首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 790 毫秒
1.
A polycrystalline specimen of clinopyroxene diopside has been hot-pressed at P = 15 kbar and T = 850°C in a piston-cylinder apparatus. Compressional (νP) and shear (νS) velocities are determined as a function of pressure to 7.5 kbar at room temperature by an ultrasonic pulse transmission technique. The velocities at 7.5 kbar are νP = 8.06 km/sec and νS = 4.77 km/sec. These data are consistent with velocity-density trends for orthopyroxenes due to the compensating effects of the monoclinic structure (positive) and Ca content (negative). With the addition of the new data for diopside, it is possible to calculate directly the velocities of various upper-mantle mineral assemblages.  相似文献   

2.
Ultrasonic data for the velocities of SiO2-stishovite have been determined as a function of pressure to 10 kbar at room temperature for polycrystalline specimens hot-pressed at pressures P = 120kbar and temperatures T = 900°C. These cylindrical specimens are 2 mm in diameter and 0.9–1.4 mm long and have a grain size less than 10 μm. Compressional and shear wave velocities were measured both parallel and perpendicular to the axis of pressing and were found to be isotropic at 10 kbar with νp = 11.0 ± 0.2km/sec andνs = 6.9 ± 0.3km/sec; this shear velocit is substantially higher than that of Mizutani et al. (1972) perhaps due to the presence of crack orientations in their specimen which affected νs but not νp. The Murnaghan P-V trajectories calculated from the ultrasonic data [bulk modulus Ks = 2.5 ± 0.3Mbar and assuming (?Ks/?P)T = 6 ± 2] are consistent with recent hydrostatic compression data and with the shock wave compression data above 600 kbar. The combined evidence from the data of the ultrasonic and hydrostatic compression techniques suggests that the most probable value of the bulk modulus of stishovite at zero pressure is close to the upper limit of the uncertainty of our ultrasonically determined value, K0 = 2.7?2.8Mbar. Elasticity data for rutile-type oxides are not compatible with normal Ks-V0 systematics perhaps due to the neglect of non-central forces in the lattice model. These new stishovite data would make it impossible to satisfy the elasticity-density data of the lower mantle using an oxide mixture with either olivine or pyroxene stoichiometry.  相似文献   

3.
Ultrasonic data for the velocities of the ilmenite and perovskite polymorphs of CdTiO3 have been determined as a function of pressure to 7.5 kbar at room temperature for polycrystalline specimens hot-pressed at pressures up to 25 kbar. This transition is characterized by the following velocity (ν)-density (?) relationships: (1) the changes in compressional (νp) and bulk sound (ν?) velocities are comparable in percentage magnitude to the density jump, while the shear (νs) velocity jump is three times greater than that for ?; (2) (νp/νs) decreases across the transition from the low- to high-pressure phase; and (3) low slopes (linear or logarithmic) on ν-? diagrams. The (νp/νs) behaviour for the ilmenite-perovskite transformation is unusual for the transitions studied in our laboratory. The observed relationships (1) and (2) are typical of the elasticity behaviour across phase transformations which involve increases in cation-anion co-ordination and in nearest-neighbour interatomic distances, such as those exhibited by CdTiO3 in transforming from the ilmenite to the perovskite phase. Elasticity systematics for isostructural sequences are used to estimate the bulk moduli of the perovskite polymorphs of CaSiO3 (2.7 Mbar) and MgSiO3 (2.8 Mbar).  相似文献   

4.
Rocks ranging in composition from trondhjemite to diorite (plagiogranites) have been recovered from ocean ridges and are common constituents of ophiolites. Velocities and densities of diorite and trondhjemite from the Mid-Atlantic Ridge are shown to differ significantly from similar properties of metadolerite and gabbro. Compressional (Vp) and shear (Vs) velocities of plagiogranites are relatively low (Vp = 4.78–5.91km/s at1kbar,Vs = 2.81–3.37km/s at1kbar), as are densities (2.57–2.64 g/cm3) and Poisson's ratios (0.24–0.27). These data lend strong support to the probable existence of a low-velocity/density zone within layer 3 of the oceanic crust. Based on observations in ophiolites, it is postulated that this zone can be up to 1 km in thickness and is laterally discontinuous.  相似文献   

5.
Compressional (Vp) and shear (Vs) wave velocities have been measured to 10 kb in 32 cores of basalt from 14 Pacific sites of the Deep Sea Drilling Project. Both VpandVs show wide ranges (3.70to6.38km/sec forVpand1.77to3.40km/sec forVsat0.5kb) which are linearly related to density and sea floor age, confirming earlier findings by Christensen and Salisbury of decreasing velocity with progressive submarine weathering based on studies of basalts from five sites in the Atlantic. Combined Pacific and Atlantic data give rates of decreasing velocity of ?1.89and?1.35km/sec per100my forVpandVs respectively. New analyses of oceanic seismic refraction data indicate a decrease in layer 2 velocities with age similar to that observed in the laboratory, suggesting that weathering penetrates to several hundred meters in many regions and is largely responsible for the extreme range and variability of layer 2 refraction velocities.  相似文献   

6.
We model the internal structure of the Moon, initially homogeneous and later differentiated due to partial melting. The chemical composition and the internal structure of the Moon are retrieved by the Monte-Carlo inversion of the gravity (the mass and the moment of inertia), seismic (compressional and shear velocities), and petrological (balance equations) data. For the computation of phase equilibrium relations and physical properties, we have used a method of minimization of the Gibbs free energy combined with a Mie-Gr@uneisen equation of state within the CaO-FeO-MgO-Al2O3-SiO2 system. The lunar models with a different degree of constraints on the solution are considered. For all models, the geophysically and geochemically permissible ranges of seismic velocities and concentrations in three mantle zones and the sizes of Fe-10%S core are estimated. The lunar mantle is chemically stratified; different mantle zones, where orthopyroxene is the dominant phase, have different concentrations of FeO, Al2O3, and CaO. The silicate portion of the Moon (crust + mantle) may contain 3.5–5.5% Al2O3 and 10.5–12.5% FeO. The chemical boundary between the middle and the lower mantle lies at a depth of 620–750 km. The lunar models with and without a chemical boundary at a depth of 250–300 km are both possible. The main parameters of the crust, the mantle, and the core of the Moon are estimated. At the depths of the lower mantle, the P and S velocities range from 7.88 to 8.10 km/s and from 4.40 to 4.55 km/s, respectively. The radius of a Fe-10%S core is 340 ± 30 km.  相似文献   

7.
Adakitic rocks in continental settings are commonly considered to be formed by partial melting of thickened or delaminated lower crust. Investigations on this kind of rocks can provide important information about crustal evolution complementary to information from other rocks. This paper reports adakitic granodiorite of the Lingxi pluton in the interior of the Cathayisa Block. LA-ICP-MS zircon U-Pb dating shows that it was formed in the late Early Cretaceous(100±1 Ma). The granodiorite has geochemical features of adakitic rocks derived from partial melting of the thickened lower crust, e.g., high SiO2(mainly ranging from 64.4 to 68.9 wt.%) and Sr(624–894 ppm) contents, Sr/Y(49.9–60.8) and La/Yb(23.4–42.8) values, low Y(10.3–17.1 ppm), Ni(5.62–11.8 ppm) and MgO(mostly from 0.86 wt.% to 1.57 wt.%) contents and weak Eu anomaly. It has initial 87Sr/86 Sr ratios of 0.7086–0.7091, εNd(t) values of.6.2 to.5.9 and zircon εHf(t) values mostly of.10.1 to.7.6. Based on the geochemical characteristics and simple modelling, it is suggested that the most likely generation mechanism of the Lingxi granodiorite is partial melting of a thickened Proterozoic lower continental crust at a pressure ≥12 kbar(or crust thickness ≥40km), leaving a garnet-bearing amphibolite residue. Combining our results and previous studies of the tectonic evolution of the Cathaysia Block, we propose that the crust was thickened to over 40 km by a compressive event occurring during the late Early Cretaceous, which is supported by the observation that there is an angular unconformity between the Upper Cretaceous Series and the early Lower Cretaceous or the Jurassic rocks. After this event, the Cathaysia Block experienced a lithospheric extension and thinning probably driven by the high-angle paleo-Pacific subduction. With the attenuation of lithosphere, the lower crust was heated to partial melting by upwelling asthenospheric materials, resulting in generation of the Lingxi granodiorite and other coeval granitoids in the Cathaysia Block. This study provides new information on the crustal evolution of the Cathaysia Block during the Early Cretaceous.  相似文献   

8.
Inversion of local earthquake travel times and joint inversion of receiver functions and Rayleigh wave group velocity measurements were used to derive a simple model for the velocity crustal structure beneath the southern edge of the Central Alborz (Iran), including the seismically active area around the megacity of Tehran. The P and S travel times from 115 well-located earthquakes recorded by a dense local seismic network, operated from June to November 2006, were inverted to determine a 1D velocity model of the upper crust. The limited range of earthquake depths (between 2 km and 26 km) prevents us determining any velocity interfaces deeper than 25 km. The velocity of the lower crust and the depth of the Moho were found by joint inversion of receiver functions and Rayleigh wave group velocity data. The resulting P-wave velocity model comprises an upper crust with 3 km and 4 km thick sedimentary layers with P wave velocities (Vp) of ～5.4 and ～5.8 km s?1, respectively, above 9 km and 8 km thick layers of upper crystalline crust (Vp ～6.1 and ～6.25 km s?1 respectively). The lower crystalline crust is ～34 km thick (Vp ～ 6.40 km s?1). The total crustal thickness beneath this part of the Central Alborz is 58 ± 2 km.  相似文献   

9.
Modeling of multimode surface wave group velocity dispersion data sampling the eastern and the western Ganga basins, reveals a three layer crust with an average Vs of 3.7 km s?1, draped by ～2.5 km foreland sediments. The Moho is at a depth of 43 ± 2 km and 41 ± 2 km beneath the eastern and the western Ganga basins respectively. Crustal Vp/Vs shows a felsic upper and middle crust beneath the eastern Ganga basin (1.70) compared to a more mafic western Ganga basin crust (1.77). Due to higher radiogenic heat production in felsic than mafic rocks, a lateral thermal heterogeneity will be present in the foreland basin crust. This heterogeneity had been previously observed in the north Indian Shield immediately south of the foreland basin and must also continue northward below the Himalaya. The high heat producing felsic crust, underthrust below the Himalayas could be an important cause for melting of midcrustal rocks and emplacement of leucogranites. This is a plausible explanation for abundance of leucogranites in the east-central Himalaya compared to the west. The uppermost mantle Vs is also significantly lower beneath the eastern Ganga basin (4.30 km s?1) compared to the west (4.44 km s?1).  相似文献   

10.
Two-dimensional crustal velocity models are derived from passive seismic observations for the Archean Karelian bedrock of north-eastern Finland. In addition, an updated Moho depth map is constructed by integrating the results of this study with previous data sets. The structural models image a typical three-layer Archean crust, with thickness varying between 40 and 52 km. P wave velocities within the 12–20 km thick upper crust range from 6.1 to 6.4 km/s. The relatively high velocities are related to layered mafic intrusive and volcanic rocks. The middle crust is a fairly homogeneous layer associated with velocities of 6.5–6.8 km/s. The boundary between middle and lower crust is located at depths between 28 and 38 km. The thickness of the lower crust increases from 5–15 km in the Archean part to 15–22 km in the Archean–Proterozoic transition zone. In the lower crust and uppermost mantle, P wave velocities vary between 6.9–7.3 km/s and 7.9–8.2 km/s. The average Vp/Vs ratio increases from 1.71 in the upper crust to 1.76 in the lower crust.The crust attains its maximum thickness in the south-east, where the Archean crust is both over- and underthrust by the Proterozoic crust. A crustal depression bulging out from that zone to the N–NE towards Kuusamo is linked to a collision between major Archean blocks. Further north, crustal thickening under the Salla and Kittilä greenstone belts is tentatively associated with a NW–SE-oriented collision zone or major shear zone. Elevated Moho beneath the Pudasjärvi block is primarily explained with rift-related extension and crustal thinning at ∼2.4–2.1 Ga.The new crustal velocity models and synthetic waveform modelling are used to outline the thickness of the seismogenic layer beneath the temporary Kuusamo seismic network. Lack of seismic activity within the mafic high-velocity body in the uppermost 8 km of crust and relative abundance of mid-crustal, i.e., 14–30 km deep earthquakes are characteristic features of the Kuusamo seismicity. The upper limit of seismicity is attributed to the excess of strong mafic material in the uppermost crust. Comparison with the rheological profiles of the lithosphere, calculated at nearby locations, indicates that the base of the seismogenic layer correlates best with the onset of brittle to ductile transition at about 30 km depth.We found no evidence on microearthquake activity in the lower crust beneath the Archean Karelian craton. However, a data set of relatively well-constrained events extracted from the regional earthquake catalogue implies a deeper cut-off depth for earthquakes in the Norrbotten tectonic province of northern Sweden.  相似文献   

11.
The Baikal is a deep long and narrow basin in East Siberia which follows a huge fault zone adjoining the Siberian Platform. The basin was formed by rapid subsidence of continental crust during the pas 3–4 Ma. It is bounded by normal faults which indicate extension of the crust during the subsidence. According to seismic reflection profiling data, the intensity of extension is not large (3–7%). It is much smaller than the thinning of the crystalline crust under the basin (up to 38%). The thinning and crustal subsidence can be explained by the transformation of gabbro in the lower crust into dense garnet granulites. The latter rocks (with Vp 7.7−7.8 km/sec) are still located under the remnant part of the crust. Rapid transformation took place due to an inflow of catalyzing fluid along the fault zone from the asthenospheric upwelling. This upwelling, which is at a depth of 80–90 km, caused a general uplift of a broad area in the south of East Siberia.  相似文献   

12.
We performed a receiver function analysis on teleseismic data recorded along two 550 km-long profiles crossing the northeastern Tibetan plateau. Results from time to depth migration, grid-search Vp/Vs determination and simulated annealing inversion of waveforms, reveal that the crust thickens from ∼50 km near the northern edge of the plateau to ∼80 km south of the Jinsha suture in the Qiang Tang block. Crustal thickening occurs in staircase fashion with steps located beneath the main, reactivated sutures. The Vp/Vs ratio, close to the global continental average does not suggest widespread partial melting but rather a more usual separation between an upper felsic and a lower mafic part within the northeastern Tibetan crust.  相似文献   

13.
In order to investigate crustal structure beneath the eastern Marmara region, a seismic refraction survey was conducted across the North Anatolian Fault (NAF) zone in north west Turkey. Two reversed profiles across two strands of the NAF zone were recorded in the Armutlu Highland where a tectonically active region was formed by different continents. We used land explosions in boreholes and quarry blasts as seismic sources. A reliable crustal velocity and depth model is obtained from the inversion of first arrival travel times. The velocity-depth model will improve the positioning of the earthquake activities in this active portion of the NAF. A high velocity anomaly (5.6–5.8 km s−1) in the central highland of Armutlu block and the low velocity (4.90 km s−1) pattern north of Iznik Lake are the two dominant features. The crustal thickness is about 26 ± 2 km in the north and increases to about 32 ± 2 km beneath the central Armutlu block in the south. P-wave velocities are about 3.95 km s−1 to 4.70 km s−1 for the depth range between about 1 km and 5 km in the upper crust. The eastern Marmara region has different units of upper crust with velocities varying with depth to almost 8 km. The high upper crust velocities are associated with Armutlu metamorphic rocks, while the low velocity anomalies are due to unconsolidated sedimentary sequences. The western side of Armutlu block has complex tectonics and is well known for geothermal sources. If these sources are continuous throughout the portions of the crust, it may be associated with a granitic intrusion and deformation along the NAF zone. That is, the geothermal sources associated with the low velocity may be due to the occurrence of widespread shear heating, even shear melting. The presence of shear melting may indicate the presence of crustal fluid imposed by two blocks of the NAF system.  相似文献   

14.
The granulite facies assemblages of the anorthositic rocks of the Bergen Arcs (stable at 800–900°C and 10 kbar) have been transformed to eclogite facies assemblages (stable at 700–750°C and 16–19 kbar) in the vicinity of Caledonian shear zones. This section of the root zone of the Caledonian mountain chain reveals a deep polymetamorphic crust where Precambrian granulites (mean density 3.02 g/cm3) and Caledonian eclogites (mean density 3.19 g/cm3) alternate on a scale of meters over a minimum area of 3 × 12 km. Detailed mapping of three localities shows that eclogites account for up to 30–45% of the rock volume. The stabilitization of the eclogite mineralogy is controlled by fluids penetrating these deep crustal shear zones. The eclogitization is independent of preexisting compositional variation in this anorthosite-norite complex. The Bergen Arcs example suggests that the amount of eclogite versus granulites in the lowermost crust is a function of deformation and fluid access, rather than being controlled byT, P and rock composition alone. These relationships may explain the gradual increase in seismic velocity observed in some deep crustal sections and also the complex reflection pattern obtained from the lowermost crust in many areas.  相似文献   

15.
Attenuation of High-Frequency Seismic Waves in Eastern Iran   总被引：1，自引：0，他引：1  
We investigated the frequency-dependent attenuation of the crust in Eastern Iran by analysis data from 132 local earthquakes having focal depths in the range of 5–25 km. We estimated the quality factor of coda waves (Q c) and body waves (Q p and Q s) in the frequency band of 1.5–24 Hz by applying the single backscattering theory of S-coda envelopes and the extended coda-normalization method, respectively. Considering records from recent earthquakes (Rigan M w 6.5, 2010/12/20, Goharan M w 6.2, 2013/5/11 and Sirch M w 5.5, 2013/1/21), the estimated values of Q c, Q p and Q s vary from 151 ± 49, 63 ± 6, and 93 ± 14 at 1.5 Hz to 1,994 ± 124, 945 ± 84 and 1,520 ± 123 at 24 Hz, respectively. The average frequency-dependent relationships (Q = Q o f n ) estimated for the region are Q c = (108 ± 10)f (0.96±0.01), Q p = (50 ± 5)f (1.01±0.04), and Q s = (75 ± 6)f (1.03±0.06). These results evidenced a frequency dependence of the quality factors Q c, Q p, and Q s, as commonly observed in tectonically active zones characterized by a high degree of heterogeneity, and the low value of Q indicated an attenuative crust beneath the entire region.  相似文献   

16.
A new method of reconstruction of the temperature profile in the lunar mantle from the velocities of seismic P- and S-waves for different models of chemical composition is developed. The procedure of the solution of an inverse problem is realized with the help of the minimization of the Gibbs free energy and the equations of state of a mantle substance, taking into account phase transformations, anharmonicity, and the effects of inelasticity. The geophysical and geochemical constraints on composition and temperature distribution in Moon’s mantle are established. The upper mantle can be composed of olivine pyroxenite, depleted by low-volatile oxides (∼2 wt % of CaO and Al2O3). On the contrary, the lower mantle must be enriched by low-volatile oxides (∼4–6 wt % of CaO and Al2O3). Its composition can be represented by a mineral association of the olivine + clinopyroxene + garnet or olivine + orthopyroxene + clinopyroxene + garnet type, which is close in composition to pyrolite. The temperature distribution at depths 50–1000 km are approximated by the equation: T(°C) = 351 + 1718[1–exp (−0.00082H)]. The constraints inferred make it possible to conclude that the published values of the velocities of P- and S-waves for the lunar mantle, obtained by processing the data of seismic experiments of the Apollo lunar mission are inconsistent with each other at depths below 300 km. Otherwise, the variations in the velocities of P- and S-waves disturb the symmetry between the petrological model (composition), the temperature profile, and the seismic profile.  相似文献   

17.
The P- and S-wave receiver functions and dispersion curves of the fundamental Rayleigh wave are used to study the lithosphere within the Central Anatolian Plateau. The results for eight broadband seismic stations are presented. It is established that within the plateau, the crust with a thickness of about 35 km is underlain by the mantle lid with its bottom at a depth of about 60 km. The velocities of longitudinal (Vp) and shear (Vs) waves in this layer are at most 7.6 and 4.5 km/s, respectively, and the Vp/Vs ratio is close to 1.7 (i.e., by 6% lower than in the standard IASP91 and PREM models). Such a low velocity ratio is characteristic of rocks having high orthopyroxene content. Beneath the high-velocity mantle lid, the S-wave velocity decreases to 4.0–4.2 km/s and the Vp/Vs ratio is close to its standard value (1.8). At most stations, the P-wave receiver functions do not contain seismic phase P410s, which is formed at the global seismic boundary at a depth of 410 km. The seismic boundary at a depth of 410 km is related to the olivine-spinel phase transformation, and its absence can indicate the anomalously low olivine content and high basalt content. This anomaly is probably associated with the subduction of a large amount of oceanic crust during the closure of the Tethys. The results of the study overall indicate the high informativity of the used method.  相似文献   

18.
Ultrasonic data for the velocities of a large number of perovskite-structure compounds have been determined as a a function of pressure to 6 kbar at room temperature for polycrystalline specimens hot-pressed at pressures up to 100 kbar in solid-media devices: ScAlO3, GdAlO3, SmAlO3, EuAlO3, YAlO3, CdTiO3, CdSnO3, CaSnO3 and CaGeO3. The elasticity data for these orthorhombic and cubic perovskites define systematic patterns on bulk modulus (KS)-volume (VO) and bulk sound velocity (υφ—mean atomic weight (M) diagrams which are insensitiv to the details of cation chemistry and crystallographic structure. These isostructural trends are used to estimate KS = 2.5 ± 0.3 Mbar and υφ = 7.9 ± 0.4 km/s for the perovskite polymorph of MgSiO3. On a Birch diagram of veloc vs. density, the perovskite data define linear trends which lead to erroneous estimates of velocity for MgSiO3 unless specific account is taken of ionic radius effects in isomorphic substitutions.  相似文献   

19.
  相似文献   

20.
Ultrasonic data for the velocities of the ilmenites MgTiO3 and CoTiO3 have been determined as a function of pressure to 7.5 kbar at room temperature for polycrystalline specimens hot-pressed in a piston-cylinder apparatus at pressures up to 30 kbar. Titanate and germanate ilmenites define divergent isostructural trends on a Birch diagram of bulk sound velocity (υφ) vs. density (ρ). On a υφ vs. mean atomic weight (M) diagram, however, all of the ilmenite consistent with a single υφM12 = constant trend. Elasticity systematics for isostructural sequences are used to e the bulk modulus (2.09 Mbar) and bulk sound velocity (7.4 km/sec) of MgSiO3-elmenite.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号