首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 250 毫秒
1.
This study documents the stratigraphic and palaeogeographic distribution of hybrid event beds that comprise both debris-flow (cohesive) and turbidity current (non-cohesive) deposits. This is the first study of such beds in a submarine fan system to combine outcrop and research borehole control, and uses a dataset from the Skoorsteenberg Formation of the Tanqua depocentre in the Karoo Basin, South Africa. Three types of 0.1–1.0 m thick hybrid beds are observed, which have a basal weakly graded fine-grained sandstone turbidite division overlain by a division of variable composition that can comprise 1) poorly sorted carbonaceous-rich material supported by a mud-rich and micaceous sand-matrix; 2) poorly sorted mudstone clasts in a mud-rich sand-silt matrix; or 3) gravel-grade, rounded mudstone clasts in a well sorted (mud-poor) sandstone matrix. These upper divisions are interpreted respectively as: 1) the deposit of a debris-flow most likely derived from shelf-edge collapse; 2) the deposit of a debris flow, most likely developed through flow transformation from turbidity current that eroded a muddy substrate; and 3) from a turbidity current with mudstone clasts transported towards the rear of the flow. All three hybrid bed types are found concentrated at the fringes of lobes that were deposited during fan initiation and growth. The basinward stepping of successive lobes means that the hybrid beds are concentrated at the base of stratigraphic successions in medial and distal fan settings. Hybrid beds are absent in proximal fan positions, and rare and thin in landward-stepping lobes deposited during fan retreat. This distribution is interpreted to reflect the enhanced amounts of erosion and availability of mud along the transport route during early lowstands of sea level. Therefore, hybrid beds can be used to indicate a fan fringe setting, infer lobe stacking patterns, and have a sequence stratigraphic significance.  相似文献   

2.
The deep lacustrine gravity-flow deposits are widely developed in the lower Triassic Yanchang Formation, southeast Ordos Basin, central China. Three lithofacies include massive fine-grained sandstone, banded sandstone, and massive oil shale and mudstone. The massive fine-grained sandstones have sharp upper contacts, mud clasts, boxed-shaped Gamma Ray (GR) log, but no grading and Bouma sequences. In contrast, the banded sandstones display different bedding characteristics, gradational upper contacts, and fine-upward. The massive, fine-grained sandstones recognized in this study are sandy debrites deposited by sandy debris flows, while the banded sandstones are turbidites deposited by turbidity currents not bottom currents. The sediment source for these deep gravity-flow sediments is a sand-rich delta system prograding at the basin margin. Fabric of the debrites in the sandy debris fields indicates initial formation from slope failure caused by the tectonic movement. As the sandy debris flows became diluted by water and clay, they became turbidity currents. The deep lacustrine depositional model is different from the traditional marine fan or turbidite fan models. There are no channels or wide lobate sand bodies. In the lower Triassic Yanchang Formation, layers within the sandy debrites have higher porosity (8–14%) and permeability (0.1–4 mD) than the turbidites with lower porosity (3–8%) and permeability (0.04–1 mD). Consequently, only the sandy debrites constitute potential petroleum reservoir intervals. Results of this study may serve as a model for hydrocarbon exploration and production for deep-lacustrine reservoirs from gravity-flow systems in similar lacustrine depositional environments.  相似文献   

3.
The West Crocker Formation (Oligocene–Early Miocene), NW Borneo, consists of a large (>20 000 km2) submarine fan deposited as part of an accretionary complex. A range of gravity-flow deposits are observed, the most significant of which are mud-poor, massive sandstones interpreted as turbidites and clast-rich, muddy sandstones and sandy mudstones interpreted as debrites. An upward transition from turbidite to debrite is commonly observed, with the contact being either gradational and planar, or sharp and highly erosive. Based on their repeated vertical relationship and the nature of the contact between them, these intervals are interpreted as being deposited from one flow event which consisted of two distinct flow phases: fully turbulent turbidity current and weakly turbulent to laminar debris flow. The associated bed is called a co-genetic turbidite–debrite, with the upper debrite interval termed a linked debrite. Linked debrites are best developed in the non-channellised parts of the fan system, and are absent to poorly-developed in the proximal channel-levee and distal basin floor environments. Due to outcrop limitations, the genesis of linked debrites within the West Crocker Formation is unclear. Based on clast size and type, it seems likely that a weakly turbulent to laminar debris-flow flow phase was present when the flow event entered the basin. A change in flow behaviour may have led to deposition of a sand-rich unit with ‘turbidite’ characteristics, which was subsequently overlain by a mud-rich unit with ‘debrite’ characteristics. Flow transformation may have been enhanced by the disintegration and incorporation into the flow of muddy clasts derived from the upstream channel floor, channel mouth or from channel-levee collapse. Lack of preservation of this debrite in proximal areas may indicate either bypass of this flow phase or that the available outcrops fail to capture the debris flow entry point. Establishing robust sedimentological criteria from a variety of datasets may lead to the increasing recognition of co-genetic turbidite-debrite beds, and an increased appreciation of the importance of bipartite flows in the transport and deposition of sediments in deepwater environments.  相似文献   

4.
We present field evidence from the Middle Eocene deep-marine Ainsa Basin, Spanish Pyrenees, to show channel-like features likely created by erosive subaqueous debris flows. Evidence from this basin suggests that the most erosive subaqueous debris-flows may create megascours removing up to ∼35 m thickness of sandy submarine-fan deposits from base-of-slope and lower-slope settings. This study suggests that individual debris flows may have been more erosive than turbidity currents, an observation that is opposed to many previous studies from the Ainsa Basin and other ancient deep-water clastic systems. In the Ainsa Basin, many of the debris flows deposited pebbly mudstones immediately above the basal erosion surfaces into which gouging flow-parallel grooves and pebble scours left isolated pebbles embedded in the immediately underlying sandstones. In one particularly well-exposed case, the sandstones immediately below the eroding debris flow were incorporated into it and preserved as sheared, disaggregated, brecciated, and partially liquefied sandstone beds within the pebbly mudstone. Our study suggests that erosion by large-volume debris flows in base-of-slope settings can be at least as important, if not more so, than turbidity currents in producing submarine megascours (probably chutes that, in cross section, superficially resemble submarine channels). This has important implications for understanding the erosivity of debris flows versus turbidity currents in modern and ancient environments, and it has significant implications for hydrocarbon reservoir continuity and heterogeneity, including the origin and recognition of mudstone-filled chutes or channels.  相似文献   

5.
High-resolution physical stratigraphy and detailed facies analysis have been carried out in the foredeep turbidites of Annot Sandstone in the Peïra Cava basin (French Maritime Alps) in order to characterize the relationship between facies and basin morphology. Detailed correlation patterns are evidence of a distinction between a southern bypass-dominated region, coincident with a channel-lobe transition and a north-eastern depositional zone, represented by sheet-like basin plain. These depositional elements are characterized by three main groups of beds related to the downcurrent evolution of bipartite flows. These facies groups are: 1) pebbly coarse-grained massive sandstones with rip-up mudstone clasts and impact mudstone breccias (Type I and II beds) deposited by basal dense flows, 2) coarse-grained massive sandstone overlain by tractive structures (Type III and IV beds) indicating the bypass of overlying turbulent flows and 3) massive medium-grained and fine-grained laminated sandstones related to the deposition of high and low density turbidity currents (Type V and VI beds). Ponding and reflection processes, affecting the upper turbulent flows, can characterize all type beds, but especially the beds of the third group. As described in other confined basins of the northern Apennines (Italy), the lateral and vertical distribution of these type of beds, together with other important sedimentary characteristics, - such as the sandstone/mudstone ratio, bed thicknesses, amalgamation surfaces and paleocurrents - reveal that the deposition of the Annot Sandstone in the Peïra Cava basin was controlled by an asymmetric basin with a steep western margin. This margin favored, on the one hand, basal dense flow decelerations and impacts, as well as bypass and deflection of the upper turbulent flows towards the north east.  相似文献   

6.
Seven categories of event bed (1–7) are recognised in cores from hydrocarbon fields in the outer part of the Palaeocene Forties Fan, a large mixed sand-mud, deep-water fan system in the UK and Norwegian Central North Sea. Bed Types 1, 6 and 7 resemble conventional high-density turbidite, debrite and low-density turbidite, respectively. However the cores are dominated by distinctive hybrid event beds (Types 2–5; 81% by thickness) that comprise an erosively-based graded and structureless and/or banded sandstone overlain by an argillaceous sandstone or sandy-mudstone unit containing mudstone-clasts and common carbonaceous fragments. Many of the hybrid beds are capped by a thin laminated sandstone–mudstone couplet (the deposit of a dilute wake behind the head of the turbidity current). Different types of hybrid event bed Types are defined on the basis of the ratio of sandier lower part to upper argillaceous part of the bed, and the internal structure, particularly the presence of banding. Although the argillaceous and clast-rich upper divisions could reflect post-depositional mixing, sand injection or substrate deformation, they can be shown to be dominantly primary depositional features and record both a temporal (and by implication) spatial change from turbidite to debrite deposition beneath rheologically complex hybrid flows. Where banding occurs between lower sandy and upper argillaceous divisions, the flow may have passed through a transitional flow regime. Significantly, the often soft-sediment sheared and partly sand-injected argillaceous divisions are present in cores both close to and remote from salt diapirs and hence are not a local product of remobilisation around salt-cored topography. Lateral correlations between wells establish that sandy hybrid beds (Types 2, 3S) pass down-dip and laterally into packages dominated by muddier hybrid beds (Types 3M, 4) over relatively short distances (several km). Type 5 beds have minimal or no lower sandier divisions, implying that the debritic component outran the sandier component of the flow. The Forties hybrid beds are thought to record flow transformations affecting fluidal flows following erosion and bulking with mudstone clasts and clays that suppressed near-bed turbulence and induced a change to plastic flow. Hybrid beds dominate the muddier parts of sandying-upward, muddying-upward and sandying to muddying-upward successions, interpreted to record splay growth and abandonment, overall fan progradation, and local non-uniformity effects that either delayed or promoted the onset of flow transformations. The dominance of hybrid event beds in the outer Forties Fan may reflect very rapid delivery of sand to the basin, an uneven substrate that promoted flow non-uniformity, tilting as a consequence of source area uplift and extensive inner-fan erosion to create deep fan valleys. This combination of factors could have promoted erosion and bulking, and hence transformations leading to the predominance of hybrid beds in the outer parts of the fan.  相似文献   

7.
Thin-bedded debris flow deposits are an important constituent of the marine Quaternary, sequence in NW Baffin Bay, covering about 30,000 km2 of sea floor. Individual debris flows traveled over a slope as low as 0.4° and a distance of several hundred kilometers. Some debris flows have generated turbidity currents. Debris flow deposits observed in the cores displayed distinctive downslope trends in grain size, bed thickness, and sorting, and showed variations in structures and sequences of sedimentary structures with poorly to moderately well-developed gravel fabric, showing the long axes of clasts aligned nearly parallel to the bedding plane.  相似文献   

8.
M. Drago   《Ocean Engineering》2002,29(14):1769-1780
In the last decade, offshore pipeline engineering extended its action field to very deep waters and continental slopes. This implied the necessity to deal with continental slope instability and mass gravity flows. Mass gravity flows are rare and have random occurrence; therefore, considering also the technical difficulties, the direct measurement of the phenomena is practically impossible. This has encouraged the development of physical and numerical models for investigating the characteristics and intensity of the phenomena (Proc. OTC Conf., Houston, TX (2000); Proc. 19th OMAE Conference, New Orleans, LA (2000)). In order to provide design activities with reliable predictive tools, two numerical models, one for debris flows and the other for turbidity currents, have been developed. The two models are coupled by the bottom boundary conditions of the turbidity current model that depends on the instantaneous velocity of the debris flow model. The two models used together provide a tool for the evaluation of a mass gravity flow event starting as a debris flow and evolving into a turbidity current.  相似文献   

9.
Hans Nelson 《Marine Geology》1976,22(2):129-155
The asymmetrical Astoria Fan (110 × 180 km) developed off the Columbia River and Astoria submarine canyon during the Pleistocene. Morphology, stratigraphy, and lithology have been outlined for a Pleistocene turbidite, and a Holocene hemipelagic sedimentary regime to generate geologically significant criteria for comparison with ancient equivalent deposits. Both gray silty clay of the Late Pleistocene and olive-gray clay of the Early Holocene are interrupted by turbidites. The few deeply incised fan valleys of the more steeply sloping upper fan contain thick, muddy and very poorly sorted sand and gravel beds that usually have poorly developed internal sedimentary structures. The numerous shallower fan valleys and distributaries of the flatter middle and lower fan contain thick, clean, and moderately sorted medium to fine sands that are vertically graded in texture, composition and well-developed internal sedimentary structures. Tuffaceous turbidites (containing Mazama ash, 6600 B.P.) can be traced as thick deposits (ca. 30–40 cm) throughout the Astoria Channel system and as thin correlative interbeds (ca. 1–2 cm) in interchannel areas. Similarly, sand/shale ratios are high throughout the fan valleys and the middle and lower fan areas of distributaries, but are low in the upper-fan interchannel areas.These depositional trends indicate that high-density turbidity currents carry coarse traction loads that remain confined in upper but not lower fan valleys. Fine debris selectively sorts out from channelized flows into overbank suspension flows that spread over the fan and deposit clayey silt. A high content of mica, plant fragments, and glass shards (if present) characterizes deposits of the overbank flows, a major process in the building of upper fan levees and interchannel areas.In the Late Pleistocene, turbidity currents funneled most coarse-grained debris through upper channels to depositional sites in middle and lower fan distributaries that periodically shifted, anastomosed and braided to spread sand layers throughout the area. At this time, depositional rates were many times greater (>50 cm/1000 years) than in the Holocene (8 cm/1000 years).During the Holocene rise of sea level, the shoreline shifted, the Columbia River sediment was trapped, and turbidity-current activity slackened from one major event per 6 years in the Late Pleistocene, to one per 1000 years in the Early Holocene, to none since the Mt. Mazama eruption (ca. 6600 B.P.). Turbidites became muddier and deposited as thick beds within main channels, in part explaining Holocene deposition rates three times greater there (25 cm/1000 years) than in interchannel regions. Turbid-layer debris, funneled through channel systems and trapped from flows off the continental terrace, also contributed to rapid sedimentation in valleys; however, less than 2% of the suspended sediment load of the Columbia River has been trapped in fan valleys during the Holocene.By the Late Holocene, continuous particle-by-particle deposition of hemipelagic clay with a biogenous coarse fraction was the predominant process on the fan. These hemipelagites contain progressively more clay size and less terrigenous debris offshore, and are finer grained, richer in planktonic tests and dominated by radiolarians compared to the foraminiferal-rich Pleistocene clays. The hemipelagic sedimentation of interglacial times, however, is insignificant compared to turbidite deposition of glacial times.  相似文献   

10.
Various transformation mechanisms can generate turbidity currents from subaqueous debris flows. Different transformation mechanisms have been described and interpreted in the past from laboratory experiments and from deposits, but the two approaches have not generally been linked. This has made the genetic interpretation and comparison of deposits difficult. In this paper a generic classification scheme of debrite–turbidite couplets is proposed based on transformation mechanisms inferred from laboratory experiments. Five different flow types (called A–E herein) and their resulting deposits are detailed, but they are all part of a continuous spectrum, and a mixture of types is likely to be found in the field. Type A flows are strong, dense debris flows that undergo little transformation. Their deposit will be a debrite overlain by a thin turbidite, which is separated from it by a clear grain size break. Type B flows are weaker and can develop waves at the debris flow-turbidity current interface. The deposit will be a debrite with a wavy top overlain by a turbidite that is thicker than for type A flows. For type C flows, the interfacial waves will grow so much that the debris flow disintegrates into separate parts. The deposit will consist of debrite lenses encased in a turbidite. Type D flows will undergo even more mixing than type C flows so that the debrite parts will be mixed. Their deposit will be a turbidite with laterally varying areas of debrite characteristics near the bed. Type E flows will be so transformed that the debris flow character has disappeared and the flow is a turbidity current with high sediment concentration. The deposit will be largely turbiditic. The flow types and deposits will be illustrated with some examples from two field areas: the Polish Carpathians and the French Maritime Alps.  相似文献   

11.
This study documents the stratigraphic evolution of the Castagnola ponded turbidite mini-basin through analysis of a detailed base-to-top section measured in the central part of the basin. Vertical variations in facies characteristics, thickness ratio of mud cap vs. sandstone of event beds and net/gross are argued to be good proxies for pinpointing the stratigraphic transition from dominantly ponded deposition, where most of the flow is trapped by the confining topography, to a flow-stripping – dominated phase in which an increasingly large part of incoming flows can escape the basin by spilling over the enclosing topography. Thickness statistics of sandstones and mud caps of event beds from the case study show that in the initial stage of turbidite deposition only part of the mud of exceptionally large volume flows escaped the confining topography; as the basin was progressively infilled, nearly all inbound flows were affected by flow stripping, with part of the sand and most of the mud escaping the basin. In the latest recorded stage of deposition the abundance of by-pass features coupled with significant modification of the sandstone bed thickness population suggests that the turbidite system was no longer obstructed frontally, and could step forward onto a healed topography. In order to assess whether the documented trends of turbidite bed characteristics indicative of the ‘fill to spill’ transition could be recognised from wireline log data alone, synthetic logs were prepared by up-scaling the field data to resolutions typical of borehole geophysical log data. Vertical trends of average bed thickness and net/gross recognisable in the synthetic data suggest that the transition from ponded to spill-dominated situations should be resolvable in geophysical log data.  相似文献   

12.
Results from a small set of laboratory experiments are presented here that help further constrain the processes governing the production of turbidity currents from impulsive failures of continental shelf and slope deposits. Three mechanisms by which sediment can be transferred from a parent debris flow to a less-dense turbidity current were observed and quantified. These mechanisms are grain-by-grain erosion of sediment from the leading edge of the parent flow, detachment of thin layers of shearing material from the head of the parent flow, and turbulent mixing at the head of the parent flow. Which transfer process dominates an experimental run depends on whether the large dynamic stresses focused on the head of the debris flow are sufficient to overcome a effective yield strength for the parent sediment+water mixture and on whether the dynamic stresses are sufficient to induce the turbulent flow of the parent mixture. Analysis of data from Marr et al. [Geol. Soc. Am. Bull. 113 (2001) 1377] and Mohrig et al. [Geol. Soc. Am. Bull. 110 (1998) 387] support the use of a shear strength to dynamic stress ratio in constraining necessary critical values for occurrence of the different production mechanisms. Direct sampling of turbidity currents using racks of vertically stacked siphons was used to measure both the quantity of sediment eroded from the heads of non-mixing parent flows and the distribution of particle sizes transported by the developing turbidity currents. Acoustic backscatter imaging was used to better resolve the internal boundary separating any turbulent mixing zone near the front of a flow from unmodified parent material.  相似文献   

13.
Parallel laminated, graded, and homogeneous muds of turbidity current origin are the predominant facies in the non-fan slope-centered Ulleung marginal basin during the last glacial period. Dilute turbidity currents were probably generated from slumps, slides, and debris flows on the slope. A mid-slope core contains poorly sorted mud-clast muds of debris flow origin. During the period of 75,000 and 10,000 years BP, turbidity currents occurred approximately every 125 years, each depositing about 0.5 km3 of mud with an accumulation rate of up to 40 cm/103 years. The basin was largely suboxic with a rare incursion of bottom currents.  相似文献   

14.
Hybrid beds, the deposits of sediment gravity flows that show evidence for more than one flow regime (turbulent, transitional and/or laminar), have been recognized as important components of submarine lobe deposits. A wide range of hybrid bed types have been documented, however, quantitative analysis of the stratigraphic and geographic distribution of these enigmatic bed types is rare. Here, extensive exposures integrated with research borehole data from Unit A of the Laingsburg Formation and Fan 4 of the Skoorsteenberg Formation, Ecca Group, South Africa, provide the opportunity to examine geographical and stratigraphic patterns over a range of hierarchical scales.For this purpose, >23,000 individual beds have been evaluated for deposit type and bed thickness. On average, hybrid beds make up < 5% of all events and <10% of the cumulative thickness. Lobe complex 1 (LC1) of Fan 4,Skoorsteenberg Formation, preserves a prominent geographical trend of hybrid beds becoming more prevalent towards the frontal fringes of a lobe complex (up to 33.2% of beds), whereas their proportion in proximal and medial lobe complex settings is <10%.Data from Unit A, Laingsburg Formation, show hybrid beds are less common in the basal (A.1) and top (A.6) subunits compared to A.2-A.5 in both core data sets. The bases and tops of some lobe complexes (A.2, A.3 and A.5.7) are observed to be slightly enriched in hybrid beds, whereas others (A.5.1, A.5.5 and A.6.1) show no hybrid beds in their bases, which does not conform to expected allogenically-driven distributions that predict more hybrid beds during the initiation of lobe complexes. Instead, the occurrence and distribution of hybrid beds in lobe complexes are interpreted to be controlled by autogenic processes, including flow transformation processes on the basin-floor meaning enrichment in frontal lobe fringe settings. Therefore, the 1D distribution of hybrid beds in lobe complexes reflects the dominant stacking pattern of lobes within a lobe complex, with enrichment at the base and top of lobe complexes due to overall progradational to retrogradational stacking patterns. Individual lobes show a wide range of hybrid bed distributions, due to stacking patterns of the component lobe elements. These findings highlight the importance of autogenic processes rather than allogenic controls in the distribution of hybrid beds, which has implications for reservoir evaluation and the assessment of lobe stacking patterns in 1D core data sets.  相似文献   

15.
Small volume (<15 km3) debris flows which were triggered by the 1929 earthquake postdate the period of high velocity turbidity current flow resulting from that earthquake. They thus could not have contributed sediment to the 1929 cable-breaking turbidity currents. Both the proposed “Grand Banks Slump” and another large scale debris flow also attributed to the 1929 event, are shown to be autochthonous. In light of the limited volume and late-stage timing of mass wasting on the upper Laurentian Fan in 1929, an additional mechanism must have existed which supplied further sediment to the turbidity current in 1929.  相似文献   

16.
Quantifying the characteristics of the turbidity currents that are responsible for the erosion, lateral migration and filling of submarine channels maybe useful for predicting the distribution of lithofacies in channel fill and levee reservoirs. This paper uses data from a well-studied submarine channel in Amazon Fan in an attempt to reconstruct the velocity, thickness, concentration, duration, recurrence rates and vertical structure of turbidity currents in this long sinuous channel. Estimates of flow conditions are derived from the morphology of the channels and the characteristics of the deposits within them. In particular, the availability of information on the sediment distribution with respect to the channel topography at the time of deposition allows for insights into the vertical structure of the flow, a key property that has been so far poorly understood. Integration of flow constraints from well and seismic data or from detailed analysis of outcrop with numerical flow models is a critical step toward a complete understanding of the flow and associated deposits. Turbidity currents in sinuous submarine channels, exemplified by Amazon Channel, are found to last for tens of hours and occur on a regular, quasi-annual basis. Model results suggest that these flows had, on average, velocities ranging from 2 to 4 m/s in the canyon/upper fan which decreased to 0.5–1 m/s in the lower fan, travelling in excess of 800 km. The model turbidity currents were subcritical over most of the channel length, indicating a low degree of water entrainment and low rate of deceleration down the channel. The formation of such long, sinuous channels is intrinsically associated with frequent, long-duration, subcritical turbidity currents carrying a silt-dominated sediment load.  相似文献   

17.
The Upper Cretaceous Bordighera Sandstone of NW Italy is a coarse-grained, sand-rich elongated turbidite system (ca. 15 × 45 km in outcrop) up to 250 m thick, interpreted to have been deposited in a trench setting. The siliciclastic succession interfingers with muddy calcareous turbidites, which become more abundant toward the lateral and distal domains. Bed type associations allow the distinction of a proximal channelized domain which transitions to a more distal lobe domain, characterized by abundant mudclast-rich sandstones and by bipartite and tripartite beds with a mud-rich middle or upper division (hybrid event beds). The transition between the proximal and distal domains occurs over a relatively limited spatial extent (ca. 5 km). The presence of lenticular bed-sets made up of coarse grained and mud-poor sandstones throughout the distal domain suggests that distributary channels were present, indicating sediment bypass further down-dip toward the most distal and not preserved parts of the system. Hybrid event beds - commonly associated with distal and marginal fan environments such as fan fringes - are present throughout the lobe domain and extend for up to ca. 30 km in down-dip distance. They are more abundant in the proximal and axial depositional lobe domain and their appearance occurs within a short basin-ward distance from the inferred channel-lobe transition zone. Flow expansion at the termination of the channelized domain and the enhanced availability of cohesive substrate due to the presence of intra-basinal muddy calcareous beds are interpreted as the key controls on the widespread occurrence of mudclast-rich and argillaceous sandstone beds. The abrupt appearance and the persistent occurrence of such beds across an extensive domain have implications for characterizing bed-scale (sub-seismic) heterogeneity of deep-water clastic hydrocarbon reservoirs.  相似文献   

18.
The origin of acoustically transparent fan deposits overlying glacial till and ice-proximal sediments on the southern margin of the Norwegian Channel has been studied using high-resolution seismic-reflection profiles and multibeam bathymetry. The first deposits overlying glacigenic sediments are a series of stacked, acoustically transparent submarine fans. The lack of glaciomarine sediments below and between individual fans indicates that deposition was rapid and immediately followed the break up of the Late Weichselian ice cover. The fans are overlain by stratified glaciomarine sediments and Holocene mud. Because of the uniformity of this drape, the upper surface of the fan deposits is mimicked at the present seafloor, and the bathymetric images clearly show the spatial relationship of the fans to bedrock ridges and the presence of braided channel-levee systems on the surface of the youngest fans. The acoustically transparent character of the fan deposits indicates that they comprise silt and clay, and their lobate form and lack of internal stratification indicates that they were deposited by debris flows. The channel-levee morphology indicates deposition from more watery hyperconcentrated fluid flows. The fan sediments were either derived from 1) erosion of Mid Weichselian lake deposits in southern Skagerrak or 2) from Late glacial ice-margin lake deposits, ponded against the Norwegian Channel ice stream, which collapsed catastrophically when the lateral support was removed as the ice disintegrated. Fans composed almost exclusively of fine-grained sediment need not, therefore, rule out an origin in a deglacial setting relatively close to the former margins of glaciers and ice sheets.  相似文献   

19.
The Mississippi Fan is a Quarternary accumulation composed of more than seven elongated fan lobes. Isopach and structure maps show frequent shifting of these lobes. The Mississippi Canyon, formed by retrogressive slumping, connects to the youngest fan lobe. The upper fan-lobe is characterized by a large, incised, partially infilled, leveed channel. The middle fan-lobe is aggradational, convex in cross section, with a channel-levee complex on its apex. The lower fan-lobe contains a recently active small channel and several abandoned ones. Depositional patterns can be explained by several processes: “fluvial,” debris flows, and turbidity currents. Margin setting represents fan and/or source area  相似文献   

20.
The capacity of turbidity currents to carry sand and coarser sediment from shallow to deep regions in the submarine environment has attracted the attention of researchers from different disciplines. Yet not only are field measurements of oceanic turbidity currents a rare achievement, but also the data that have been collected consist mostly of velocity records with very limited or no suspended sediment concentration or grain size distribution data. This work focuses on two turbidity currents measured in Monterey Canyon in 2002 with emphasis on suspended sediment from unique samples collected within the body of these currents. It is shown that concentration and grain size of the suspended material, primarily controlled by the source of the gravity flows and their interaction with bed material, play a significant role in shaping the characteristics of the turbidity currents as they travel down the canyon. Before the flows reach their normal or quasi-steady state, which is defined by bed slope, bed roughness, and suspended grain size, they might pass through a preliminary adjustment stage where they are subject to capacity-driven deposition, and release heavy material in excess. Flows composed of fine (silt/clay) sediments tend to be thicker than those with sands. The measured velocity and concentration data confirm that flow patterns differ between the front and body of turbidity currents and that, even after reaching normal state, the flow regime can be radically disrupted by abrupt changes in canyon morphology.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号