首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
The deposits of subaqueous sediment gravity flows can show evidence for abrupt and/or progressive changes in flow behaviour making them hard to ascribe to a single flow type (e.g. turbidity currents, debris flows). Those showing evidence for transformation from poorly cohesive and essentially turbulent flows to increasingly cohesive deposition with suppressed turbulence ‘at a point’ are particularly common. They are here grouped as hybrid sediment gravity flow deposits and are recognised as key components in the lateral and distal reaches of many deep-water fan and basin plain sheet systems. Hybrid event beds contain up to five internal divisions: argillaceous and commonly mud clast-bearing sandstones (linked debrite, H3) overlie either banded sandstones (transitional flow deposits, H2) and/or structureless sandstones (high-density turbidity currents, H1), recording longitudinal and/or lateral heterogeneity in flow structure and the development of turbulent, transitional and laminar flow behaviour in different parts of the same flow. Many hybrid event beds are capped by a relatively thin, well-structured and graded sand–mud couplet (trailing low-density turbulent cloud H4 and mud suspension fallout H5). Progressive bed aggradation results in the deposits of the different flow components stacked vertically in the final bed. Variable vertical bed character is related to the style of up-dip flow transformations, the distance over which the flows can evolve and partition into rheological distinct sections, the extent to which different flow components mutually interact, and the rate at which the flows decelerate, reflecting position (lateral versus distal) and gradient changes. Hybrid beds may inherit their structure from the original failure, with turbidity currents outpacing debris flows from which they formed via partial flow transformation. Alternatively, they may form where sand-bearing turbidity currents erode sufficient substrate to force transformation of a section of the current to form a linked debris flow. The incorporation of mud clasts, their segregation in near-bed layers and their disintegration to produce clays that can dampen turbulence are inferred to be key steps in the generation of many hybrid flow deposits. The occurrence of such beds may therefore identify the presence of non-equilibrium slopes up-dip that were steep enough to promote significant flow incision. Where hybrid event beds dominate the entire distal fan stratigraphy, this implies either the system was continually out of grade in order to freight the flows with mud clasts and clays, or the failure mechanism and transport path repeatedly allowed transmission of components of the initial slumps distally. Where hybrid beds are restricted to sections representing fan initiation, or occur more sporadically within the fan deposits, this could indicate shorter episodes of disequilibrium, due to an initial phase of slope re-adjustment, or intermittent tectonically or gravity-driven surface deformation or supply variations. Alternatively, changes between conventional and hybrid event beds may record changes in the flow generation mechanism through time. Thus the vertical distribution of hybrid event beds may be diagnostic of the wider evolution of the fan systems that host them.  相似文献   

2.
A class of turbidity flows is investigated in which sediment is entrained sufficient to balance losses and an equilibrium flow is sustained. The analytical models for predicting equilibrium flow configurations are surveyed. These are found to differ by two orders of magnitude in the required flow speeds. Five field observations of self-sustaining turbidity flows are investigated as a test for the analytical models. The model of Bagnold (1962) is found to have skill in predicting all of the field observations. The significance of these flows to the reliability of pipelines, cables and other engineering structures on continental shelves is considered. Circumstantial evidence is presented that suggests that these flows may be a mechanism for offshore flows of sand from beaches during major storms.  相似文献   

3.
Small volume (<15 km3) debris flows which were triggered by the 1929 earthquake postdate the period of high velocity turbidity current flow resulting from that earthquake. They thus could not have contributed sediment to the 1929 cable-breaking turbidity currents. Both the proposed “Grand Banks Slump” and another large scale debris flow also attributed to the 1929 event, are shown to be autochthonous. In light of the limited volume and late-stage timing of mass wasting on the upper Laurentian Fan in 1929, an additional mechanism must have existed which supplied further sediment to the turbidity current in 1929.  相似文献   

4.
Yi Rui 《Marine Geodesy》2019,42(3):246-262
Submarine debris flows have a significant impact on offshore and coastal facilities. The unique characteristics of submarine debris flows involve large mass movements and long travel distances over very gentle slopes. To improve our insight and knowledge of the basic mechanism behind submarine debris flows, an analytical model was derived for the mobility of submarine debris flows. This model takes into account the mass change of debris flows induced by deposition, stagnation pressure, and the topography of the depositional area. One case study on the Palos Verdes debris flow proves its ability to predict the run-out distance of a submarine debris flow to a reasonable level of accuracy. On the gentle slopes, the submarine debris flow progressively loses mass due to deposition, which in turn influences the flow velocity. In addition, the results show that the slope angle and spreading angle of the debris depositional zone play important roles in the sliding process.  相似文献   

5.
Various transformation mechanisms can generate turbidity currents from subaqueous debris flows. Different transformation mechanisms have been described and interpreted in the past from laboratory experiments and from deposits, but the two approaches have not generally been linked. This has made the genetic interpretation and comparison of deposits difficult. In this paper a generic classification scheme of debrite–turbidite couplets is proposed based on transformation mechanisms inferred from laboratory experiments. Five different flow types (called A–E herein) and their resulting deposits are detailed, but they are all part of a continuous spectrum, and a mixture of types is likely to be found in the field. Type A flows are strong, dense debris flows that undergo little transformation. Their deposit will be a debrite overlain by a thin turbidite, which is separated from it by a clear grain size break. Type B flows are weaker and can develop waves at the debris flow-turbidity current interface. The deposit will be a debrite with a wavy top overlain by a turbidite that is thicker than for type A flows. For type C flows, the interfacial waves will grow so much that the debris flow disintegrates into separate parts. The deposit will consist of debrite lenses encased in a turbidite. Type D flows will undergo even more mixing than type C flows so that the debrite parts will be mixed. Their deposit will be a turbidite with laterally varying areas of debrite characteristics near the bed. Type E flows will be so transformed that the debris flow character has disappeared and the flow is a turbidity current with high sediment concentration. The deposit will be largely turbiditic. The flow types and deposits will be illustrated with some examples from two field areas: the Polish Carpathians and the French Maritime Alps.  相似文献   

6.
The Pacific deep western boundary current (DWBC) encounters an unstable continental margin where it flows across the New Zealand convergent plate boundary. Seismic profiles show the DWBC was intercepted by several submarine landslides, the latest (~38-100 ka) being the newly discovered Matakaoa debris flow. Occupying ~650 km3, the flow extends 200 km from Matakaoa re-entrant to Kermadec Ridge to form a 37-68 m high lobe in the current's path. This deposit appears to have (1) reduced the size of gaps in the western boundary, thereby reducing leakage of the DWBC, and (2) temporarily reduced the terrigenous supply into the flow by impeding the passage of turbidity currents from New Zealand.  相似文献   

7.
Results from a small set of laboratory experiments are presented here that help further constrain the processes governing the production of turbidity currents from impulsive failures of continental shelf and slope deposits. Three mechanisms by which sediment can be transferred from a parent debris flow to a less-dense turbidity current were observed and quantified. These mechanisms are grain-by-grain erosion of sediment from the leading edge of the parent flow, detachment of thin layers of shearing material from the head of the parent flow, and turbulent mixing at the head of the parent flow. Which transfer process dominates an experimental run depends on whether the large dynamic stresses focused on the head of the debris flow are sufficient to overcome a effective yield strength for the parent sediment+water mixture and on whether the dynamic stresses are sufficient to induce the turbulent flow of the parent mixture. Analysis of data from Marr et al. [Geol. Soc. Am. Bull. 113 (2001) 1377] and Mohrig et al. [Geol. Soc. Am. Bull. 110 (1998) 387] support the use of a shear strength to dynamic stress ratio in constraining necessary critical values for occurrence of the different production mechanisms. Direct sampling of turbidity currents using racks of vertically stacked siphons was used to measure both the quantity of sediment eroded from the heads of non-mixing parent flows and the distribution of particle sizes transported by the developing turbidity currents. Acoustic backscatter imaging was used to better resolve the internal boundary separating any turbulent mixing zone near the front of a flow from unmodified parent material.  相似文献   

8.
为了研究海底滑坡对海洋单桩的冲击力大小,首先通过调整高岭土、粉砂的不同含量,得到不同流变特性、不同密度的碎屑流,采用Herschel-Bulkley模型和幂率模型对流体流变性质进行描述;随后利用自制海底滑坡模型槽,模拟碎屑流在不同流速和黏度下对模型桩的冲击;并结合流体力学理论,建立阻力系数与非牛顿流体雷诺数之间关系表达式。试验数据表明:碎屑流黏度和流速是影响海底滑坡冲击力的主要因素,海底滑坡冲击力随着泥浆黏度和流速的增加而增大。同时,考虑碎屑流剪切稀释特性,得到管桩阻力系数随雷诺数变化的拟合公式,为海洋桩基础设计提供参考。  相似文献   

9.
Gravity flow deposits form a significant component of the stratigraphic record in ancient and modern deep-water basins worldwide. Analyses of high-resolution 3D seismic reflection data in a predominantly slope setting, the southern slope of Qiongdongnan Basin, South China Sea, reveal the extensive presence of gravity flow depositional elements in the Late Pliocene−Quaternary strata. Three key elements were observed: (1) mass transport deposits (MTDs) including slumps and debris flows, (2) turbidity current deposits including distributary channel complexes, leveed channel complexes and avulsion channel complexes, and (3) deep-water drapes (highstand condensed sections). Each depositional element displays a unique seismic expression and internal structures in seismic profiles and attribute maps. Based on seismic characteristics, the studied succession is subdivided into six units in which three depositional cycles are identified. Each cycle exhibits MTDs (slump or debris) at the base, overlain by turbidities or a deep-water drape. The genesis of these cycles is mainly controlled by frequent sea-level fluctuations and high sedimentation rates in the Late Pliocene–Quaternary. Moreover, tectonics, differential subsidence, and paleo-seafloor morphology may have also contributed to their formation processes. The present study is aimed to a better understanding of deep-water depositional systems, and to a successful hydrocarbon exploration and engineering-risk assessment.  相似文献   

10.
A series of submarine canyons on the southwest slope of Orphan Basin experienced complex failure at 7–8 cal ka that resulted in the formation of a large variety of mass-transport deposits (MTDs) and sediment gravity flows. Ultra-high-resolution seismic-reflection profiles and multiple sediment cores indicate that evacuation zones and sediment slides characterize the canyon walls, whereas the canyon floors and inner-banks are occupied by cohesive debris-flow deposits, which at the mouths of the canyons on the continental rise form large, coalescing lobes (up to 20 m thick and 50 km long). Erosional channels, extending throughout the length of the study area (<250 km), are observed on the top of the lobes. Piston cores show that the channels are partially filled by poorly sorted muddy sand and gravel, capped by inversely to normally graded gravel and sand. Such deposits are interpreted to originate from multi-phase gravity flows, consisting of a lower part behaving as a cohesionless debris flow and an upper part that was fully turbulent.The Holocene age and the widespread synchronous occurrence of these failures indicate a large magnitude earthquake as their possible triggering mechanism. The large debris-flow deposits on the continental rise originated from large failures on the upper continental slope, involving proglacial sediments. Retrogression of these failures led to the eventual failure of marginal sandy till deposits on the upper slope and outer shelf, which due to their low cohesion disintegrated into multi-phase gravity flows. The evacuation zones and slide deposits on the canyon walls were triggered either by the earthquake, or from erosion of the canyon walls by the debris flows. The slides, debris-flows, and multi-phase gravity flows observed in this study are petrographically different, indicating different sediment sources. This indicates that not all failures lead through flow transformation to the production of a multi-phase gravity flow, but only when the sediment source contains ample coarse-grained material. The spatial segregation of the slide, debris-flow, and multi-phase gravity-flow deposits is attributed to the different mobility of each transport process.  相似文献   

11.
A sediment slide complex has been mapped on the West African continental margin north of Dakar, Senegal. Four major slides covering approximately 44,300 km2 were delineated by seismic reflection profiles, 3.5 and 12 kHz echograms and piston cores. Although the slide areas have been altered by later erosion and deposition by turbidity flows, the major components of the slides — slide scar, zones of hummocky and blocky slide material and zones of debris flow — are recognizable. Cores containing flow folds with horizontal axial surfaces substantiate the echogram interpretations of debris flow. Morphology and depositional areas of the slides indicate that several major slide movements have occurred in each of the various slide areas. The triggering mechanism for these slides is perhaps earthquakes associated with the Cape Verde Islands, Cape Verde Plateau, and adjacent fracture zones.  相似文献   

12.
Ooid turbidites from the central western continental margin of India   总被引：1，自引：0，他引：1  
Gravity displaced debris flows/turbidites have been observed in five box cores collected between water depths of 649 and 3,627 m from the central western continental margin of India. Studies on grain size, carbonate content, and coarse fraction revealed that the turbidites are mainly composed of ooids, shell fragments, and shallow water benthic foraminifera. Bioclastic sediments of the outer shelf and upper slope regions are considered the source of the debris flows/turbidity deposits. It appears that the flows were initiated by failure on the outer shelf and upper slope during late Pleistocene low stands of sea level.  相似文献   

13.
The deep lacustrine gravity-flow deposits are widely developed in the lower Triassic Yanchang Formation, southeast Ordos Basin, central China. Three lithofacies include massive fine-grained sandstone, banded sandstone, and massive oil shale and mudstone. The massive fine-grained sandstones have sharp upper contacts, mud clasts, boxed-shaped Gamma Ray (GR) log, but no grading and Bouma sequences. In contrast, the banded sandstones display different bedding characteristics, gradational upper contacts, and fine-upward. The massive, fine-grained sandstones recognized in this study are sandy debrites deposited by sandy debris flows, while the banded sandstones are turbidites deposited by turbidity currents not bottom currents. The sediment source for these deep gravity-flow sediments is a sand-rich delta system prograding at the basin margin. Fabric of the debrites in the sandy debris fields indicates initial formation from slope failure caused by the tectonic movement. As the sandy debris flows became diluted by water and clay, they became turbidity currents. The deep lacustrine depositional model is different from the traditional marine fan or turbidite fan models. There are no channels or wide lobate sand bodies. In the lower Triassic Yanchang Formation, layers within the sandy debrites have higher porosity (8–14%) and permeability (0.1–4 mD) than the turbidites with lower porosity (3–8%) and permeability (0.04–1 mD). Consequently, only the sandy debrites constitute potential petroleum reservoir intervals. Results of this study may serve as a model for hydrocarbon exploration and production for deep-lacustrine reservoirs from gravity-flow systems in similar lacustrine depositional environments.  相似文献   

14.
Using an integrated multi-beam bathymetry, high-resolution seismic profile, piston core, and AMS 14C dating data set, the current study identified two sediment wave fields, fields 1 and 2, on the South China Sea Slope off southwestern Taiwan. Field 1 is located in the lower slope, and sediment waves within it are overall oriented perpendicular to the direction of down-slope gravity flows and canyon axis. Geometries, morphology, and internal seismic reflection configurations suggest that the sediment waves in field 1 underwent significant up-slope migration. Field 2, in contrast, is located more basinward, on the continental rise. Instead of having asymmetrical morphology and discontinuous reflections as observed in field 1, the sediment waves in field 2 show more symmetrical morphology and continuous reflections that can be traced from one wave to another, suggesting that vertical aggradation is more active and predominant than up-slope migration.Three sediment wave evolution stages, stage 1 through stage 3, are identified in both field 1 and field 2. During stage 1, the sediment waves are built upon a regional unconformity that separates the underlying mass-transport complexes from the overlying sediment waves. In both of these two fields, there is progressive development of the sediment waves and increase in wave dimensions from the oldest stage 1 to the youngest stage 3, even though up-slope migration is dominant in field 1 whereas vertical aggradation is predominant in field 2 throughout these three stages.The integrated data and the depositional model show that the upper slope of the study area is strongly dissected and eroded by down-slope gravity flows. The net result of strong erosion is that significant amounts of sediment are transported further basinward into the lower slope by gravity flows and/or turbidity currents. The interactions of these currents with bottom (contour) currents induced by the intrusion of the Northern Pacific Deep Water into the South China Sea and preexisting wavy topography in the lower slope result in the up-slope migrating sediment waves in field 1 and the contourites as observed from cores TS01 and TS02. Further basinward on the continental rise, turbidity currents are waned and diluted, whereas along-slope bottom (contour) currents are vigorous and most likely dominate over the diluted turbidity currents, resulting in the vertically aggraded sediment waves in field 2.The results from this study also provide the further evidence for the intrusion of the Northern Pacific Deep Water into the South China Sea and suggest that this intrusion has probably existed and been capable of affecting sedimentation in South China Sea at least since Quaternary.  相似文献   

15.
The Wollaston Forland Basin, NE Greenland, is a half-graben with a Middle Jurassic to Lower Cretaceous basin-fill. In this outcrop study we investigate the facies, architectural elements, depositional environments and sediment delivery systems of the deep marine syn-rift succession. Coarse-grained sand and gravel, as well as large boulders, were emplaced by rock-falls, debris flows and turbulent flows sourced from the immediate footwall. The bulk of these sediments were point-sourced and accumulated in a system of coalescing fans that formed a clastic wedge along the boundary fault system. In addition, this clastic wedge was supplied by a sand-rich turbidite system that is interpreted to have entered the basin axially, possibly via a prominent relay ramp within the main fault system. The proximal part of the clastic wedge consists of a steeply dipping, conformable succession of thick-bedded deposits from gravity flows that transformed down-slope from laminar to turbulent flow behaviour. Pervasive scour-and-fill features are observed at the base of the depositional slope of the clastic wedge, c. 5 km into the basin. These scour-fills are interpreted to have formed from high-density turbulent flows that were forced to decelerate and likely became subject to a hydraulic jump, forming plunge pools at the base of slope. The distal part of the wedge represents a basin plain environment and is characterised by a series of crude fining upward successions that are interpreted to reflect changes in the rate of accommodation generation and sediment supply, following from periodic increases in fault activity. This study demonstrates how rift basin physiography directly influences the behaviour of gravity flows. Conceptual models for the stratigraphic response to periodic fault activity, and the transformation and deposition of coarse-grained gravity flows in a deep water basin with strong contrasts in slope gradients, are presented and discussed.  相似文献   

16.
We present field evidence from the Middle Eocene deep-marine Ainsa Basin, Spanish Pyrenees, to show channel-like features likely created by erosive subaqueous debris flows. Evidence from this basin suggests that the most erosive subaqueous debris-flows may create megascours removing up to ∼35 m thickness of sandy submarine-fan deposits from base-of-slope and lower-slope settings. This study suggests that individual debris flows may have been more erosive than turbidity currents, an observation that is opposed to many previous studies from the Ainsa Basin and other ancient deep-water clastic systems. In the Ainsa Basin, many of the debris flows deposited pebbly mudstones immediately above the basal erosion surfaces into which gouging flow-parallel grooves and pebble scours left isolated pebbles embedded in the immediately underlying sandstones. In one particularly well-exposed case, the sandstones immediately below the eroding debris flow were incorporated into it and preserved as sheared, disaggregated, brecciated, and partially liquefied sandstone beds within the pebbly mudstone. Our study suggests that erosion by large-volume debris flows in base-of-slope settings can be at least as important, if not more so, than turbidity currents in producing submarine megascours (probably chutes that, in cross section, superficially resemble submarine channels). This has important implications for understanding the erosivity of debris flows versus turbidity currents in modern and ancient environments, and it has significant implications for hydrocarbon reservoir continuity and heterogeneity, including the origin and recognition of mudstone-filled chutes or channels.  相似文献   

17.
Debris flow deposits of large aerial extent have been detected on the lower continental rise off northwest Africa using GLORIA long-range dual sidescan sonar. A preliminary interpretation of the sonographs with high-resolution (3.5 kHz) seismic profiles and gravity cores illustrates the potential for spatial mapping of these deposits. The transport directions indicated on the sonographs show that these sediments, emplaced by mass transport, are the downslope continuation of the Saharan Sediment Slide. The distance from an observed “toe” of a debris flow lobe to the most southerly slide scar is of the order of 1,000 km.  相似文献   

18.
Parallel laminated, graded, and homogeneous muds of turbidity current origin are the predominant facies in the non-fan slope-centered Ulleung marginal basin during the last glacial period. Dilute turbidity currents were probably generated from slumps, slides, and debris flows on the slope. A mid-slope core contains poorly sorted mud-clast muds of debris flow origin. During the period of 75,000 and 10,000 years BP, turbidity currents occurred approximately every 125 years, each depositing about 0.5 km3 of mud with an accumulation rate of up to 40 cm/103 years. The basin was largely suboxic with a rare incursion of bottom currents.  相似文献   

19.
Thin-bedded debris flow deposits are an important constituent of the marine Quaternary, sequence in NW Baffin Bay, covering about 30,000 km2 of sea floor. Individual debris flows traveled over a slope as low as 0.4° and a distance of several hundred kilometers. Some debris flows have generated turbidity currents. Debris flow deposits observed in the cores displayed distinctive downslope trends in grain size, bed thickness, and sorting, and showed variations in structures and sequences of sedimentary structures with poorly to moderately well-developed gravel fabric, showing the long axes of clasts aligned nearly parallel to the bedding plane.  相似文献   

20.
Debris flow deposits of large aerial extent have been detected on the lower continental rise off northwest Africa using GLORIA long-range dual sidescan sonar. A preliminary interpretation of the sonographs with high-resolution (3.5 kHz) seismic profiles and gravity cores illustrates the potential for spatial mapping of these deposits. The transport directions indicated on the sonographs show that these sediments, emplaced by mass transport, are the downslope continuation of the Saharan Sediment Slide. The distance from an observed “toe” of a debris flow lobe to the most southerly slide scar is of the order of 1,000 km.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号