共查询到20条相似文献，搜索用时 390 毫秒
1.
The distribution of selected critical elements in the sedimentary rocks of the Carboniferous coal-bearing series within the Polish Coal Basins is presented.Critical elements such as Be,Mg,Si,P,Sc,V,Co,Y,Nb,In,Sb,La,Ce,Hf,Ta,W,Bi were analysed using inductively-coupled plasma mass spectrometry(ICP/MS).Concentrations of elements such as Sb,Bi,In and,to a slightly lesser extent,Nb,as well as Sc,show average concentrations higher than those from the upper continental crust.The average concentrations of elements like Hf,Mg,P,Y,La,and Ce are slightly lower than in the upper continental crust.Other elements,such as Be,Co,Si,Ta,W and V have average concentrations that are similar,but slightly enriched or slightly depleted,relative to the upper continental crust.The research showed enrichment of some critical elements in the analysed samples,but not high enough that extraction would be economically viable.Statistical methods,which include correlation coefficients between elements and cluster analysis,reveal a strong positive correlation between elements like Be,Bi,Nb,Sc,Ta,W and V.Very high,almost total,positive correlation is also noted between La and Ce. 相似文献
2.
引言易门安宁禄丰三县,为云南中部产铁区域,土炉冶炼,采挖已久,惟关於矿产之价值,矿床之种类,作科学之研究者,至近年来,始有其人,最初有法人来克里者,曾考察易门铁矿, 相似文献
3.
4.
5.
6.
7.
攀枝花及倒马坎,位盐边县西南,踞金沙江北岸。攀枝花山势陡峻,距江边约三公里,倒马坎山小坡平,即濒江干。铁矿藏量颇丰,质亦良佳,且密迩永仁煤田,及盐边县属乌拉阿卡坭红果等煤区,洵可大量开采,西南钢铁事业,至有望焉。 相似文献
8.
关于甘肃及青海境内之第三纪红色地层 总被引：1，自引：0，他引：1
一、绪言在甘肃及青海境内,包括祁连山南北,秦岭以北,并六盘山东西地带,第三纪红色地层,颇佔重要地位,惟迄今对其命名,时代,及分层等尚末能一致,兹就著者各处观察所得,并与前人所论比较论证,期能获得进一步之认识。 相似文献
9.
10.
11.
在分析和总结前人对红藻石和蓝藻石研究成果基础上,结合岩石薄片显微镜下观察实例,发现在以往碳酸盐岩颗粒分类中没有红藻石和蓝藻石的合适位置。鉴于红藻石重要的成因意义和造礁作用,有必要明确红藻石的概念和归属。珊瑚藻本身极易钙化,经生物矿化作用最终保存下来的珊瑚藻屑一直放在生物碎屑中,而红藻石是由非固着的珊瑚藻构成的钙质独立结核,因此也可以被划分到生物碎屑中。蓝藻石作为蓝细菌钙化作用的产物,同时鉴于蓝藻石的广泛存在,把钙化蓝细菌形成的核形石命名为蓝藻石,这一重要概念从提出到现在一直被使用。然而蓝绿藻概念已变更为蓝细菌,蓝藻石的形成与藻类无关,显然将其称作蓝菌石更加确切。因此,应将红藻石和蓝藻石分别归为生物碎屑和核形石当中,并用新的术语蓝菌石替代蓝藻石。其意义在于使红藻石和蓝藻石的概念及归属更为规范,并为碳酸盐岩颗粒的深入研究提供有益线索。 相似文献
12.
单颗粒矿物微量元素激光原位定量分析测试数据的大量积累和研究,使矿物成为矿床地球化学研究和矿床勘查的重要示踪剂。本文重点选择磁铁矿、磷灰石、石榴子石、榍石、锆石、绿泥石和绿帘石等的原位分析研究所获得的认识,介绍单颗粒矿物成分组合及变化在矿床类型划分、成矿年龄测定、氧逸度、成矿过程与物质来源、找矿与勘探等方面的应用。不同矿床类型中普遍存在的矿物,如磁铁矿、磷灰石等的微量元素含量及组合差异,提供了矿床类型识别的标志。单颗粒矿物,特别是矿石矿物和密切共生矿物如锡石、铌钽铁矿、赤铁矿、石榴子石、方解石等的原位定年,使成矿年龄的直接准确测定成为现实。矿物中变价元素,如Fe、V、Mn、Ce、Eu含量和/或比值的变化,指示了成矿过程氧逸度及其变化特点。从矿物核部向震荡环带与边部的微量元素含量或同位素组成的变化,示踪了成矿过程中流体来源或性质的变化。斑岩和矽卡岩矿床中与成矿作用关系密切的蚀变矿物,如绿泥石、绿帘石的形成温度、特征微量元素比值,如Ti/Sr、Ti/Co、V/Ni、Mg/Sr等,与距矿床中心距离呈线性函数关系,可定量预测距矿床中心的距离,使以绿泥石、绿帘石为代表的找矿指示矿物研究迅速发展。 相似文献
13.
RS和GIS技术集成及其应用 总被引：13，自引：3，他引：10
何庆成 《水文地质工程地质》2000,27(2):44-46
本文简要地介绍了ＲＳ（遥感图像处理系统）和ＧＩＳ（地理信息系统）技术及其集成的基本概念和方法。讨论了ＲＳ和ＧＩＳ技术及其集成的内在涵义、相互关系,认为ＲＳ是ＧＩＳ重要的外部信息源,是其数据更新的重要手段,尤其对于全球性的 地理动力学分析,更必须有ＲＳ所提供的覆盖全球的动态数据与ＧＩＳ的结合。反之,ＧＩＳ则可以提供ＲＳ所需要的一些辅助数据,以提高ＲＳ图像的信息量和分辨率,同时,ＧＩＳ可以将实地调查所 相似文献
14.
为解决5000 m地质岩芯钻探基础准则与依据缺失问题，提高钻探装备的自动化、智能化水平，启动了5000 m智能地质钻探技术装备研发工作，通过钻机装备、钻探器具研制，钻探工艺技术研究并经试验示范验证，取得多项创新成果，形成了5000 m地质岩芯钻探技术体系。通过特深孔钻孔口径与管柱规格优化研究、钻杆规格设计、装备性能参数选配，形成了5000 m地质岩芯钻探技术规范体系；基于5000 m特深孔地质岩芯钻机、孔口自动化作业装置等关键设备研制，实现了绳索取芯钻进的孔口作业全流程自动化，形成了轻量化钻机孔口管柱柔顺控制技术；基于复杂地层孔内工况判别、钻进参数优化与轨迹优化控制等技术问题研究，形成了多源信息融合的地面与孔底一体化钻进过程智能控制技术；基于高性能薄壁绳索取芯钻杆和系列小口径高效钻具研制，形成了大深度绳索取芯系列钻杆钻具技术；研发了耐高温环保型冲洗液、生物破胶废浆处理技术、“广谱型”双浆堵漏技术，形成了绿色环保型冲洗液体系与护壁堵漏技术。 相似文献
15.
为解决5000 m地质岩芯钻探基础准则与依据缺失问题，提高钻探装备的自动化、智能化水平，启动了5000 m智能地质钻探技术装备研发工作，通过钻机装备、钻探器具研制，钻探工艺技术研究并经试验示范验证，取得多项创新成果，形成了5000 m地质岩芯钻探技术体系。通过特深孔钻孔口径与管柱规格优化研究、钻杆规格设计、装备性能参数选配，形成了5000 m地质岩芯钻探技术规范体系；基于5000 m特深孔地质岩芯钻机、孔口自动化作业装置等关键设备研制，实现了绳索取芯钻进的孔口作业全流程自动化，形成了轻量化钻机孔口管柱柔顺控制技术；基于复杂地层孔内工况判别、钻进参数优化与轨迹优化控制等技术问题研究，形成了多源信息融合的地面与孔底一体化钻进过程智能控制技术；基于高性能薄壁绳索取芯钻杆和系列小口径高效钻具研制，形成了大深度绳索取芯系列钻杆钻具技术；研发了耐高温环保型冲洗液、生物破胶废浆处理技术、“广谱型”双浆堵漏技术，形成了绿色环保型冲洗液体系与护壁堵漏技术。 相似文献
16.
Etch and intracutaneous landforms and their implications 总被引：1，自引：0，他引：1
C. R. Twidale 《Australian Journal of Earth Sciences》2013,60(3):367-386
Many landforms, major and minor, and including plains of various types, inselbergs, boulders, flared slopes, Rillen and rock basins, are initiated beneath the land surface, at the weathering front. They have evolved in various lithological settings. Most are formed by differential moisture attack, either controlled, or strongly influenced, by bedrock structure. Such forms of subsurface derivation may be differentiated into etch or subcutaneous features that were initiated at the base of the regolith, and intracutaneous forms that had their origin within the weathering zone. Although the agent or agents responsible for eroding the regolith and exposing the bedrock forms have varied in space and time, the similarity of etch and intracutaneous forms is such that their basic morphology persists regardless of the climatic regime in which they now occur. As the regolith is widely developed on the land surface, the forms initiated beneath and within it cannot be taken as climatic indicators. Indeed, like structural forms, these convergent forms represent a varied but significant azonal element in the physiographic landscape. 相似文献
17.
Cumulate and Cumulative Granites and Associated Rocks 总被引：1，自引：0，他引：1
Abstract. Processes that move crystals relative to melt, that is crystal fractionation, are of major importance in producing variations that are observed within cogenetic suites of granites. In low‐temperature granite suites, crystal fractionation initially involves the progressive separation of crystals residual from partial melting from that partial melt. Once separation of those crystals, or restite, has been completed, further fractionation may occur through the separation of crystals that had precipitated from the melt, the process known as fractional crystallization. High‐temperature granite magmas are largely or completely molten and elements such as Ca, Mg and Fe, and their associated minor elements, are in that case dissolved in the melt. Such magmas, particularly those that are more potassic and hence contain a higher fraction of low temperature melt, may evolve compositionally through fractional crystallization. Cumulate rocks result, comprising a framework of cumulus minerals with interstitial melt. In this process some of the melt is also displaced to form more felsic rocks. Such cumulate rocks may have distinctive chemical compositions, but that is often not the case. Distinctive features include SiC>2 contents near or below 50 % in rocks that are transitional in the field to more felsic granites, very high Cr and Ni, very low K, P, Ba, Rb and Zr, and anomalous abundances of the anorthite components Ca and Al. These rocks may also have positive Eu anomalies. Cumulate rocks do not necessarily have distinctive textures, at least as such features are understood at this time. Fractional crystallization can also involve the movement of precipitated crystals relative to melt. We refer to rocks as cumulative when formed from the fractions in which the abundance of crystals has increased. The production of cumulative granites typically occurs at more felsic melt compositions than is the case for cumulate granites, and this process may have its greatest significance in the fractional crystallization of the felsic haplogranites. Relative to felsic granites of broadly similar compositions lying on a liquid line of descent, cumulative granites contain more Ca, reflecting the addition from elsewhere of plagioclase crystals with solidus compositions. The abundances of Sr and Ba may be high to very high, and sometimes there are positive Eu anomalies. Cumulative I‐type granites may have low abundances of Y and the heavy REE, while the S‐type granites can be very distinctive with anomalously high abundances of Th and the heavy REE resulting from the concentrating of monazite. Generally, but not always, those who propose fractional crystallization as a mechanism for producing compositional variation within a suite of granites do not state whether the rocks in that particular case are thought to lie on a liquid line of descent or are cumulates/cumulative, although it is generally presumed that they were melts. Our experiences in eastern Australia have shown that the mechanism of fractional crystallization was quantitatively not as important during granite evolution as many workers would expect. However, there are some excellent examples of that process, most notably the Boggy Plain Supersuite. Overall in eastern Australia, varying degrees of separation of restite is a much more common mode of crystal fractionation, and that may also be seen to be the case for some other granite provinces if they are examined with that possibility in mind. 相似文献
18.
《International Geology Review》2012,54(5):526-533
The impact of gigantic meteorites momentarily creates extremely high pressures and temperatures, leading to the formation of distinctive objects — impact breccias and impactites — at the points where they fall. The Zhamanshin crater is one such place. This annular structure has a diameter of about 10 km, contoured by a low rim made up of a body of shattered Paleozoic rocks thrown out from the ring's center, from depths exceeding 100 - 200 m. Among these breccias have been found pieces and lenticular bodies of remelted rocks — impactites, called zhamanshinites. These thermally altered rocks from a series ranging from baked clays to cinder-like, partly recrystallized substances, glass, and black drops and spattered droplets (up to 1 - 5 cm) of isotropic glass that undoubtedly hardened as they fell through the air. The refused neogenic substances formed by selective evaporation are characterized by a considerable deficit of K and Na, excess Al2O3 and SiO2, a lack of H2O, and a sharp predominance of Fe+2 over Fe+3. Their characteristic shape and distinctive structure and composition suggests that these remelted droplets are tektites, which were called irgizites when first found in the USSR. Their occurrence in the meteorite crater confirms the idea of a genetic unity between tektites and impactites. Selective evaporation of the more volatile elements is characteristic of the surfaces of small planets lacking an atmosphere, but is not characteristic of the earth's surface. The processes and substances occurring at the impact points of gigantic meteorites are therefore unique on the earth, but highly typical of the surfaces of the Moon, Mars, Mercury, and other relatively small celestial bodies. 相似文献
19.
现代新技术新方法与工程地质 总被引：1，自引：0，他引：1
陈剑平 《水文地质工程地质》1997,24(2):46-48
本文阐述了瓣技术，新方法应用于工程地质研究取得的进展，内容涉及原位测试技术，数值模拟技术，物理模拟技术和物探测技术，这些方面的研究推动了工程地质学的发展。 相似文献
20.
毫米波测云雷达的特点及其研究现状与展望 总被引：17，自引：2，他引：15
云在大气的能量分配、辐射传输,尤其是水循环系统中有不可忽视的作用。云探测对云物理、人工影响天气、气候变化和航空航天等领域有重要意义,是大气科学研究的热点之一。尽管目前已经发展了很多种遥感设备对云进行观测(如激光雷达、卫星、云幂仪等),但这些设备无法得到高时空分辨率的云水平和垂直结构,而毫米波雷达是云三维精细结构探测的重要工具。由于毫米波雷达具有更接近小粒子尺度的短波长,因此更适合用来探测弱云,同时毫米波雷达也存在衰减严重的缺点。介绍了毫米波雷达的特点以及其探测小粒子的优势;对比分析了其与新一代多普勒天气雷达、晴空风廓线雷达的差异,得出：毫米波雷达具有高时空分辨率,能够更精确地反映云的垂直和水平结构,比普通天气雷达更适合监测云的变化。概括了国内外毫米波测云雷达的发展现状以及在云物理研究方面的情况,并展望了国内毫米波雷达未来研究的方向。 相似文献