共查询到20条相似文献，搜索用时 15 毫秒
1.
基于小波变换的拟合规范反应谱多维地震动模拟 总被引：1，自引：0，他引：1
本文提出一种基于小波变换的拟合规范反应谱的多维地震动模拟算法。首先将规范反应谱推广到三维相关设计反应谱,然后将已有的三维地震动加速度时间历程曲线分解为一系列不同频段上的地震动分量,调整每一个地震动分量的幅值使其在相应的频率范围内拟合设计反应谱,最后经过调整后的地震动分量进行重构得到更新的地震动时间历程曲线。将该时间历程曲线的反应谱与目标反应谱进行比较,重复该过程直到误差位于特定的范围内。该方法可以保留原始地震动的局部时-频特性,为多维地震动的模拟提供了一种新的方法。 相似文献
2.
Wavelet-based generation of spectrum-compatible time-histories 总被引：6，自引：0，他引：6
This paper deals with the well-known problem of generating spectrum-compatible synthetic accelerograms for the linear and non-linear time-history analyses of structural systems. A wavelet-based procedure has been used to decompose a recorded accelerogram into a desired number of time-histories with non-overlapping frequency contents, and then each of the time-histories has been suitably scaled for matching of the response spectrum of the revised accelerogram with a specified design spectrum. The key idea behind this iterative procedure is to modify a recorded accelerogram such that the temporal variations in its frequency content are retained in the synthesized accelerogram. The proposed procedure has been illustrated by modifying five recorded accelerograms of widely different characteristics such that those are compatible with the same USNRC design spectrum. 相似文献
3.
With the recent emergence of wavelet‐based procedures for stochastic analyses of linear and non‐linear structural systems subjected to earthquake ground motions, it has become necessary that seismic ground motion processes are characterized through statistical functionals of wavelet coefficients. While direct characterization in terms of earthquake and site parameters may have to wait for a few more years due to the complexity of the problem, this study attempts such characterization through commonly available Fourier and response spectra for design earthquake motions. Two approaches have been proposed for obtaining the spectrum‐compatible wavelet functionals, one for input Fourier spectrum and another for input response spectrum, such that the total number of input data points are 30–35% of those required for a time‐history analysis. The proposed methods provide for simulating ‘desired non‐stationary characteristics’ consistent with those in a recorded accelerogram. Numerical studies have been performed to illustrate the proposed approaches. Further, the wavelet functionals compatible with a USNRC spectrum in the case of 35 recorded motions of similar strong motion durations have been used to obtain the strength reduction factor spectra for elasto‐plastic oscillators and to show that about ±20% variation may be assumed from mean to 5 and 95% confidence levels due to uncertainty in the non‐stationary characteristics of the ground motion process. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
4.
Stochastic simulation of regionalized ground motions using wavelet packets and cokriging analysis 
下载免费PDF全文
下载免费PDF全文 Performance‐based earthquake engineering often requires ground‐motion time‐history analyses to be performed, but very often, ground motions are not recorded at the location being analyzed. The present study is among the first attempt to stochastically simulate spatially distributed ground motions over a region using wavelet packets and cokriging analysis. First, we characterize the time and frequency properties of ground motions using the wavelet packet analysis. The spatial cross‐correlations of wavelet packet parameters are determined through geostatistical analysis of regionalized ground‐motion data from the Northridge and Chi‐Chi earthquakes. It is observed that the spatial cross‐correlations of wavelet packet parameters are closely related to regional site conditions. Furthermore, using the developed spatial cross‐correlation model and the cokriging technique, wavelet packet parameters at unmeasured locations can be best estimated, and regionalized ground‐motion time histories can be synthesized. Case studies and blind tests using data from the Northridge and Chi‐Chi earthquakes demonstrate that the simulated ground motions generally agree well with the actual recorded data. The proposed method can be used to stochastically simulate regionalized ground motions for time‐history analyses of distributed infrastructure and has important applications in regional‐scale hazard analysis and loss estimation. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
5.
Energy‐compatible and spectrum‐compatible (ECSC) ground motion simulation using wavelet packets 下载免费PDF全文
下载免费PDF全文 A stochastic ground‐motion simulation and modification technique is developed to generate energy‐compatible and spectrum‐compatible (ECSC) synthetic motions through wavelet packet characterization and modification in both frequency and time domains. The ECSC method significantly advances traditional spectral matching approaches, because it generates ground motions that not only match the target spectral accelerations, but also match Arias intensity build‐up and significant durations. The great similarity between the ECSC simulated motions and the actual recorded motions is demonstrated through one‐to‐one comparison of a variety of intensity measures. Extensive numerical simulations were also performed to validate the performance of the ECSC ground motions through nonlinear analyses of elasto‐plastic oscillators. The ECSC method can be easily implemented in the generalized conditional intensity measure framework by directly simulating a set of motions following a targeted distribution of multiple intensity measures. Therefore, the ECSC method has great potential to be used in performance‐based earthquake design and analysis. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
6.
本文基于小波包技术的随机地震动模拟方法,提出一种改进的参数化随机近断层脉冲型地震动模拟方法。然后,通过识别和提取近断层脉冲型地震动数据库中脉冲型地震动的特征参数,建立了基于震源、传播路径和场地特征等参数的脉冲模型参数预测方程。最后,通过模拟实际记录和误差分析检验了改进的模拟方法的有效性。结果表明:应用改进的模拟方法得到的地震动时程无论在波形、频率特性还是峰值上均与实际记录具有较好的一致性。改进的模拟方法在保留地震动时频非平稳性的基础上,能够有效地提高近断层脉冲型地震动的模拟效果,并且能够很好地体现脉冲型地震动的主要特征。 相似文献
7.
The orientations of ground motions are paramount when the pulse‐like motions and their unfavorable seismic responses are considered. This paper addresses the stochastic modeling and synthesizing of near‐fault impulsive ground motions with forward directivity effect taking the orientation of the strongest pulses into account. First, a statistical parametric analysis of velocity time histories in the orientation of the strongest pulse with a specified magnitude and various fault distances is performed. A new stochastic model is established consisting of a velocity pulse model with random parameters and a stochastic approach to synthesize high‐frequency velocity time history. The high‐frequency velocity history is achieved by integrating a stochastic high‐frequency accelerogram, which is generated via the modified K‐T spectrum of residual acceleration histories and then modulated by the specific envelope function. Next, the associated parameters of pulse model, envelope function, and power spectral density are estimated by the least‐square fitting. Some chosen parameters in the stochastic model of near‐fault motions based on correlation analysis are regarded as random variables, which are validated to follow the normal or lognormal distribution. Moreover, the number theoretical method is suggested to select efficiently representative points, for generating artificial near‐fault impulsive ground motions with the feature of the strongest pulse, which can be used to the seismic response and reliability analysis of critical structures conveniently. Finally, the simulated ground motions demonstrate that the synthetic ground motions generated by the proposed stochastic model can represent the impulsive characteristic of near‐fault ground motions. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
8.
In damage‐based seismic design it is desirable to account for the ability of aftershocks to cause further damage to an already damaged structure due to the main shock. Availability of recorded or simulated aftershock accelerograms is a critical component in the non‐linear time‐history analyses required for this purpose, and simulation of realistic accelerograms is therefore going to be the need of the profession for a long time to come. This paper attempts wavelet‐based simulation of aftershock accelerograms for two scenarios. In the first scenario, recorded main shock and aftershock accelerograms are available along with the pseudo‐spectral acceleration (PSA) spectrum of the anticipated main shock motion, and an accelerogram has been simulated for the anticipated aftershock motion such that it incorporates temporal features of the recorded aftershock accelerogram. In the second scenario, a recorded main shock accelerogram is available along with the PSA spectrum of the anticipated main shock motion and PSA spectrum and strong motion duration of the anticipated aftershock motion. Here, the accelerogram for the anticipated aftershock motion has been simulated assuming that temporal features of the main shock accelerogram are replicated in the aftershock accelerograms at the same site. The proposed algorithms have been illustrated with the help of the main shock and aftershock accelerograms recorded for the 1999 Chi–Chi earthquake. It has been shown that the proposed algorithm for the second scenario leads to useful results even when the main shock and aftershock accelerograms do not share the same temporal features, as long as strong motion duration of the anticipated aftershock motion is properly estimated. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
9.
In ensuring structural safety against near-fault pulse-type ground motions it is of critical importance that sufficient recorded motions of this type are available and that suitable synthetic motions can be simulated for those situations where the recorded motions are insufficient or non-existent. To this end, an objective criterion is developed for the directivity pulse-type motions, to identify such motions from the available suite of recorded ground motions. This criterion is based on the value of maximum fractional signal energy contribution by any half-cycle of the velocity time-history. For the simulation of directivity pulse-type motions, it is proposed to estimate and superimpose directivity pulse(s) on a non-pulse type motion. An algorithm is developed to extract the directivity pulse features from a pulse-type accelerogram via its repetitive smoothening, and based on the pulses extracted from a database of 91 records two mathematical functions are proposed to model the directivity pulses. It is found that the amplitude and dominant Fourier period of the expected velocity pulse may be sufficient to generate the shapes of the expected acceleration and velocity pulses. 相似文献
10.
A modified method for simulating non-stationary multi-point earthquake ground motion 总被引：1，自引：1，他引：0
A spectral-representation-based algorithm is proposed to simulate non-stationary and stochastic processes with evolutionary power,according to a prescribed non-stationary cross-spectral density matrix. Non-stationary multi-point seismic ground motions at different locations on the ground surface are generated for use in engineering applications. First,a modified iterative procedure is used to generate uniformly modulated non-stationary ground motion time histories which are compatible with the prescribed power spectrum. Then,ground motion time histories are modeled as a non-stationary stochastic process with amplitude and frequency modulation. The characteristic frequency and damping ratio of the Clough-Penzien acceleration spectrum are considered as a function of time in order to study the frequency time variation. Finally,two numerical examples are presented to validate the efficiency of the proposed method,and the results show that this method can be effectively applied to the dynamic seismic analysis of long and large scale structures. 相似文献
11.
A parameterized stochastic model of near‐fault ground motion in two orthogonal horizontal directions is developed. The major characteristics of recorded near‐fault ground motions are represented. These include near‐fault effects of directivity and fling step; temporal and spectral non‐stationarity; intensity, duration, and frequency content characteristics; directionality of components; and the natural variability of ground motions. Not all near‐fault ground motions contain a forward directivity pulse, even when the conditions for such a pulse are favorable. The proposed model accounts for both pulse‐like and non‐pulse‐like cases. The model is fitted to recorded near‐fault ground motions by matching important characteristics, thus generating an ‘observed’ set of model parameters for different earthquake source and site characteristics. A method to generate and post‐process synthetic motions for specified model parameters is also presented. Synthetic ground motion time series are generated using fitted parameter values. They are compared with corresponding recorded motions to validate the proposed model and simulation procedure. The use of synthetic motions in addition to or in place of recorded motions is desirable in performance‐based earthquake engineering applications, particularly when recorded motions are scarce or when they are unavailable for a specified design scenario. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
12.
A method for generating a suite of synthetic ground motion time‐histories for specified earthquake and site characteristics defining a design scenario is presented. The method employs a parameterized stochastic model that is based on a modulated, filtered white‐noise process. The model parameters characterize the evolving intensity, predominant frequency, and bandwidth of the acceleration time‐history, and can be identified by matching the statistics of the model to the statistics of a target‐recorded accelerogram. Sample ‘observations’ of the parameters are obtained by fitting the model to a subset of the NGA database for far‐field strong ground motion records on firm ground. Using this sample, predictive equations are developed for the model parameters in terms of the faulting mechanism, earthquake magnitude, source‐to‐site distance, and the site shear‐wave velocity. For any specified set of these earthquake and site characteristics, sets of the model parameters are generated, which are in turn used in the stochastic model to generate the ensemble of synthetic ground motions. The resulting synthetic acceleration as well as corresponding velocity and displacement time‐histories capture the main features of real earthquake ground motions, including the intensity, duration, spectral content, and peak values. Furthermore, the statistics of their resulting elastic response spectra closely agree with both the median and the variability of response spectra of recorded ground motions, as reflected in the existing prediction equations based on the NGA database. The proposed method can be used in seismic design and analysis in conjunction with or instead of recorded ground motions. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
13.
The modeling of seismic load is a major topic that has to be addressed thoroughly in the framework of performance based seismic analysis and design. In this paper, a simple procedure for simulating artificial earthquake accelerograms matching the statistical distribution of response spectra, as given by median ground motion prediction equations, the standard deviation and correlation coefficients, is proposed. The approach follows the general ideas of the (natural) ground motion selection algorithms proposed by Baker [4] and Wang [43] but using simulated (artificial) “spectrum-compatible” accelerograms. This allows to simulate spectrum-compatible accelerograms featuring variability similar to the one of recorded accelerograms when the match of median and ±1 standard-deviation response spectra is imposed by the regulator. The procedure is illustrated by an application to the NGA ground motion data and models. 相似文献
14.
15.
Seismic risk analysis and mitigation of spatially extended structures require the synthesis of spatially varying ground motions in the response history analysis of these structures. These synthetic motions are usually desired to be spatially correlated, site reflected, nonstationary, and compatible with target design response spectra. In this paper, a method is presented for simulating spatially varying ground motions considering the nonstationarity, local site effects, and compatibility of response spectra. The scheme for generating spatially varying and response spectra compatible ground motions is first established for spatial locations on the ground surface with varying site conditions. The design response spectrum is introduced as the “power” spectrum at the base rock. The site amplification approach is then derived based on the deterministic wave propagation theory, by assuming that the base rock motions consist of out-of-plane SH wave or in-plane combined P and SV waves propagating into the site with assumed incident angles, from which tri-directional spatial ground motions can be generated. The phase difference spectrum is employed to model ground motions exhibiting nonstationarity in both frequency and time domains with different site conditions. The proposed scheme is demonstrated with numerical examples. 相似文献
16.
For the seismic analysis of complex or nonlinear extended structures, it is useful to generate a set of properly correlated earthquake accelerograms that are consistent with a specified seismic hazard. A new simulation approach is presented in this paper for the generation of ensembles of spatially correlated accelerograms such that the simulated motions are consistent with (i) a parent accelerogram in the sense of temporal variations in frequency content, (ii) a design spectrum in the mean sense, and (iii) with a given instantaneous coherency structure. The formulation is based on the extension of stochastic decomposition technique to wavelet domain via the method of spectral factorization. A complex variant of the modified Littlewood-Paley wavelet function is proposed for the wavelet-based representation of earthquake accelerograms, such that this explicitly brings out the phase information of the signal, besides being able to decompose it into component time-histories having energy in non-overlapping frequency bands. The proposed approach is illustrated by generating ensembles of accelerograms at four stations. 相似文献
17.
基于欧美规范确定了坐落在深厚覆盖层上KH抽水蓄能电站上、下库场地基本运行和最大设计地震动峰值加速度、反应谱和时程等动参数。首先依据场地区域地震烈度区划图、特征周期区划图和依据场地地质地震条件选取的5条种子实测地震动确定场地基岩输入加速度时程、峰值加速度和设计反应谱,进而基于各土层地质参数和一维弹性波传播模拟程序确定覆盖层表面的平均峰值加速度、平均反应谱和5条地震动时程,对所得到的平均反应谱和峰值加速度进行光滑处理后确定可用于各建筑物结构抗震设计的地震动参数,包括覆盖层表面水平向动力响应加速度时程、峰值加速度和设计反应谱。该方法可较好地保留输入地震动的真实动力特性,如持时、相位和频率等,为我国规范中建议的确定场地地震动参数的方法提供有益的补充。 相似文献
18.
Displacement response spectrum (DRS), as the input, is of great significance to the displacement-based design just like the acceleration response spectrum to the traditional force-based design. Although the procedure of performance-based, in particular the displacement-based design has achieved considerable development, there is not a general DRS covering an enough long period range for common seismic design yet. This paper develops a systematic ground motion data processing procedure for the purpose of correcting the noise in the earthquake records and generating consistent DRS for seismic design. An adaptive algorithm is proposed to determine the cutoff frequency of the high-pass digital filter. The DRS of more than 500 recorded earthquake ground motions are generated and they are classified into three groups according to the ratio of the peak ground acceleration to the peak ground velocity (A/V) and/or the ratio of the peak ground velocity to the peak ground displacement (V/D). In each group, all the ground motions are normalized with respect to a selected scaling factor. Their corresponding DRS are obtained and then averaged to get the mean and standard deviation DRS, which can be used for both deterministic and probabilistic displacement-based design. 相似文献
19.
在传统地震动反应谱频域拟合方法的基础上,提出了拟合加密控制点目标反应谱的地震动合成方法,并在此基础上利用实际算例与传统方法进行了对比.本文方法在每次迭代调整过程中均考虑了对地震动加速度强度包络函数的模拟,并且对调整后的地震动进行了基线校正,从而确保最终合成的地震动时程既能以一定精度拟合加密目标反应谱,又能满足目标包络函数的要求,同时保证积分所得位移曲线不产生基线漂移.数值算例分析结果表明,本文方法与传统非加密控制点目标谱拟合方法相比,在地震动时程曲线合成、反应谱拟合精度以及收敛速度等方面均具有一定的优势. 相似文献
20.
为了进一步提高人造地震动时程对目标反应谱的拟合精度和效率,本文提出了一种人造地震动反应谱非线性拟合方法.在人造地震动反应谱非线性拟合过程中,认为Fouricr幅值谱与反应谱调整项之间满足非线性(幂指数)关系.通过比例拉伸和折叠等数值技巧以促使模拟加速度向目标加速度逼近.算例分析结果表明,人造地震动反应谱非线性拟合方法具... 相似文献