共查询到20条相似文献，搜索用时 15 毫秒
1.
通过对水口水电站重力坝强震反应台站在古田地震中获取的强震反应观测资料进行信噪比、反应谱和功率谱分析,得到如下结论:①大坝在0.7～15 Hz频率段的振动特性较为可信;②坝基和自由场输入地震动富于高频,峰值加速度反应谱存在较大差异;③坝基输入地震动存在差异性,建议今后此类大坝抗震设计时考虑多点地震动输入;④单个卓越频率携带的能量对反应谱影响不大,反应谱是和输入地震动总能量相关的;⑤坝体刚度较大,此次地震中还处于线弹性状态。初步了解了强震记录的地震动特性和大坝结构的抗震性能,对认识水库地震近场地震动特性和重力坝地震反应有一定的参考意义。 相似文献
2.
The effect of the upper part of a layered profile on calculated seismic hazard parameters is analyzed. The behavior of the soil profile is studied as part of equivalent linear modeling with the example of six seismogeological models. Peak ground acceleration of the input signal varies from 0.1 to 0.6 g. It is shown that the character of the dependence of physicomechanical properties in the layer on the strain value leads to variations in the amplitudes of the response spectrum on the free surface and displacement of the maximum of the frequency spectrum. An increase in the thickness of the upper layer significantly influences the shape of the response spectra. Variations in the PGA values, damping coefficients, strain values with depth are calculated, as well as the velocity profiles for different soil layers with respect to the degradation curves. It is demonstrated that restricting the upper limit of the damping coefficient to 15% does not lead to noticeable changes in the shape of the response spectra on the free surface. The soil column begins to decrease the peak value of the input signal when its level exceeds 0.3 g. 相似文献
3.
Nonstationary stochastic response of structural systems equipped with nonlinear viscous dampers under seismic excitation 总被引：1，自引：0，他引：1 
下载免费PDF全文
下载免费PDF全文 Nonlinear viscous dampers are supplemental devices widely used for enhancing the performance of structural systems exposed to seismic hazard. A rigorous evaluation of the effect of these damping devices on the seismic performance of a structural system should be based on a probabilistic approach and take into account the evolutionary characteristics of the earthquake input and of the corresponding system response. In this paper, an approximate analytical technique is proposed for studying the nonstationary stochastic response characteristics of hysteretic single degree of freedom systems equipped with viscous dampers subjected to a fully nonstationary random process representing the seismic input. In this regard, a stochastic averaging/linearization technique is utilized to cast the original nonlinear stochastic differential equation of motion into a simple first‐order nonlinear ordinary differential equation for the nonstationary system response variance. In comparison with standard linearization schemes, the herein proposed technique has the significant advantage that it allows to handle realistic seismic excitations with time‐varying frequency content. Further, it allows deriving a formula for determining the nonlinear system response evolutionary power spectrum. By this way, ‘moving resonance’ effects, related to both the evolutionary seismic excitation and the nonlinear system behavior, can be observed and quantified. Several applications involving various system and input properties are included. Furthermore, various response parameters of interest for the seismic performance assessment are considered as well. Comparisons with pertinent Monte Carlo simulations demonstrate the reliability of the proposed technique. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
4.
Deterministic Earthquake Scenarios for the City of Sofia 总被引：3，自引：0，他引：3
S. Slavov I. Paskaleva M. Kouteva F. Vaccari G. F. Panza 《Pure and Applied Geophysics》2004,161(5-6):1221-1237
— The city of Sofia is exposed to a high seismic risk. Macroseismic intensities in the range of VIII – X (MSK) can be expected in the city. The earthquakes that can influence the hazard in Sofia originate either beneath the city or are caused by seismic sources located within a radius of 40 km. The city of Sofia is also prone to the remote Vrancea seismic zone in Romania, and particularly vulnerable are the long-period elements of the built environment. The high seismic risk and the lack of instrumental recordings of the regional seismicity make the use of appropriate credible earthquake scenarios and ground-motion modelling approaches for defining the seismic input for the city of Sofia necessary. Complete synthetic seismic signals, due to several earthquake scenarios, were computed along chosen geological profiles crossing the city, applying a hybrid technique, which combines the modal summation technique and finite differences. The modelling takes into account simultaneously the geotechnical properties of the site, the position and geometry of the seismic source and the mechanical properties of the propagation medium. Acceleration, velocity and displacement time histories and related quantities of earthquake engineering interest (e.g., response spectra, ground-motion amplification along the profiles) have been supplied. The approach applied in this study allows us to obtain the definition of the seismic input at low cost, exploiting large quantities of existing data (e.g. geotechnical, geological, seismological). It may be efficiently used to estimate the ground motion for the purposes of microzonation, urban planning, retrofitting or insurance of the built environment, etc. 相似文献
5.
This note is an extension of earlier works that presented probability distribution functions for amplitudes of the peaks (the highest, the second highest … the m-th highest) in response of deterministic single degree-of-freedom (SDOF) and multi degree-of-freedom (MDOF) structures to ground motion, with deterministic Fourier spectrum and duration. It shows how these probability distribution functions can be evaluated if the Fourier spectrum and duration of the excitation are random variables specified via distribution functions. Two cases are considered: (l) when the structural model is deterministic, and (2) when the modal frequencies are random variables. The procedure presented here approximates the transfer function of the structural response by Dirac delta functions at the modal frequencies, and is applicable to multi-storey buildings with small modal damping, and with natural frequencies that are not too close. The resulting probability distribution functions are needed in seismic hazard calculations of peak response amplitudes of SDOF and MDOF structures that will not be exceeded with given confidence during the service time of the structure from any earthquake at all known faults within certain distance from the structure. 相似文献
6.
A fundamental tool in seismic risk assessment of transportation systems is the fragility curve, which describes the probability that a structure will reach or exceed a certain damage state for a given ground motion intensity. Fragility curves are usually represented by two‐parameter (median and log‐standard deviation) cumulative lognormal distributions. In this paper, a numerical approach, in the spirit of the IDA, is applied for the development of fragility curves for highways and railways on embankments and in cuts due to seismic shaking. The response of the geo‐construction to increasing levels of seismic intensity is evaluated using a 2D nonlinear finite element model, with an elasto‐plastic criterion to simulate the soil behavior. A calibration procedure is followed in order to account for the dependency of both the stiffness and the damping to the soil strain level. The effect of soil conditions and ground motion characteristics on the response of the embankment and cut is taken into account considering different typical soil profiles and seismic input motions. This study will provide input for the assessment of the vulnerability of the road/railway network regarding the performance of the embankments and cuts; therefore, the level of damage is described in terms of the permanent ground displacement in these structures. The fragility curves are estimated based on the evolution of damage with increasing earthquake intensity, which is described by PGA. The proposed approach allows the evaluation of new fragility curves considering the distinctive features of the element's geometry, the input motion, and the soil properties as well as the associated uncertainties. A relationship between the computed permanent ground displacement on the surface of the embankment and the PGA in the free field is also suggested based on the results of the numerical analyses. Finally, the proposed fragility curves are compared with existing empirical data and the limitations of their applicability are outlined. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
7.
The object of this paper is to introduce a procedure for the determination of elastic design earthquake input energy spectra taking into account the influence of magnitude, soil type and distance from the surface projection of the fault. Firstly, an accurate selection of a large set of representative records has been realized. Secondly, the construction of the design input energy spectra has required determining the spectral shapes and a normalization factor which measures seismic hazard in terms of energy. This factor, denoted as the seismic hazard energy factor, has been defined as the area under the earthquake input energy spectrum in the period interval between 0·05 and 4·0 s. Finally, due to the importance of the source-to-site distance in the evaluation of the input energy, an investigation into the attenuation of the seismic hazard energy factor has been carried out. © 1998 John Wiley & Sons, Ltd. 相似文献
8.
场地放大效应的估计 总被引：2，自引：0，他引：2
本利用唐山地区9个台站得到的13次近场地震记录分析了场地放大效应，其中一些站位于废弃的地下煤矿坑道内，最深的一个台站在地下822m处，首先检验确定了地面反射波对地下场地的入射波没有很大影响，在后利用地下基岩场地台站（－822m)作参考场地，用线性反演法来同时分离震源，传播途径和局部场地效应，结果发现：在1至10Hz的频段上S波品质因子Qs基本上与频率成正比；与以地面基岩场地作参考场地所得的结果相比较，地面基岩场地的反应并不是一常数，它在大于6Hz的高频段上有明显的放大作用，在本的研究事件中，在6至10Hz的频段上这个放大纱数约为2至4。这表明由于地面基岩场地本身的放大作用，将导致在作场地震动预测时会低估地震作用，最后采用一种新的非参考场地法，即遗传算法，用w^2震源模型来估计绝对场地效应。在本的研究结果中，对大多数台站场地来说，所得的绝对场地应应与以地下基岩台站作参考场地所得的相对场地效应十分一致。这表明这作场地震动分析时，当仔细考虑了反射波对入射波的影响后，地下或井下基岩场地是比地面基岩场地更合适的参考场地。 相似文献
9.
时-频反应谱是地震动幅值、频谱和持时三要素构成的空间三维谱.基于此,本文提出归一化时-频反应谱定义与计算方法,计算三条典型地震波的归一化时-频反应谱,对比分析表明:不同地震记录的时-频反应谱的幅值在时间和周期两个轴上的分布差别很大,具有不同时-频反应谱的地震波可能对结构地震响应产生不同影响;对12层钢筋混凝土框架结构模型进行弹塑性时程分析,通过结构地震反应、结构损伤曲线与输入地震动的归一化时-频反应谱对比,发现结构最大反应并不一定是造成结构倒塌的直接原因,用结构弹性阶段反应最大值进行抗震设计存在一定局限性,从而证明归一化时-频反应谱可有效用来分析地震动特性和结构破坏机理. 相似文献
10.
采用Shake 2000程序,以Turkey Flat试验场地为模型,通过输入不同类型下多种强度的地震波,计算研究多工况下剪切波速测试标准差对地表加速度反应谱和峰值加速度的影响。结论为:(1)浅硬场地上剪切波速测试标准差对地震动的影响很大,影响程度与输入地震波的强度和频率以及场地剪切波速计算值有关;(2)如果将反应谱残差大于20%或加速度峰值差别大于20%定义为统计意义上的不可忽略,那么剪切波速测试标准差对计算结果的影响在大多数情况下均不可忽略;(3)当输入波的卓越周期与场地特征周期接近时,浅硬场地上剪切波速测试标准差引起的反应谱变化非常显著;(4)只有当输入波的卓越周期与场地特征周期相差较大且输入波强度偏小时,剪切波速测试标准差引起的反应谱变化才可略去;(5)当浅硬场地上剪切波速实测结果低于统计均值时,地震动计算结果的偏差一般明显大于剪切波速实测结果,高于统计均值时引起的偏差,且地震输入越强表现越明显。 相似文献
11.
This paper presents a series of analyses for the evaluation of the ground response of two NEHRP class D sites, subjected to shaking by a large number of strong ground-motion records. The two investigated sites have very distinct profiles, but they are characterised by almost identical Vs30 values. The site response analyses are performed using various methods of analysis and input parameters in order to explore the sensitivity of the ground response estimates and to identify the dominating parameters. Equivalent linear analysis is performed using different sets of dynamic soil properties curves, while nonlinear analysis is performed using different target dynamic soil curves, viscous damping formulations and fitting procedures for the constitutive model parameters. Particular focus is given to the sensitivity of the response when soil sites are subjected to high-intensity shaking, a subject of particular interest when the prediction of surface ground motions with low annual probabilities of exceedance is the target of probabilistic seismic hazard analyses (PSHA). The site response analysis results of this paper are incorporated into the probabilistic framework of Bazzurro and Cornell [1] in our companion paper in order to assess their impact on the final soil surface hazard calculation. 相似文献
12.
In recent years, several research groups have studied a new generation of analysis methods for seismic response assessment of existing buildings. Nevertheless, many important developments are still needed in order to define more reliable and effective assessment procedures. Moreover, regarding existing buildings, it should be highlighted that due to the low knowledge level, the linear elastic analysis is the only analysis method allowed. The same codes (such as NTC2008, EC8) consider the linear dynamic analysis with behavior factor as the reference method for the evaluation of seismic demand. This type of analysis is based on a linear-elastic structural model subject to a design spectrum, obtained by reducing the elastic spectrum through a behavior factor. The behavior factor (reduction factor or q factor in some codes) is used to reduce the elastic spectrum ordinate or the forces obtained from a linear analysis in order to take into account the non-linear structural capacities. The behavior factors should be defined based on several parameters that influence the seismic nonlinear capacity, such as mechanical materials characteristics, structural system, irregularity and design procedures. In practical applications, there is still an evident lack of detailed rules and accurate behavior factor values adequate for existing buildings. In this work, some investigations of the seismic capacity of the main existing RC-MRF building types have been carried out. In order to make a correct evaluation of the seismic force demand, actual behavior factor values coherent with force based seismic safety assessment procedure have been proposed and compared with the values reported in the Italian seismic code, NTC08. 相似文献
13.
An energy-based methodology for the assessment of seismic demand 总被引：4，自引：0，他引：4
A methodology for the assessment of the seismic energy demands imposed on structures is proposed. The research was carried out through two consecutive phases. Inelastic design input energy spectra for systems with a prescribed displacement ductility ratio were first developed. The study of the inelastic behavior of energy factors and the evaluation of the response modification in comparison with the elastic case were performed by introducing two new parameters, namely: (1) the Response Modification Factor of the earthquake input energy (RE), representing the ratio of the elastic to inelastic input energy spectral values and (2) the ratio α of the area enclosed by the inelastic input energy spectrum in the range of periods between 0.05 and 4.0 s to the corresponding elastic value. The proposed design inelastic energy spectra, resulting from the study of a large set of strong motion records, were obtained as a function of ductility, soil type, source-to-site distance and magnitude.Subsequently, with reference to single degree of freedom systems, the spectra of the hysteretic to input energy ratio were evaluated, for different soil types and target ductility ratios. These spectra, defined to evaluate the hysteretic energy demand of structures, were described by a piecewise linear idealization that allows to distinguish three distinct regions as a function of the vibration period. In this manner, once the inelastic design input energy spectra were determined, the definition of the energy dissipated by means of inelastic deformations followed directly from the knowledge of hysteretic to input energy ratio.The design spectra of both input energy and hysteretic to input energy ratio were defined considering an elasto-plastic behavior. Nevertheless, other constitutive models were taken into account for comparison purposes. 相似文献
14.
地震反应分析中输入界面选取合理与否对设计地震动参数有重要影响。基于唐山地区钻孔剖面,分别选取剪切波速为500m/s的硬黏土和800m/s的岩石顶面作为基岩输入界面,采用一维等效线性化方法讨论中硬场地输入界面的选取对地表地震动参数的影响,结果表明:(1)地表峰值加速度放大倍数及地表加速度反应谱特征周期都随输入界面深度的增加而递增,且这种递增与输入地震动的强度及频谱特性都有密切联系;(2)随着输入界面深度的增加,地表加速度反应谱几乎全频段内增大,仅在短周期内出现减小的情况,但幅度十分有限;(3)中硬场地地震反应分析中基岩输入界面宜取剪切波速为800m/s的土层顶面。 相似文献
15.
Evaluating Earthquake-Triggered Landslide Hazard at the Basin Scale Through Gis in the Upper Sele River Valley 总被引：6，自引：0，他引：6
To evaluate techniques for assessing earthquake-triggeredlandslide hazard in the Southern Apennines (Italy), a GIS-based analysis was used to modelseismically induced slope deformations. Geological, geotechnical, geomorphological and seismologicaldata were integrated into a standard earthquake slope stability model. The model assessed thelandslide potential that existed during the 1980 Irpinian earthquake in the Upper Sele river Valley.The standard Newmark displacement analysis, widely used for predicting the location of shallowunstable slopes, does not take into account errors and/or uncertainties in the input parameters.Therefore, a probabilistic Newmark displacement analysis technique has been used. Probabilistictechniques allow, e.g., an estimation of the probability that a slope will exceed a certain criticalvalue of Newmark displacement. In our probabilistic method, a Monte-Carlo based simulation modelis used in conjunction with a GIS. The random variability of geotechnical data is modelled by probabilitydensity functions (pdfs), while for the seismic input three different regression laws wereconsidered. Input probability distributions are sampled and the resulting values input into empiricalrelations for estimating Newmark displacement. The outcome is a map in which to each siteis related a spatial probability distribution for the expected displacement in response to seismic loading.Results of the experiments show a high grade of uncertainty in the application of the Newmarkanalysis both for the deterministic and probabilistic approach in a complex geological setting suchas the high Sele valley, quite common in the Southern Apennines. They show a strong dependence onthe reliability of the spatial data used in input, so that, when the model is used at basin scale,results are strongly influenced by local environmental condition (e.g., topography, lithology, groundwatercondition) and decrease the model performance. 相似文献
16.
The first step in any seismic hazard study is the definition of seismogenic sources and the estimation of magnitude-frequency relationships for each source. There is as yet no standard methodology for source modeling and many researchers have worked on this topic. This study is an effort to define linear and area seismic sources for Northern Iran. The linear or fault sources are developed based on tectonic features and characteristic earthquakes while the area sources are developed based on spatial distribution of small to moderate earthquakes. Time-dependent recurrence relationships are developed for fault sources using renewal approach while time-independent frequency-magnitude relationships are proposed for area sources based on Poisson process. GIS functionalities are used in this study to introduce and incorporate spatial-temporal and geostatistical indices in delineating area seismic sources. The proposed methodology is used to model seismic sources for an area of about 500 by 400 square kilometers around Tehran. Previous researches and reports are studied to compile an earthquake/fault catalog that is as complete as possible. All events are transformed to uniform magnitude scale; duplicate events and dependent shocks are removed. Completeness and time distribution of the compiled catalog is taken into account. The proposed area and linear seismic sources in conjunction with defined recurrence relationships can be used to develop time-dependent probabilistic seismic hazard analysis of Northern Iran. 相似文献
17.
Response parameters used to estimate nonstructural damage differ depending on whether deformation‐sensitive or acceleration‐sensitive components are considered. In the latter case, seismic demand is usually represented through floor spectra, that is response spectra in terms of pseudo‐acceleration, which are calculated at the floor levels of the structure where the nonstructural components are attached to. Objective of this paper is to present a new spectrum‐to‐spectrum method for calculating floor acceleration spectra, which is able to explicitly account for epistemic uncertainties in the modal properties of the supporting structure. By using this method, effects on the spectra of possible variations from nominal values of the periods of vibration of the structure can be estimated. The method derives from the extension of closed‐form equations recently proposed by the authors to predict uniform hazard floor acceleration spectra. These equations are built to rigorously account for the input ground motion uncertainty, that is the record‐to‐record variability of the nonstructural response. In order to evaluate the proposed method, comparisons with exact spectra obtained from a standard probabilistic seismic demand analysis, as well as spectra calculated using the Eurocode 8 equation, are finally shown. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
18.
19.
DISCUSSION ON THE SPECTRA SHAPE OF SEISMIC MARGIN EARTHQUAKE OF NUCLEAR POWER PLANT IN CHINA 下载免费PDF全文
下载免费PDF全文 Fukushima nuclear accident caused widespread concern of earthquake initiated severe accident. Under this background, China nuclear utilities carried out research and application of seismic margin assessment(SMA)approach to evaluate the seismic margin of the existing nuclear power plants(NPP)by different spectra shape of seismic margin earthquake(SME). By reviewing the method used to determine SME of operational NPP in central and eastern United States(CEUS), this paper analyzed the seismic hazard characteristic of China NPP sites, contrasted the design basis ground motion between NPP in CEUS and China, and suggested giving priority to evaluating the seismic margin of operational NPP that adopted the improved second generation technology for the urgency and importance of assessment on the actual seismic capacity of NPP. Comparing RG1.60 spectrum to normalized site-specific SL-2 level acceleration spectra, we found that some normalized spectra overtook the RG1.60's in high frequency range, so it is not always adequate to scale RG1.60 spectrum to evaluate the seismic margin for sites of the improved second generation NPP. We selected a sample site whose site-specific SL-2 level ground motion is close to the standard design of improved second generation NPP(0.2g scaled RG1.60 spectrum)to determine the seismic margin earthquake by probabilistic seismic hazard analysis method of the sample site. Compared to the given PGA(0.3g)scaled scenario earthquake ground motions and the uniform hazard response spectrum(UHRS), whose PGA is 0.3g to PGA(0.3g)scaled standard spectra(median NUREG/CR0098 spectrum and RG1.60 spectrum), the results demonstrated that uniform hazard response spectrum and scaled scenario earthquake ground motions are both significantly higher than the PGA scaled median NUREG/CR0098 spectrum, and all the three spectra are enveloped by PGA scaled RG1.60 spectrum. Then, this paper suggests adopting the uniform hazard response spectrum or scenario earthquake ground motions to evaluate the seismic margin of improved second generation NPP beyond site SL-2 ground motion; and to evaluate the seismic margin of improved second generation NPP beyond standard design, we recommend to use PGA scaled RG1.60 spectrum. 相似文献
20.
A representative attenuation relationship is one of the key components required in seismic hazard assessment of a region of interest. Attenuation relationships for peak ground acceleration, peak ground velocity and response spectral accelerations for Sumatran megathrust earthquakes, covering Mw up to 9.0, are derived based on synthetic seismograms obtained from a finite‐fault kinematic model. The relationships derived are for very hard rock site condition and for a long‐distance range between 200 and 1500 km. They are then validated with recorded data from giant earthquakes on the Sumatran megathrust occurring since year 2000. A close examination of the recorded data also shows that spectral shapes predicted by most of the existing attenuation relationships and that specified in the IBC code are not particularly suitable for sites where potential seismic hazard is dominated by large‐magnitude, distant, earthquakes. Ground motions at a remote site are typically signified by the dominance of long‐period components with periods longer than 1 s, whereas the predominant periods from most of the existing attenuation relationships and the IBC code are shorter than 0.6 s. The shifting of response spectrum towards longer period range for distant earthquakes should be carefully taken into account in the formulation of future seismic codes for Southeast Asia, where many metropolises are located far from active seismic sources. The attenuation relationship derived in the present study can properly reproduce the spectral shape from distant subduction earthquakes, and could hopefully give insights into the formulation of future seismic codes. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献