共查询到20条相似文献，搜索用时 296 毫秒
1.
Fine-grained sediments from the Late Triassic Yanchang Fm. in the Ordos Basin (central China) were studied by core analysis and geophysical logging. Part of the mudstones in this formation are stratified, part of them are unstratified; the various mudstones can be subdivided into eight types on the basis of their structures and textures. They represent a variety of environments, ranging from delta fronts and subaqueous fans to deep-water environments. Part of the sediments were reworked and became eventually deposited from subaqueous gravity flows, such as mud flows, turbidity currents and hyperpycnal flows that easily developed on the clay-rich deltaic slopes. The sediments deposited by such gravity flows show abundant soft-sediment deformation structures. Understanding of such structures and recognition of fine-grained sediments as gravity-flow deposits is significant for the exploration of potential hydrocarbon occurrences. Because fine-grained deposits become increasingly important for hydrocarbon exploration, and because the sediments in the lacustrine Yanchang Formation were deposited by exactly the same processes that play a role in the accumulation of deltaic and prodeltaic fine-grained sediments, the sedimentological analysis provided here is not only important for the understanding of deep lacustrine sediments like the Yanchang Formation, but also for a better insight into the accumulation of fine-grained prodeltaic deep-marine sediments and their potential as hydrocarbon source rocks and reservoir rocks. 相似文献
2.
Christopher A.-L. Jackson A. Adli Zakaria Howard D. Johnson Felix Tongkul Paul D. Crevello 《Marine and Petroleum Geology》2009,26(10):1957
The West Crocker Formation (Oligocene–Early Miocene), NW Borneo, consists of a large (>20 000 km2) submarine fan deposited as part of an accretionary complex. A range of gravity-flow deposits are observed, the most significant of which are mud-poor, massive sandstones interpreted as turbidites and clast-rich, muddy sandstones and sandy mudstones interpreted as debrites. An upward transition from turbidite to debrite is commonly observed, with the contact being either gradational and planar, or sharp and highly erosive. Based on their repeated vertical relationship and the nature of the contact between them, these intervals are interpreted as being deposited from one flow event which consisted of two distinct flow phases: fully turbulent turbidity current and weakly turbulent to laminar debris flow. The associated bed is called a co-genetic turbidite–debrite, with the upper debrite interval termed a linked debrite. Linked debrites are best developed in the non-channellised parts of the fan system, and are absent to poorly-developed in the proximal channel-levee and distal basin floor environments. Due to outcrop limitations, the genesis of linked debrites within the West Crocker Formation is unclear. Based on clast size and type, it seems likely that a weakly turbulent to laminar debris-flow flow phase was present when the flow event entered the basin. A change in flow behaviour may have led to deposition of a sand-rich unit with ‘turbidite’ characteristics, which was subsequently overlain by a mud-rich unit with ‘debrite’ characteristics. Flow transformation may have been enhanced by the disintegration and incorporation into the flow of muddy clasts derived from the upstream channel floor, channel mouth or from channel-levee collapse. Lack of preservation of this debrite in proximal areas may indicate either bypass of this flow phase or that the available outcrops fail to capture the debris flow entry point. Establishing robust sedimentological criteria from a variety of datasets may lead to the increasing recognition of co-genetic turbidite-debrite beds, and an increased appreciation of the importance of bipartite flows in the transport and deposition of sediments in deepwater environments. 相似文献
3.
The 380 m thick fine-grained Vischkuil Formation comprises laterally extensive hemipelagic mudstones, separated by packages of graded sandstone and siltstone turbidites, and volcanic ash beds, and is an argillaceous precursor to a 1 km thick sand-prone basin floor fan to shelf succession. The Vischkuil Formation provides an insight into the process by which regional sand supply is initiated and for testing sequence stratigraphic principles in a basin plain setting. Regionally mapped 1–2 m thick hemipelagic mudstone units are interpreted as condensed drapes that represent the starved basin plain equivalents of transgressive systems tracts and maximum flooding surface on the coeval shelf (now removed during later uplift). The section above each mudstone drape comprises siltstone turbidites interpreted as highstand systems tract deposits and a surface of regional extent, marked by an abrupt grain size shift to fine sandstone. These surfaces are interpreted as sequence boundaries, related to abrupt increases in flow volume and delivery of sand grade material to the basin-plain. The interpreted lowstand systems tract comprises sandstone-dominated turbidites and is overlain by another hemipelagic mudstone drape. The upper Vischkuil Formation is marked by three 20–45 m thick debrites, with intraformational sandstone clasts up to 20 cm in diameter that can be mapped over 3000 km2. In each case, debrite emplacement resulted in widespread deformation of the immediately underlying 3–10 m of silty turbidites. A sequence boundary is interpreted at the base of each deformation/debrite package. Six depositional sequences are recognised and the interfered energy shift across each successive sequence boundary and LSTs include a larger volume of sandstone increases up section. The lower two sequences thin to the NW and show NW-directed palaeocurrents. The four overlying sequences show a polarity switch in palaeocurrent directions and thinning, to the E and SE. Sequence 6 is overlain sharply by the 300 m thick sandstone dominated Fan A of the Laingsburg Formation. The LST debrites may indicate gradual development of major routing conduits that subsequently fed Fan A. The polarity shift from westward flowing turbidity currents to an eastward prograding deepwater to shelf system represents establishment of a long term feeder system from the west. Sand supply to the Karoo basin floor was established in an incremental, stepwise manner. Given the early post-glacial setting in an icehouse climate, glacio-eustatic sea-level changes are considered to have been the main control on sequence development. 相似文献
4.
Deep-water gravity-flow sandstones are important hydrocarbon exploration and production targets in the Bohai Bay Basin, a Paleogene intra-continental rift basin in eastern China. In this paper, the seismic-sedimentology techniques are used to characterize, in plan view, the temporal and spatial evolution of a gravity-flow-channel complex of the Paleogene Shahejie Formation (Es) on the Qinan faulted-monoslope (Qinan Slope), Bohai Bay Basin. The results show that two or three gravity-flow channels, 9–12 km long and 0.5–2 km wide, were successively developed in later Es (Es1z–Es1s). The channels initially experienced westward migration and then shifted eastward. The corresponding wireline logs of the channel-fill sequences mainly present blocky-shaped or bell-like configurations, whereas their seismic profile features are characterized by strong amplitude reflections, such as U-shaped, plate-like, spindle-shaped and lenticular configurations.The syndepositional activity of three normal faults, i.e., the Nandagang Fault to the northwest, the Zhangbei Fault to the northeast and the Zhaobei Fault to the east led to gradient changes of the Qinan Slope, which have controlled the plan morphology (width, curvature, and bifurcation) of the gravity-flow channels. In the medium-late period of Es1z, triggered by intensive faulting on the three faults, the gradient of the Qinan Slope was steepened abruptly, resulting in an increase of flow velocity and erosion amplitude to underlying deposits. As a result, channels exhibiting narrow and straight configurations in plan view were formed. During the stage of early Es1z and Es1s, tectonic activity intensity was relatively low and the gradient of the Qinan Slope was gentle, so channels with great width and curvature were bifurcated and merged downstream.Comparison of the faulting amplitude of the three syndepositional faults suggests that the Nandagang and Zhaobei faults were inversely strengthened in the Es1z and Es1s. The Nandagang Fault to the west was found to be more active than the Zhaobei Fault to the east in the Es1z stage. This condition was reversed in Es1s. For that reason, the channels migrated to the west in the Es1z stage and then went back to the east during Es1s.Core analysis shows that the channel fills are mainly composed of sandy-debrites, slumps and turbidites. Among them, sandy debrites dominate deposition in terms of reservoir volume and hydrocarbon potential. These units primarily consist of sandstones and gravel-bearing sandstones, with bed thicknesses ranging from 10 to 40 m, an average porosity of 11% and a permeability of 25 mD. Being mostly encased in organic-rich dark mudstones, these sandy debrites are significant hydrocarbon exploration targets.The results of this study are not only useful to the hydrocarbon exploration and development planning for the Qinan Slope, but also helpful when considering other faulted-depressions in the Bohai Bay Basin and other intra-continent rifted basins around the world, particularly in terms of gravity-flow hydrocarbon exploration and research. 相似文献
5.
Massive mudrock refers to mudrock with internally homogeneous characteristics and an absence of laminae. Previous studies were primarily conducted in the marine environment, while notably few studies have investigated lacustrine massive mudrock. Based on core observation in the lacustrine environment of the Jiyang Depression, Bohai Bay Basin, China, massive mudrock is a common deep water fine-grained sedimentary rock. There are two types of massive mudrock. Both types are sharply delineated at the bottom and top contacts, abundant in angular terrigenous debris, and associated with oxygen-rich (higher than 2 ml O2/L H2O) but lower water salinities in comparison to adjacent black shales. In addition, type 1 is laterally isolated and contains abundant sand injections and contorted layers formed in the depositional process, but type 2 exactly distributes in the distal part of deep water gravity-driven sandstone units, and shows scoured bases, high-angle mineral crytsals, and fining-upward trend. It is suggested that type 1 is a muddy mass transport deposit (MMTD) formed by slide, slump, and/or debris flow, and type 2 is a turbiditic mudrock deposited by settling from dilute turbidity currents. A warm and humid climate and high subsidence rate are two main triggering events. Because of its mass movement nature, MMTD preserves the mineralogic composition and organic matter characteristics of the source sediment. By contrast, dilute turbidity currents are able to greatly entrain biochemically-formed micrite and planktonic organisms from the water column, and deposit them in the turbiditic mudrock. Because of their different ability to deposit organic matter, MMTD have poor or fair source rock potential, but the turbiditic mudrock is able to be a potentially effective source rock. The minerals in the massive mudrock are disorganized and chaotic, which cause fractures to develop in various directions, thereby, enhancing the vertical migration of oil and gas molecules to horizontal wellbore in shale reservoir exploitation. 相似文献
6.
Lacustrine deep-water turbidite plays are a novel area for exploration in the Huimin Depression, Bohai Bay Basin. Turbidites in the Shang 847 block, a typical turbidite play in the Huimin Depression, provide an opportunity to study the factors controlling the reservoir properties and hydrocarbon accumulation in lacustrine turbidite sandstones. The reservoir quality of turbidite sandstones (very fine-grained, moderately to well sorted, mainly lithic arkose) in this study area are mainly controlled by the distribution patterns of carbonate cements and pseudomatrix. Significant inverse relationships exist between the volume of carbonate cement and both porosity and permeability of the turbidite sandstones. Carbonate cement is located preferentially near the margins of the sandstone bodies. Sandstones with distance from the sandstone–mudstone contact surface less than 0.7 m or with thickness less than 1.2 m are commonly tightly cemented (carbonate cement >15%) with low porosity and permeability (lower than 10% and 0.1 mD, respectively). The source of carbonate cement was most likely external, probably derived from the surrounding mudstone. Most pore-filling carbonate cements occurred during late diagenesis at burial depths greater than 2200 m. The petrophysical properties of turbidites have a positive relationship with the content of kaolinite and chlorite, but have a negative relationship with the content of illite. 2-D and 3-D reconstructions of non-oil bearing and oil-bearing layers indicate that dissolution of carbonate cement, feldspars and unstable rock fragments was more developed in oil-bearing layers than in non-oil bearing layers and hance oil-bearing layers have higher porosity and larger pore sizes. Petrophysical property appears to have a significant effect on the hydrocarbon accumulation in the turbidite sandstones. Sandstones with porosities lower than 9% and/or permeabilities lower than 0.78 mD are not prone to contain oil. 相似文献
7.
High-resolution physical stratigraphy and detailed facies analysis have been carried out in the foredeep turbidites of Annot Sandstone in the Peïra Cava basin (French Maritime Alps) in order to characterize the relationship between facies and basin morphology. Detailed correlation patterns are evidence of a distinction between a southern bypass-dominated region, coincident with a channel-lobe transition and a north-eastern depositional zone, represented by sheet-like basin plain. These depositional elements are characterized by three main groups of beds related to the downcurrent evolution of bipartite flows. These facies groups are: 1) pebbly coarse-grained massive sandstones with rip-up mudstone clasts and impact mudstone breccias (Type I and II beds) deposited by basal dense flows, 2) coarse-grained massive sandstone overlain by tractive structures (Type III and IV beds) indicating the bypass of overlying turbulent flows and 3) massive medium-grained and fine-grained laminated sandstones related to the deposition of high and low density turbidity currents (Type V and VI beds). Ponding and reflection processes, affecting the upper turbulent flows, can characterize all type beds, but especially the beds of the third group. As described in other confined basins of the northern Apennines (Italy), the lateral and vertical distribution of these type of beds, together with other important sedimentary characteristics, - such as the sandstone/mudstone ratio, bed thicknesses, amalgamation surfaces and paleocurrents - reveal that the deposition of the Annot Sandstone in the Peïra Cava basin was controlled by an asymmetric basin with a steep western margin. This margin favored, on the one hand, basal dense flow decelerations and impacts, as well as bypass and deflection of the upper turbulent flows towards the north east. 相似文献
8.
Diagenesis is of decisive significance for the reservoir heterogeneity of most clastic reservoirs. Linking the distribution of diagenetic processes to the depositional facies and sequence stratigraphy has in recent years been discipline for predicting the distribution of diagenetic alterations and reservoir heterogeneity of clastic reservoirs. This study constructs a model of distribution of diagenetic alterations and reservoir heterogeneity within the depositional facies by linking diagenesis to lithofacies, sandstone architecture and porewater chemistry during burial. This would help to promote better understanding of the distribution of reservoir quality evolution and the intense heterogeneity of reservoirs. Based on an analogue of deltaic distributary channel belt sandstone in Upper Triassic Yanchang Formation, 83 sandstone plug samples were taken from 13 wells located along this channel belt. An integration of scanning electron microscopy, thin sections, electron microprobe analyses, rate-controlled porosimetry (RCP), gas-flow measurements of porosity and permeability, and nuclear magnetic resonance (NMR) experiments, together with published data, were analysed for the distribution, mineralogical and geochemical characteristics of detrital and diagenetic components and the distribution of reservoir quality within the distributary channel belt.Distribution of diagenetic alterations and reservoir heterogeneity within the distributary channel belt sandstones include (i) formation of high quality chlorite rims in the middle part of thick sandstones with coarser grain sizes and a lower content of ductile components resulted from the greater compaction resistance of these sandstones (providing larger pore spaces for chlorite growth), leading to formation of the intergranular pore – wide sheet-like throat and intergranular pore - intragranular pore – wide sheet-like throat (Φ>15%, k>1mD) in the middle part of thick sandstones; (ii) formation of thinner chlorite rims in the middle part of thinner sandstones is associated with the intergranular pore - intragranular pore – narrow sheet-like throat (9%<Φ<14%, 0.2mD<k<0.8mD); (iii) strong cementation by kaolinite in the more proximal sandstones of distributary channel owing to the strong feldspar dissolution by meteoric water, resulting in the intragranular pore - group of interstitial cement pores – narrow sheet-like throat/extremely narrow sheet-like throat (8%<Φ<11%, 0.1mD<k<0.3mD) due to the pore-filling kaolinite occluding porosity; (iv) formation of dense ferrocalcite zones (δ18OVPDB = −23.4‰ to −16.6‰; δ13 CVPDB = −4.0‰ to −2.3‰) favoured in the top and bottom of the channel sandstone which near the sandstone-mudstone bouding-surface, destroying pore space (Φ<8%, k<0.1mD); (v) strong compaction in sandstone of distributary channel edge laterally as a result of fine grain size and high content of ductile components in those sandstones, forming the group of interstitial cement pores – extremely narrow sheet-like throat with porosity values less than 8%. 相似文献
9.
Gang Li David J.W. Piper D. Calvin Campbell David Mosher 《Marine and Petroleum Geology》2012,29(1):90-103
Bonanza Canyon is a complex canyon system on the slope from the intermittently glaciated Grand Bank on the south side of Orphan Basin. A 3D seismic reflection volume, 2D high-resolution seismic reflection profiles and ten piston cores were acquired to study the evolution of this canyon system in relation to glacial processes on the continental shelf and the effects of different types of turbidity currents on the development of deep water channels. Mapped reflector surfaces from the 3D seismic volume show that the Bonanza Canyons developed in a depression created by a large submarine slide of middle Pleistocene age, coincident with the onset of glacigenic debris flows entering western Orphan Basin. Two 3–5 km wide, flat-floored channels were cut into the resulting mass-transport deposit and resemble catastrophic glacial meltwater channels elsewhere on the margin. Both channels subsequently aggraded. The eastern channel A became narrower but maintained a sandy channel floor. The western channel, B, heads at a spur on the continental slope and appears to have been rather passively draped by muds and minor sands that have built 1500-m wave length sediment waves.Muddy turbidites recorded by piston cores in the channel and on the inter-channel ridges are restricted to marine isotope stage (MIS) 2 and were deposited from thick, sheet-like, and sluggish turbidity current derived from western Orphan Basin that resulted in aggradation of the channels and inter-channel ridges. Sandy turbidites in channels and on inner levees were deposited throughout MIS 2–3 and were restricted to the channels, locally causing erosion. Some coincide with Heinrich events. Channels with well-developed distributaries on the upper slope more readily trap the sediments on Grand Bank to form sandy turbidity currents. Channel B dominated by muddy turbidity currents has wide and relatively smooth floor whereas channel A dominated by sandy turbidity currents has a sharp geometry. 相似文献
10.
We present field evidence from the Middle Eocene deep-marine Ainsa Basin, Spanish Pyrenees, to show channel-like features likely created by erosive subaqueous debris flows. Evidence from this basin suggests that the most erosive subaqueous debris-flows may create megascours removing up to ∼35 m thickness of sandy submarine-fan deposits from base-of-slope and lower-slope settings. This study suggests that individual debris flows may have been more erosive than turbidity currents, an observation that is opposed to many previous studies from the Ainsa Basin and other ancient deep-water clastic systems. In the Ainsa Basin, many of the debris flows deposited pebbly mudstones immediately above the basal erosion surfaces into which gouging flow-parallel grooves and pebble scours left isolated pebbles embedded in the immediately underlying sandstones. In one particularly well-exposed case, the sandstones immediately below the eroding debris flow were incorporated into it and preserved as sheared, disaggregated, brecciated, and partially liquefied sandstone beds within the pebbly mudstone. Our study suggests that erosion by large-volume debris flows in base-of-slope settings can be at least as important, if not more so, than turbidity currents in producing submarine megascours (probably chutes that, in cross section, superficially resemble submarine channels). This has important implications for understanding the erosivity of debris flows versus turbidity currents in modern and ancient environments, and it has significant implications for hydrocarbon reservoir continuity and heterogeneity, including the origin and recognition of mudstone-filled chutes or channels. 相似文献
11.
The Mio-Pliocene Misaki Formation, Miura Peninsula, Japan is characterized by alternation of mafic scoriaceous pebbly sandstone, pumiceous sandstone and siltstone, and mudstone formed in a fore-arc basin in an arc–arc collisional zone. The qualitative as well as quantitative evidences of tide during the Misaki sedimentation in the Jogashima area, Miura Peninsula are presented here. The lunar synodic period of ∼28 days/lunar month extracted from the Misaki tidal rhythmite agrees well with the published Miocene tidal rhythmite data. The couplet series of the Misaki tidal rhythmite, however, is often interrupted by downslope resedimentation via turbidity currents, intense penecontemporaneous deformation and bioturbation. Association of deep sea turbidites, mass flow deposits and tidal rhythmite suggest Misaki sedimentation in the Miura Peninsula took place in a submarine canyon setting. 相似文献
12.
David J. W. Piper N. Kontopoulos C. Anagnostou G. Chronis A. G. Panagos 《Geo-Marine Letters》1990,10(1):5-12
Rivers in the western Gulf of Corinth have built gravelly fan deltas into waters 100–300 m deep. Seismic profiles (3.5 kHz)
and gravity cores show that sand-filled channels extend seaward of modern distributary mouths and lead to sandy depositional
lobes in deeper water. Much of the fan delta slope is underlain by mud. Closely spaced gullies cut the interchannel ridges
on either side of the main channels. Incised slope valleys occur on east-facing slopes, where the wave fetch is greatest,
and may be formed by rip-current-induced turbidity currents. 相似文献
13.
You-Bin He Jin-Xiong Luo Xiang-Dong Li Zhen-Zhong Gao Zhan Wen 《Geo-Marine Letters》2011,31(5-6):509-523
The Xujiajuan Formation of the Lower Xiangshan Group in Ningxia, China, is composed of grayish-green to yellowish-green, fine- to medium-grained sandstone, calcareous sandstone, siltstone, and shale. The upper part is thin-bedded limestone. At the top of the second and third members of the formation, a number of beds intercalated between turbidites and deep-water shale show well-developed cross-bedding. These beds are composed mainly of thin- to medium-bedded calcareous siltstone, fine-grained sandstone, fine-grained calcisiltitic limestone, and silty shale. All bedding types reflect traction-current action. The laminae of the bidirectional and unidirectional cross-bedded units tend to dip either opposite to or at a large angle to the regional slope. The units vary in shape and orientation in both upslope and downslope directions. A comprehensive evaluation of the sedimentary structures and inferred paleocurrents suggests that the cross-bedded intervals were not formed by contour currents or turbidity currents, but most probably represent internal-wave and internal-tide deposits. 相似文献
14.
Host sediments may exert a significant influence on the formation of gas hydrate reservoirs. However, this issue has been largely neglected in the literature. In this study, we investigated the types, characteristics and the depositional model of the fine-grained gas hydrate-bearing sediments in the northeastern margin of the South China Sea by integrating core visual observations and logging-while-drilling downhole logs. The gas hydrate-bearing sediments consist dominantly of muddy sediments formed in the inter-canyon ridges of the upper continental slope, including hemipelagites, debrites (mud with breccia) and fine-grained turbidites. Cold-seep carbonates and associated slumping talus, muddy breccia debrites, as well as coarse-grained turbidites, may locally occur. Four classes and six sub-classes of log facies were defined by cluster analysis. Core-log correlation indicates that gas hydrates are majorly distributed in fine-grained sediments with high resistivity and low acoustic transit time (AC) log responses, which are easily differentiated from the fine-grained background sediments of high gamma-ray (GR), high AC, and low resistivity log values, and the seep carbonates characterized by low GR, high resistivity, high density, low AC and low porosity log values. The primary host sediments consist of fine-grained hemipelagic sediments formed by deposition from the nepheloid layers of river material and from the microfossils in seawater column. Most of the hemipelagic sediments, however, might have been extensively modified by slumping and associated gravity flow processes and were re-deposited in the forms of debrites and turbidites. Locally developed seep carbonates associated with gas hydrate dissociation and leakage provided additional sources for the gravity flow sediments. 相似文献
15.
Compared to conventional reservoirs, pore structure and diagenetic alterations of unconventional tight sand oil reservoirs are highly heterogeneous. The Upper Triassic Yanchang Formation is a major tight-oil-bearing formation in the Ordos Basin, providing an opportunity to study the factors that control reservoir heterogeneity and the heterogeneity of oil accumulation in tight oil sandstones.The Chang 8 tight oil sandstone in the study area is comprised of fine-to medium-grained, moderately to well-sorted lithic arkose and feldspathic litharenite. The reservoir quality is extremely heterogeneous due to large heterogeneities in the depositional facies, pore structures and diagenetic alterations. Small throat size is believed to be responsible for the ultra-low permeability in tight oil reservoirs. Most reservoirs with good reservoir quality, larger pore-throat size, lower pore-throat radius ratio and well pore connectivity were deposited in high-energy environments, such as distributary channels and mouth bars. For a given depositional facies, reservoir quality varies with the bedding structures. Massive- or parallel-bedded sandstones are more favorable for the development of porosity and permeability sweet zones for oil charging and accumulation than cross-bedded sandstones.Authigenic chlorite rim cementation and dissolution of unstable detrital grains are two major diagenetic processes that preserve porosity and permeability sweet zones in oil-bearing intervals. Nevertheless, chlorite rims cannot effectively preserve porosity-permeability when the chlorite content is greater than a threshold value of 7%, and compaction played a minor role in porosity destruction in the situation. Intensive cementation of pore-lining chlorites significantly reduces reservoir permeability by obstructing the pore-throats and reducing their connectivity. Stratigraphically, sandstones within 1 m from adjacent sandstone-mudstone contacts are usually tightly cemented (carbonate cement > 10%) with low porosity and permeability (lower than 10% and 0.1 mD, respectively). The carbonate cement most likely originates from external sources, probably derived from the surrounding mudstone. Most late carbonate cements filled the previously dissolved intra-feldspar pores and the residual intergranular pores, and finally formed the tight reservoirs.The petrophysical properties significantly control the fluid flow capability and the oil charging/accumulation capability of the Chang 8 tight sandstones. Oil layers usually have oil saturation greater than 40%. A pore-throat radius of less than 0.4 μm is not effective for producible oil to flow, and the cut off of porosity and permeability for the net pay are 7% and 0.1 mD, respectively. 相似文献
16.
Facies types and depositional models for thick gravity-flow deposits are inferred from Cretaceous Pyrenean examples occurring in different sedimentary settings: basin-plain during relative low sea level stand; slope-apron or deep valleys during relative sea level rise; and slope during relative sea level rise. The depositional units are interpreted as debrites, debrite-turbidite couplets, and megaturbidites. They are a function of transport distance and hydraulic jump by liquefaction and phase separation in large subaqueous flows. 相似文献
17.
Peter Haughton Christopher Davis William McCaffrey Simon Barker 《Marine and Petroleum Geology》2009,26(10):1900-1918
The deposits of subaqueous sediment gravity flows can show evidence for abrupt and/or progressive changes in flow behaviour making them hard to ascribe to a single flow type (e.g. turbidity currents, debris flows). Those showing evidence for transformation from poorly cohesive and essentially turbulent flows to increasingly cohesive deposition with suppressed turbulence ‘at a point’ are particularly common. They are here grouped as hybrid sediment gravity flow deposits and are recognised as key components in the lateral and distal reaches of many deep-water fan and basin plain sheet systems. Hybrid event beds contain up to five internal divisions: argillaceous and commonly mud clast-bearing sandstones (linked debrite, H3) overlie either banded sandstones (transitional flow deposits, H2) and/or structureless sandstones (high-density turbidity currents, H1), recording longitudinal and/or lateral heterogeneity in flow structure and the development of turbulent, transitional and laminar flow behaviour in different parts of the same flow. Many hybrid event beds are capped by a relatively thin, well-structured and graded sand–mud couplet (trailing low-density turbulent cloud H4 and mud suspension fallout H5). Progressive bed aggradation results in the deposits of the different flow components stacked vertically in the final bed. Variable vertical bed character is related to the style of up-dip flow transformations, the distance over which the flows can evolve and partition into rheological distinct sections, the extent to which different flow components mutually interact, and the rate at which the flows decelerate, reflecting position (lateral versus distal) and gradient changes. Hybrid beds may inherit their structure from the original failure, with turbidity currents outpacing debris flows from which they formed via partial flow transformation. Alternatively, they may form where sand-bearing turbidity currents erode sufficient substrate to force transformation of a section of the current to form a linked debris flow. The incorporation of mud clasts, their segregation in near-bed layers and their disintegration to produce clays that can dampen turbulence are inferred to be key steps in the generation of many hybrid flow deposits. The occurrence of such beds may therefore identify the presence of non-equilibrium slopes up-dip that were steep enough to promote significant flow incision. Where hybrid event beds dominate the entire distal fan stratigraphy, this implies either the system was continually out of grade in order to freight the flows with mud clasts and clays, or the failure mechanism and transport path repeatedly allowed transmission of components of the initial slumps distally. Where hybrid beds are restricted to sections representing fan initiation, or occur more sporadically within the fan deposits, this could indicate shorter episodes of disequilibrium, due to an initial phase of slope re-adjustment, or intermittent tectonically or gravity-driven surface deformation or supply variations. Alternatively, changes between conventional and hybrid event beds may record changes in the flow generation mechanism through time. Thus the vertical distribution of hybrid event beds may be diagnostic of the wider evolution of the fan systems that host them. 相似文献
18.
Distribution and origin of hybrid beds in sand-rich submarine fans of the Tanqua depocentre, Karoo Basin, South Africa 总被引：2，自引：1，他引：1
This study documents the stratigraphic and palaeogeographic distribution of hybrid event beds that comprise both debris-flow (cohesive) and turbidity current (non-cohesive) deposits. This is the first study of such beds in a submarine fan system to combine outcrop and research borehole control, and uses a dataset from the Skoorsteenberg Formation of the Tanqua depocentre in the Karoo Basin, South Africa. Three types of 0.1–1.0 m thick hybrid beds are observed, which have a basal weakly graded fine-grained sandstone turbidite division overlain by a division of variable composition that can comprise 1) poorly sorted carbonaceous-rich material supported by a mud-rich and micaceous sand-matrix; 2) poorly sorted mudstone clasts in a mud-rich sand-silt matrix; or 3) gravel-grade, rounded mudstone clasts in a well sorted (mud-poor) sandstone matrix. These upper divisions are interpreted respectively as: 1) the deposit of a debris-flow most likely derived from shelf-edge collapse; 2) the deposit of a debris flow, most likely developed through flow transformation from turbidity current that eroded a muddy substrate; and 3) from a turbidity current with mudstone clasts transported towards the rear of the flow. All three hybrid bed types are found concentrated at the fringes of lobes that were deposited during fan initiation and growth. The basinward stepping of successive lobes means that the hybrid beds are concentrated at the base of stratigraphic successions in medial and distal fan settings. Hybrid beds are absent in proximal fan positions, and rare and thin in landward-stepping lobes deposited during fan retreat. This distribution is interpreted to reflect the enhanced amounts of erosion and availability of mud along the transport route during early lowstands of sea level. Therefore, hybrid beds can be used to indicate a fan fringe setting, infer lobe stacking patterns, and have a sequence stratigraphic significance. 相似文献
19.
20.
Hans Nelson 《Marine Geology》1976,22(2):129-155
The asymmetrical Astoria Fan (110 × 180 km) developed off the Columbia River and Astoria submarine canyon during the Pleistocene. Morphology, stratigraphy, and lithology have been outlined for a Pleistocene turbidite, and a Holocene hemipelagic sedimentary regime to generate geologically significant criteria for comparison with ancient equivalent deposits. Both gray silty clay of the Late Pleistocene and olive-gray clay of the Early Holocene are interrupted by turbidites. The few deeply incised fan valleys of the more steeply sloping upper fan contain thick, muddy and very poorly sorted sand and gravel beds that usually have poorly developed internal sedimentary structures. The numerous shallower fan valleys and distributaries of the flatter middle and lower fan contain thick, clean, and moderately sorted medium to fine sands that are vertically graded in texture, composition and well-developed internal sedimentary structures. Tuffaceous turbidites (containing Mazama ash, 6600 B.P.) can be traced as thick deposits (ca. 30–40 cm) throughout the Astoria Channel system and as thin correlative interbeds (ca. 1–2 cm) in interchannel areas. Similarly, sand/shale ratios are high throughout the fan valleys and the middle and lower fan areas of distributaries, but are low in the upper-fan interchannel areas.These depositional trends indicate that high-density turbidity currents carry coarse traction loads that remain confined in upper but not lower fan valleys. Fine debris selectively sorts out from channelized flows into overbank suspension flows that spread over the fan and deposit clayey silt. A high content of mica, plant fragments, and glass shards (if present) characterizes deposits of the overbank flows, a major process in the building of upper fan levees and interchannel areas.In the Late Pleistocene, turbidity currents funneled most coarse-grained debris through upper channels to depositional sites in middle and lower fan distributaries that periodically shifted, anastomosed and braided to spread sand layers throughout the area. At this time, depositional rates were many times greater (>50 cm/1000 years) than in the Holocene (8 cm/1000 years).During the Holocene rise of sea level, the shoreline shifted, the Columbia River sediment was trapped, and turbidity-current activity slackened from one major event per 6 years in the Late Pleistocene, to one per 1000 years in the Early Holocene, to none since the Mt. Mazama eruption (ca. 6600 B.P.). Turbidites became muddier and deposited as thick beds within main channels, in part explaining Holocene deposition rates three times greater there (25 cm/1000 years) than in interchannel regions. Turbid-layer debris, funneled through channel systems and trapped from flows off the continental terrace, also contributed to rapid sedimentation in valleys; however, less than 2% of the suspended sediment load of the Columbia River has been trapped in fan valleys during the Holocene.By the Late Holocene, continuous particle-by-particle deposition of hemipelagic clay with a biogenous coarse fraction was the predominant process on the fan. These hemipelagites contain progressively more clay size and less terrigenous debris offshore, and are finer grained, richer in planktonic tests and dominated by radiolarians compared to the foraminiferal-rich Pleistocene clays. The hemipelagic sedimentation of interglacial times, however, is insignificant compared to turbidite deposition of glacial times. 相似文献