首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Luminescence dating of late Quaternary sediments in Peru is challenging, especially on the Peruvian coast. Earlier studies have shown that quartz grains often exhibit a thermally unstable, medium signal that caused the underestimation of Optically Stimulated Luminescence (OSL) ages. InfraRed Stimulated Luminescence (IRSL) dating has shown to produce more reliable ages, depending, amongst other factors, on the age model (Central or Minimum Age Model), and the IRSL signal. IRSL dating of geoarchaeological sediments has, however, hardly been carried out, let along validated, against an independent age dataset. This dating approach is, nonetheless, the only promising way to date the geological substrate in which many of Peru's archaeological sites are buried. Peru contains some of the oldest and most important archaeological heritage sites, yet not much is known of the environmental context in which many of its early civilizations prospered. A better understanding of which luminescence method works best could therefore help in a better understanding of the geological-stratigraphical context of many of Peru's sites.To investigate this matter more fully, we compared the luminescence dating results of seven sediment samples from the top layer of the Lima alluvial fan and from geoarchaeological layers of the Maranga Complex (San Miguel, Lima), with an independent dataset of sixteen 14C ages. Our results showed that the quartz OSL ages always underestimated the expected ages due to a signal dominated by medium and slow components, and that the post-IR IRSL225 (pIR IRSL225) and IRSL50 ages of K-feldspars, on basis of the Central Age Model (CAM), always overestimated the expected ages. The Minimum Age Model (MAM) on the other hand, correctly predicted the expected ages for the early Holocene, Lima alluvial fan sediments using the pIR IRSL225 signal of K-feldspars, and the late Holocene, geoarchaeological ages using the IRSL50 signal.  相似文献   

2.
Cobbles can be used as an alternative to the conventionally employed sand-sized mineral luminescence dating. In piedmont environments, cobbles are much more abundant than sand-sized material. The IRSL50 signal has been widely used in previous studies due to its greater sensitivity to exposure events. However, it is well known that the low temperature IRSL signal is more prone to fade than elevated temperature post-IR IRSL signal. In this study, to test the reliability and applicability of cobble sub-surface elevated temperature IRSL luminescence dating, six light-color granite cobbles and two sand-sized samples from silty sand lens were collected from a high terrace of Manas River on the northern piedmont of Chinese Tian Shan. A modified multi-elevated-temperature post-infrared infrared stimulated luminescence (MET-post-IR IRSL) protocol was applied. The age-temperature (A-T) plateau of MET-post-IR IRSL measurement was combined with the conventional age-depth (A-D) plateau in luminescence-depth profile to evaluate the resetting and fading of MET-post-IR IRSL signals. Uncertainties of grain-sizes of K-feldspar within solidified slices were also explored by μ-XRF mapping of potassium content. The A-T plateau was identified between MET-post-IR IRSL170 and MET-post-IR IRSL225 signals of one cobble, which suggested completeness of bleaching before burial and negligible anomalous fading during burial. This cobble yielded MET-post-IR IRSL225 ages of 15.8 ± 2.6 ka and 19.0 ± 3.2 ka for top and bottom side, respectively. These MET-post-IR IRSL225 ages were consistent with independent coarse-grained quartz MAM OSL ages (15.7 ± 3.6 ka and 14.8 ± 2.6 ka) of two sand-sized samples. The MET-post-IR IRSL225 age of 16.0 ± 1.2 ka for the bottom side of another cobble was also consistent with the independent age, even without the A-T plateau. It was inferred to be caused by anomalous fading of MET-post-IR IRSL signals other than that stimulated at 225 °C by refering to the A-D plateau observed. Our results show that MET-post-IR IRSL measurement can be employed to determine the burial ages of cobbles. The A-T plateau, complemented with the A-D plateau, could be used to assess the reliability of burial ages of cobble luminescence dating from the view of bleaching and fading.  相似文献   

3.
A comparative study using quartz optically stimulated luminescence (OSL) and feldspar post-infrared infrared stimulated luminescence (post-IR IRSL) was undertaken on Quaternary fluvial sediments from an unnamed tributary of the Moopetsi River in South Africa. The aim is to assess whether the post-IR IRSL signal can be used to date incompletely bleached sediments. Several post-IR IRSL signals using varying stimulation and preheat temperatures were investigated; of these the post-IR IRSL225 signal was deemed most appropriate for dating because it bleached most rapidly. The feldspar post-IR IRSL225 equivalent dose (De) values from this site are consistently larger than those from quartz OSL, probably due to differences in the bleaching characteristics of the two signals. Additionally, the post-IR IRSL225 De values within a sample showed less variation in precision than the quartz De data, possibly due to greater averaging between grains in the feldspar small aliquots. The agreement between ages based on the OSL and post-IR IRSL225 signals was better for younger samples (<20 ka) than for older ones (>50 ka); the cause of this variation is unclear.  相似文献   

4.
Raised beach sand deposits along the southeastern coast of Norway were dated by optical (OSL) and infrared stimulated luminescence (IRSL) and the quartz and K-feldspar luminescence characteristics were described. Due to the poor quartz luminescence characteristics, only a limited number of samples were suitable for OSL dating. More promising are the K-feldspar extracts, with typical K-feldspar luminescence characteristics and no sign of fading. For equivalent dose (De) determination, sand-size quartz and feldspar extracts were used, applying a single aliquot regenerative (SAR) protocol. Both, OSL and IRSL De estimates show a wide distribution, unexpected for beach deposits. The calculated OSL and IRSL age estimates were generally in good agreement and the correctness of the ages was confirmed by independent age control. Because only a limited number of the quartz samples were suitable for OSL dating, IRSL dating of the K-feldspar represents an alternative to OSL quartz dating.  相似文献   

5.
Dating agricultural artefacts such as field walls and clearance cairns using radiocarbon can be challenging, especially since the association with datable material may be poor. Rock surface burial dating using luminescence offers an alternative. Here we report on the luminescence dating of a medieval circular stone-walled enclosure at Sønnebøe, northern Scania, Sweden, using both buried rocks and sediments. Luminescence burial profiles from IRSL signals measured at 50 °C (IR50) indicated significant prior light exposure in 7 of the 8 samples tested (5 granite, 2 felsic gneiss), in some cases multiple exposure burial cycles were indicated. These rock surfaces had apparently been exposed for sufficient time to allow accurate IRSL ages for the most recent burial event. In contrasts, no useful post-IR IRSL profiles were obtained indicating that this signal was not sufficiently reset to allow accurate determination of the burial dose on any of these rocks. IR50 fading corrections (typically ∼50%) were derived by comparing field saturation with that induced in the laboratory. Quartz extracted from sediments surrounding the rocks gave an average measured to given dose ratio of 1.03 ± 0.01 (n = 90), and these sediment samples were then dated using multigrain aliquots; the corresponding feldspar dose recovery ratio obtained using rock samples was 0.98 ± 0.05 (n = 28). A total of 15 ages were derived; 8 quartz OSL ages from the disturbed coarse grained sediments surrounding the structure, and 7 fading corrected IR50 ages from the surfaces of rocks (2–3 mm chips, ∼1 mm thick) used in the construction of the structure itself. The exposure events preserved by the ring enclosure stones unequivocally show wall building taking place at the site between 800 and 300 years ago.  相似文献   

6.
Infrared-stimulated luminescence (IRSL) dating of feldspars has the potential to date deposits beyond the age range of quartz optical (OSL) dating. Successful application of feldspar IRSL dating is, however, often precluded due to anomalous-fading, the tunnelling of electrons from one defect site to another. In this paper we test procedures proposed for anomalous-fading correction by comparing feldspar IRSL and quartz OSL dating results on a suite of samples from continental deposits from the southeastern Netherlands. We find that even after anomalous-fading correction IRSL ages underestimate the burial age of the deposits and argue that this may be a consequence of a dependency of anomalous fading rate on the dose rate and on the absorbed dose.  相似文献   

7.
Fluvial sediments of the middle Atbara River Valley, eastern Sudan, contain abundant vertebrate fossils and stone tools. Previous work described two sedimentary units, the Butana Bridge Synthem (BBS) and the Khashm El Girba Synthem (KGS), with three divisions each (BBS1-3 and KGS1-3, from bottom to top, respectively). 230Th/U dating on bivalve shells suggested an age of ∼126 and ∼92 ka for the basal KGS2 and basal KGS3, respectively, and mammalian biochronology in combination with magnetostratigraphy suggested an age of late Early to early Middle Pleistocene for the underlying BBS. To establish a detailed chronology of this fluvial sedimentary sequence, we collected 17 luminescence samples from both sides of the Atbara River close to the Butana Bridge. Quartz OSL dating was applied to samples from the upper part of the profile (upper KGS2 and KGS3), but the signal reached saturation within the upper ∼10 m of the sequence. To select a suitable feldspar signal to date older samples beyond the limit of the quartz OSL, a comparison of the quartz OSL, feldspar post-IR IRSL at 225 and 290 °C, and pulsed IRSL signal at 50 °C was conducted for a sample from KGS3. The result showed that only the fading corrected pulsed IRSL yielded an age consistent with the quartz OSL, and the post-IR IRSL signals (both at 225 and 290 °C) overestimated the quartz age significantly. We therefore selected the pulsed IRSL signal to date the older deposits. The luminescence ages indicate that the entire BBS - KGS sequence was deposited between 224 ± 23 ka and <17 ± 1 ka, corresponding to marine isotope stages (MIS) 7–2, significantly revising previous conclusions.  相似文献   

8.
The applicability of the post-IR IRSL single-aliquot regenerative-dose protocol (termed pIRIR protocol) has been tested on K-rich feldspar from recent coastal sediment samples (<500 a) from the southern North Sea coast and southern Baltic Sea coast. The most suitable post-IR IRSL (pIRIR) stimulation temperature is found to be 150 °C by using a preheat temperature of 180 °C. For this pIRIR stimulation temperature, a detectable pIRIR signal is obtained and the residual dose is minimized. Furthermore, anomalous fading is found to be negligible in the pIRIR150 signal for our young samples whereas the fading rates for the conventional IRSL signal measured at 50 °C (IRSL50) is between 5 and 7%/decade. However, the pIRIR150 signal bleaches significantly slower compared to the IRSL50, according to bleaching experiments using daylight, solar simulator and IR diodes, although the residual doses of both signals are similar. The laboratory residual doses in perfectly bleached aliquots are variable from sample to sample and vary between 300 ± 170 and 800 ± 460 mGy for the pIRIR150. The precision of the residual dose determination is generally poor and causes large uncertainties on the residual subtracted ages. The laboratory residual doses alone cannot account for the observed overestimation in our two youngest samples (<70 a), indicating that the feldspar signals in these samples were presumably not fully bleached prior to aeolian or beach deposition. However, even if the age uncertainties are large we obtained pIRIR150 ages in agreement with independent age estimates for the two older samples, which are 70 and 390 years old.  相似文献   

9.
Luminescence dating has long been used for chronological constraints on marine sediments due to the ubiquitous dating materials (quartz and feldspar grains) and its applicability over a relatively long time range. However, one of the main difficulties in luminescence dating on marine sediments is partial bleaching, which causes age overestimations. Especially, partial bleaching is typically difficult to be detected in the fine grain fraction (FG) of marine sediments. The recently developed feldspar post-IR IRSL (pIRIR) protocol can detect non-fading signals and thus avoid feldspar signal instability. In the current study, fine grains were extracted from a gravity core in the northern Sea of Japan, and the aim is to test the feasibility of using different luminescence signals with various bleaching rates to explore the bleaching conditions of fine grain fraction in marine sediments. The results suggest that the quartz OSL signal and polymineral pIRIR signals at stimulation temperatures of 150 °C and 225 °C (pIRIR150 and pIRIR225) of FG were well bleached prior to deposition. The OSL ages were used to establish a chronology for this sedimentary core and the resulting age-depth relationship is self-consistent and comparable with radiocarbon dates. We conclude that different luminescence signals with various bleaching rates can be used to test the bleaching conditions of fine grain fraction in marine sediments; and the luminescence dating can be applied to marine sediments with great potential.  相似文献   

10.
《Quaternary Geochronology》2008,3(1-2):99-113
The Chinese Loess Plateau (CLP) is of major interest to Quaternary geologists because it represents an important terrestrial archive of palaeoclimatic fluctuations. Previous multiple-aliquot luminescence dating studies of Chinese loess mainly used thermoluminescence (TL) and infrared stimulated luminescence (IRSL) signals of polymineral fine-grains; these are known to be subject to anomalous fading and thus will tend to yield age underestimations. In this paper we investigate whether the blue-light stimulated luminescence (BLSL) signals from 63 to 90 μm quartz grains extracted from three western Chinese loess sites (Zhongjiacai, Le Du and Tuxiangdao) can be used to establish a reliable chronology. The single-aliquot regenerative-dose (SAR) procedure is used for the equivalent dose (De) determinations and the suitability of our measurement protocol is confirmed by dose recovery tests. The influence of an IRSL signal on the quartz De measurements derived from BLSL has been investigated. From these results we conclude that an IRSL contamination, expressed as an IRSL/BLSL ratio, of up to 10% can be accepted before the values of De are significantly affected. All three sites yield stratigraphically consistent and spatially highly reproducible optical ages up to about 50–70 ka. At the Tuxiangdao site a marked hiatus in the record is identified between ∼20 and ∼30 ka; this remained undetected in previous studies and clearly highlights the importance of high-resolution optical dating in Chinese loess research. The optical ages presented in this work provide more evidence for episodic loess deposition and varying loess accumulation rates in the western part of the CLP. Our study seems to confirm the potential of optically stimulated luminescence (OSL) dating using the SAR procedure applied to the very fine sandy quartz fraction in Chinese loess back to ∼40–50 ka (∼120–150 Gy).  相似文献   

11.
The Wulanmulun site found in 2010 is an important Paleolithic site in Ordos (China), from which lots of stone and bone artifacts and mammalian fossils have been recovered. It was previously dated by radiocarbon and optically stimulated luminescence (OSL) techniques on quartz. To further confirm the reliability of the chronology constructed based on OSL ages and test the applicability of the recently developed pIRIR procedure on sediments from northern China, twenty-four sediment samples (including eolian, lacustrine and fluvio-eolian sands) from the site were determined using the multi-elevated-temperature post-IR IRSL (MET-pIRIR or pIRIR) procedure on potassium feldspar. The results show that the studied samples have two MET-pIRIR De preheat plateaus (280–320 and 340–360 °C), and the bleaching rates of the luminescence signals are associated with sample ages and stimulation temperatures. All the pIRIR ages (7–155 ka) corrected for anomalous fading and residual dose obtained after solar bleaching for 15 h are larger than the corresponding quartz OSL ages (4–66 ka) previously determined, even for the young eolian samples (<10 ka). But the corrected IRSL(50 °C) ages (6–85 ka) are broadly consistent with the quartz ages. It appears that the IRSL(50 °C) ages are more reliable, although this contradicts the previously results obtained by other people. On the other hand, we also obtained an extended age plateau between the stimulation temperatures of 50 and 290 °C in the plot of age versus stimulation temperature (A-T plot) by subtracting different residual doses obtained after different bleaching times. The reliability of the plateau ages requires further investigation. For the sediment samples from this site, quartz should be more suitable for dating than K-feldspar, and the quartz OSL ages of 50–65 ka for its cultural layer should be reliable.  相似文献   

12.
A protocol for optical dating of potassium-rich feldspar (K-feldspar) is proposed. It utilizes the infrared stimulated luminescence (IRSL) signal measured by progressively increasing the stimulation temperature from 50 to 250 °C in step of 50 °C, so-called multi-elevated-temperature post-IR IRSL (MET-pIRIR) measurements. Negligible anomalous fading was observed for the MET-pIRIR signals obtained at 200 and 250 °C. This was supported by equivalent dose (De) measurements using the IRSL and MET-pIRIR signals. The De values increase progressively from 50 °C to 200 °C, but similar De values were obtained for the MET-pIRIR signal at 200 and 250 °C. Measurement of modern samples and bleached samples indicates that the MET-pIRIR signals have small residual doses less than 5 Gy equivalent to about 1–2 ka. We have tested the protocol using various sedimentary samples with different ages from different regions of China. The MET-pIR IRSL ages obtained at 200 and 250 °C are consistent with independent and/or quartz OSL ages.  相似文献   

13.
The high-temperature (e.g., >200 °C) post-infrared infrared (pIRIR) stimulated luminescence of feldspar has been widely used for dating, because it usually suffers negligibly from anomalous fading. However, compared to the quartz optically stimulated luminescence (OSL) or low-temperature (e.g., 50 °C) IR stimulated luminescence (IRSL) from feldspars, the high-temperature pIRIR signals have been shown to bleach more slowly and usually have high residual does of a few Gys or more, which limits its application to date relatively young samples and may cause problems for correcting residual dose/signal. In this study, we investigated the bleachability of K-feldspar pIRIR signals for individual grains. A significant variation in the bleachability of the pIRIR signal was observed among different K-feldspar grains from the same sample. Experiments show that such a variability may result in different residual doses for different grains and, consequently, additional scatter in De values. We present a method for quickly testing the bleachability of individual grains. Our result suggests that selecting the easy-to-bleach grains for De determination provides an efficient way to date young samples using high-temperature pIRIR signals, which avoids the compromise of using low-temperature pIRIR signals that may suffer from anomalous fading.  相似文献   

14.
Optically stimulated luminescence (OSL)-thermochronometry has recently been proposed as a tool capable of resolving cooling histories from the top 1–2 km of the Earth's crust. This is beyond the resolution of most low-temperature thermochronometric systems, and it offers a new opportunity to investigate the interactions between climate, tectonics and surface processes over Quaternary timescales. Here we present a multi-OSL-thermochronometer which exploits the different thermal stabilities of different temperature infra-red stimulated luminescence (IRSL) signals from K- and Na-rich K-feldspar extracts, utilising the established multi-elevated-temperature (MET) measurement protocol (Li and Li, 2011. Luminescence dating of K-feldspar from sediments: A protocol without anomalous fading correction. Quaternary Geochronology 6, 468–479). The theoretical aspects of multi-OSL-thermochronometry are discussed, prior to validation with an example from the eastern Himalayan syntaxis, one of the most rapidly exhuming settings on Earth. Our results show that multi-OSL-thermochronometry of feldspar is able to resolve rock cooling histories over timescales ≤0.2 Ma and provides much tighter constraint on late-stage cooling histories than single-system OSL-thermochronometry.  相似文献   

15.
Landforming processes are highly active in the Arctic, and luminescence dating can be used to establish a chronological framework for these processes. For example, luminescence ages of raised littoral and marine deposits provide the age control for many reconstructions of Pleistocene events in the Arctic. Due to the nature of the depositional environment (e.g. short transport distance, turbid water, long polar night) these types of sediment may not be completely zeroed at the time of deposition. To test the significance of incomplete bleaching in this type of environment, surface sediments were sampled along a transect from the margin of a glacier out into a nearby bay on NW Svalbard. The water in the bay is very turbid (secchi depth 0.1 m), but there is significant reworking by waves along the shores.Quartz optically stimulated luminescence (OSL) and feldspar infrared stimulated luminescence (IRSL) were measured using sand-sized grains. For quartz OSL and feldspar IRSL (50 °C) the ice-proximal sample showed relatively high doses (∼12 Gy) while nearby beach sand and shallow-marine deposits, as well as ice-distal sandur sediments, had much lower doses: most OSL doses were consistent with zero, while IRSL (50 °C) ranged from 0.5 to 6.5 Gy. Post-IR IRSL (290 °C) doses were overall much higher (∼20–55 Gy), which partly is due to a significant (∼12 Gy) unbleachable residual, and partly due to slower bleaching rates than for the IRSL (50 °C) signal.In this Arctic environment it appears that bleaching is limited in the first ∼100 m of meltwater transport from the glacier margin, but for material transported at least 3 km bleaching of OSL and IRSL (50 °C) signals is more or less complete. Given the very limited light penetration through the seawater in the bay, any bleaching must have occurred during fluvial/subaerial transport to the bay or by wave-reworking on the beach. Apart from the ice-proximal glacifluvial sediments, residual apparent doses recorded by quartz OSL and feldspar IRSL (50 °C) are negligible for the luminescence dating of Pleistocene-aged deposits of ice-distal, littoral and shallow-marine origin.  相似文献   

16.
Northeastern China is located in the East Asian monsoon region; it is sensitive to both high and low latitude global climate systems. Loess deposits in the region have considerable potential as sensitive archives of past climate changes. However, research into loess deposition and climate change in this region is restricted by the lack of independent age control. In this study, coarse-grained quartz SAR OSL and K-feldspar post-IR infrared (IR) stimulated luminescence (post-IR IRSL; pIRIR290) methods have been used to date the Sanbahuo loess site in northeastern China. The quartz OSL characteristics are satisfactory. The measured pIRIR290 De's do not vary significantly with IR stimulation temperatures between 50 °C and 260 °C; a first IR stimulation temperature of 200 °C was adopted. Dose recovery tests were performed by adding different laboratory doses to both laboratory bleached (300 h SOL2) samples and natural samples; the results are satisfactory up to ∼800 Gy. Resulting quartz OSL and feldspar pIRIR290 ages are in good agreement at least back to ∼44 ka; beyond this feldspar pIRIR290 ages are older. The feldspar ages are consistent with the expected age of the S1 palaeosol (MIS 5). There appears to have been a period of fast loess deposition at ∼62 ka, perhaps indicative of winter monsoon intensification with a very cold and dry climate that lead to a serious desertification of dunefields in northeastern China.  相似文献   

17.
Luminescence dating has been applied to scoria and lahar deposits from Somma–Vesuvius, Italy. Samples include scoria from the AD472 and 512 (or 536) eruptions and lahar deposits. In order to find a stable luminescence signal which is less affected by anomalous fading, infrared stimulated luminescence (IRSL) signals at elevated temperatures after bleaching with IR at 50 °C (termed post-IR IRSL; pIRIR) were tested at different preheat and elevated stimulation temperatures. The fading rates of both IRSL and pIRIR signals reduced dramatically with increasing preheat and pIRIR stimulation temperatures. A pIRIR signal measured at 290 °C after a preheat at 320 °C (60 s) and an IR stimulation at 50 °C (100 s) was selected to calculate the equivalent dose (De). The gamma spectrometry results indicate that the U-series nuclides are not in equilibrium and there is a large 226Ra excess. The dose rates and ages were calculated by assuming a 226Ra excess (over its parent 230Th) at deposition, and that this unsupported excess then decayed to the present level. The resulting luminescence ages of the two scoria samples agreed with the expected ages, and the ages of the lahar deposits indicate that they are associated with the AD1631 eruption.  相似文献   

18.
As part of the development of new laboratory lighting, we present a methodological approach applicable to the characterization of any light source intended for illumination in optical dating laboratories. We derive optical absorption cross-sections for quartz and feldspar from published data and compare these with the human eye response. The optimum peak wavelength giving the best clarity for non-dark adapted vision for the least trapped charge loss lies within the wavelength range 590–630 nm; we argue that it is unnecessary to consider dark-adapted vision. The predicted relative decay rates of quartz optically stimulated luminescence (OSL) and feldspar infrared stimulated luminescence (IRSL) signals by an incandescent light bulb and a compact fluorescent lamp (CFL) through an ILFORD 902 filter are first derived. These predicted decay rates are then compared with those of three relevant light-emitting diodes (LEDs); this comparison demonstrates the significant advantage of the LED sources over the filtered light sources, because essentially all of the reduction of both OSL and IRSL signals by the LEDs occurs at wavelengths to which the human eye is most sensitive. We conclude that exposure of quartz and feldspar extracts from various samples to the light from an LED with emission peak at 594 nm results in a ≤1% OSL or IRSL signal loss for a 48-h exposure at a power density of ∼0.2 μW.cm−2.  相似文献   

19.
A thick Middle and Late Pleistocene loess-palaeosol sequence is exposed at the Stari Slankamen section in the Vojvodina region situated in the south-eastern part of the Pannonian basin, Serbia. The profile exposes an about 45 m thick series of loess intercalated by at least eight pedocomplexes. Ten samples were dated by luminescence methods using a modified single aliquot regenerative dose (SAR) protocol for polymineral fine grains and for quartz extracts from the upper part of the Stari Slankamen loess sequence. The infrared stimulated luminescence (IRSL) and post-IR optically stimulated luminescence (OSL) signals from all polymineral samples showed anomalous fading, suggesting that the post-IR OSL signal is still dominated by feldspar OSL. The ages ranging from 4.6 to 193 ka were obtained after fading correction. These ages indicate that the loess unit V-L1L1, the weakly developed soil complex V-L1S1 and the loess unit V-L1L2 were deposited during marine isotope stage (MIS) 2, 3, and 4, respectively, and also indicate that the loess unit V-L2 is of the penultimate glacial age.  相似文献   

20.
This paper reports on the first investigations into the potential of luminescence dating to establish a chronological framework for fluvial processes in the Tisa River Valley in Vojvodina, N Serbia. A total of 18 samples were collected from a terrace exposure near Mužlja, which comprised non-fluvial deposits at the top and fluvial deposits at the base. The luminescence characteristics of sand-sized quartz and potassium feldspar grains were investigated using a single-aliquot regenerative dose (SAR) protocol. The quartz separates exhibit a complex behaviour, making this dosimeter less suited for optical dating. Investigations into the behaviour of infrared stimulated luminescence (IRSL) measured at 50 °C (IR50) from K-rich feldspar extracts showed that preheating in excess of 60 s at 225 °C leads to significant sensitivity changes. The effect of IR stimulation on the thermoluminescence (TL) signal and that of preheating on IRSL intensity were examined; the results are inconclusive with respect to thermal stability, but are not inconsistent with the idea that the data do not reflect depletion of an electron trap. The IR50-signal measured after a preheat of 60 s at 115 °C behaves well in the SAR protocol, although it suffers from anomalous fading. Assuming that the signal is thermally stable, the fading-corrected ages suggest that deposition occurred during the end of the Late Pleniglacial and the early Late Glacial, which is consistent with geological expectations. Our observations demonstrate that IRSL dating of feldspar holds potential for establishing a chronology of fluvial dynamics of the Tisa River in N Serbia. Further methodological investigations are desirable; however, as issues relating to the stability and resetting of the IRSL signal remain to be resolved.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号