共查询到20条相似文献，搜索用时 31 毫秒
1.
Seismic reflection data imaging conjugate crustal sections at the South China Sea margins result in a conceptual model for rift-evolution at conjugate magma-poor margins in time and space.The wide Early Cenozoic South China Sea rift preserves the initial rift architecture at the distal margins. Most distinct are regular undulations in the crust–mantle boundary. Individual rift basins are bounded to crustal blocks by listric normal faults on either side. Moho uplifts are distinct beneath major rift basins, while the Moho is downbended beneath crustal blocks, with a wavelength of undulations in the crust–mantle boundary that approximately equals the thickness of the continental crust. Most of the basin-bounding faults sole out within the middle crust. At the distal margins, detachment faults are located at a mid-crustal level where a weak zone decouples crust and mantle lithosphere during rifting. The lower crust in contrast is interpreted as being strong. Only in the region within about 50 km from the Continent–Ocean Transition (COT) we suggest that normal faults reach the mantle, enabling potentially a coupling between the crust and the mantle. Here, at the proximal margins detachment fault dip either seaward or landward. This may indicate the presence of exhumed mantle bordering the continental margins.Post-rift shallow-water platform carbonates indicate a delay in subsidence during rifting in the South China Sea. We propose that this is an inherent process in highly extended continental margins and a common origin may be the influx of warm asthenospheric material into initially cool sub-lithospheric mantle.On a crustal-scale largely symmetric process predominate in the initial rifting stage. At the future COT either of the rift basin-bounding faults subsequently penetrates the entire crust, resulting in asymmetry at this location. However, asymmetric deformation which is controlled by large scale detachment faulting is confined to narrow areas and does not result in a margin-wide simple-shear model. Rather considerable along-margin variations are suggested resulting in alternating “upper and lower plate” margins. 相似文献
2.
《Marine and Petroleum Geology》2003,20(2):177-206
The Late Cretaceous–Paleocene rifting in the NW Vøring Basin is characterized by four main fault complexes and pronounced upper-crustal structural segmentation. The fault complexes are linked by accommodation zones, which separate fault systems of different polarities and thick from thinner coeval sedimentary successions. Structural and stratigraphic analyses suggest that the early rift phase (∼81 to 65 Ma) was characterized by large-scale normal faulting, along-margin segmentation and varying structural styles; whereas the late rift phase (∼65 to 55 Ma) was associated with continued extension, regional uplift, intrusive igneous activity and subsequent erosion. The rifting ended with breakup at ∼55 Ma accompanied by massive, but gradually waning extrusive igneous activity over the next 3 Myr. The mode of rifting appears to have changed from brittle to more ductile extensional deformation from the early to late rift phase. The changing rift rheology is probably related to the arrival of the Iceland mantle plume and initiation of associated igneous activity. Hence, the NW Vøring Basin provides an example of complex interaction of structural and magmatic relationships during rifting and breakup. 相似文献
3.
大陆岩石圈在张裂和分离时的变形模式 总被引：4，自引：0，他引：4
姚伯初 《海洋地质与第四纪地质》2002,22(3):59-67
通过对南海南北共轭边缘地壳剖面的对比研究,发现大陆岩石圈的物理性质是分层的：上、中地壳呈脆性,下地壳表现出塑性,而岩石圈上地幔则仍呈脆性。因此,在它受张性应力场作用时,其变形和破裂分离方式也是分层进行的：上、中地壳能发生犁式断裂,产生的断块沿断面转动在地表产生一系列半地堑,并使地壳厚度减薄;如拉张应力继续作用时,上、中地壳将沿犁式断裂被拉开,从而形成上、下板块边缘,并彼此分开。下地壳则发生塑性变形,使地壳厚度减薄,并最终将其拉断。岩石圈上地幔亦可产生陡倾断裂,形成的断块沿断面转动亦使其厚度减薄,并最终沿陡倾断裂被拉断。这就是我们称之为岩石圈变形和破裂分 离时的分层变形及分层破裂分离模式。 相似文献
4.
TAIGER project deep-penetration seismic reflection profiles acquired in the northeastern South China Sea (SCS) provide a detailed view of the crustal structure of a very wide rifted continental margin. These profiles document a failed rift zone proximal to the shelf, a zone of thicker crust 150 km from the shelf, and gradually thinning crust toward the COB, spanning a total distance of 250–300 km. Such an expanse of extended continental crust is not unique but it is uncommon for continental margins. We use the high-quality images from this data set to identify the styles of upper and lower crustal structure and how they have thinned in response to extension and, in turn, what rheological variations are predicted that allow for protracted crustal extension. Upper crustal thinning is greatest at the failed rift (βuc ≈ 7.5) but is limited farther seaward (βuc ≈ 1–2). We interpret that the lower crust has discordantly thinned from an original 15–17 km to possibly less than 2–3 km thick beneath the central thick crust zone and more distal areas. This extreme lower crustal thinning indicates that it acted as a weak layer allowing decoupling between the upper crust and the mantle lithosphere. The observed upper crustal thickness variations and implied rheology (lower crustal flow) are consistent with large-scale boudinage of continental crust during protracted extension. 相似文献
5.
The Pearl River Mouth Basin is one of the most favorable areas for gas exploration on the northern slope of the South China Sea. Differences of fault patterns between shelf and slope are obvious. In order to investigate the tectonic evolution, five series of analogue modeling experiments were compared. The aim of this study is to investigate how crustal thickness influences fault structures, and compare this to the observed present-day fault structures in the Pearl River Mouth Basin. The initial lithospheric rheological structure can be derived from the best fit between the modeled and observed faults. The results indicate. (1) Different initial crustal rheological structures can produce different rift structures in the Pearl River Mouth Basin. (2) We also model that the Baiyun Sag in the southern Pearl River Mouth Basin may have had a thinned crust before rifting compared to the rest of the basin. (3) The thickness ratio of brittle to ductile crust in southern Pearl River Mouth Basin is less than normal crust, suggesting an initially hot and weak lithosphere. (4) Slightly south of the divergent boundary magma may have taken part in the rifting process during the active rift stage. 相似文献
6.
The continental margins of the southwest subbasin in the South China Sea mark a unique transition from multi-stages magma-poor continental rifting to seafloor spreading. We used reflection and refraction profiles across the margins to investigate the rifting process of the crust. Combining with the other seismic profiles acquired earlier, we focused on the comparative geological interpretation from the result of multichannel seismic analysis and wide-angle seismic tomography. Our result provides the evidence of upper crustal layer with abundant fractures below the acoustic basement with a P-wave velocity from 4.0 to 5.5 km s?1. It indicates extensive deformation of the brittle crust during the continental rifting and can make a good explanation for the observed extension discrepancy in the rift margins of the South China Sea. The seismic chronostratigraphic result shows the possibility of the intra-continental extension center stayed focused for quite a long time in Eocene. Additionally, our evidence suggested that continental margin of the southwest subbasin had experienced at least three rifting stages and the existence of the rigid blocks is an appropriate explanation to the asymmetric rifting of the South China Sea. 相似文献
7.
A key consideration in tectonic models for SE Asia and opening of the South China Sea is the role that the West Baram and Tinjar Lines of NW Borneo may have played in accommodating the motion of crustal blocks displaced from Asia following India's collision. There are few studies that focus on these “lines”. Using onshore geological studies and offshore seismic data to address the origin and tectonic significance of these, this paper concludes that rather than a major transform boundary between Luconia and the Dangerous Grounds, the West Baram Line marks the boundary between domains of continental crust that underwent differential extension in the Eocene. The Baram Basin is underlain by hyperextended continental crust on the NE side of the Baram Line. The strong contrast in the geological features across the Tinjar and West Baram Lines likely reflects ancient differences in crustal rheology with Luconia being the more rigid block. Although lack of significant strike slip faulting along the West Baram Line poses problems for tectonic models in which a wide proto-South China Sea is subducted beneath NW Borneo, intra-plate deformation, such as partial inversion of the Dangerous Grounds rift, offers a potential mechanism to mass balance blocks displaced from Asia with the reduced strike slip motion along the West Baram Line. 相似文献
8.
南海东北部陆缘构造演化信息丰富,对于理解南海的演化过程至关重要。本文收集了南海东北部的深反射地震和海底广角地震成果剖面,提取地壳和下地壳高速层的厚度结果,并结合水深、重磁异常和岩石圈的流变学等地质地球物理资料,对南海东北部的地壳减薄特征、吕宋-琉球转换板块边界的性质和下地壳高速层的分布及成因进行了分析和讨论。南海东北部的地壳减薄在横向和垂向上都存在不均匀性,以下地壳减薄为主,在台西南盆地存在极端减薄地壳;南海北缘的白云凹陷、西沙海槽和西缘的中建南盆地也存在类似的极端减薄地壳,且都与刚性地块共轭或邻近,推测刚性地块的存在导致地壳初始破裂时下地壳流动和地幔上隆是局部出现地壳极端减薄的主要原因。吕宋-琉球转换板块边界两侧在海底地形、新生代反射和重磁异常等方面均存在差异,与中生代岛弧引起的高磁异常大角度相交,其可能是中生代古特提斯构造域向太平洋构造域转换的边界断裂。下地壳高速层在南海东北部广泛发育,结合其分布特征和波速比Vp/Vs的分布区间,认为其是多期次岩浆底侵形成的铁镁质基性岩。 相似文献
9.
A key consideration in tectonic models for SE Asia and opening of the South China Sea is the role that the West Baram and Tinjar Lines of NW Borneo may have played in accommodating the motion of crustal blocks displaced from Asia following India's collision. There are few studies that focus on these “lines”. Using onshore geological studies and offshore seismic data to address the origin and tectonic significance of these, this paper concludes that rather than a major transform boundary between Luconia and the Dangerous Grounds, the West Baram Line marks the boundary between domains of continental crust that underwent differential extension in the Eocene. The Baram Basin is underlain by hyperextended continental crust on the NE side of the Baram Line. The strong contrast in the geological features across the Tinjar and West Baram Lines likely reflects ancient differences in crustal rheology with Luconia being the more rigid block. Although lack of significant strike slip faulting along the West Baram Line poses problems for tectonic models in which a wide proto-South China Sea is subducted beneath NW Borneo, intra-plate deformation, such as partial inversion of the Dangerous Grounds rift, offers a potential mechanism to mass balance blocks displaced from Asia with the reduced strike slip motion along the West Baram Line. 相似文献
10.
Rifting of continental margins is generally diachronous along the zones where continents break due to various factors including the boundary conditions which trigger the extensional forces, but also the internal physical boundaries which are inherent to the composition and thus the geological history of the continental margin. Being opened quite recently in the Tertiary in a scissor-shape manner, the South China Sea (SCS) offers an image of the rifting structures which varies along strike the basin margins. The SCS has a long history of extension, which dates back from the Late Cretaceous, and allows us to observe an early stretching on the northern margin onshore and offshore South China, with large low angle faults which detach the Mesozoic sediments either over Triassic to Early Cretaceous granites, or along the short limbs of broad folds affecting Palaeozoic to Early Cretaceous series. These early faults create narrow troughs filled with coarse polygenic conglomerate grading upward to coarse sandstone. Because these low-angle faults reactivate older trends, they vary in geometry according to the direction of the folds or the granite boundaries. A later set of faults, characterized by generally E–W low and high angle normal faults was dominant during the Eocene. Associated half-graben basement deepened as the basins were filling with continental or very shallow marine sediments. This subsequent direction is well expressed both in the north and the SW of the South China Sea and often reactivated earlier detachments. At places, the intersection of these two fault sets resulting in extreme stretching with crustal boudinage and mantle exhumation such as in the Phu Khanh Basin East of the Vietnam fault. A third direction of faults, which rarely reactivates the detachments is NE–SW and well developed near the oceanic crust in the southern and southwestern part of the basin. This direction which intersects the previous ones was active although sea floor spreading was largely developed in the northern part, and ended by the Late Miocene after the onset of the regional Mid Miocene unconformity known as MMU and dated around 15.5 Ma. Latest Miocene is marked by a regional basement drop and localized normal faults on the shelf closer to the coast. The SE margin of the South China Sea does not show the extensional features as well as the Northern margin. Detachments are common in the Dangerous Grounds and Reed Bank area and may occasionally lead to mantle exhumation. The sedimentary environment on the extended crust remained shallow all along the rifting and a large part of the spreading until the Late Miocene, when it suddenly deepened. This period also corresponds to the cessation of the shortening of the NW Borneo wedge in Palawan, Sabah, and Sarawak. We correlate the variation of margin structure and composition of the margin; mainly the occurrence of granitic batholiths and Mesozoic broad folds, with the location of the detachments and major normal faults which condition the style of rifting, the crustal boudinage and therefore the crustal thickness. 相似文献
11.
The development of an anomalously deep rift appears to be a common characteristic of the evolution of microplates along the East Pacific Rise, including the Galapagos, Easter, and Juan Fernandez microplates. We investigate crustal rifting at Endeavor Deep on the Juan Fernandez microplate using bathymetry, gravity and side scan sonar data. An initial phase of lithospheric extension accompanied by extensive subsidence results in the formation of a very deep rift valley (up to 4 km of relief, 70 km long and 20 km wide). Morphological observations and gravity data derived from GEOSAT satellite altimetry show the subsequent initiation of crustal accretion and development of a mature spreading center. Recent models of the kinematics of microplate rotation allow the amount of opening across Endeavor Deep over the past 1 m.y. to be quantified. We develop a simple mechanical model of rifting involving block faulting and flexural response to explain the gravity signature over the rift valley. The Bouguer gravity anomaly is asymmetric with respect to the surface topography and requires that a shallow-dipping fault on the western wall of the valley dominate the extension at Endeavor Deep. Consideration of three similar microplate rift valleys leads us to suggest that asymmetric rifting is the characteristic process forming microplate deeps. 相似文献
12.
The Pelotas Basin is the classical example of a volcanic passive margin displaying large wedges of seaward-dipping reflectors (SDR). The SDR fill entirely its rifts throughout the basin, characterizing the abundant syn-rift magmatism (133–113 Ma). The Paraná–Etendeka Large Igneous Province (LIP), adjacent to west, constituted the pre-rift magmatism (134–132 Ma). The interpretation of ultra-deep seismic lines showed a very different geology from the adjacent Santos, Campos and Espírito Santo Basins, which constitute examples of magma-poor passive margins. Besides displaying rifts totally filled by volcanic rocks, diverse continental crustal domains were defined in the Pelotas Basin, such as an outer domain, probably constituted by highly stretched and permeated continental igneous crust, and a highly reflective lower crust probably reflecting underplating.The analysis of rifting in this portion of the South Atlantic is based on seismic interpretation and on the distribution of regional linear magnetic anomalies. The lateral accretion of SDR to the east towards the future site of the breakup and the temporal relationship between their rift and sag geometries allows the reconstitution of the evolution of rifting in the basin. Breakup propagated from south to north in three stages (130–127.5; 127.5–125; 125–113 Ma) physically separated by oceanic fracture zones (FZ). The width of the stretched, thinned and heavily intruded continental crust also showed a three-stage increase in the same direction and at the same FZ. Consequently, the Continental-Oceanic Boundary (COB) shows three marked shifts, from west to east, from south to north, resulting into rift to margin segmentation. Rifting also propagated from west to east, in the direction of the final breakup, in each of the three segments defined. The importance of the Paraná–Etendeka LIP upon the overall history of rupturing and breakup of Western Gondwanaland seems to have been restricted in time and in space only to the Pelotas Basin. 相似文献
13.
The South China Sea is the largest marginal basin of SE Asia, yet its mechanism of formation is still debated. A 1000-km long wide-angle refraction seismic profile was recently acquired along the conjugate margins of the SW sub-basin of the South China Sea, over the longest extended continental crust. A joint reflection and refraction seismic travel time inversion is performed to derive a 2-D velocity model of the crustal structure and upper mantle. Based on this new tomographic model, northern and southern margins are genetically linked since they share common structural characteristics. Most of the continental crust deforms in a brittle manner. Two scales of deformation are imaged and correlate well with seismic reflection observations. Small-scale normal faults (grabens, horsts and rotated faults blocks) are often associated with a tilt of the velocity isocontours affecting the upper crust. The mid-crust shows high lateral velocity variation defining low velocity bodies bounded by large-scale normal faults recognized in seismic reflection profiles. Major sedimentary basins are located above low velocity bodies interpreted as hanging-wall blocks. Along the northern margin, spacing between these velocity bodies decreases from 90 to 45 km as the total crust thins toward the Continent–Ocean Transition. The Continent–Ocean Transitions are narrow and slightly asymmetric – 60 km on the northern side and no more than 30 km on the southern side – indicating little space for significant hyper-stretched crust. Although we have no direct indication for mantle exhumation, shallow high velocities are observed at the Continent–Ocean Transition. The Moho interface remains rather flat over the extended domain, and remains undisturbed by the large-scale normal faults. The main décollement is thus within the ductile lower crust. 相似文献
14.
南海北部深水区东西构造差异性及其动力学机制 总被引：1，自引：0，他引：1
南海北部深水区位于南海洋陆转换带,构造运动活跃,构造特征复杂。同时,南海北部深水区石油、天然气、天然气水合物等矿产资源丰富。因此,加强南海北部深水盆地构造特征分析,揭示南海北部陆缘构造属性与南海形成演化机制,对于南海深部过程演变研究、油气资源评价与地质灾害防治等具有重要的意义。本论文通过对南海北部深水区陆架-陆坡结构、盆地构造特征与演化规律的分析,指出研究区东西存在明显的构造差异性,并分析了其动力学机制。南海北部深水区东部陆架-陆坡结构为宽洼窄隆型,而西部为窄洼宽隆型。东部珠江口盆地深水凹陷均为半地堑结构,剖面上呈不对称的箕状;西部琼东南盆地除北礁凹陷为南段北超的小型半地堑外,其它凹陷均为地堑结构,为南北双断式沉积体系。在构造演化方面,东部中中新世末结束裂后期进入新构造活动期,白云凹陷构造活动性增强,表现为快速的沉降和显著的晚期断裂作用;而西部晚中新世末才进入新构造活动期,深水区表现为快速沉积作用,断裂活动较弱。 相似文献
15.
Crustal features of the northeastern South China Sea: insights from seismic and magnetic interpretations 总被引：1，自引：0，他引：1
Yi-Ching Yeh Shu-Kun Hsu Wen-Bin Doo Jean-Claude Sibuet Char-Shine Liu Chao-Shing Lee 《Marine Geophysical Researches》2012,33(4):307-326
We interpret seven two-dimensional deep-penetration and long-offset multi-channel seismic profiles in the northernmost South China Sea area, which were collected by R/V Marcus G. Langseth during the TAIwan GEodynamics Research (TAIGER) project in 2009. To constrain the crustal characteristics, magnetic inversion and forward magnetic modeling were also performed. The seismic results clearly show tilted faulting blocks in the upper crust and most of the fault plane connects downward to a quasi-horizontal detachment as its bottom in the south of the Luzon-Ryukyu transform plate boundary. North of the plate boundary, a small-scale failed rifted basin (minimum 5 km in crustal thickness) with negative magnetization probably indicates an extended continental origin. Significant lower crustal material (LCM) was imaged under a crustal fracture area which indicated a continent and ocean transition origin. The thickest LCM (up to 6.5 km) is located at magnetic isochron C15 that is probably caused by the magma supply composite of a Miocene syn-rift volcanic event and Pliocene Dongsha volcanic activity for submarine volcanoes and sills in the surrounding area. The LCM also caused Miocene crustal blocks to be uplifted reversely as 17 km crustal thickness especially in the area of magnetic isochron C15 and C16. In addition, the wide fault blocks and LCM co-existed on the magnetic striped area (i.e. C15–C17) in the south of the Luzon-Ryukyu transform plate boundary. Magnetic forward modeling suggests that the whole thick crustal thickness (>12 km thick) needs to be magnetized in striped way as oceanic crust. However, the result also shows that the misfit between observed and synthetic magnetic anomaly is about 40 nT, north of isochron C16. The interval velocity derived from pre-stack time migration suggests that the crust is composed of basaltic intrusive upper crust and lower crustal material. The crustal nature should refer to a transition between continent and ocean. Thus, the magnetic reversals may be produced in two possible ways: basaltic magma injected along the crustal weak zone across magnetic reversal epoch and because some undiscovered ancient piece of oceanic crust existed. The crustal structure discrimination still needs to be confirmed by future studies. 相似文献
16.
The identification of the structures and deformation patterns in magma-poor continental rifted margins is essential to characterize the processes of continental lithosphere necking. Brittle faults, often termed mantle detachments, are believed to play an essential role in the rifting processes that lead to mantle exhumation. However, ductile shear zones in the deep crust and mantle are rarely identified and their mechanical role remains to be established. The western Betics (Southern Spain) provide an exceptional exposure of a strongly thinned continental lithosphere, formed in a supra-subduction setting during Oligocene-Lower Miocene. A full section of the entire crust and the upper part of the mantle is investigated. Variations in crustal thickness are used to quantify crustal stretching that may reach values larger than 2000% where the ductile crust almost disappears, defining a stage of hyper-stretching. Opposite senses of shear top-to-W and top-to-E are observed in two extensional shear zones located close to the crust-mantle boundary and along the brittle-ductile transition in the crust, respectively. Where the ductile crust almost disappears, concordant top-to-E-NE senses of shear are observed in both upper crust and serpentinized mantle. Late high-angle normal faults with ages of ca. 21 Ma or older (40Ar/39Ar on white mica) crosscut the previously hyper-stretched domain, involving both crust and mantle in tilted blocks. The western Betics exemplify, probably better than any previous field example, the changes in deformation processes that accommodate the progressive necking of a continental lithosphere. Three successive steps can be identified: i/a mid-crustal shear zone and a crust-mantle shear zone, acting synchronously but with opposite senses of shear, accommodate ductile crust thinning and ascent of subcontinental mantle; ii/hyper-stretching localizes in the neck, leading to an almost disappearance of the ductile crust and bringing the upper crust in contact with the subcontinental mantle, each of them with their already acquired opposite senses of shear; and iii/high-angle normal faulting, cutting through the Moho, with related block tilting, ends the full exhumation of the mantle in the zone of localized stretching. The presence of a high strength sub-Moho mantle is responsible for the change in sense of shear with depth. Whereas mantle exhumation in the western Betics occurred in a backarc setting, this deformation pattern controlled by a high-strength layer at the top of the lithosphere mantle makes it directly comparable to most passive margins whose formation lead to mantle exhumation. This unique field analogue has therefore a strong potential for the seismic interpretation of the so-called “hyper-extended margins”. 相似文献
17.
The Havre Trough is opening by oblique back-arc rifting which is propagating into the continental margin of New Zealand at the Taupo Volcanic Zone. Variations of deformational style along the rift axis have been investigated by comparison with analogue experiments which incorporate brittle and ductile rheologies and are scaled for gravity. Based on the results of the analogue experiments, we present a tectonic model for oblique rifting in the Havre Trough, which involves the rheological contrast between oceanic and continental lithosphere and the oblique geometry of the continental margin of New Zealand with respect to the regional rift trend. The model shows that the continental margin, which is weaker than both oceanic and continental lithosphere, cannot support large shear stresses. The two lithospheres can be decoupled during extensional events along the marginal shear and, depending on the continental margin orientation, this shear can modify the regional stress field. A heterogeneous stress field will rotate normal stresses to be perpendicular or parallel to the margin. As the two lithospheres decouple during extension, the rift grabens and internal faults of the oblique rift system propagate normal to the marginal shear. This model explains the oblique trend of the Havre Trough's tectonic fabric and its relationships to the Vening Meinesz Fracture Zone which represents the oceanic/continental lithospheric boundary.As the Havre Trough rift propagates into the continental margin, rheological differences between oceanic and continental lithosphere result in variations in distribution of strain along the rift axis. Extension of oceanic sub-arc lithosphere is localized into a single rift graben. At the transition into continental rifting, the zone of extension widens into a number of rift grabens forming complex indentations into the margin. This change in deformation style is consistent with analogue experiments as well as other natural examples and results from the contrast in lithospheric rheology and its influence on the process of strain localization. 相似文献
18.
《Marine and Petroleum Geology》2003,20(3-4):287-308
This work provides new palinspastic palaeofacies reconstructions of SW Gondwana incorporating rotation of a Falkland/Malvinas microplate. We discuss the implications of this for the tectonic evolution of the southern South Atlantic and hence for the regional hydrocarbon potential.Existing Gondwana reconstructions display good fits of major continents but poorly constrained fits of microcontinents. In most continental reconstructions, the Falkland/Malvinas Plateau was assumed to be a rigid fragment of pre-Permian South American crust. However, it has been suggested, on the basis of palaeomagnetic data, that the Falkland/Malvinas Islands were rotated by ∼180° after 190 Ma. This rotation hypothesis has been successfully tested on the basis of Devonian stratigraphy and palaeontology, Permian stratigraphy and sedimentology and Late Palaeozoic and Early Mesozoic structure, making it unlikely that the plateau behaved as a rigid structure during breakup. We have explored the consequences of accepting this hypothesis for the tectonic evolution of SW Gondwana by compiling new palaeogeographic maps for the Permian–Cretaceous of the southern Atlantic area. To achieve a realistic close fit, we have devised a pre-rift proxy for the ocean–continent boundary for the South Atlantic. In order to produce the best fit, it is necessary to subdivide South America into four plates. The consequences of this are far-reaching. Our work suggests that although sedimentary basins were initiated at different times, three major tectonic phases can be recognised; in regional terms these can be thought of as pre-, syn- and post-rift.During the pre-rift time (until the Late Triassic), the area was dominated by compressional tectonism and formed part of the Gondwana foreland. The Falkland/Malvinas Islands lay east of Africa, the Falkland/Malvinas Plateau was ∼33% shorter and Patagonia was displaced east with respect to the rest of South America, in part along the line of the Gastre Fault System. Potential source facies are dominantly post-glacial black shales of Late Permian age deposited in lacustrine or hyposaline marine environments; these rocks would also be an effective regional seal. Sandstones deposited in the Late Permian would be dominantly volcaniclastic with poor reservoir qualities; Triassic sandstones tend to be more mature.There was significant extension from about 210 Ma (end-Triassic) until the South Atlantic opened at about 130 Ma (Early Cretaceous). In the early syn-rift phase, extension was accompanied by strike-slip faulting and block rotation; later extension was accompanied by extrusion of large volumes of lava. Early opening of the South Atlantic was oblique, which created basins at high angle to the trend of the ocean on the Argentine margin, and resulted in microplate rotation in NE Brazil. Intermittent physical barriers controlled deposition of Upper Jurassic–Cretaceous anoxic sediments during breakup; some of these mudrock units are effective seals with likely regional extent. During crustal reorganisation, clastic sediments changed from a uniform volcaniclastic provenance to local derivation, with variable reservoir quality.In the late rift and early post-rift phase, continental extension changed from oblique to normal and basins developed parallel to the continental margins of the South Atlantic. This change coincides with the main rifting in the Equatorial basins of Brazil and the early impact of the Santa Helena Plume. It resulted in widespread development of unconformities, the abandonment of the Recôncavo–Tucano–Jatoba rift and the end of NE Brazil plate rotation, which remained attached to South America. There was extensive deposition of evaporites, concentrated in (but not restricted to) the area north of the Rio Grande Rise/Walvis Ridge.Widespread deposits can be used to define potential regional elements of hydrocarbon systems and to provide a framework for relating more local elements. Our main conclusion is that the regional hydrocarbon potential of the southern South Atlantic has been constrained by the tectonic evolution. 相似文献
19.
A wealth of geologic information has been collected during studies of the Matuyama/Brunhes magnetic reversal boundary on the East Pacific Rise at 21°N. Five ALVIN and two CYANA dives, and a series of deep-tow traverses show that abyssal hills in this region of the Pacific are created near the spreading axis by inward dipping normal faulting and by back-tilting of these fault blocks. Outward dipping faults occur but are of less importance in the creation of relief. Tectonic disruption of the crust, particularly through tilting, is less pronounced than in the Atlantic. Small volcanoes approximately 50 m high and 400 m wide are common on the abyssal hills. A significant number of the volcanoes may have split apart at the spreading axis attesting to the narrowness of the crustal accretion zone on the East Pacific Rise. Active faulting is restricted to less than 10 to 12 km off-axis, although minor recent faulting may have been detected 23 km off-axis. Crustal sections exposed by faulting reveal that massive lava flows and sheet flows are common in the upper portion of oceanic layer two, but are less abundant than pillow lavas. 相似文献
20.
Rifting to Spreading Process along the Northern Continental Margin of the South China Sea 总被引：7，自引：0，他引：7
Understanding the development from syn-rift to spreading in the South China Sea (SCS) is important in elucidating the western Pacific's tectonic evolution because the SCS is a major tectonic constituent of the many marginal seas in the region. This paper describes research examining the transition from rifting to spreading along the northern margin of the SCS, made possible by the amalgamation of newly acquired and existing geophysical data. The northernmost SCS was surveyed as part of a joint Japan-China cooperative project (JCCP) in two phases in 1993 and 1994. The purpose of the investigation was to reveal seismic and magnetic characteristics of the transitional zone between continental crust and the abyssal basin. Compilation of marine gravity and geomagnetic data of the South China Sea clarify structural characteristics of its rifted continental and convergent margins, both past and present. Total and three component magnetic data clearly indicate the magnetic lineations of the oceanic basin and the magnetic characteristics of its varied margins. The analyses of magnetic, gravity and seismic data and other geophysical and geological information from the SCS led up to the following results: (1) N-S direction seafloor spreading started from early Eocene. There were at least four separate evolutional stages. Directions and rates of the spreading are fluctuating and unstable and spreading continued from 32 to 17 Ma. (2) The apparent difference in the present tectonism of the eastern and western parts of Continent Ocean Boundary (COB) implies that in the east of the continental breakup is governed by a strike slip faulting. (3) The seismic high velocity layer in the lower crust seems to be underplated beneath the stretched continental crust. (4) Magnetic anomaly of the continental margin area seems to be rooted in the uppermost sediment and upper part of lower crust based on the tertiary volcanism. (5) Magnetic quiet zone (MQZ) anomaly in the continental margin area coincides with COB. (6) The non-magnetic or very weakly magnetized layer is probably responsible for MQZ. One of the causes of demagnetization of the layer is due to hydrothermal alteration while high temperature mantle materials being underplated. Another explanation is that horizontal sequences of basalt each with flip-flop magnetization polarity cancel out to the resultant magnetic field on the surface. We are currently developing a synthetic database system containing datasets of seismicity, potential field data, crustal and thermal structures, and other geophysical data to facilitate the study of past, contemporary and future changes in the deep sea environment around Japan; i.e. trench, trough, subduction zones, marginal basins and island arcs. Several special characteristics are an object-oriented approach to the collection and multi-faceted studies of global data from a variety of sources. 相似文献