共查询到20条相似文献，搜索用时 15 毫秒
1.
2.
3.
Vinh T. Tran Nagaraj C. Shivaramaiah Thuan D. Nguyen Eamonn P. Glennon Andrew G. Dempster 《GPS Solutions》2018,22(1):24
The sampling frequency of a digitized intermediate frequency signal has a strong effect on the measurement accuracy of Global Navigation Satellite System (GNSS) receivers. The delay-locked loop tracking error is significant when the sampling frequency is an integer multiple of the code chipping rate, the so-called commensurate sampling frequency, and the number of distinct instantaneous residual code phases is low. This results in distortions of the correlation shape and discriminator functions that lead to a significant accuracy degradation. These effects are most pronounced when the sampling frequency is low. Notwithstanding, it is generally good for receivers to keep the sampling frequency to a minimum owing to the processing load and power consumption. It creates a challenge for existing GNSS signal processing techniques. Random, sine and sawtooth jitters have been found to mitigate these distortions considerably. A software algorithm and two hardware receiver implementations of these solutions are proposed. A register-based architecture can be directly applied to the conventional receiver architecture, while the increase in resource and power consumption is insignificant. A RAM-based design cannot only considerably minimize utilized resources but also slightly reduce the power consumption compared to the conventional architecture. 相似文献
4.
5.
Weighted discriminators for GNSS BOC signal tracking 总被引：1，自引：1，他引：0
Modern Global Navigation Satellite System including Galileo and GPS III will employ multiplexed binary offset carrier (MBOC) modulation to achieve spectrum separation and enhanced tracking performance. A challenge of the MBOC or BOC signal tracking is the presence of ambiguities due to multiple sidepeaks of the autocorrelation functions. Several different techniques including multi-correlator and double estimator schemes have been proposed to address the ambiguity issue. We propose a class of ambiguity-free code tracking techniques by exploiting the unique features of the BOC modulation. In the proposed architecture, the incoming BOC-modulated signals are correlated with BOC-modulated replica and the spreading codes, respectively. Through a multiplicative combination strategy of the two correlator outputs, a noncoherent weighted discriminator is formed and shown to possess the ambiguity-free property. The multipath effect is assessed and compared with existing early-minus-late power and autocorrelation sidepeak cancellation technique discriminators. The noise effects of the theory and simulation are also discussed. In order to further verify the proposed scheme, a set of field data of a Galileo in-orbit validation satellite is collected and processed. It is demonstrated that the proposed method is simple to implement, free from ambiguities, and yields acceptable performance in the presence of multipath and noise. 相似文献
6.
7.
Youssef Tawk Cyril Botteron Aleksandar Jovanovic Pierre-André Farine 《GPS Solutions》2012,16(2):243-258
The world of global navigation satellite systems has been enhanced with several new or improved signals in space aiming to
optimize accuracy, reliability, navigation solution, and interoperability between different constellations. However, such
developments bring various challenges to the receivers’ designers. For example, acquisition and tracking stages turn into
more complex processes while handling the increasing bandwidth requires additional processing power. In this context, we study
the code tracking of Galileo E5ab in a full band or of only one of its components, i.e., either E5a or E5b. More specifically,
an architecture for tracking the E5 pilot channel as an AltBOC(15,10) or BPSK(10) modulation is introduced, and the performance
of well-known discriminator types is analyzed using analytical derivations and simulations of linearity and stability regions,
thermal noise tracking errors, multipath error envelopes and tracking thresholds. Different parameters, such as the front-end
filter bandwidth, the early/late chip spacing, un-normalized and normalized discriminators, are taken into consideration.
The results obtained are used to illustrate the main advantages and drawbacks of tracking the E5 signal as well as to help
defining the main tracking loop parameters for an enhanced performance. 相似文献
8.
A Kalman filter-based method combining the energy of both L1 C/A and L2C GPS signals in a combined tracking loop method to
enhance performance under adverse conditions is developed. Standard tracking methods and the ionospheric effect on GPS signals
are reviewed and compared to a new Kalman filter that simultaneously estimates delay, phase and total electron content by
combining L1 C/A and L2C code and phase discriminator outputs. The new filter is tested and compared to standard methods for
tracking L1 C/A and L2C using both simulated and real data. The new method is found to have improved sensitivity of 3 dB compared
to standard L1 tracking and 4.5 dB compared to standard L2C tracking while at the same time providing an accurate estimate
of the total electron content along the signal path. 相似文献
9.
针对北斗B1C信号在低载噪比情况下跟踪精度低的问题,提出一种基于扩展卡尔曼滤波（EKF）的北斗B1C信号数据/导频联合跟踪方法.通过构建数据/导频双通道联合跟踪模型,增加对B1C信号利用率,并在联合跟踪模型的基础上引入扩展卡尔曼滤波器,削弱传统跟踪环路中鉴别器和环路滤波器带来的跟踪误差,进一步提高跟踪环路对低载噪比信号的跟踪性能.仿真结果验证:在低载噪比情况下,相比于传统单导频通道跟踪、单导频扩展卡尔曼跟踪和联合跟踪,该方法可以有效提高跟踪精度. 相似文献
10.
多径信号是GPS定位的主要误差源之一。码和载波跟踪环是GPS接收机的重要组成部分，它们直接决定了接收机的性能，因此当前多径消除技术研究的核心即是从跟踪环内部着手研究。本文仔细分析了GPS接收机信号跟踪环以及多径信号对跟踪精度的影响，对伪距码与载波相位多径误差进行了比较，并且通过仿真结果和图表阐明了码和载波相位多径误差之间的协同关系。 相似文献
11.
在传统基于FPGA+DSP架构的导航接收机中,跟踪模块处于开环处理模式,存在实时性和可靠性差的问题,同时现场可编程逻辑门阵列(FPGA)和数字信号处理(DSP)之间大量的数据通信导致了IO资源和功耗的增加. 基于片上系统(SoC)架构提出了一种卫星导航接收机的闭环跟踪环路方案,整个跟踪处理过程在FPGA内实现了完整的闭环处理,有效地解决了开环跟踪存在的问题,极大地减少了FPGA与CPU之间的数据通信量. 此外,所有跟踪通道通过时、分复用的方式共用一个跟踪环路处理模块,有效节约了硬件资源,降低了成本,为小型化、低功耗卫星导航芯片的设计与发展奠定了基础. 相似文献
12.
13.
Kunlun Yan Nesreen I. Ziedan Hongping Zhang Wenfei Guo Xiaoji Niu Jingnan Liu 《GPS Solutions》2016,20(2):225-237
An open loop tracking architecture, which tracks GPS signals under weak and challenging conditions, is analyzed. The in-phase and quadrature-phase integration pair is regarded as a single tone complex signal. An FFT-based method is used as a frequency discriminator to estimate the Doppler frequency residual of the single tone signal. Another FFT-based method applies complex squaring to eliminate the effect of the navigation data bits polarities. The performance of the FFT-based discriminators is assessed in three criteria. Those criteria are the signal strength and dynamic range that can be tracked and the accuracy of the estimated Doppler frequency. In addition, the performance of the discriminators is analyzed to provide the theoretical and simulated peak detection probability. The results indicate that the FFT discriminator can track signals about 5 dB weaker than the signals that can be tracked by the complex squared FFT discriminator. In a quasi-static environment, the Doppler frequency residual can be assumed to be around zero, which can enable the FFT-based discriminators to track signals with approximately 2 dB less power. Moreover, the performance of the FFT-based discriminators is compared with the performance of two other frequency discriminators, namely the fast–slow and power-based. The comparison results indicate that these two frequency discriminators give higher frequency estimation accuracy, but they have a narrower dynamic range. 相似文献
14.
一种链码跟踪与相位验证相结合的直线提取方法 总被引：3，自引：2，他引：1
提出了一种链码跟踪与相位验证相结合的直线提取方法。该方法首先针对Canny边缘图提出一种完全细化方法;其次提出一种改进的链码跟踪方法,其步骤包括检测链码端点,建立动态链码主方向确定链码跟踪方向,优先跟踪八邻域内边缘点,八邻域内无边缘点再进行八邻域外边缘点,并采用直线化分析对链码进行动态约束;最后对链码进行直线拟合及相位验证,满足条件输出直线,不满足要求的链码则重新设定端点进行跟踪直线提取。通过多种不同光学图像数据的试验结果分析表明,本文所提出的方法不仅能够精确实现边缘直线信息的拟合,并且能够解决由于白噪声及相位编组所引起的直线断裂问题。 相似文献
15.
多径的存在会给全球导航卫星系统的接收机带来较大的定位误差。因此,高精度的接收机须对多径信号进行抑制。针对目前常用的多径抑制方法的优缺点,提出了一种基于多门延迟和曲线拟合的多径抑制方法。该方法通过多门延迟来重塑伪码的自相关函数,用于找到直射信号的伪码真实位置和接收机码跟踪环路鉴别结果之间的偏差,进一步通过曲线拟合方法更加精确地计算出该偏差,最后将该偏差通过开环方法补偿给伪距计算,使得接收机在不改变环路跟踪性能和抗动态干扰性能的前提下实现定位性能的提升。仿真结果表明新算法在前端带宽的影响下对短、中长多径均能进行有效地抑制。 相似文献
16.
In federated design of ultra-tight GPS/INS integrated system, the baseband signal pre-processing is completed in a single pre-filter assigned for each channel. As the state space model of this single pre-filter includes the code tracking errors coupled with carrier tracking errors, ionospheric errors and normalized signal amplitude, the carrier tracking process may be destroyed. Also, the measurement noises are not independent any longer after passing through the code and carrier discriminators. Therefore, we propose a double-filter-based pre-filter model that distributes the carrier and code tracking into two independent filters: a conventional pre-filter, where the normalized signal amplitude is excluded from the state space and tracks only the code signal, and a 3-dimension state filter, tracking the carrier signal. The measurement information from both filters is a scalar quantity, which removes most of the noise correlation. To further improve the performance of the double-filter-based pre-filter model, we propose a modified Kalman filter algorithm. Simulation and field tests have been conducted, and the performance analysis has been done for the following configurations in a vector-tracking mode: double-filter model with modified Kalman filter, double-filter model with conventional Kalman filter and traditional single-filter model. The preliminary analysis indicates that the double-filter model with modified Kalman filter shows the best performance in tracking and navigation domains, while the traditional single-filter model shows a sub-optimal performance. 相似文献
17.
强跟踪抗差自适应滤波算法及其在无人机导航定位中的应用 总被引：1，自引：0，他引：1
针对Sage-Husa自适应滤波算法在无人机导航定位应用中存在滤波发散和定位精度低的问题,本文提出一种强跟踪抗差自适应滤波算法。该算法在Sage-Husa自适应滤波算法基础上,引入强跟踪技术,通过自适应渐消因子降低历史数据对当前滤波的影响,从而抑制滤波发散,增强算法的稳健性;结合量测噪声和系统噪声进行实时估计,并且在估计中加入抗差因子抑制粗差对滤波的干扰,提高定位精度。仿真结果表明,该算法在发生滤波发散和粗差干扰的情况下能够表现出良好的滤波性能,较Sage-Husa算法有更强的稳健性。 相似文献
18.
19.
针对高动态场景,单独的码环路很难实现跟踪,由于高动态载波跟踪的算法很成熟,通常应用载波跟踪结果对码环路进行辅助,针对窄体制信号,这种方法可以帮助消除码环的动态误差,但对宽体制信号来说,辅助力度减小。从高动态宽带信号码跟踪误差门限以及跟踪精度入手,分析了单独码跟踪算法的易失锁性,理论和仿真验证应用高动态载波跟踪结果辅助码跟踪算法的有效性,且具有高的跟踪精度。这为导航接收机的跟踪算法提供了理论依据。 相似文献
20.
The analysis of tracking loops for global navigation satellite systems (GNSS) receivers is often confined to Monte Carlo approaches that can result in long simulation times and a limited number of simulation runs. A different approach based on Semi-Analytic principles is considered here. Matlab® code implementing a Semi-Analytic framework for the fast simulation of GNSS digital tracking loops is presented. The code structure is detailed and two specific examples implementing a standard PLL and the Double Estimator for unambiguous binary offset carrier (BOC) tracking are provided. The code has been organized in a modular way, and can be easily modified for the simulation of different tracking loops. 相似文献