共查询到19条相似文献，搜索用时 46 毫秒
1.
考虑流变与固结效应的桩筏基础-地基共同作用分析 总被引：2，自引：0，他引：2
土的流变性与地基固结的综合作用,导致了上部结构与地基变形的时效性,并呈现出明显的非线性,对桩筏基础与地基共同作用的工作机理及其工作性能产生重要影响。为此,采用弹黏塑性流变模型考虑土的流变特性,通过有限元方法数值求解Biot耦合固结方程,对桩筏基础与地基共同作用的时间效应问题进行了非线性数值分析。通过算例计算,对加载后桩筏基础荷载分配和沉降特性及下覆土层中孔隙水压力的扩散和消散规律进行了探讨。研究表明,地基孔隙水压力的增长和消散不仅具有Mandel-Cryer效应,而且依赖于土的流变变形,尤其在排水条件较差时更为明显。因此,在分析桩筏基础内力变形的时效性时必须考虑土的流变性与地基的固结作用的联合效应。 相似文献
2.
本文采用有限元法对高层建筑上部结构—桩筏基础—地基共同作用及相互影响进行了研究。研究表明:高层建筑上部结构—桩筏基础—地基共同作用及相互影响时,基础总体沉降和差异沉降随楼层的增加呈非线性变化趋势,上部结构中存在次应力,弯矩和轴力比常规法设计偏大;随楼层的增加,桩体对荷载的分担比在减少,土体分担比在增加;随着上部结构刚度的增加,荷载向角桩、边桩集中;增加筏板厚度,能减少一定的差异沉降和基础平均沉降,从而减少上部结构的次应力,提高地基土的荷载分担比,同时筏板下桩顶反力分布更不均匀,因此需要从筏板受力,以及考虑筏下桩、土的受力来综合确定一个合理的筏板厚度,使设计安全经济;随着地基土变形模量的提高,地基土分担的上部荷载增加,桩顶反力趋向平均,筏板最大弯矩逐渐减小。桩筏基础在均匀布桩条件下呈中间大边缘小的“碟型”分布。差异沉降是由于上部结构次生应力和筏板内力产生的。通过对地基土刚度以及桩长、桩径、桩距等五种桩基刚度的调整,并分析不同刚度对基础差异沉降影响可知:改变桩长的布桩形式并结合地基土刚度调整的中心布桩形式是高层建筑桩筏基础最佳设计方案。 相似文献
3.
桩筏基础由桩和筏组成一种联合基础，筏将大部分总荷载传递给桩，同时其本身也承担总荷载的一部分。因此，充分认识桩筏基础对上部荷载向地基土的传递特性是非常必要的。该文提出一个桩筏基础传递荷载的计算模型，模型考虑了桩的布置形式对地基接触压力的影响，同时还考虑了桩的受荷过程中的变化特性，并详细分析了桩与筏之间的荷载分配问题。 相似文献
4.
高层建筑桩筏基础优化设计研究 总被引：7，自引：0，他引：7
将上部结构与地基基础共同作用分析方法和优化设计理论相结合,提出了桩筏基础优化设计模型和实用分析方法。通过抽桩分析,证明了边弱中强和墙柱下强、跨中板下弱的布桩原则是正确的。 相似文献
5.
桩筏基础相互作用分析 总被引：1，自引：0，他引：1
提出了考虑土-桩-筏相互作用的迭代分析方法,可获得筏板的内力和桩身轴力等.考虑了桩筏基础下群桩效应作用的群桩桩顶反力分布、群桩桩端力分布及桩与桩相互作用等问题,使得计算的群桩单桩刚度较合理.同时,具有能考虑土的非线性、成层地基及利用单桩静载试验成果反演分析所得参数运用于群桩分析等特点.采用的8节点等参板单元可适用于分析平面不规则形状及变厚度的薄筏板和厚筏板.用笔者提出的方法对桩筏基础实例进行了分析,研究了桩长对该桩筏基础相互作用的影响,并与实测成果及其他学者研究成果进行了对比,表明了该方法能较合理地分析桩筏基础相互作用. 相似文献
6.
7.
提出一种层状地基中柔性筏板-群桩共同作用分析方法,探讨筏板刚度对桩筏基础沉降的影响,并成功预测了往复荷载下桩筏基础的长期沉降。筏板刚度采用Mindlin板理论的有限单元法分析;桩-土体系的刚度矩阵中,桩顶面-桩顶面、桩顶面-土表面以及土表面-土表面的相互作用分析采用层状剪切位移法借助层状地基的Burmister位移解求得。基于层状地基中柔性筏板-群桩的沉降计算方法以及往复荷载下土体压缩模量的衰减特性得到了桩筏基础的长期沉降预测方法。与已有文献方法和离心模型试验结果的对比分析表明,柔性筏板-群桩共同作用方法得到的沉降值具有较高的精度。 相似文献
8.
坐落于上海的金茂大厦、上海环球金融中心和上海中心大厦三幢闻名世界的超高层建筑的基础均为补偿深埋桩筏基础。在补偿深埋桩筏基础设计中如何充分考虑补偿基础的优越性,如何考虑深埋基础的抗风能力,是值得研究的问题。利用高层建筑与地基基础共同作用的分析方法,结合统计-经验公式对该三幢大楼的桩筏深基础进行了再分析。通过再分析在节约相当数量的桩之后,其地基承载力和变形仍然能够满足设计要求。同时在再分析中进一步探讨优化设计的能力,论证地下连续墙可以分担相当数量的荷载。相关案例的再分析对进一步完善补偿深埋桩筏基础设计理论提出建议,可为国家节省大量投资。 相似文献
9.
桩径优化是桩筏基础以差异沉降最小化为目标的基础优化分析的重要组成部分。基于桩筏基础通用分析方法,结合遗传算法提出了包含非线性约束条件的以差异沉降控制为目标的桩筏基础桩径优化分析模型,并给出了优化分析的实施步骤。通过示例说明了桩径优化的实施情况,对比给出了优化前后基础沉降、桩基荷载分布与筏板分担比、筏板弯矩和剪力结果。最后通过参量分析研究了筏板厚度、桩基参量和土体参量对最优桩径确定的影响程度,桩长和土体特性对桩径优化结果影响显著,而桩体材料特性和筏板厚度对桩径优化结果影响不大。 相似文献
10.
梁板式桩筏基础与传统桩筏基础一样具有较高的承载力和变形控制能力,且较传统桩筏基础能够节约成本,具有重要经济效应,因而成为了新兴的基础形式被应用于风电基础中。然而目前该基础仍采用传统桩筏基础的设计方法进行计算,造成了巨大的浪费。为了弥补目前梁板式风机基础设计方法的缺陷,采用大型室内模型试验对梁板式风机基础的受力变形特性进行研究,分析了竖向荷载作用下梁板式风机基础内梁、桩、土体等的受力机制及特性。研究表明,在工作荷载范围内,梁板式桩筏基础体系处于弹性状态,且梁板式桩筏基础具有一定的柔性,中央与边缘存在一定的差异沉降。桩-桩相互作用及桩-土相互作用对具有一定柔性的梁板式桩筏基础受力变形特性具有重大的影响,应该修正现行设计时不考虑这几个因素的缺点。 相似文献
11.
变刚度优化设计对于复杂环境中的大规模桩筏基础始终是一个重要难题。基于有限元分析提出一种两阶段优化设计方法,该方法首先根据传统均匀布桩方案的桩顶应力分布对群桩进行分区,然后依据每个子区域桩顶应力之间的关系确定基桩数量调整系数,最后通过调整桩间距来改变各子区域的基桩数量,从而实现变刚度优化设计。运用该方法对多层土体中承担非均匀上部结构荷载的大规模桩筏基础进行变刚度优化设计,计算结果表明优化设计后筏板的差异沉降、平均整体弯矩和群桩顶部的差异应力均显著降低。该方法计算简单,应用范围广,且不受复杂土层条件、非均匀上部结构荷载以及桩基础规模大小形状的限制。 相似文献
12.
In a piled raft, the length and arrangement of piles has a significant effect on the stresses and deflections of the raft. The use of piles with different dimensions and properties below a raft is an innovative concept and can optimize the design of a piled raft. In this study, an integral equation method with a fictitious pile model was adopted to analyze the piled raft foundation with dissimilar piles. The Fredholm integral equations of the second kind were obtained for this problem. The loads shared by piles and subsoil, the load transfer, and the settlement of the piled raft were obtained using numerical calculation. The results from the present method were compared with those in the literature. An optimization technique was introduced to design piled rafts with dissimilar piles. The stiffening effect of piles on the surrounding soil is also discussed as compared the conventional interaction factor approach. 相似文献
13.
In designing piled raft foundations, controlling the total and differential settlements as well as the induced bending moments of the raft is crucial. The majority of piled raft foundations have been designed by placing piles uniformly. In such a design method, the settlements of the piled rafts are likely to be large, which leads to an increase of the pile length and/or number of piles required to reduce the settlements. However, this increase does not satisfy the requirement for economical design. On the basis of a parametric study, this paper contributes a framework for considering an economical design methodology in which piles are placed more densely beneath the column positions when the piled raft is subjected to column loads. The analysis uses PLAXIS 3D software, and the validity of the parametric study is examined through the results of centrifuge model tests conducted by the authors. The study shows that the concentrated pile arrangement method can help to considerably reduce the total and differential settlements as well as the induced bending moments of the raft. Moreover, the effects of parameters, such as pile length, pile number, raft thickness and load types, on the piled raft behavior are investigated. This study can help practicing engineers choose pile and raft parameters in combination with the concentrated pile arrangement method to produce an economical design. 相似文献
14.
A piled raft foundation comprises both piles and a pile cap that itself transmits load directly to the ground. The aim of such a foundation is to reduce the number of piles compared with a more conventional piled foundation where the bearing effect of the pile cap, or raft, is ignored. This paper describes a ‘hybrid’ approach for the analysis of piled raft foundations, based on a load transfer treatment of individual piles, together with elastic interaction between different piles and with the raft. The numerical analysis is used to evaluate a simple approximate method of estimating the overall response of the foundation from the response of the component parts. The method leads to estimates of the overall foundation stiffness, the proportion of load carried by the pile group and the raft, and an initial assessment of differential settlements. Parametric studies are presented showing the effect of factors such as raft stiffness and pile spacing, length and stiffness, and a worked example is included demonstrating the accuracy of the approximate design approach. 相似文献
15.
This paper presents a simplified nonlinear solution for piled raft foundations in layered soils under vertical loading. Based on the elastic–plastic analysis of a single pile in a layered soil, the shielding effect between a receiver pile and the soil is taken into account to modify the conventional interaction factor between two piles. An approximate approach with the concept of the interaction factor is employed to study the nonlinear behavior of pile groups with a rigid cap. Considering the variation of soil properties, the solution to multilayered elastic materials is used to calculate the settlement of the soil. The interactions between pile–soil–raft are taken into account to determine the stiffness matrix of the piled raft. By solving the stiffness matrix equations, the settlement and the load shared by the piles and raft could be obtained. Compared with results of the available published literatures, the proposed solution provides reasonable results. 相似文献
16.
A simplified method of numerical analysis has been developed to estimate the deformation and load distribution of piled raft foundations subjected to vertical, lateral, and moment loads, using a hybrid model in which the flexible raft is modelled as thin plates and the piles as elastic beams and the soil is treated as springs. Both the vertical and lateral resistances of the piles as well as the raft base are incorporated into the model. Pile–soil–pile, pile–soil–raft and raft–soil–raft interactions are taken into account based on Mindlin's solutions for both vertical and lateral forces. The validity of the proposed method is verified through comparisons with several existing methods for single piles, pile groups and piled rafts. Workable design charts are given for the estimation of the lateral displacement and the load distribution of piled rafts from the stiffnesses of the raft alone and the pile group alone. Additionally, parametric studies were carried out concerning batter pile foundations. It was found that the use of batter piles can efficiently improve the deformation characteristics of pile foundations subjected to lateral loads. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
17.
Meisam Rabiei Asskar Janalizadeh Choobbasti 《Geotechnical and Geological Engineering》2016,34(1):75-85
Piled rafts have been widely adopted as an effective foundation for designing high-rise buildings because of their efficiency in controlling the total and differential settlements and improving bearing capacity. In many cases the piled rafts settlements are likely to be large, which leads to an increase of the pile length and/or number of piles required to reduce the settlements. However, this increase does not satisfy the design requirements or an economical design. The majority of piled raft foundations has been designed with a uniform pile length and configuration. This paper describes the process of optimizing the design of a piled raft foundation for a high rise building in the Mazandaran province in Iran by considering an economical design methodology in which piles are placed more densely beneath the maximum load positions when the piled raft is subjected to non-uniform loads. By using the ELPLA software in the analysis process, the validity of the software is examined through the results of a report prepared on behalf of Technical Committee TC18 on piled foundations. The study shows that the pile arrangement method can help to considerably reduce the total and differential settlements with similar total pile length as well as the induced bending moments and shear forces of the raft. This study can help practicing engineers to choose pile and raft parameters with the pile arrangement method to produce an economical design. 相似文献
18.
Disconnected piled raft foundations are characterised by no structural connection between the upper raft and the underlying piles, mostly playing the role of settlement-reducers. The resulting raft–pile gap is usually filled with a granular interlayer, through which the loads from the superstructure are transferred to the piles.In this paper, the complex interaction mechanisms involving the foundational components (raft, piles and soil) are numerically investigated by means of 3D finite elements analyses, accounting for soil non-linearity. The main features of the soil–structure interaction mechanisms under purely vertical external loads are explored over a realistic range of raft–soil gaps for different pile configurations, in which the number of piles – i.e. their spacing – is varied. Special attention is also devoted to the structural response of the piles in terms of axial and bending internal stress resultants. In particular, while disconnection beneficially affects the structural pile response, increasing the raft–pile gap tends to reduce the overall settlement/stiffness efficiencies.The numerical results being presented are in substantial agreement with the outcomes from literature small-scale experiments and suggest a number of relevant theoretical inferences. 相似文献
19.
H. G. Poulos 《国际地质力学数值与分析法杂志》1994,18(2):73-92
This paper presents an approximate method of numerical analysis of piled–raft foundations in which the raft is modelled as a thin plate and the piles as interacting springs of appropriate stiffness. Allowance is made for the development of limiting pressures below the raft and of the ultimate axial load capacity of the piles. Comparisons between this analysis and existing solutions verify that, despite the approximations involved, the analysis can provide solutions of adequate accuracy for the settlement and pile load distribution within a piled raft. Comparisons are also made with the results of a series of centrifuge tests and with measurements of the performance of a full-scale piled raft. In both cases, the analysis predicts very well the settlement and proportion of load carried by the piles. 相似文献