共查询到20条相似文献，搜索用时 0 毫秒
1.
The deep lacustrine gravity-flow deposits are widely developed in the lower Triassic Yanchang Formation, southeast Ordos Basin, central China. Three lithofacies include massive fine-grained sandstone, banded sandstone, and massive oil shale and mudstone. The massive fine-grained sandstones have sharp upper contacts, mud clasts, boxed-shaped Gamma Ray (GR) log, but no grading and Bouma sequences. In contrast, the banded sandstones display different bedding characteristics, gradational upper contacts, and fine-upward. The massive, fine-grained sandstones recognized in this study are sandy debrites deposited by sandy debris flows, while the banded sandstones are turbidites deposited by turbidity currents not bottom currents. The sediment source for these deep gravity-flow sediments is a sand-rich delta system prograding at the basin margin. Fabric of the debrites in the sandy debris fields indicates initial formation from slope failure caused by the tectonic movement. As the sandy debris flows became diluted by water and clay, they became turbidity currents. The deep lacustrine depositional model is different from the traditional marine fan or turbidite fan models. There are no channels or wide lobate sand bodies. In the lower Triassic Yanchang Formation, layers within the sandy debrites have higher porosity (8–14%) and permeability (0.1–4 mD) than the turbidites with lower porosity (3–8%) and permeability (0.04–1 mD). Consequently, only the sandy debrites constitute potential petroleum reservoir intervals. Results of this study may serve as a model for hydrocarbon exploration and production for deep-lacustrine reservoirs from gravity-flow systems in similar lacustrine depositional environments. 相似文献
2.
关于南海北部深水重力流沉积问题的讨论 总被引：1，自引：0，他引：1
深水沉积主要泛指陆架以外的沉积,尤以沉积物重力流成因的沉积受到深水油气勘探界的关注,它的沉积成因、过程和相组成均与河流、三角洲、浅海等牵引流沉积有很大的差异。当前南海北部大规模深水勘探已经全面展开,正确认识深水重力流沉积具有重要意义,但由于我国油气勘探对深水重力流沉积缺乏勘探实践,目前对深水重力流沉积有不同的理解,如深水重力流沉积一定要在多深的水下沉积,深水重力流沉积的判识一定要有深水环境的标志,深水重力流沉积作用保留在地层中的沉积层理构造特征一定是重力流流态的等。通过南海北部深水实钻资料和沉积体系的研究,认为深水重力流沉积具有偶发而动、沿坡搬运、择低而积、有限分布的特点。陆架坡折带以外的粗陆源碎屑沉积以重力流沉积成因为主,低位体系域的重力流更易于发育砂岩储层。陆坡区深水重力流沉积的特点表明储层识别是深水勘探的关键工作。 相似文献
3.
The Sergi Formation (Upper Jurassic) represents the main hydrocarbon reservoir of the Recôncavo Basin, Brazil. The basal vertical facies succession of the Sergi Formation comprises reservoirs formed by a complex fluvio–aeolian–lacustrine interaction. Facies architecture and detailed petrophysical analysis of these reservoirs have enhanced the understanding of heterogeneity at a variety of scales and has allowed the development of predictive models that describes the range of styles of mixed fluvial–aeolian reservoirs. At megascopic scale, the reservoirs are predominantly composed of sand bodies deposited by fluvial channel and aeolian facies associations. Regional flooding surfaces and sequence boundaries are their main flow barriers. The regional flooding surfaces are composed of fine-grained sediments deposited by lacustrine facies associations and the sequence boundaries act as flow barriers due to mechanically infiltrated clays. Based on its geometrical relations, reservoirs linked to fluvial–aeolian–lacustrine interaction formed two types of reservoirs at macroscopic scale: (i) with good lateral continuity of aeolian packages and relatively simple stratigraphic correlation and (ii) of highly compartmentalized aeolian packages with complex stratigraphic correlation and truncation by fluvial deposits. Mesoscopic heterogeneity reflects lithofacies, sedimentary structures, and lamina-scale variability within aeolian and fluvial facies associations. 相似文献
4.
马来盆地前I群(即J、K、L、M群,渐新统—下中新统)具有良好的油气成藏条件:①发育多期有利于成藏的构造运动:前中新世伸展断裂阶段,湖相烃源岩大量发育;早、中中新世构造沉降阶段,并伴随盆地反转,形成前I群油气系统的储盖系统;②烃源岩优越:烃源岩为湖相富含藻类的页岩,成熟度较高,有机质含量较高;③储集层丰富:K群储集层为辫状河砂岩,J群储集层为河口湾河道砂岩和潮间砂岩;④盖层良好:主要盖层为盆地海侵期沉积的前J群三角洲—浅海相泥岩,次要盖层为K、L和M群内的湖泊相泥岩;⑤油气运移通道畅通:上倾侧向运移为主;⑥有利的生储盖组合:自生自储和下生上储的组合方式有利于油气藏的形成。前I群油气系统位于马来盆地的东南部,以生油为主。分析认为盆地的油气分布主要受烃源岩的分布、质量和成熟度以及构造圈闭形成的相对时间和油气运移方式的控制。 相似文献
5.
We present field evidence from the Middle Eocene deep-marine Ainsa Basin, Spanish Pyrenees, to show channel-like features likely created by erosive subaqueous debris flows. Evidence from this basin suggests that the most erosive subaqueous debris-flows may create megascours removing up to ∼35 m thickness of sandy submarine-fan deposits from base-of-slope and lower-slope settings. This study suggests that individual debris flows may have been more erosive than turbidity currents, an observation that is opposed to many previous studies from the Ainsa Basin and other ancient deep-water clastic systems. In the Ainsa Basin, many of the debris flows deposited pebbly mudstones immediately above the basal erosion surfaces into which gouging flow-parallel grooves and pebble scours left isolated pebbles embedded in the immediately underlying sandstones. In one particularly well-exposed case, the sandstones immediately below the eroding debris flow were incorporated into it and preserved as sheared, disaggregated, brecciated, and partially liquefied sandstone beds within the pebbly mudstone. Our study suggests that erosion by large-volume debris flows in base-of-slope settings can be at least as important, if not more so, than turbidity currents in producing submarine megascours (probably chutes that, in cross section, superficially resemble submarine channels). This has important implications for understanding the erosivity of debris flows versus turbidity currents in modern and ancient environments, and it has significant implications for hydrocarbon reservoir continuity and heterogeneity, including the origin and recognition of mudstone-filled chutes or channels. 相似文献
6.
应用盆地原形分析、区域地震资料解释和石油地质综合分析等方法,探讨了赤道几内亚里奥穆尼盆地构造演化和成藏条件。研究结果表明,该盆地构造演化经历了裂谷、过渡—漂移和裂后被动大陆边缘3个阶段,主要充填了中新生代沉积地层,中生界白垩系主要发育2套烃源岩,为裂谷期的湖相泥页岩和过渡—早期漂移期的海相泥页岩,已发现的油气主要储集在上白垩统浊积砂体。盐构造和重力滑动构造是油气成藏的主控因素,在区域上,油气主要分布在盆地的中带,该带勘探程度低,成藏条件优越,是油气聚集的有利场所,尤其盐构造与重力滑动构造区具有较大油气勘探潜力。 相似文献
7.
Shanshan Zhou Youchuan Li Jianping Li Wenjing Ding Xin Li Weilai Zhang 《海洋学报(英文版)》2023,42(3):138-150
The terrigenously-dominated marine shales which were deposited in the lower Eocene Pinghu Formation were thought to be a potential source rock in the Xihu Depression of the East China Sea Shelf Basin. However, the exceptionally high total organic carbon content (TOC, >6% on average) of the tidal sand ridge samples was not compatible with their sedimentary environment, indicating coal-bearing sedimentary debris may have been transferred from the coast to the ocean. In this study, new sights into the origins and supply of organic materials in the coastal environment were proposed in the neritic organic matter of the Eocene Pinghu Formation. A discriminant model was developed using plynofacies analysis data to pinpoint the source of organic materials in marine source rocks. The discrimination results suggested that marine mudstones were associated with tidal flat mudstones rather than deltaic ones. The biomarker characteristics of mudstones deposited in various environments support this assertion, indicating that the supply of plant materials in tidal flats is the primary organic matter source for the marine environment. The organic matter abundance was elevated in tidal flats due to their superior preservation conditions. Additionally, the lithological assemblage of tidal flats suggests that tidal currents can scour marshes and then transport dispersed terrigenous organic materials to neritic areas. These findings indicate that coal-bearing sedimentary debris was likely transferred from the coast to the ocean, and tidal currents are thought to be the dominant mechanism driving organic matter from the tidal to the marine environment. 相似文献
8.
《Marine and Petroleum Geology》2003,20(6-8):733-755
The marine fill of ancient foreland basins is primarily recorded by depositional systems consisting of facies and facies associations deposited by a variety of sediment gravity flows in shallow-marine, slope and basinal settings. Tectonism and climate were apparently the main factors controlling the sediment supply, accommodation and depositional style of these systems. In marginal deltaic systems, sedimentation is dominated by flood-generated hyperpycnal flows that build up impressive accumulations of graded sandstone beds in front of relatively small high-gradient fan-deltas and river deltas. During periods of tectonically forced lowstands of sealevel, these systems may commonly shift basinward to shelfal and slope regions. Instability along the edges of these lowstand deltas and sand-laden hyperpycnal flows generate immature and coarse-grained turbidite systems commonly confined within structural depressions and generally encased in distal delta-front and prodeltaic deposits. Because of the close vertical and lateral stratigraphic relations between deltaic and turbidite-like facies, these marginal systems are herein termed ‘mixed depositional systems’. They are very common in the fill of foreland basins and represent the natural link between deltaic and basinal turbidite sedimentation.Basinal turbidite systems form in deeper water elongate highly subsiding troughs (foredeeps) that developed in front of advancing thrust systems. The impressive volumes of sheet-sandstones that form the fill of these troughs suggest that basinal turbidite systems are likely to form following periods of dramatic tectonic uplift of adjacent orogenic wedges and related high-amplitude tectonically-forced sealevel lowstands. In such deep basinal settings, sediment flux to the sea is dramatically increased by newly formed sediment in fluvial drainage basins and the subaerial and submarine erosion of falling-sealevel deltaic deposits generated during the uplift. Turbidity currents are very likely to be mainly triggered by floods, via hyperpycnal flows and related sediment failures, but can fully develop only in large-scale erosional conduits after a phase of catastrophic acceleration and ensuing bulking produced by bed erosion. This process leads to deepening and widening of the conduits and the formation of large-volume highly efficient bipartite currents whose energy dissipation is substantially reduced by the narrow and elongate basin geometry. These currents can thus carry their sediment load over considerable distances down the basin axis. 相似文献
9.
Delta-front sand bodies with large remaining hydrocarbon reserves are widespread in the Upper Cretaceous Yaojia Formation in the Longxi area of the Western Slope, Songliao Basin, China. High-resolution sequence stratigraphy and sedimentology are performed based on core observations, well logs, and seismic profile interpretations. An evaluation of the reservoir quality of the Yaojia Formation is critical for further petroleum exploration and development. The Yaojia Formation is interpreted as a third-order sequence, comprising a transgressive systems tract (TST) and a regressive systems tract (RST), which spans 4.5 Myr during the Late Cretaceous. Within this third-order sequence, nine fourth-order sequences (FS9–FS1) are recognized. The average duration of a fourth-order sequence is approximately 0.5 Myr. The TST (FS9–FS5) mostly comprises subaqueous distributary channel fills, mouth bars, and distal bars, which pass upward into shallow-lake facies of the TST top (FS5). The RST (FS4–FS1) mainly contains subaqueous distributary-channel and interdistributary-bay deposits. Based on thin-sections, X-ray diffraction (XRD), scanning electron microscope (SEM) and high-pressure mercury-intrusion (HPMI) analyses, a petrographic study is conducted to explore the impact of the sedimentary cyclicity and facies changes on reservoir quality. The Yaojia sandstones are mainly composed of lithic arkoses and feldspathic litharenites. The sandstone cements mostly include calcite, illite, chlorite, and secondary quartz, occurring as grain coating or filling pores. The Yaojia sandstones have average core plug porosity of 18.55% and permeability of 100.77 × 10−3 μm2, which results from abundant intergranular pores and dissolved pores with good connectivity. Due to the relatively coarser sediments and abundant dissolved pores in the feldspars, the FS4–FS1 sandstones have better reservoir quality than the FS9–FS5 sandstones, developing relatively higher porosity and permeability, especially the FS1 and FS2 sandstones. The source–reservoir–cap-rock assemblages were formed with the adjoining semi-deep lake mudstones that were developed in the Nenjiang and Qingshankou Formations. This study reveals the deposition and distribution of the delta-front sand bodies of the Yaojia Formation within a sequence stratigraphic framework as well as the factors controlling the Yaojia sandstones reservoir quality. The research is of great significance for the further exploration of the Yaojia Formation in the Longxi area, as well as in other similar lacustrine contexts. 相似文献
10.
The middle Permian Lucaogou Formation in the Jimusaer Sag of the southeastern Junggar Basin, NW China, was the site of a recent discovery of a giant tight oil reservoir. This reservoir is unusual as it is hosted by lacustrine mixed dolomitic-clastic rocks, significantly differing from other tight reservoirs that are generally hosted by marine/lacustrine siliciclastic–calcitic sequences. Here, we improve our understanding of this relatively new type of tight oil reservoir by presenting the results of a preliminarily investigation into the basic characteristics and origin of this reservoir using field, petrological, geophysical (including seismic and logging), and geochemical data. Field and well core observations indicate that the Lucaogou Formation is a sequence of mixed carbonate (mainly dolomites) and terrigenous clastic (mainly feldspars) sediments that were deposited in a highly saline environment. The formation is divided into upper and lower cycles based on lithological variations between coarse- and fine-grained rocks; in particular, dolomites and siltstones are interbedded with organic-rich mudstones in the lower part of each cycle, whereas the upper part of each cycle contains few dolomites and siltstones. Tight oil accumulations are generally present in the lower part of each cycle, and dolomites and dolomite-bearing rocks are the main reservoir rocks in these cycles, including sandy dolomite, dolarenite, dolomicrite, and a few dolomitic siltstones. Optical microscope, back scattered electron, and scanning electron microscope imaging indicate that the main oil reservoir spaces are secondary pores that were generated by the dissolution of clastics and dolomite by highly acidic and corrosive hydrocarbon-related fluids. 相似文献
11.
The Upper Triassic — Lower Jurassic Kap Stewart Formation (Jameson Land, East Greenland) has been studied by a combination of sedimentological and organic geochemical methods (LECO/Rock Eval, sulphur, gas chromatography) in order to assess the hydrocarbon source potential of the abundant and extensive lacustrine shale intervals present in the formation.The organic matter in the shales is a mixture of algal and higher plant remains (type I and III kerogen). An organic assemblage dominated by algal material, having a rich oil potential, occurs in an interval approximately 10–15 m thick in the uppermost part of the formation. This interval has an organic carbon content up to 10% and Hydrogen Index values up to 700. The interval is consistently traceable along the exposed margins and the central part of the basin. The deposition of the uppermost shale interval coincided with the largest expansion of the lake, during a period with a stratified water column and anoxic bottom-water conditions.Locally the rocks exposed are thermally postmature due to the thermal influence of dolerite sills which intruded the Kap Stewart Formation in Tertiary time. However, the organic-rich shale interval is beyond the influence of the sills and indicates a maturity prior to or in the early stages of oil generation.Calculations of the generative potential of the lacustrine source rocks suggest that significant amounts of petroleum may have been generated in those sediments which have undergone sufficient burial in the southern and central part of the basin. Here, the contemporaneously deposited delta front and barrier island sandstones can thus be considered as potential targets for future hydrocarbon exploration. This type of play may also be of importance in other North Atlantic basins with a similar basin history. 相似文献
12.
Coals are oil source rocks in many of the Tertiary basins of Southeast Asia. The precursors of these hydrogen rich and oxygen poor coals are coastal plain peats which have mainly developed in an everwet and tropical climate. In these environments water flow and reworking can concentrate liptinitic kerogen in preference to vitrinitic kerogen. The distribution, petrography and chemistry of the coaly Miocene source rocks present in the Kutai Basin are described. The recognition of environmental controls on the accumulation of potentially oil-prone coals and coaly shales in deltaic environments is an aid to predictive source bed recognition in petroleum exploration. Comments on the environment of deposition of coaly sediments in the basins of the Norwegian Sea are discussed with reference to their possible oil and/or gas sourcing potential. The Triassic - Jurassic coals of the Haltenbanken area may become more oil-prone towards the delta margins, and facies mapping could aid oil exploration in this area. 相似文献
13.
南黄海盆地北部坳陷北凹是一个大中型的中、新生代沉积凹陷,经过四十余年的油气勘探,至今仍无商业油气发现,仅发现诸城1-2一个含油气构造.北凹的油气勘探存在诸多问题,其中是否发育优质烃源岩、烃源岩能否生烃、油气是否运移至储层是关系到北凹油气勘探的基础地质问题.在对北凹主要烃源岩分析评价的基础上,采用流体包裹体系统分析技术,对北凹油气成藏特征展开研究.研究认为,北凹存在白垩系泰二段主力烃源岩,为中深湖相,生烃指标较好,分布面积较大,且现今已经成熟并排烃,生烃中心位于ZC-A井区.油气通过断裂发生垂向运移,已充注至始新统戴南组储层.流体包裹体荧光观察结果及显微测温结果均表明戴南组至少存在两期油充注,第一期发生在35 Ma左右,第二期为现今. 相似文献
14.
An understanding of the paleoenvironment and the main sedimentary processes behind preserved deposits is crucial to correctly interpret and represent lithofacies and facies associations in geomodels that are used in the hydrocarbon industry, particularly when a limited dataset of cores is available. In this paper a fairly common facies association is discussed containing massive sands - here defined as thick (>0.5 m) structureless sand beds devoid of primary sedimentary structures, or with some faint lamination - deposited by mass failures of channel banks in deep fluvial and estuarine channels. Amongst geologists it is generally accepted that liquefaction is the main trigger of large bank failures in sandy subaqueous slopes. However, evidence is mounting that for sand deposits a slow, retrogressive failure mechanism of a steep subaqueous slope, known as breaching, is the dominant process. A model of breaching-induced turbidity current erosion and sedimentation is presented that explains the presence of sheet-like massive sands and channel-like massive sands and the sedimentary structures of the related deposits. Sheet-like packages of spaced planar lamination that are found together with massive sand bodies in deposits of these environments are identified as proximal depositional elements of breach failure events. The model, acquired from sedimentary structures in deposits in the Eocene estuarine Vlierzele Sands, Belgium, is applied to outcrops of the Dinantian fluvial Fell Sandstone, England, and cores of the Tilje and Nansen fms (Lower Jurassic, Norwegian Continental Shelf). The possible breach failure origin of some other massive sands described in literature from various ancient shallow water environments is discussed. Breach failure generated massive sands possibly also form in deep marine settings. The potentially thick and homogeneous, well-sorted sand deposits bear good properties for hydrocarbon flow when found in such an environment. However, in case of deposition in an estuarine or fluvial channel, these sand bodies are spatially constricted and careful facies interpretation is key to identifying this. When constructing a static reservoir model, this needs to be considered both for in-place volume calculations as well as drainage strategies. 相似文献
15.
16.
The lacustrine black shales in the Chang7 Member from the Upper Triassic Yanchang Formation of the Ordos Basin in Central China are considered one of the most important hydrocarbon source rocks. However, the mechanism of organic accumulation in the black shales remains controversial. To resolve the controversy, with the former paleontological data of Yanchang Formation and sedimentation rate data of the Chang7 black shales, we investigated the typical intervals of the Chang7 black shales (TICBS) which were obtained by drilling in Yaowan at the southern margin of the Ordos Basin and performed various sedimentary, isotopic and geochemical analysis, including the sedimentary petrography, pyrite morphology, total organic carbon (TOC) and total sulfur (TS), the ratio of pyritic Fe to total Fe (DOPT), major and trace elements, together with pyritic sulfur isotopes (δ34Spy). The high sulfur content, enrichment of redox-sensitive trace metals, and the lower sedimentation rate of the TICBS in addition to the presence of marine spined acritarchs and coelacanth fossils indicate that the TICBS were deposited in a lacustrine environment possibly influenced by seawater. The petrographic observations show a thick layer of black shale with interlayers of thin layered siltstone (silty mudstone) and laminated tuff, which were related to the turbidity currents and volcanism, respectively. The U/Th, C-S, and Mo-U covariations, pyrite morphology, DOPT, combined with the δ34Spy, suggest that the deposition occurred beneath the anoxic-sulfidic bottom waters, which was intermittently influenced by the oxygen-containing turbidity. The Ni/Al and Cu/Al possibly show extremely high to high primary productivity in the water column, which might be connected with the substantial nutrients input from seawater or frequently erupted volcanic ash entering the lake. In addition, the coincidence of an increased abundance of TOC with increased P/Al, Ni/Al, Cu/Al and U/Th, as well as relatively consistent Ti/Al suggest that the accumulation of the organic matter might be irrelevant to the clastic influx, and was mainly controlled by the high primary productivity and anoxic-sulfidic conditions. Further, the covariations of TOC vs. P/Al and TOC vs. Ba/Al indicate that the high primary productivity led to the elevated accumulation and burial of organic matter, while the anoxic to sulfidic conditions were likely resulted from an intense degradation of the organic matter during the early diagenesis. In summary, the organic matter accumulation is ultimately attributed to the high primary productivity possibly resulted from seawater or volcanic ash entering the lake. 相似文献
17.
The Triassic Yanchang Formation is the main source rocks for Mesozoic oil in Ordos Basin. The formation includes 10 oil-bearing beds (Ch 1–Ch 10), that each can be further divided into two to three intervals. Abundant C12–C14 and C15–C16 bicyclic alkanes have been detected in the formation in the Xifeng oilfield, Ordos Basin. The C12–C14 group is dominated by C12 and C13, and the C15–C16 group contains abundant C15. The groups show three distribution patterns: A) the C12–C14 group is the major component in the non-source rocks of the Ch 7-1 and Ch 8-1 intervals; B) both groups are abundant and are common in source rocks of the Ch 7-3 interval; and C) the C15–C16 group is the major component in source rocks of the Ch 7-3 interval and also in sediments that contain type Ⅰ or partial sapropel type Ⅱ1 organic matter (OM) in the Ch 7-2 and Ch 8-1 intervals. Although thermal maturities of the source rocks in the Ch 7 section are similar, they show significant differences with respect to the drimane isomerisation index, which indicates that the drimane rearrangement is controlled by thermal evolution of the sediments, but may also be closely related to the depositional environment. This study determined that reducing environments are more conducive to preservation of drimane than oxic environments. The drimane isomerisation index and the value of the hopane parameter Tm/Ts are positively correlated. The parameter Tm/Ts varies over a wide range within the sequence, and the large variations may be a result of terrigenous OM input by turbidity currents and/or gravity flows, mixed with the autochthonous sediments. Abundant homodrimane in both source rocks may reflect reducing environments in deep lakes and major input of higher plant OM. Organic-rich shale and oil shale in the Ch 7-3 interval of the Yanchang Formation are the primary sources of oil in reservoirs in the Xifeng area. The crude oil is rich in bicyclic alkanes that are dominated by C15–C16 as source rocks with pattern C for bicyclic alkanes, which indicates an origin mainly from the Ch 7-3 interval. The main peaks in all of the crude oils are associated with 8β(H)-drimane and lower abundance of rearranged drimane. However, most of the source rocks have a main peak associated with 8β(H)-homodrimane or rearranged drimane. Weak microbial action, selective degradation and water washing may be the cause of the significant difference in bicyclic sesquiterpane composition between the crude oil and the source rocks. The result suggests that oil-source correlations based on the bicyclic sesquiterpanes are questionable. 相似文献
18.
环境磁学某些研究进展评述 总被引：21，自引：2，他引：19
环境磁学是应用岩石磁学和矿物磁学技术去恢复环境过程、重塑环境演化历史的一门边缘科学。沉积环境中磁性矿物的形成、搬运、沉积和演化受气候变化和环境过程的控制,因此,岩石和矿物磁学性质可作为环境变化和气候过程的代用指标。环境磁学能为全球环境变化、气候过程研究提供有价值的资料。鉴于环境磁学方法在古环境和古气候研究中的重要作用。本文对当前黄土、湖泊沉积物和海洋喾物环境磁学研究的一些进展作简要评述。 相似文献
19.
Tectonic significance of syn-rift sediment packages across the Gabon-Cabinda continental margin 总被引：1，自引：0，他引：1
Garry D. Karner Neal W. Driscoll John P. McGinnis William D. Brumbaugh Nick R. Cameron 《Marine and Petroleum Geology》1997,14(7-8)
The tectonic development of a continental margin is recorded in the stratigraphic successions preserved along and across the margin in terms of stratal relationships (e.g., onlap, downlap, truncation), lithofacies, biostratigraphy, and paleo-water depths. By using these observations coupled to a kinematic and flexural model for the deformation of the lithosphere, we have elucidated the tectonic significance of the preserved stratigraphy that comprises the Gabon-Cabinda margin of west Africa. Two hinge zones, an Eastern and Atlantic, formed along the Gabon-Cabinda margin in response to three discrete extensional events occuring from Berriasian to Aptian time. The Eastern hinge zone demarcates the eastern limit of a broadly distributed Berriasian extension that resulted in the formation of deep anoxic, lacustrine systems as evidenced by the silts and shales of the Sialivakou and lower Djeno Formations and the regressive packages of the upper Djeno Formation. Approximately 1.5 to 2 km of asymmetric footwall uplift was induced across the Eastern hinge zone in response to the mechanical unloading of the lithosphere during this first phase of rifting. In contrast, the Atlantic hinge, located approximately 90 km west of the Eastern hinge, marks the eastern limit of a second phase of extension that began in the Hauterivian. Footwall uplift and rotation exposed earlier syn-rift and pre-rift sediments to at least wavebase causing varying amounts of erosional truncation across the Atlantic hinge zone along much of the Gabon-Cabinda margins. We interpret the thickness variations of reworked clastic sediment of this age (e.g. the Melania Formation) between the hinge zones as indicative of variations in the degree of uplift and erosional truncation of the Atlantic hinge. For example, the absence of Melania Formation across the Congo margin implies that uplift of the Atlantic hinge was relatively minor compared to that across the Cabinda and Gabon margins, the latter being characterized by significant thicknesses of Melania Formation (or equivalent). Material eroded from the Cabinda and Gabon Atlantic hinge zone may in part account for the thick wedge of sediment deposited seaward of the Gabon-Cabinda Atlantic hinge (the Erva Formation). Our modelling suggests that this wedge of reworked elastics represents deposition by along-axis gravity flows within a deep water (≈2 km) environment. A third and final phase of extension in the late Barremian-early Aptian was responsible for breaching the continental lithosphere to form the ocean/continent boundary and thus the installation of open marine conditions. Elsewhere, the environments will tend to be marginal marine to brackish, depending on the efficiency of the Atlantic hinge zone to act as a barrier to marine enchroachment. This third rift phase reactivated both the Eastern and Atlantic hinge0zones thereby creating accomodation for the Marnes Noires Formation (and equivalent) source rock deposition between the hinges and the Falcão source rock equivalent seaward of the Atlantic hinge. Two possible scenarios exist for the lateral distribution of the Marnes Noires Formation. If the reactivated rift flank topography across the Atlantic hinge was significant, then sedimentation would be restricted between the hinge zones within discrete lacustrine settings (e.g., Congo margin). Alternatively, if hinge zone uplift was relatively minor, then a coral-rimmed archipelago may have developed parallel to the margin with restricted communication across the Atlantic hinge zone (e.g., Cabinda margin). In this latter scenario, dilution of the Marnes Noires source rocks by terrigenous input from the eroding Atlantic hinge zone should be relatively minor thereby enhancing source rock quality. Furthermore, potential marine upwelling outboard of the Atlantic hinge zone is likely the cause for the production and accumulation of organic-rich material associated with the Falcão source rock of the Kwanza basin. By late Aptian time, the remaining accomodation between the hinge zones was partially filled by across- and along-axis prograding deltaic systems of the Argilles Vertes and Tchibota Formations. The progradation and interaction of the Argilles Vertes depositional lobes resulted in the formation of residual paleo-relief. Subsequent marine incursions and flooding of this paleo-relief led to the development of basal conglomerates (the Chela ‘lag’ unconformity) grading upward into fine-grained sands and evaporites. Consequently, an inverse relationship should exist betweeb evaporite thickness (in particular, the lower members) and the thickness of the underlying Argilles Vertes and Tchibota Formations. Variations in Loeme evaporite thickness is a consequence of stratigraphic and structural control with salt instability influencing local variability.Our modelling suggests the occurrence of two distinct evaporite sequences on the Congo margin, an earlier evaporite deposited seaward (west) of the Atlantic hinge during the second and third rift phases and the late Aptian Loeme Formation deposited between the hinge zones. An evaporite sequence seaward of the Atlantic hinge is inferred on the basis of extensive diapirs and salt tectonic structures observed in seismic data. In order to match the distribution and thickness of the observed post-salt stratigraphy across the basin, however, we require large paleowater depths west of the Atlantic hinge during the later Aptian. The existence of large paleowater depths precludes the formation of thick evaporite sequences within the outer basin. Consequently, we propose that the evaporites seaward of the Atlantic hinge were formed during the syn-rift development of the margin and are not contemporaneous with the post-rift Loeme salts deposited between the hinge zones. This double salt hypothesis is consistent with observations from the conjugate Brazilian margin. 相似文献
20.
Three-dimensional (3D) seismic data acquired for hydrocarbon exploration reveal that gas accumulations are common within the
2–3 km thick Plio-Pleistocene stratigraphic column of the south-western Barents Sea continental margin. The 3D seismic data
have relatively low-frequency content (<40 Hz) but, due to dense spatial sampling, long source-receiver offsets, 3D migration
and advanced interpretation techniques, they provide surprisingly detailed images of inferred gas accumulations and the sedimentary
environments in which they occur. The presence of gas is inferred from seismic reflection segments with anomalously high amplitude
and reversed phase, compared with the seafloor reflection, so-called bright spots. Fluid migration is inferred from vertical
zones of acoustic masking and acoustic pipes. The 3D seismic volume allows a spatial analysis of amplitude anomalies inferred to reflect the presence of gas and fluids. At several locations, seismic attribute
maps reveal detailed images of flat spots, inferred to represent gas–water interfaces. The data indicate a focused fluid migration
system, where sub-vertical faults and zones of highly fractured sediments are conduits for the migration of gas-bearing fluids
in Plio-Pleistocene sediments. Gas is interpreted to appear in high-porosity fan-shaped sediment lobes, channel and delta
deposits, glacigenic debris flows and sediment blocks, probably sealed by low-permeability, clayey till and/or (glacio)marine
sediments. Gas and fluid flow are here attributed mainly to rapid Plio-Pleistocene sedimentation that loaded large amounts
of sedimentary material over lower-density, fine-grained Eocene oozes. This probably caused pore-fluid dewatering of the high-fluid
content oozes through a network of polygonal faults. The study area is suggested to have experienced cycles of fluid expulsion
and hydrocarbon migration associated with glacial–interglacial cycles. 相似文献