共查询到20条相似文献，搜索用时 46 毫秒
1.
卫星重力测量技术的实现为测定地球动力学扁率提供了新的方式和途径,GRACE卫星是目前最新的重力测量卫星,据其恢复的低阶重力场较以往精度得到大大提高,然而其观测地球动力学扁率（二阶项）却与卫星激光测距（SLR）结果相差较大.本文采用最大熵谱和小波分析方法对GRACE和SLR观测的地球动力学扁率时间序列信号进行定量比较分析,结果表明：GRACE观测的地球动力学扁率年际周期变化振幅仅为SLR观测结果的25%,并且目前GRACE观测的地球动力学扁率数据中含有系统输入信息和相位差,但前者较后者包含有较强的短周期（2～6月）信息.造成这种差异的主要原因可能来自于GRACE与SLR全球观测数据时空分布不同. 相似文献
2.
Michael Pearlman Carey Noll Peter Dunn Julie Horvath Van Husson Paul Stevens Mark Torrence Hoai Vo Scott Wetzel 《Journal of Geodynamics》2005,40(4-5):470
The International Laser Ranging Service (ILRS) was established in September 1998 as a service within the IAG to support programs in geodetic, geophysical, and lunar research activities and to provide data products to the International Earth Rotation Service (IERS) in support of its prime objectives. Now in operation for 5 years, the ILRS develops: (1) the standards and specifications necessary for product consistency and (2) the priorities and tracking strategies required to maximize network efficiency. The service collects, merges, analyzes, archives and distributes satellite and lunar laser ranging data to satisfy a variety of scientific, engineering, and operational needs and encourages the application of new technologies to enhance the quality, quantity, and cost effectiveness of its data products. The ILRS works with: (1) the global network to improve station performance; (2) new satellite missions in the design and building of retroreflector targets to maximize data quality and quantity and (3) science programs to optimize scientific data yield. The ILRS Central Bureau maintains a comprehensive web site as the primary vehicle for the distribution of information within the ILRS community. The site, which can be accessed at: http://ilrs.gsfc.nasa.gov is also available at mirrored sites at the Communications Research Laboratory (CRL) in Tokyo and the European Data Center (EDC) in Munich.During the last 2 years, the ILRS has addressed very important challenges: (1) data from the field stations are now submitted hourly and made available immediately through the data centers for access by the user community; (2) tracking on low satellites has been significantly improved through the sub-daily issue of predictions, drag functions, and the real-time exchange of time biases; (3) analysis products are now submitted in SINEX format for compatibility with the other space geodesy techniques; (4) the Analysis Working Group is heavily engaged in Pilot Projects as it works toward an ILRS “standard” global solution and (5) SLR has significantly increased its participation in the International Terrestrial Reference Frame (ITRF) activity, which is important to the success of IGGOS. 相似文献
3.
4.
The technique of linear digital filtering developed for the computation of standard curves for conventional resistivity and electromagnetic depth soundings is applied to the determination of filter coefficients for the computation of dipole curves from the resistivity transform function by convolution. In designing the filter function from which the coefficients are derived, a sampling interval shorter than the one used in the earlier work on resistivity sounding is found to be necessary. The performance of the filter sets is tested and found to be highly accurate. The method is also simple and very fast in application. 相似文献
5.
针对井间地震数据成像技术的一些缺陷并根据井间地震数据的特点,利用井间上、下行反射波信息,提出了一种基于波动方程的井间地震反射波偏移成像技术,该技术既考虑了井间地震数据的运动学特征(时间信息),又考虑了动力学特征(振幅信息).以PC机集群为计算平台,Linux为操作系统,设计了井间地震炮域波动方程偏移成像并行计算流程,并且在64位联想机群上用井间模型数据和某油田的实际数据对该技术和计算流程进行了测试和试处理,试验结果表明成像方法和并行算法正确、实用且计算效率高. 相似文献
6.
为了在复杂地表条件下实现地震波走时计算,提出了一种基于线性插值和窄带技术的走时计算新方法.其中,线性插值用于局部走时计算,窄带技术用于局部波前捕获和追踪.为了逼近起伏地表,采用三角网和矩形网相结合的方法对速度模型进行剖分.为了得到局部走时计算公式,利用费马（Fermat）原理和关于入射点位置的限定条件.有关编程实践和数值试验表明：新方法不仅可以有效、灵活地处理地表高程的剧烈变化,而且还具有很好的适应性和稳定性,得到的计算结果满足波前传播规律. 相似文献
7.
Summary The concept of diffracted rays introduced by Keller (1962) opened the way for a ray approach in the numerical modeling of
the diffraction phenomena frequently seen in the seismic field records. Unlike the computation of travel times, which has
never caused any difficulties being governed by the same eikonal equation as are the rays of ordinary seismic body waves,
the evaluation of the diffracted ray amplitude has been another story. In this paper we give a tutorial account of a highly
promising technique for the computation of the ray amplitude of seismic waves diffracted by linear edges on seismic interfaces
originally presented by Klem-Musatov (1980, 1995). We demonstrate the adequacy of this technique on a series of SH synthetic
traces containing diffracted arrivals, some of them diffracted more than once. Our computer program is based on a successful
combination of Klem-Musatov's approach with the zero order approximation of the Asymptotic Ray Theory (Červeny and Hron, 1980).
We showed in the paper that both techniqúes are ideally suited for such a combination, since the ray amplitude evaluation
in each of them is based on the same transport equation. In our tutorial review we present all formulae which are needed for
a practical implementation of the method and provide their physical interpretation, wherver possible, by using the numerical
examples presented in the paper. 相似文献
8.
三维起伏地表条件下的地震波走时计算技术是研究三维起伏地表地区很多地震数据处理技术的基础性工具.为了获得适应于任意三维起伏地表且计算精度高的走时算法,提出三维不等距迎风差分法.该方法采用不等距网格剖分三维起伏地表模型,通过在迎风差分格式中引入不等距差分格式、Huygens原理及Fermat原理来建立地表附近的局部走时计算公式,并通过在窄带技术中设定新的网格节点类型来获得三维起伏地表条件下算法的整体实现步骤.精度及算例分析表明:三维不等距迎风差分法具有很高的计算精度且能够适应于任意三维起伏地表模型. 相似文献
9.
10.
地震层析技术(Seismic Tomography)正在作为一种新技术引入到地震学的研究中,但由于地学中存在着非完全投影和模型参数间的耦合,使得该技术的应用受到了限制。本文讨论了用首波走时资料作为投影数据,重建基底或莫霍界面的速度图象的方法,同时亦可利用该方法对震源深度做进一步的修正。计算中采用了代数重建法,并就改善ART和SIRT这两种算法的稳定性及收敛速度,提出了较合理的权因子。通过数值模拟还对分辨和方差的影响进行了分析。 利用海南岛人工爆破地震Ⅰ、Ⅱ测线非纵剖面的P_8波走时资料,初步得到了该区基底面的速度图象。结果表明,基底的低速区分布与地表的两条断裂带吻合得较好,说明北东向的春江-中和断裂与干冲-木裳断裂穿过了基底。断裂带内的分段特征也在图象中有所表现 相似文献
11.
基于云计算的九分量噪声互相关函数计算及其在China Array密集台阵数据的应用 总被引：1，自引：0，他引：1
提出一种基于云计算的九分量噪声互相关函数的计算方法,可以利用弹性的云计算服务,实现海量噪声互相关函数计算的分解和加速。本文将此技术应用于"中国地震科学台阵探测——南北地震带北段"674个宽频带台站2014~2015年的三分量连续记录,获取了所有台站间的九分量噪声互相关函数。总体计算共完成了约22万条台站对路径上近14.9亿条单天互相关函数的计算,整体平均耗时约为10.2h,完成等量计算,传统计算模式需要耗时近6个月,基于云计算的NCF计算技术实现了近400倍的加速,并可以弹性地扩充。分析了所得九分量噪声互相关函数中瑞利面波的ZH振幅比,并与天然地震中瑞利面波的振幅比进行了比较,验证了计算结果的可靠性。基于云计算的噪声互相关函数计算方法,为利用现代计算技术处理海量数据提供了重要参考。 相似文献
12.
《Advances in water resources》2007,30(3):576-588
Multiscale solution methods are currently under active investigation for the simulation of subsurface flow in heterogeneous formations. These procedures capture the effects of fine scale permeability variations through the calculation of specialized coarse scale basis functions. Most of the multiscale techniques presented to date employ localization approximations in the calculation of these basis functions. For some highly correlated (e.g., channelized) formations, however, global effects are important and these may need to be incorporated into the multiscale basis functions. This can be accomplished using global fine scale simulations, but this may be computationally expensive. In this paper an adaptive local–global technique, originally developed within the context of upscaling, is applied for the computation of multiscale basis functions. The procedure enables the efficient incorporation of approximate global information, determined via coarse scale simulations, into the multiscale basis functions. The resulting procedure is formulated as a finite volume element method and is applied for a number of single- and two-phase flow simulations of channelized two-dimensional systems. Both conforming and nonconforming procedures are considered. The level of accuracy of the resulting method is shown to be consistently higher than that of the standard finite volume element multiscale technique based on localized basis functions determined using linear pressure boundary conditions. 相似文献
13.
根据德国卫星激光测距（ＳＬＲ）数据分析中心ＧＦＺ对１９８０年１月－１９９１年７月获取的ＳＬＲ观测数据处理后得到的４１个ＳＬＲ站的站速度，解算了北美、欧亚、太平洋、南美和澳大利亚板块之间的相对运动欧拉矢量，得到了第１个ＳＬＲ实测的板块运动模型ＳＰＭＭ１．与地学板块模型ＲＭ２和ＮＵＶＥＬ－１的比较指出，ＳＰＭＭ１大体上与地学模型一致，与ＮＵＶＥＬ－１更为接近；ＳＰＭＭ１的欧亚与北美板块相对运动欧拉极与ＮＵＶＥＬ－１的相应极很接近，但旋转速率明显偏小．还分析了各板块上ＳＬＲ站的局部形变特征．欧亚板块东部和西部存在１０－２０ｍｍ／ａ的相对运动；板块边界附近ＳＬＲ站的残差站速度基本上反映了该边界的构造形变特征． 相似文献
14.
地震波场数值模拟是理解地震波在地下介质中的传播特点,帮助解释观测数据的有效手段,而提高计算精度和运算效率是所有波场数值模拟方法研究所追求的目标.有限差分技术是求解波动方程计算效率最高、应用最为广泛的方法之一.但传统的有限差分技术计算过程中的数值频散问题影响了该技术的计算精度与计算效率.本文通过交错网格高阶有限差分技术与通量校正传输方法（Flux|corrected transport method,FCT）相结合, 对横向各向同性介质（Transverse isotropic medium,TI）一阶速度|应力弹性波动方程组进行了数值求解研究.波场快照数值模拟结果表明,本文研究的数值模拟方法与波动方程二阶有限差分方法、交错网格四阶有限差分方法相比,在压制网格数值频散方面有明显的优势,计算精度提高,而且可以利用较大的空间步长,提高计算效率. 相似文献
15.
地震叠前逆时偏移是当前公认的地震成像的有效途径,然而它面临着计算量甚巨,低频成像噪音以及存储量大等问题,因此,业内科研工作者对其研究乐此不疲.借助GPU/CPU协同计算可以有效解决计算量的难点,笔者已在另文中阐述,本文着重探讨成像噪音抑制以及存储问题.文中分析了叠前逆时偏移产生成像噪音的机制,据此提出在叠前地震资料中先对数据进行相位与振幅校正,进而在成像后运用拉普拉斯算子滤波法消除成像噪音,从而有效去除成像所产生的低频噪音;针对存储量,采用随机边界,用计算换存储,并借助GPU实现,节省了GPU与CPU之间的数据通讯,数值实验结果表明,采用随机边界方法的逆时偏移结果与直接存储波场的方法得到的结果差别甚小. 相似文献
16.
17.
The basic idea of subgrid models is the use of available high-resolution bathymetric data at subgrid level in computations that are performed on relatively coarse grids allowing large time steps. For that purpose, an algorithm that correctly represents the precise mass balance in regions where wetting and drying occur was derived by Casulli (Int J Numer Method Fluids 60:391–408, 2009) and Casulli and Stelling (Int J Numer Method Fluids 67:441–449, 2010). Computational grid cells are permitted to be wet, partially wet, or dry, and no drying threshold is needed. Based on the subgrid technique, practical applications involving various scenarios were implemented including an operational forecast model for water level, salinity, and temperature of the Elbe Estuary in Germany. The grid generation procedure allows a detailed boundary fitting at subgrid level. The computational grid is made of flow-aligned quadrilaterals including few triangles where necessary. User-defined grid subdivision at subgrid level allows a correct representation of the volume up to measurement accuracy. Bottom friction requires a particular treatment. Based on the conveyance approach, an appropriate empirical correction was worked out. The aforementioned features make the subgrid technique very efficient, robust, and accurate. Comparison of predicted water levels with the comparatively highly resolved classical unstructured grid model shows very good agreement. The speedup in computational performance due to the use of the subgrid technique is about a factor of 20. A typical daily forecast can be carried out in less than 10 min on a standard PC-like hardware. The subgrid technique is therefore a promising framework to perform accurate temporal and spatial large-scale simulations of coastal and estuarine flow and transport processes at low computational cost. 相似文献
18.
The issues of prestack reverse time migration and solutions with Graphic Processing Unit implementation 总被引：2，自引：0，他引：2
Hongwei Liu Bo Li Hong Liu Xiaolong Tong Qin Liu Xiwen Wang Wenqing Liu 《Geophysical Prospecting》2012,60(5):906-918
Prestack reverse time migration (RTM) is a very useful tool for seismic imaging but has mainly three bottlenecks: highly intensive computation cost, low‐frequency band imaging noise and massive memory demand. Traditionally, PC‐clusters with thousands of computation nodes are used to perform RTM but it is too expensive for small companies and oilfields. In this article, we use Graphic Processing Unit (GPU) architecture, which is cheaper and faster to implement RTM and we obtain an order of magnitude higher speedup ratio to solve the problem of intensive computation cost. Aiming at the massive memory demand, we adopt the pseudo random boundary condition that sacrifices the computation cost but reduces the memory demand. For rugged topography RTM, it is difficult to deal with the rugged free boundary condition with the finite difference method. We employ a simplified boundary condition that avoids the abundant logical judgment to make the GPU implementation possible and does not induce any sacrifice on efficiency. Besides, we have also done some tests on multi‐GPU implementation for wide azimuth geometries using the latest GPU cards and drivers. Finally, we discuss the challenges of anisotropy RTM and GPU solutions. All the jobs stated above are based on GPU and the synthetic data examples will show the efficiency of the algorithm and solutions. 相似文献
19.
K. DUCKWORTH 《Geophysical Prospecting》1972,20(3):514-528
The interpretation of Turam data is treated by means of a development of the conventional approach to this type of data. The development consists of a curve matching technique based upon a line current approximation to the true induced current pattern. The technique requires computation facilities which are readily available in modern programmable calculators. Practical examples of the use of the method illustrate that it can reveal information concerning the geometry of a conducting body which would not be gained by the conventional approach. 相似文献