 2010), namely: inclusion of a nonlinear site amplification function that is a function of $\text{ V }_\mathrm{S30}$ and reference peak ground acceleration on rock; extension of the magnitude range of applicability of the model down to $\text{ M }_\mathrm{w}$ 4; extension of the distance range of applicability out to 200 km; extension to shorter and longer periods (down to 0.01 s and up to 4 s); and consistent models for both point-source (epicentral, $\text{ R }_\mathrm{epi}$ , and hypocentral distance, $\text{ R }_\mathrm{hyp}$ ) and finite-fault (distance to the surface projection of the rupture, $\text{ R }_\mathrm{JB}$ ) distance metrics. In addition, data from more than 1.5 times as many earthquakes, compared to previous pan-European models, have been used, leading to regressions based on approximately twice as many records in total. The metadata of these records have been carefully compiled and reappraised in recent European projects. These improvements lead to more robust ground-motion prediction equations than have previously been published for shallow (focal depths less than 30 km) crustal earthquakes in Europe and the Middle East. We conclude with suggestions for the application of the equations to seismic hazard assessments in Europe and the Middle East within a logic-tree framework to capture epistemic uncertainty.  相似文献   

9.
It has been two decades since the last comprehensive standard model of ambient earth noise was published Peterson (Observations and modelling of seismic background noise, US Geological Survey, open-file report 93–322, 1993). The PETERSON model was updated by analyzing the absolute quietest conditions for stations within the GSN (Berger et al. in J Geophys Res 109, 2005; Mcnamara and Buland in Bull Seism Soc Am 94:1517–1527, 2004; Ringler et al. in Seismol Res Lett 81(4) doi:10.1785/gssrl.81.4.605, 2010). Unfortunately, both the original model and the updated models did not include any deployed station in North Africa and Middle East, which reflects the noise levels within the desert environment of those regions. In this study, a survey was conducted to create a new seismic noise model from very broadband stations which recently deployed in North Africa. For this purpose, 1 year of continuous recording of seismic noise data of the Egyptian National Seismic Network (ENSN) was analyzed in order to create a new noise model. Seasonal and diurnal variations in noise spectra were recorded at each station. Moreover, we constructed a new noise model for each individual station. Finally, we obtained a new cumulative noise model for all the stations. We compared the new high-noise model (EHNM) and new low-noise model (ELNM) with both the high-noise model (NHNM) and low-noise model (NLNM) of Peterson (Observations and modelling of seismic background noise, US Geological Survey, open-file report 93–322, 1993). The obtained noise levels are considerably lower than low-noise model of Peterson (Observations and modelling of seismic background noise, US Geological Survey, open-file report 93–322, 1993) at ultra long period band (ULP band), but they are still below the high-noise model of Peterson (Observations and modelling of seismic background noise, US Geological Survey, open-file report 93–322, 1993). The results of this study could be considered as a first step to create permanent seismic noise models for North Africa and Middle East regions.  相似文献   

10.
We summarize the main elements of a ground-motion model, as built in three-year effort within the Earthquake Model of the Middle East (EMME) project. Together with the earthquake source, the ground-motion models are used for a probabilistic seismic hazard assessment (PSHA) of a region covering eleven countries: Afghanistan, Armenia, Azerbaijan, Cyprus, Georgia, Iran, Jordan, Lebanon, Pakistan, Syria and Turkey. Given the wide variety of ground-motion predictive models, selecting the appropriate ones for modeling the intrinsic epistemic uncertainty can be challenging. In this respect, we provide a strategy for ground-motion model selection based on data-driven testing and sensitivity analysis. Our testing procedure highlights the models of good performance in terms of both data-driven and non-data-driven testing criteria. The former aims at measuring the match between the ground-motion data and the prediction of each model, whereas the latter aims at identification of discrepancies between the models. The selected set of ground models were directly used in the sensitivity analyses that eventually led to decisions on the final logic tree structure. The strategy described in great details hereafter was successfully applied to shallow active crustal regions, and the final logic tree consists of four models (Akkar and Ça?nan in Bull Seismol Soc Am 100:2978–2995, 2010; Akkar et al. in Bull Earthquake Eng 12(1):359–387, 2014; Chiou and Youngs in Earthq Spectra 24:173–215, 2008; Zhao et al. in Bull Seismol Soc Am 96:898–913, 2006). For other tectonic provinces in the considered region (i.e., subduction), we adopted the predictive models selected within the 2013 Euro-Mediterranean Seismic Hazard Model (Woessner et al. in Bull Earthq Eng 13(12):3553–3596, 2015). Finally, we believe that the framework of selecting and building a regional ground-motion model represents a step forward in ground-motion modeling, particularly for large-scale PSHA models.  相似文献   

11.
Ground-motion prediction equations (GMPEs) are essential tools in seismic hazard studies to estimate ground motions generated by potential seismic sources. Global GMPEs which are based on well-compiled global strong-motion databanks, have certain advantages over local GMPEs, including more sophisticated parameters in terms of distance, faulting style, and site classification but cannot guarantee the local/region-specific propagation characteristics of shear wave (e.g., geometric spreading behavior, quality factor) for different seismic regions at larger distances (beyond about 80 km). Here, strong-motion records of northern Iran have been used to estimate the propagation characteristics of shear wave and determine the region-specific adjustment parameters for three of the NGA-West2 GMPEs to be applicable in northern Iran. The dataset consists of 260 three-component records from 28 earthquakes, recorded at 139 stations, with moment magnitudes between 4.9 and 7.4, horizontal distance to the surface projection of the rupture (R JB) less than 200 km, and average shear-wave velocity over the top 30 m of the subsurface (V S30) between 155 and 1500 m/s. The paper also presents the ranking results for three of the NGA-West2 GMPEs against strong motions recorded in northern Iran, before and after adjustment for region-dependent attenuation characteristics. The ranking is based on the likelihood and log-likelihood methods (LH and LLH) proposed by Scherbaum et al. (Bull Seismol Soc Am 94: 2164–2185, 2004, Bull Seismol Soc Am 99, 3234–3247, 2009, respectively), the Nash–Sutcliffe model efficiency coefficient (Nash and Sutcliffe, J Hydrol 10:282–290, 1970), and the EDR method of Kale and Akkar (Bull Seismol Soc Am 103:1069–1084, 2012). The best-fitting models over the whole frequency range are the ASK14 and BSSA14 models. Taking into account that the models’ performances were boosted after applying the adjustment factors, at least moderate regional variation of ground motions is highlighted. The regional adjustment based on the Iranian database reveals an upward trend (indicated as high Q factor) for the selected database. Further investigation to determine adjustment factors based on a much richer database of the Iranian strong-motion records is of utmost important for seismic hazard and risk analysis studies in northern Iran, containing major cities including the capital city of Tehran.  相似文献   

12.
A systematic analysis was conducted of the different variability components that affect the prediction of $\text{ log }_{10}(PSA)$ (i.e., Pseudo-Spectral Acceleration) ordinates on (mostly) deep sedimentary soil sites using a sizable set of strong motion data recorded in the strong earthquake sequences of 2010 and 2012 in the Canterbury region of New Zealand. Following recent, well established approaches of residual analysis of ground motion predictions, as well as recent GMPEs based on a global dataset, it was found that the event-corrected single-station standard deviation (“sigma”) is strongly decreased, for all selected stations, with respect to the uncorrected sigma. Likewise, the event-corrected intraevent sigma estimated for the entire dataset is significantly reduced compared to the standard deviation associated to ground motion prediction models, i.e. the “ergodic” sigma, for all spectral periods. The event-corrected sigma values for the present dataset are surprisingly consistent with those recently derived using KiK-Net strong motion data from Japan and those by Boore and Atkinson (Earthq Spectra 34(1):99–138, 2008) GMPE, and remain fairly constant with respect to the spectral period at about $0.15\sim 0.2$ . An interpretation was provided of the physical meaning of the site correction term ( ${\delta }S2S)_{s}$ indicating a plausible correlation with prevailing geological conditions in the site area.  相似文献   

13.
Records of the Niigata Chuetsu-Oki earthquake (July, 16, 2007, M w?=?6.6, depth ~17?km) and its aftershocks from seismic vertical arrays deployed at the territory of the Kashiwazaki-Kariwa nuclear power plant (~15?km from the fault) are used to study the soil behavior down to ~250?m during strong ground motion. Nonlinear models of soil behavior during the main shock and six aftershocks are constructed, and stresses and strains induced by the strong motion in the soil layers at various depths are estimated. The data are processed using the method developed by Pavlenko and Irikura (Bull Seismol Soc Am 96(6): 2131–2145, 2003) and previously applied for studying the soil behavior in near-fault zones during the 1995 Kobe and 2000 Tottori earthquakes. A rather good agreement between the recorded and simulated acceleration time histories testifies to the validity of the obtained vertical distributions of stresses and strains in soil layers. In the upper, softer layers (~45?m) at the territory of the plant, the shear moduli were reduced by ~30–35% during the main shock and by ~1.5–3% during the aftershocks. The constructed models of soil behavior can be used in scenario earthquake shaking maps of Japan where, based on source modeling parameters, the level of strong motion can be evaluated for the territory of the power plant in future earthquakes with various magnitudes and fault planes. Using methods of stochastic finite-fault modeling of ground motions from the Chuetsu-Oki earthquake, we estimated input motion to the soil layers during the main shock and found that it differs from the imposed motion (recorded by the deepest sensor of the vertical array) by slightly decreased (by a factor of ~1.2) low-frequency (f?<?10?Hz) spectral components.  相似文献   

14.
Three-dimensional frequency dependent S-wave quality factor (Qβ(f)) value for the central Honshu region of Japan has been determined in this paper using an algorithm based on inversion of strong motion data. The method of inversion for determination of three-dimensional attenuation coefficients is proposed by Hashida and Shimazaki (J Phys Earth. 32, 299–316, 1984) and has been used and modified by Joshi (Curr Sci. 90, 581–585, 2006; Nat Hazards. 43, 129–146, 2007) and Joshi et al. (J. Seismol. 14, 247–272, 2010). Twenty-one earthquakes digitally recorded on strong motion stations of Kik-net network have been used in this work. The magnitude of these earthquake ranges from 3.1 to 4.2 and depth ranging from 5 to 20 km, respectively. The borehole data having high signal to noise ratio and minimum site effect is used in the present work. The attenuation structure is determined by dividing the entire area into twenty-five three-dimensional blocks of uniform thickness having different frequency-dependent shear wave quality factor. Shear wave quality factor values have been determined at frequencies of 2.5, 7.0 and 10 Hz from record in a rectangular grid defined by 35.4°N to 36.4°N and 137.2°E to 138.2°E. The obtained attenuation structure is compared with the available geological features in the region and comparison shows that the obtained structure is capable of resolving important tectonic features present in the area. The proposed attenuation structure is compared with the probabilistic seismic hazard map of the region and shows that it bears some remarkable similarity in the patterns seen in seismic hazard map.  相似文献   

15.
We estimate the corner frequencies of 20 crustal seismic events from mainshock–aftershock sequences in different tectonic environments (mainshocks 5.7 < M W < 7.6) using the well-established seismic coda ratio technique (Mayeda et al. in Geophys Res Lett 34:L11303, 2007; Mayeda and Malagnini in Geophys Res Lett, 2010), which provides optimal stability and does not require path or site corrections. For each sequence, we assumed the Brune source model and estimated all the events’ corner frequencies and associated apparent stresses following the MDAC spectral formulation of Walter and Taylor (A revised magnitude and distance amplitude correction (MDAC2) procedure for regional seismic discriminants, 2001), which allows for the possibility of non-self-similar source scaling. Within each sequence, we observe a systematic deviation from the self-similar \( M_{0} \propto \mathop f\nolimits_{\text{c}}^{ - 3} \) line, all data being rather compatible with \( M_{0} \propto \mathop f\nolimits_{\text{c}}^{ - (3 + \varepsilon )} \) , where ε > 0 (Kanamori and Rivera in Bull Seismol Soc Am 94:314–319, 2004). The deviation from a strict self-similar behavior within each earthquake sequence of our collection is indicated by a systematic increase in the estimated average static stress drop and apparent stress with increasing seismic moment (moment magnitude). Our favored physical interpretation for the increased apparent stress with earthquake size is a progressive frictional weakening for increasing seismic slip, in agreement with recent results obtained in laboratory experiments performed on state-of-the-art apparatuses at slip rates of the order of 1 m/s or larger. At smaller magnitudes (M W < 5.5), the overall data set is characterized by a variability in apparent stress of almost three orders of magnitude, mostly from the scatter observed in strike-slip sequences. Larger events (M W > 5.5) show much less variability: about one order of magnitude. It appears that the apparent stress (and static stress drop) does not grow indefinitely at larger magnitudes: for example, in the case of the Chi–Chi sequence (the best sampled sequence between M W 5 and 6.5), some roughly constant stress parameters characterize earthquakes larger than M W ~ 5.5. A representative fault slip for M W 5.5 is a few tens of centimeters (e.g., Ide and Takeo in J Geophys Res 102:27379–27391, 1997), which corresponds to the slip amount at which effective lubrication is observed, according to recent laboratory friction experiments performed at seismic slip velocities (V ~ 1 m/s) and normal stresses representative of crustal depths (Di Toro et al. in Nature in press, 2011, and references therein). If the observed deviation from self-similar scaling is explained in terms of an asymptotic increase in apparent stress (Malagnini et al. in Pure Appl Geophys, 2014, this volume), which is directly related to dynamic stress drop on the fault, one interpretation is that for a seismic slip of a few tens of centimeters (M W ~ 5.5) or larger, a fully lubricated frictional state may be asymptotically approached.  相似文献   

16.
Site effect is usually associated with local geological conditions, which increase or decrease the level of shaking compared with standard attenuation relations. We made an attempt to see in the macroseismic data of Italy some other effects, namely, hot/cold spots in the terminology of Olsen (in Bull. Seismol. Soc. Am. 90, 6B, 577?C594, 2000), which are related to local fault geometry rather than to soil conditions. We give a list of towns and villages liable to amplify (+) or to reduce (?C) the level of shaking in comparison with the nearby settlements. Relief and soil conditions cannot always account for the anomalous sites. Further, there are sites where both (+) and (?C) effects are observed depending on the earthquake. The opposite effects can be generated by events from the same seismotectonic zone and along the same direction to the site. Anomalous sites may group themselves into clusters of different scales. All isolated anomalous patterns presented in this paper can be used in hazard analysis, in particular, for the modeling and testing of seismic effects.  相似文献   

17.
A recently compiled, comprehensive, and good-quality strong-motion database of the Iranian earthquakes has been used to develop local empirical equations for the prediction of peak ground acceleration (PGA) and 5%-damped pseudo-spectral accelerations (PSA) up to 4.0 s. The equations account for style of faulting and four site classes and use the horizontal distance from the surface projection of the rupture plane as a distance measure. The model predicts the geometric mean of horizontal components and the vertical-to-horizontal ratio. A total of 1551 free-field acceleration time histories recorded at distances of up to 200 km from 200 shallow earthquakes (depth < 30 km) with moment magnitudes ranging from Mw 4.0 to 7.3 are used to perform regression analysis using the random effects algorithm of Abrahamson and Youngs (Bull Seism Soc Am 82:505–510, 1992), which considers between-events as well as within-events errors. Due to the limited data used in the development of previous Iranian ground motion prediction equations (GMPEs) and strong trade-offs between different terms of GMPEs, it is likely that the previously determined models might have less precision on their coefficients in comparison to the current study. The richer database of the current study allows improving on prior works by considering additional variables that could not previously be adequately constrained. Here, a functional form used by Boore and Atkinson (Earthquake Spect 24:99–138, 2008) and Bindi et al. (Bull Seism Soc Am 9:1899–1920, 2011) has been adopted that allows accounting for the saturation of ground motions at close distances. A regression has been also performed for the V/H in order to retrieve vertical components by scaling horizontal spectra. In order to take into account epistemic uncertainty, the new model can be used along with other appropriate GMPEs through a logic tree framework for seismic hazard assessment in Iran and Middle East region.  相似文献   

18.
We investigated frequency-magnitude distribution (FMD) of acoustic emissions (AE) occurring near an active mining front in a South African gold mine, using a catalog developed from an AE network, which is capable of detecting AEs down to M W  ?5. When records of blasts were removed, FMDs of AEs obeyed a Gutenberg?Richter law with similar b values, not depending on post-blasting time from the initial 1-min interval through more than 30 h. This result denies a suggestion in a previous study (Richardson and Jordan Bull Seismol Soc Am, 92:1766–1782, 2002) that new fractures generated by blasting disturb the size distribution of background events, which they interpreted as slip events on existing weak planes. Our AE catalog showed that the GR law with b ～ 1.2 was valid between M W  ?3.7 and 0 for AEs around the mining front. Further, using the mine’s seismic catalog, which covers a longer time period of the same area, we could extend the validity range of the GR law with the same b value up to M W 1.  相似文献   

19.
A total of 144 free-field ground motions with closest site-to-rupture distances (Rrup) less than 200 km recorded during the 2010 Mw 7.2 El Mayor–Cucapah earthquake are used to investigate predictive capabilities of the next generation attenuation (NGA) ground-motion prediction equations (GMPE). The NGA GMPEs underpredict observed spectral accelerations at sites with shear wave velocity in the upper 30 m of the site (Vs30) between 180 and 366 m/s with Rrup from about 10 to 50 km and overpredict at sites with Rrup from about 50 to 200 km. Intra-event residuals of the NGA GMPEs exhibit a noticeable negative trend for peak ground acceleration and 0.3, 1.0, and 2.0 s periods. Comparison of the inter-event residual between the 2010 Mw 7.2 El Mayor–Cucapah earthquake and the NGA dataset reveals that short-period inter-event residuals from the 2010 Mw 7.2 El Mayor–Cucapah earthquake is within the scatter of inter-event residuals from the NGA dataset but long-period inter-event residuals do not appear within of the scatter of inter-event residuals from the NGA dataset. Spectral accelerations predicted by the NGA GMPEs are generally unbiased against Vs30 and periods of less than 4.0 s. Observed spectral accelerations show a stronger Vs30 dependence for both short and long periods compared with the NGA GMPEs. The Boore and Atkinson (Earthq Spectra 24(1):99–138, 2008) and Chiou and Youngs (Earthq Spectra 24(1):173–215, 2008) GMPEs perform better in predicting observed short-period spectral accelerations at the sites with Vs30 between 180 and 250 m/s than the Abrahamson and Silva (Earthq Spectra 24(1):67–97, 2008) and Campbell and Bozorgnia (Earthq Spectra 24(1):139–171, 2008) GMPEs.  相似文献   

20.
We apply the Bakun and Wentworth (Bull Seism Soc Am 87:1502–1521, 1997) method to determine the location and magnitude of earthquakes occurred in Central Asia using MSK-64 intensity assignments. The attenuation model previously derived and validated by Bindi et al. (Geophys J Int, 2013) is used to analyse 21 earthquakes that occurred over the period 1885–1964, and the estimated locations and magnitudes are compared to values available in literature. Bootstrap analyses are performed to estimate the confidence intervals of the intensity magnitudes, as well as to quantify the location uncertainty. The analyses of seven significant earthquakes for the hazard assessment are presented in detail, including three large historical earthquakes that struck the northern Tien-Shan between the end of the nineteenth and the beginning of the twentieth centuries: the 1887, M 7.3 Verny, the 1889, M 8.3 Chilik and the 1911, M 8.2 Kemin earthquakes. Regarding the 1911, Kemin earthquake the magnitude values estimated from intensity data are lower (i.e. MILH?=?7.8 and MIW?=?7.6 considering surface wave and moment magnitude, respectively) than the value M?=?8.2 listed in the considered catalog. These values are more in agreement with the value M S?=?7.8 revised by Abe and Noguchi (Phys Earth Planet In, 33:1–11, 1983b) for the surface wave magnitude. For the Kemin earthquake, the distribution of the bootstrap solutions for the intensity centre reveal two minima, indicating that the distribution of intensity assignments do not constrain a unique solution. This is in agreement with the complex source rupture history of the Kemin earthquake, which involved several fault segments with different strike orientations, dipping angles and focal mechanisms (e.g. Delvaux et al. in Russ Geol Geophys 42:1167–1177, 2001; Arrowsmith et al. in Eos Trans Am Geophys Union 86(52), 2005). Two possible locations for the intensity centre are obtained. The first is located on the easternmost sub-faults (i.e. the Aksu and Chon-Aksu segments), where most of the seismic moment was released (Arrowsmith et al. in Eos Trans Am Geophys Union 86(52), 2005). The second location is located on the westernmost sub-faults (i.e. the Dzhil'-Aryk segment), close to the intensity centre location obtained for the 1938, M 6.9 Chu-Kemin earthquake (MILH?=?6.9 and MIW?=?6.8).  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号