首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
In the nappe zone of the Sardinian Variscan chain, the deformation and metamorphic grade increase throughout the tectonic nappe stack from lower greenschist to upper amphibolite facies conditions in the deepest nappe, the Monte Grighini Unit. A synthesis of petrological, structural and radiometric data is presented that allows us to constrain the thermal and mechanical evolution of this unit. Carboniferous subduction under a low geothermal gradient (~490–570 °C GPa?1) was followed by exhumation accompanied by heating and Late Carboniferous magma emplacement at a high apparent geothermal gradient (~1200–1450 °C GPa?1). Exhumation coeval with nappe stacking was closely followed by activity on a ductile strike‐slip shear zone that accommodated magma intrusion and enabled the final exhumation of the Monte Grighini Unit to upper crustal levels. The reconstructed thermo‐mechanical evolution allows a more complete understanding of the Variscan orogenic wedge in central Sardinia. As a result we are able to confirm a diachronous evolution of metamorphic and tectonic events from the inner axial zone to the outer nappe zone, with the Late Variscan low‐P/high‐T metamorphism and crustal anatexis as a common feature across the Sardinian portion of the Variscan orogen.  相似文献   

2.
The Gosainkund–Helambu region in central Nepal occupies a key area for the development of Himalayan kinematic models, connecting the well‐investigated Langtang area to the north with the Kathmandu Nappe (KN), whose interpretation is still debated, to the south. In order to understand the structural and metamorphic architecture of the Greater Himalayan Sequence (GHS) in this region, a detailed petrological study was performed, focusing on selected metapelite samples from both the Gosainkund–Helambu and Langtang transects. The structurally lowest sample investigated belongs to the Lesser Himalayan Sequence; its metamorphic evolution is characterized by a narrow hairpin P–T path with peak P–T conditions of 595 ± 25 °C, 7.5 ± 1 kbar. All of the other samples here investigated belong to the GHS. Along the Langtang section, two tectono‐metamorphic units have been distinguished within the GHS: the Lower Greater Himalayan Sequence (L‐GHS), characterized by peak P–T conditions at 728 ± 11 °C, 10 ± 0.5 kbar (corresponding to a T/depth ratio of 22 ± 1 °C km?1), and the structurally higher Upper Greater Himalayan Sequence, with peak metamorphic conditions at 780 ± 20 °C, 7.8 ± 0.8 kbar (corresponding to a T/depth ratio of 31 ± 4 °C km?1). This confirms the existence of a main tectono‐metamorphic discontinuity within the GHS, as previously suggested by other authors. The results of petrological modelling of the metapelites from the Gosainkund–Helambu section show that this region is entirely comprised within a sub‐horizontal and thin L‐GHS unit: the estimated peak metamorphic conditions of 734 ± 19 °C, 10 ± 0.8 kbar correspond to a uniform T/depth ratio of 23 ± 3 °C km?1. The metamorphic discontinuity identified along the Langtang transect and dividing the GHS in two tectono‐metamorphic units is located at a structural level too high to be intersected along the Gosainkund–Helambu section. Our results have significant implications for the interpretation of the KN and provide a contribution to the more general discussion of the Himalayan kinematic models. We demonstrate that the structurally lower unit of the KN (known as Sheopuri Gneiss) can be correlated with the L‐GHS unit; this result strongly supports those models that correlate the KN to the Tethyan Sedimentary Sequence and that suggest the merging of the South Tibetan Detachment System and the Main Central Thrust on the northern side of the KN. Moreover we speculate that, in this sector of the Himalayan chain, the most appropriate kinematic model able to explain the observed tectono‐metamorphic architecture of the GHS is the duplexing model, or hybrid models which combine the duplexing model with another end‐member model.  相似文献   

3.
Raman microspectroscopy on carbonaceous material (RSCM) from the eastern Tauern Window indicates contrasting peak‐temperature patterns in three different fabric domains, each of which underwent a poly‐metamorphic orogenic evolution: Domain 1 in the northeastern Tauern Window preserves oceanic units (Glockner Nappe System, Matrei Zone) that attained peak temperatures (Tp) of 350–480 °C following Late Cretaceous to Palaeogene nappe stacking in an accretionary wedge. Domain 2 in the central Tauern Window experienced Tp of 500–535 °C that was attained either within an exhumed Palaeogene subduction channel or during Oligocene Barrovian‐type thermal overprinting within the Alpine collisional orogen. Domain 3 in the Eastern Tauern Subdome has a peak‐temperature pattern that resulted from Eo‐Oligocene nappe stacking of continental units derived from the distal European margin. This pattern acquired its presently concentric pattern in Miocene time due to post‐nappe doming and extensional shearing along the Katschberg Shear Zone System (KSZS). Tp values in the largest (Hochalm) dome range from 612 °C in its core to 440 °C at its rim. The maximum peak‐temperature gradient (≤70 °C km?1) occurs along the eastern margin of this dome where mylonitic shearing of the Katschberg Normal Fault (KNF) significantly thinned the Subpenninic‐ and Penninic nappe pile, including the pre‐existing peak‐temperature gradient.  相似文献   

4.
In a Barrovian metamorphic sequence, garnetiferous mica schists document a heterogeneously developed superposition of sub‐orthogonal fabrics and multiple garnet growth episodes. In the variably deformed domains, four types of garnet porphyroblasts have been defined based on inclusion trail patterns. Modelled garnet zoning in the MnNCKFMASHTO system indicates a prograde evolution from 4–4.5 kbar and 490–510 °C to 5–6 kbar and 520–550 °C in the earliest subhorizontal fabric progressing towards 6.5–7.5 kbar and 560–590 °C in the subsequent subvertical foliation. This fabric is heterogeneously deformed into a shallow‐dipping retrograde foliation associated with garnet resorption. In situ electron backscatter diffraction measurements of ilmenite inclusions in individual garnet grains yield precise data on included planar and linear elements. Consistent orientations of internal foliations, lineations and foliation intersection axis sets indicate a superposition of three sub‐orthogonal foliation systems. Weak variations of internal records with increasing intensity of deformation suggest that a moderate buckling stage occurred, but apparent lack of porphyroblast rotation is interpreted as a result of dominant passive flow. Coupling the orientation of internal fabric sets with P–T estimates is used to complement the tectono‐metamorphic evolution of the thickened crust. We demonstrate that garnet porphyroblasts preserve features which reflect large‐scale tectonic processes in orogens.  相似文献   

5.
New petrological and geochronological data are presented on high‐grade ortho‐ and paragneisses from northwestern Ghana, forming part of the Paleoproterozoic (2.25–2.00 Ga) West African Craton. The study area is located in the interference zone between N–S and NE–SW‐trending craton‐scale shear zones, formed during the Eburnean orogeny (2.15–2.00 Ga). High‐grade metamorphic domains are separated from low‐grade greenstone belts by high‐strain zones, including early thrusts, extensional detachments and late‐stage strike‐slip shear zones. Paragneisses sporadically preserve high‐pressure, low‐temperature (HP–LT) relicts, formed at the transition between the blueschist facies and the epidote–amphibolite sub‐facies (10.0–14.0 kbar, 520–600 °C), and represent a low (~15 °C km?1) apparent geothermal gradient. Migmatites record metamorphic conditions at the amphibolite–granulite facies transition. They reveal a clockwise pressure–temperature–time (P–T–t) path characterized by melting at pressures over 10.0 kbar, followed by decompression and heating to peak temperatures of 750 °C at 5.0–8.0 kbar, which fit a 30 °C km?1 apparent geotherm. A regional amphibolite facies metamorphic overprint is recorded by rocks that followed a clockwise P–T–t path, characterized by peak metamorphic conditions of 7.0–10.0 kbar at 550–680 °C, which match a 20–25 °C km?1 apparent geotherm. These P–T conditions were reached after prograde burial and heating for some rock units, and after decompression and heating for others. The timing of anatexis and of the amphibolite facies metamorphic overprint is constrained by in‐situ U–Pb dating of monazite crystallization at 2138 ± 7 and 2130 ± 7 Ma respectively. The new data set challenges the interpretation that metamorphic breaks in the West African Craton are due to diachronous Birimian ‘basins’ overlying a gneissic basement. It suggests that the lower crust was exhumed along reverse, normal and transcurrent shear zones and juxtaposed against shallow crustal slices during the Eburnean orogeny. The craton in NW Ghana is made of distinct fragments with contrasting tectono‐metamorphic histories. The range of metamorphic conditions and the sharp lateral metamorphic gradients are inconsistent with ‘hot orogeny’ models proposed for many Precambrian provinces. These findings shed new light on the geodynamic setting of craton assembly and stabilization in the Paleoproterozoic. It is suggested that the metamorphic record of the West African Craton is characteristic of Paleoproterozoic plate tectonics and illustrates a transition between Archean and Phanerozoic orogens.  相似文献   

6.
The Araçuaí orogen is the Brazilian counterpart of the Araçuaí‐West Congo orogenic system (AWCO), a component of the Ediacaran‐Cambrian orogenic network formed during the amalgamation of West Gondwana. The northwestern portion of the Araçuaí orogen is dominated by a succession of metasedimentary rocks made up of Meso‐ to Neoproterozoic rift, passive margin and syn‐orogenic sequences, locally intruded by post‐collisional granites. These sequences are involved in three distinct tectonic units, which from west to east are: the southern Espinhaço fold‐thrust system (SE‐thrust system), the normal‐sense Chapada Acauã shear zone (CASZ) and the Salinas synclinorium. Three deformation phases were documented in the region. The first two phases (D1 and D2) are characterized by contractional structures and represent the collisional development stage of the orogen. The third phase (D3) is extensional and currently viewed as a manifestation of orogenic collapse of the system. The distribution of the metamorphic mineral assemblages in the region characterizes two metamorphic domains. The M‐Domain I on the west, encompassing the SE‐thrust system and the CASZ, is marked by a syn‐collisional (syn‐D1) Barrovian‐type metamorphism with P–T conditions increasing eastwards and reaching ~8.5 kbar at ~650°C between 575 and 565 Ma. The M‐Domain II comprises the Salinas synclinorium in the hangingwall of the CASZ, and besides the greenschist facies syn‐collisional metamorphism, records mainly a Buchan‐type metamorphic event, which took place under 3–5.5 kbar and up to 640°C at c. 530 Ma. The northwestern Araçuaí orogen exhibits, thus, a paired metamorphic pattern, in which the Barrovian and Buchan‐type metamorphic domains are juxtaposed by a normal‐sense shear zone. Lithospheric thinning during the extensional collapse of the orogen promoted ascent of the geotherms and melt generation. A large volume of granites was emplaced in the high grade and anatectic core of the orogen during this stage, and heat advected from these intrusions caused the development of Buchan facies series over a relatively large area. Renewed granite plutonism, hydrothermal activities followed by progressive cooling affected the system between 530 and 490 Ma.  相似文献   

7.
Strain localization within shear zones may partially erase the rock fabric and the metamorphic assemblage(s) that had developed before the mylonitic event. In poly‐deformed basements, the loss of information on pre‐kinematic phases of mylonites hinders large‐scale correlations based on tectono‐metamorphic data. In this study, devoted to a relict unit of Variscan basement reworked within the nappe stack of the Northern Apennines (Italy), we investigate the possibility to reconstruct a complete pressure (P)–temperature (T)–deformation (D) path of mylonitic micaschist and amphibolite by integrating microstructural analysis, mineral chemistry and thermodynamic modelling. The micaschist is characterized by a mylonitic fabric with fine‐grained K‐white mica and chlorite enveloping mica‐fishes, quartz, and garnet pseudomorphs. Potassic white mica shows Mg‐rich cores and Mg‐poor rims. The amphibolite contains green amphibole+plagioclase+garnet+quartz+ilmenite defining S1 with a superposed mylonitic fabric localized in decimetre‐ to centimetre‐scale shear zones. Garnet is surrounded by an amphibole+plagioclase corona. Phase diagram calculations provide P–T constraints that are linked to the reconstructed metamorphic‐deformational stages. For the first time an early high‐P stage at >11 kbar and 510°C was constrained, followed by a temperature peak at 550–590°C and 9–10 kbar and a retrograde stage (<475°C, <7 kbar), during which ductile shear zones developed. The inferred clockwise P–T–D path was most likely related to crustal thickening by continent‐continent collision during the Variscan orogeny. A comparison of this P–T–D path with those of other Variscan basement occurrences in the Northern Apennines revealed significant differences. Conversely, a correlation between the tectono‐metamorphic evolution of the Variscan basement at Cerreto pass, NE Sardinia and Ligurian Alps was established.  相似文献   

8.
The exhumation history and tectonic evolution of the Qilian Shan at the north‐eastern margin of the Tibetan Plateau has been widely debated. Here, we present apatite fission‐track (AFT) data for 12 Ordovician granodiorite samples along a vertical transect in the eastern Qilian Shan. These thermochronometry data indicate that the eastern Qilian Shan experienced a three‐stage cooling history, including: (i) rapid initial cooling in the late Cretaceous; (ii) a stage of quasi isothermal quiescence from ~ 80 to 24 Ma; and (iii) rapid subsequent cooling beginning in the early Miocene. The inferred cooling rates for the three stages are 6.8 ± 4.9 °C Ma?1, 0.6 ± 0.2 °C Ma?1 and 2.7 ± 0.9 °C Ma?1 respectively (±1 σ). Assuming a geothermal gradient of 25 °C km?1, the exhumation rates for the three stages are 0.27 ± 0.20 mm a?1, 0.017 ± 0.007 mm a?1 and 0.11 ± 0.04 mm a?1 respectively (±1 σ). We suggest that the late Cretaceous cooling records collision of the Lhasa block with the Eurasian continent and that the Miocene cooling represents uplift/exhumation of the Qilian Shan.  相似文献   

9.
In situ LA–ICP–MS U–Pb monazite geochronology from the Boothby Hills in the Aileron Province, central Australia, indicates that the region records more than 80 Ma of high‐T, low‐P (HTLP) anatectic conditions during the Early Mesoproterozoic. Monazite ages from granulite facies rocks and leucosomes span the interval 1576–1542 Ma. Pegmatites that overprint the regional gneissic fabric and are interpreted to record the last vestiges of melt crystallization give ages between 1523 and 1513 Ma. Calculated P–T pseudosections suggest peak metamorphic conditions in excess of 850 °C at 0.65–0.75 GPa. The retrograde evolution was characterized by a P–T path that involved minor decompression and then cooling, culminating with the development of andalusite. Integration of the geochronological data set with the inferred P–T path trajectory suggests that suprasolidus cooling must have been slow, in the order of 2.5–4 °C Ma?1. In addition, the retrograde P–T path trajectory suggests that HTLP conditions were generated within crust of relatively normal thickness. Despite the long duration over which anatectic conditions occurred, there is no evidence for external magmatic inputs or evidence that HTLP conditions were associated with long‐lived extension. Instead, it seems probable that the long‐lived HTLP metamorphism was driven to a significant extent by long‐lived conductive heating provided by high crustal heat production in voluminous pre‐metamorphic granitic rocks.  相似文献   

10.
The Chandman massif, a typical structure of the Mongolian Altai, consists of a migmatite–magmatite core rimmed by a lower grade metamorphic envelope of andalusite and cordierite‐bearing schists. The oldest structure in the migmatite–magmatite core is a subhorizontal migmatitic foliation S1 parallel to rare granitoid sills. This fabric is folded by upright folds F2 and transposed into a vertical migmatitic foliation S2 that is syn‐tectonic, with up to several tens of metres thick granitoid sills. Sillimanite–ilmenite–magnetite S1 inclusion trails in garnet constrain the depth of equilibration during the S1 fabric to 6–7 kbar at 710–780 °C. Reorientation of sillimanite into the S2 fabric indicates that the S1–S2 fabric transition occurred in the sillimanite stability field. The presence of cordierite, and garnet rim chemistry point to decompression to 3–4 kbar and 680–750 °C during development of the S2 steep fabric, and post‐tectonic andalusite indicates further decompression to 2–3 kbar and 600–650 °C. Widespread crystallization of post‐tectonic muscovite is explained by the release of H2O from crystallizing partial melt. In the metamorphic envelope the subhorizontal metamorphic schistosity S1 is heterogeneously affected by upright F2 folds and axial planar subvertical cleavage S2. In the north, the inclusion trails in garnet are parallel to the S1 foliation, and the garnet zoning indicates nearly isobaric heating from 2.5 to 3 kbar and 500–530 °C. Cordierite contains crenulated S1 inclusion trails and has pressure shadows related to the formation of the S2 fabric. The switch from the S1 to the S2 foliation occurred near 2.5–3 kbar and 530–570 °C; replacement of cordierite by fine‐grained muscovite and chlorite indicates further retrogression and cooling. In the south, andalusite containing crenulated inclusion trails of ilmenite and magnetite indicates heating during the D2 deformation at 3–4 kbar and 540–620 °C. Monazite from a migmatite analysed by LASS yielded elevated HREE concentrations. The grain with the best‐developed oscillatory zoning is 356 ± 1.0 [±7] Ma (207Pb‐corrected 238U/206Pb), considered to date the crystallization from melt in the cordierite stability ~680 °C and 3.5 kbar, whereas the patchy BSE‐dark domains give a date of 347 ± 4.2 [±7] Ma interpreted as recrystallization at subsolidus conditions. The earliest sub‐horizontal fabric is associated with the onset of magmatism and peak of P–T conditions in the deep crust, indicating important heat input associated with lower crustal horizontal flow. The paroxysmal metamorphic conditions are connected with collapse of the metamorphic structure, an extrusion of the hot lower crustal rocks associated with vertical magma transfer and a juxtaposition of the hot magmatite–migmatite core with supracrustal rocks. This study provides information about tectono‐thermal history and time‐scales of horizontal flow and vertical mass and heat transfer in the Altai orogen. It is shown that, similar to collisional orogens, doming of partially molten rocks assisted by syn‐orogenic magmatism can be responsible for the exhumation of orogenic lower crust in accretionary orogenic systems.  相似文献   

11.
A numerical modelling approach is used to validate the physical and geological reliability of the ablative subduction mechanism during Alpine convergence in order to interpret the tectonic and metamorphic evolution of an inner portion of the Alpine belt: the Austroalpine Domain. The model predictions and the natural data for the Austroalpine of the Western Alps agree very well in terms of P–T peak conditions, relative chronology of peak and exhumation events, P–T–t paths, thermal gradients and the tectonic evolution of the continental rocks. These findings suggest that a pre‐collisional evolution of this domain, with the burial of the continental rocks (induced by ablative subduction of the overriding Adria plate) and their exhumation (driven by an upwelling flow generated in a hydrated mantle wedge) could be a valid mechanism that reproduces the actual tectono‐metamorphic configuration of this part of the Alps. There is less agreement between the model predictions and the natural data for the Austroalpine of the Central‐Eastern Alps. Based on the natural data available in the literature, a critical discussion of the other proposed mechanisms is presented, and additional geological factors that should be considered within the numerical model are suggested to improve the fitting to the numerical results; these factors include variations in the continental and/or oceanic thickness, variation of the subduction rate and/or slab dip, the initial thermal state of the passive margin, the occurrence of continental collision and an oblique convergence.  相似文献   

12.
Thermodynamic modelling of metamorphic rocks increases the possibilities of deciphering prograde paths that provide important insights into early orogenic evolution. It is shown that the chloritoid–staurolite transition is not only an indicator of temperature on prograde P–T paths, but also a useful indicator of pressure. The approach is applied to the Moravo‐Silesian eastern external belt of the Bohemian Massif, where metamorphic zones range from biotite to staurolite‐sillimanite. In the staurolite zone, inclusions of chloritoid occur in garnet cores, while staurolite is included at garnet rims and is widespread in the matrix. Chloritoid XFe = 0.91 indicates transition to staurolite at 5 kbar and 550 °C and consequently, an early transient prograde geothermal gradient of 29 °C km?1. The overall elevated thermal evolution is then reflected in the prograde transition of staurolite to sillimanite and in the achievement of peak temperature of 660 °C at a relatively low pressure of 6.5 kbar. To the south and to the west of the studied area, high‐grade metamorphic zones record a prograde path evolution from staurolite to kyanite and development of sillimanite on decompression. Transition of chloritoid to staurolite was reported in two places, with chloritoid XFe = 0.75–0.80, occurring at 8–10 kbar and 560–580 °C, and indicating a transient prograde geothermal gradient of 16–18 °C km?1. These data show variable barric evolutions along strike and across the Moravo‐Silesian domain. Elevated prograde geothermal gradient coincides with areas of Devonian sedimentation and volcanism, and syn‐ to late Carboniferous intrusions. Therefore, we interpret it as a result of heat inherited from Devonian rifting, further fuelled by syntectonic Carboniferous intrusions.  相似文献   

13.
High-pressure (HP) granulites form either in the domain of the subducted plate during continental collision or in supra-subduction systems where the thermally softened upper plate is shortened and thickened. Such a discrepancy in tectonic setting can be evaluated by metamorphic pressure–temperature–time-deformation (P–T–t–D) paths. In the current study, P–T–t–D paths of Early Palaeozoic HP granulite facies rocks, in the form of metabasic lenses enclosed in migmatitic metapelite, from the Dunhuang block, NW China, are investigated in order to constrain the nature of the HP rocks and shed light on the geodynamic evolution of a modern hot orogenic system in an active margin setting. The rocks show a polyphase evolution characterized by (1) relics of horizontal or gently dipping fabric (S1) preserved in cores of granulite lenses and in garnet porphyroblasts, (2) a N-S trending sub-vertical fabric (S2) preserved in low-strain domains and (3) upright folds (F3) associated with a ubiquitous steep E-W striking axial planar foliation (S3). Garnet in the granulites preserves relics of a prograde mineral assemblage M1a equilibrated at ~11.5 kbar and ~770–780°C, whereas the matrix granulite assemblage (M1b) from the S1 fabric attained peak pressure at ~13.5 kbar and ~850°C. The granulites were overprinted at ~8–11 kbar and ~850–900°C during crustal melting (M2) followed by partial re-equilibration (M3) at ~8 kbar and ~625°C. A garnet Lu–Hf age of 421.6 ± 1.2 Ma dates metamorphism M1, while a garnet Sm–Nd age of 385.3 ± 4.0 Ma reflects M3 cooling of the granulites. The mineral assemblage, M1, of the host migmatitic metapelite formed at ~9–12.5 kbar and ~760–810°C, partial melting and migmatization (M2) occurred at ~7 kbar and ~760°C and re-equilibration (M3) at ~5–6 kbar and ~675°C. A garnet Lu–Hf age of 409.7 ± 2.3 Ma dates thermal climax (M2) and a garnet Sm–Nd age of 356 ± 11 Ma constrains M3 for the migmatitic metapelites. The timing of this late phase is also bracketed by an emplacement age of syntectonic granite dated at c. 360 Ma. Decoupling of M1 and M2 P–T evolutions between the mafic granulites and migmatitic metapelites indicates their different positions in the crustal column, while the shared pressure–temperature (P–T) evolution M3 suggests formation of a mélange-like association during the late stages of orogeny. The high-pressure event D1-M1 is interpreted as a result of Late Silurian–Early Devonian moderate crustal thickening of a thermally softened and thinned pre-orogenic crust. The high-temperature (HT) re-equilibration D2-M2 is interpreted as a result of Mid-Devonian shortening of the previously thickened crust, possibly due to ‘Andean-type’ underthrusting. The D3-M3 event reflects Late Devonian supra-subduction shortening and continuous erosion of the sub-crustal lithosphere. This tectono-metamorphic sequence of events is explained by polyphased Andean-type deformation of a ‘Cascadia-type’ active margin, which corresponds to a supra-subduction tectonic switching paradigm.  相似文献   

14.
Garnet crystallization in metapelites from the Barrovian garnet and staurolite zones of the Lesser Himalayan Belt in Sikkim is modelled utilizing Gibbs free energy minimization, multi‐component diffusion theory and a simple nucleation and growth algorithm. The predicted mineral assemblages and garnet‐growth zoning match observations remarkably well for relatively tight, clockwise metamorphic P–T paths that are characterized by prograde gradients of ～30 °C kbar?1 for garnet‐zone rocks and ～20 °C kbar?1 for rocks from the staurolite zone. Estimates for peak metamorphic temperature increase up‐structure toward the Main Central Thrust. According to our calculations, garnet stopped growing at peak pressures, and protracted heating after peak pressure was absent or insignificant. Almost identical P–T paths for the samples studied and the metamorphic continuity of the Lesser Himalayan Belt support thermo‐mechanical models that favour tectonic inversion of a coherent package of Barrovian metamorphic rocks. Time‐scales associated with the metamorphism were too short for chemical diffusion to substantially modify garnet‐growth zoning in rocks from the garnet and staurolite zones. In general, the pressure of initial garnet growth decreases, and the temperature required for initial garnet growth was reached earlier, for rocks buried closer toward the MCT. Deviations from this overall trend can be explained by variations in bulk‐rock chemistry.  相似文献   

15.
The Gangdese magmatic arc, southeastern Tibet, was built by mantle‐derived magma accretion and juvenile crustal growth during the Mesozoic to Early Cenozoic northward subduction of the Neo‐Tethyan oceanic slab beneath the Eurasian continent. The petrological and geochronological data reveal that the lower crust of the southeastern Gangdese arc experienced Oligocene reworking by metamorphism, anatexis and magmatism after the India and Asia collision. The post‐collisional metamorphic and migmatitic rocks formed at 34–26 Ma and 28–26 Ma respectively. Meta‐granitoids have protolith ages of 65–38 Ma. Inherited detrital zircon from metasedimentary rocks has highly variable ages ranging from 2708 to 37 Ma. These rocks underwent post‐collisional amphibolite facies metamorphism and coeval anatexis under P–T conditions of ~710–760 °C and ~12 kbar with geothermal gradients of 18–20 °C km ? 1, indicating a distinct crustal thickening process. Crustal shortening, thickening and possible subduction erosion due to the continental collision and ongoing convergence resulted in high‐P metamorphic and anatectic reworking of the magmatic and sedimentary rocks of the deep Gangdese arc. This study provides a typical example of the reworking of juvenile and ancient continental crust during active collisional orogeny.  相似文献   

16.
The Variscan metamorphism in the Pyrenees is dominantly of the low‐pressure–high‐temperature (LP‐HT) type. The relics of an earlier, Barrovian‐type metamorphism that could be related to orogenic crustal thickening are unclear and insufficiently constrained. A microstructural and petrological study of micaschists underlying an Ordovician augen orthogneiss in the core of the Canigou massif (Eastern Pyrenees, France) reveals the presence of two syntectonic metamorphic stages characterized by the crystallization of staurolite (M1) and andalusite (M2), respectively. Garnet is stable during the two metamorphic stages with a period of resorption between M1 and M2. The metamorphic assemblages M1 and M2 record similar peak temperatures of 580°C at different pressure conditions of 5.5 and 3 kbar, respectively. Using chemical zoning of garnet and calculated P–T pseudosections, a prograde P–T path is constrained with a peak pressure at ~6.5 kbar and 550°C. This P–T path, syntectonic with respect to the first foliation S1, corresponds to a cold gradient (of ~9°C/km), suggestive of crustal thickening. Resorption of garnet between M1 and M2 can be interpreted either in terms of a simple clockwise P–T path or a polymetamorphic two‐stage evolution. We argue in favour of the latter, where the medium‐pressure (Barrovian) metamorphism is followed by a period of significant erosion and crustal thinning leading to decompression and cooling. Subsequent advection of heat, probably from the mantle, leads to a new increase in temperature, coeval with the development of the main regional fabric S2. LA‐ICP‐MS U–Th–Pb dating of monazite yields a well‐defined date at c. 300 Ma. Petrological evidence indicates that monazite crystallization took place close to the M1 peak pressure conditions. However, the similarity between this age and that of the extensive magmatic event well documented in the eastern Pyrenees suggests that it probably corresponds to the age of monazite recrystallization during the M2 LP‐HT event.  相似文献   

17.
The Montagne Noire in the southernmost French Massif Central is made of an ENE‐elongated gneiss dome flanked by Palaeozoic sedimentary rocks. The tectonic evolution of the gneiss dome has generated controversy for more than half a century. As a result, a multitude of models have been proposed that invoke various tectonic regimes and exhumation mechanisms. Most of these models are based on data from the gneiss dome itself. Here, new constraints on the dome evolution are provided based on a combination of very low‐grade petrology, K–Ar geochronology, field mapping and structural analysis of the Palaeozoic western Mont Peyroux and Faugères units, which constitute part of the southern hangingwall of the dome. It is shown that southward‐directed Variscan nappe‐thrusting (D1) and a related medium‐P metamorphism (M1) are only preserved in the area furthest away from the gneiss dome. The regionally dominant pervasive tectono‐metamorphic event D2/M2 largely transposes D1 structures, comprises a higher metamorphic thermal gradient than M1 (transition low‐P and medium‐P metamorphic facies series) and affected the rocks between c. 309 and 300 Ma, post‐dating D1/M1 by more than 20 Ma. D2‐related fabrics are refolded by D3, which in its turn, is followed by dextral‐normal shearing along the basal shear zone of both units at c. 297 Ma. In the western Mont Peyroux and Faugères units, D2/M2 is largely synchronous with shearing along the southern dome margin between c. 311 and 303 Ma, facilitating the emplacement of the gneiss dome into the upper crust. D2/M2 also overlaps in time with granitic magmatism and migmatization in the Zone Axiale between c. 314 and 306 Ma, and a related low‐P/high‐T metamorphism at c. 308 Ma. The shearing that accompanied the exhumation of the dome therefore was synchronous with a peak in temperature expressed by migmatization and intrusion of melts within the dome, and also with the peak of metamorphism in the hangingwall. Both, the intensity of D2 fabrics and the M2 metamorphic grade within the hangingwall, decrease away from the gneiss dome, with grades ranging from the anchizone–epizone boundary to the diagenetic zone. The related zonation of the pre‐D3 metamorphic field gradients paralleled the dome. These observations indicate that D2/M2 is controlled by the exhumation of the Zone Axiale, and suggest a coherent kinematic between the different crustal levels at some time during D2/M2. Based on integration of these findings with regional geological constraints, a two‐stage exhumation of the gneiss dome is proposed: during a first stage between c. 316 and 300 Ma dome emplacement into the upper crust was controlled by dextral shear zones arranged in a pull‐apart‐like geometry. The second stage from 300 Ma onwards was characterized by northeast to northward extension, with exhumation accommodated by north‐dipping detachments and hangingwall basin formation along the northeastern dome margin.  相似文献   

18.
粤西-桂东四套成矿系统地质特征、成因类型及构造启示   总被引：1，自引：0，他引：1  
郑义  余盼  王岳军  林振文 《岩石学报》2017,33(3):682-694
粤西-桂东地区是我国重要的矿产资源基地,是研究区域成矿作用和大地构造演化耦合关系的理想地区。本文基于粤西-桂东地区四套主要成矿系统的地质特征的研究,结合区域内矿床精确定年和构造演化的研究成果,探讨四套主要成矿系统的成因类型、成矿构造背景及其对钦杭结合带构造演化的启示。其中,广东云浮硫铁矿产于震旦系大绀山组,块状和条带状矿石呈层状产于火山沉积岩系中,是一套与海底热液活动密切相关的VMS成矿系统,形成于新元古代俯冲相关的弧后(间)拉张盆地;盘龙铅锌矿产于泥盆系上伦组,角砾状和胶状矿石产于浅海相白云质碎屑岩中,是一套加里东期被动大陆边缘的SEDEX型铅锌成矿系统;河台金矿田赋存于震旦系乐昌组,脉状矿体严格受断裂和蚀变带控制,是一套变质热液主导的造山型金矿成矿系统,形成于印支-燕山期陆内走滑或陆陆碰撞背景;圆珠顶铜钼矿床形成与燕山期(155Ma)二长花岗斑岩密切相关,细脉浸染状矿石赋存于岩体的内外接触带,是一套陆内伸展背景的斑岩铜钼成矿系统。总体而言,粤西-桂东地区经历了新元古代俯冲、加里东期被动大陆边缘、印支期陆内走滑(或陆陆碰撞)和燕山期陆内伸展四个重要的构造事件,这与钦杭结合带总体构造演化过程一致。  相似文献   

19.
云南哀牢山地区构造岩石地层单元及其构造演化   总被引：28，自引：5，他引：28  
依据新获得的同位素年代学资料和构造岩石地层单元,重新认识了云南哀牢山造山带形成与演化历史。认为:在哀牢山地区元古界深变质岩系属基底构造层;前造山期岩石组合及构造演化为扬子地块西缘被动大陆边缘志留纪深水相碎屑岩→陆缘泥盆纪被动裂谷盆地中火山-沉积岩→石炭纪哀牢山有限洋盆及蛇绿岩石组合→晚二叠世-早三叠世哀牢山洋-陆碰撞成陆及弧火山岩-陆相碎屑岩组合。燕山期主造山期及岩石组合为晚三叠世-侏罗纪前陆盆地磨拉石建造-同造山期中酸性侵入岩-燕山期脆韧性剪切带及构造岩。喜马拉雅山期陆内造山成原的岩石组合为第三-第四纪陆内山间盆地中磨拉石建造-红河韧性剪切带及构造岩-富碱侵入岩和煌斑岩。  相似文献   

20.
The Teplá–Barrandian unit (TBU) has long been considered as a simply bivergent supracrustal ‘median massif’ above the Saxothuringian subduction zone in the Variscan orogenic belt. This contribution reveals a much more complex style of the Variscan tectonometamorphic overprint and resulting architecture of the Neoproterozoic basement of the TBU. For the first time, we describe the crustal-scale NE–SW-trending dextral transpressional Krakovec shear zone (KSZ) that intersects the TBU and thrusts its higher grade northwestern portion severely reworked by Variscan deformation over a southeastern very low grade portion with well-preserved Cadomian structures and only brittle Variscan deformation. The age of movements along the KSZ is inferred as Late Devonian (~380–370?Ma). On the basis of structural, microstructural, and anisotropy of magnetic susceptibility data from the KSZ, we propose a new synthetic model for the deformation partitioning in the Teplá–Barrandian upper crust in response to the Late Devonian to early Carboniferous subduction and underthrusting of the Saxothuringan lithosphere. We conclude that the Saxothuringian/Teplá–Barrandian convergence was nearly frontal during ~380–346?Ma and was partitioned into pure shear dominated domains that accommodated orogen-perpendicular shortening alternating with orogen-parallel high-strain domains that accommodated dextral transpression or bilateral extrusion. The synconvergent shortening of the TBU was terminated by a rapid gravity-driven collapse of the thickened lithosphere at ~346–337?Ma followed by, or partly simultaneous with, dextral strike-slip along the Baltica margin-parallel zones, driven by the westward movement of Gondwana from approximately 345?Ma onwards.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号