共查询到20条相似文献，搜索用时 46 毫秒
1.
为了研究海底滑坡对海洋单桩的冲击力大小,首先通过调整高岭土、粉砂的不同含量,得到不同流变特性、不同密度的碎屑流,采用Herschel-Bulkley模型和幂率模型对流体流变性质进行描述;随后利用自制海底滑坡模型槽,模拟碎屑流在不同流速和黏度下对模型桩的冲击;并结合流体力学理论,建立阻力系数与非牛顿流体雷诺数之间关系表达式。试验数据表明:碎屑流黏度和流速是影响海底滑坡冲击力的主要因素,海底滑坡冲击力随着泥浆黏度和流速的增加而增大。同时,考虑碎屑流剪切稀释特性,得到管桩阻力系数随雷诺数变化的拟合公式,为海洋桩基础设计提供参考。 相似文献
2.
Hui Chen Xinong Xie David Van Rooij Thomas Vandorpe Li Huang Laiyuan Guo Ming Su 《Marine Geophysical Researches》2013,34(3-4):239-257
Based upon 2D seismic data, this study confirms the presence of a complex deep-water sedimentary system within the Pliocene-Quaternary strata on the northwestern lower slope of the Northwest Sub-Basin, South China Sea. It consists of submarine canyons, mass-wasting deposits, contourite channels and sheeted drifts. Alongslope aligned erosive features are observed on the eastern upper gentle slopes (<1.2° above 1,500 m), where a V-shaped downslope canyon presents an apparent ENE migration, indicating a related bottom current within the eastward South China Sea Intermediate Water Circulation. Contourite sheeted drifts are also generated on the eastern gentle slopes (~1.5° in average), below 2,100 m water depth though, referring to a wide unfocused bottom current, which might be related to the South China Sea Deep Water Circulation. Mass wasting deposits (predominantly slides and slumps) and submarine canyons developed on steeper slopes (>2°), where weaker alongslope currents are probably dominated by downslope depositional processes on these unstable slopes. The NNW–SSE oriented slope morphology changes from a three-stepped terraced outline (I–II–III) east of the investigated area, into a two-stepped terraced (I–II) outline in the middle, and into a unitary steep slope (II) in the west, which is consistent with the slope steepening towards the west. Such morphological changes may have possibly led to a westward simplification of composite deep-water sedimentary systems, from a depositional complex of contourite depositional systems, mass-wasting deposits and canyons, on the one hand, to only sliding and canyon deposits on the other hand. 相似文献
3.
In the last decade, offshore pipeline engineering extended its action field to very deep waters and continental slopes. This implied the necessity to deal with continental slope instability and mass gravity flows. Mass gravity flows are rare and have random occurrence; therefore, considering also the technical difficulties, the direct measurement of the phenomena is practically impossible. This has encouraged the development of physical and numerical models for investigating the characteristics and intensity of the phenomena (Proc. OTC Conf., Houston, TX (2000); Proc. 19th OMAE Conference, New Orleans, LA (2000)). In order to provide design activities with reliable predictive tools, two numerical models, one for debris flows and the other for turbidity currents, have been developed. The two models are coupled by the bottom boundary conditions of the turbidity current model that depends on the instantaneous velocity of the debris flow model. The two models used together provide a tool for the evaluation of a mass gravity flow event starting as a debris flow and evolving into a turbidity current. 相似文献
4.
A high-resolution acoustic survey over a fjord side fan delta revealed distinctive bottom features resulting from slope instability processes. Delta-front chutes occurring on slopes of l3° are partially filled with radiating splays of coarse-grained sediment, apparently transported downslope by coarse-grained debris flows that originated on the subaerial slopes above the fan. Arcuate scarp patterns represent shallow successive, rotational slides, with numcrous small displacements of individual blocks and slabs of sediment. Blocky, ridged depositional areas occur at the base of the fan delta, but there is no evidence of long-distance mass movement farther downfjord. 相似文献
5.
A high-resolution acoustic survey over a fjord side fan delta revealed distinctive bottom features resulting from slope instability processes. Delta-front chutes occurring on slopes of l3° are partially filled with radiating splays of coarse-grained sediment, apparently transported downslope by coarse-grained debris flows that originated on the subaerial slopes above the fan. Arcuate scarp patterns represent shallow successive, rotational slides, with numcrous small displacements of individual blocks and slabs of sediment. Blocky, ridged depositional areas occur at the base of the fan delta, but there is no evidence of long-distance mass movement farther downfjord. 相似文献
6.
The South China Sea (SCS) shows favorable conditions for gas hydrate accumulation and exploration prospects. Bottom simulating reflectors (BSRs) are widely distributed in the SCS. Using seismic and sequence stratigraphy, the spatial distribution of BSRs has been determined in three sequences deposited since the Late Miocene. The features of gas hydrate accumulations in northern SCS were systematically analyzed by an integrated analysis of gas source conditions, migration pathways, heat flow values, occurrence characteristics, and depositional conditions (including depositional facies, rates of deposition, sand content, and lithological features) as well as some depositional bodies (structural slopes, slump blocks, and sediment waves). This research shows that particular geological controls are important for the presence of BSRs in the SCS, not so much the basic thermodynamic controls such as temperature, pressure and a gas source. Based on this, a typical depositional accumulation model has been established. This model summarizes the distribution of each depositional system in the continental shelf, continental slope, and continental rise, and also shows the typical elements of gas hydrate accumulations. BSRs appear to commonly occur more in slope-break zones, deep-water gravity flows, and contourites. The gas hydrate-bearing sediments in the Shenhu drilling area mostly contain silt or clay, with a silt content of about 70%. In the continental shelf, BSRs are laterally continuous, and the key to gas hydrate formation and accumulation lies in gas transportation and migration conditions. In the continental slope, a majority of the BSRs are associated with zones of steep and rough relief with long-term alternation of uplift and subsidence. Rapid sediment unloading can provide a favorable sedimentary reservoir for gas hydrates. In the continental rise, BSRs occur in the sediments of submarine fans, turbidity currents. 相似文献
7.
Daniel Jean Stanley 《Geo-Marine Letters》1982,2(3-4):149-155
Some massive channelized strata preserved in the rock record are characterized by a lower slump member which evolves upward
to a turbidite. This merging is indicative of probable generation of sediment gravity flows from submarine sliding. Conditions
essential for deposition of such sequences are short transport distance between point of failure and depositional site, and
an environment likely to retain both facies. Fan valleys are a likely setting for welded couplets: flowing sand, initiated
by the sliding event, comes to rest at nearly the same time and position as the slump mass deposited near the base of the
valley wall and in the axis proper. 相似文献
8.
Sungduk Kim 《Marine Georesources & Geotechnology》2013,31(6):572-578
The purpose of this study is to evaluate the behavior and mechanism of a debris flow on various slopes through numerical simulation. The numerical simulation consisted of using equations related to mass conservation and momentum conservation in order to consider erosion and deposition, and the Finite Difference Method was applied. As the inflow water discharge in the upstream of the channel increases, the curve of the water discharge exhibits instability and, as time passes, the fluctuation of the high water discharge continues. In regions where the mountain areas and the ocean are connected, it is deduced that the high level of sediment concentration can greatly affect the environment surrounding the ocean. The numerical model of this study was applied in Kangwon Province of South Korea. The results show that when the debris flow reaches downstream, the flow discharge and water flow depth increase. Erosion occurs more than deposition and much of the sediment runs off downstream. The result of the simulation performed at point of sediment discharge runoff is 114,216 m3. This study will provide useful information in predicting disasters caused by debris flow and in planning for various countermeasures to prevent debris-flow-related disasters. 相似文献
9.
Offshore pipelines are critical infrastructures and any possible damage may have devastating financial and environmental consequences. Earthquake-related geohazards (such as strong ground motion, active seismic faults, submarine landslides and debris flows) consist crucial threats that an offshore pipeline has to overcome. The main aim of the current study is to examine analytically a seabed-laid offshore pipeline subjected to a lateral kinematic distress due to a submarine landslide or a debris flow. Extra emphasis is given on the impact of pipe-soil interaction on the pipe response, by the realistic representation of the soil resistance via a tri-linear model. Firstly, the proposed analytical model is validated with a numerical model utilizing the finite-element method. Subsequently, various combinations of soil parameters and loading conditions that affect the examined problem are investigated with realistic input data taken from the offshore section of the high-pressure natural-gas pipeline TAP (Trans Adriatic Pipeline) in the Adriatic Sea. Finally, useful conclusions are drawn regarding the applicability and the efficiency of the proposed approach. 相似文献
10.
Robert D. Jacobi 《Marine Geology》1976,22(3):157-173
A sediment slide complex has been mapped on the West African continental margin north of Dakar, Senegal. Four major slides covering approximately 44,300 km2 were delineated by seismic reflection profiles, 3.5 and 12 kHz echograms and piston cores. Although the slide areas have been altered by later erosion and deposition by turbidity flows, the major components of the slides — slide scar, zones of hummocky and blocky slide material and zones of debris flow — are recognizable. Cores containing flow folds with horizontal axial surfaces substantiate the echogram interpretations of debris flow. Morphology and depositional areas of the slides indicate that several major slide movements have occurred in each of the various slide areas. The triggering mechanism for these slides is perhaps earthquakes associated with the Cape Verde Islands, Cape Verde Plateau, and adjacent fracture zones. 相似文献
11.
波致海底缓倾角无限坡滑动稳定性计算分析探讨 总被引：1，自引：1，他引：0
波浪作用下海底无限坡滑动稳定性计算的极限平衡法中,忽略了坡体水平向应力状态的影响,为此,针对波浪作用下海底缓倾角无限边坡的特点,提出直接基于滑动面处土体应力状态的滑动稳定性计算方法(简称应力状态法),并分析了其适用范围。对具体算例的分析表明,应力状态法计算得出的安全系数大于极限平衡法的安全系数,且随着滑动面深度的增加、土体泊松比以及边坡坡角的增大,两种计算方法得出的安全系数的差异会逐渐增大;对于波浪作用下的海底缓倾角无限边坡,在失稳时极可能沿具有一定厚度的滑动带而不是单一的滑动面而滑动,且波致最大剪应力所在的深度,常常不是斜坡体最易失稳滑移的深度。 相似文献
12.
The Plio-Pleistocene stratigraphic record of the Peri-Adriatic basin (eastern central Italy) is well exposed along the uplifted western margin of the basin and consists of a series of coarse-grained slope canyon fills encased in a thick succession of hemipelagic mudstones. This study deals with the detailed sedimentology, stratal architecture, and sequence-stratigraphic interpretation of two of these submarine canyon-fills (namely CMC1 and CMC2) exposed at Colle Montarone. These strata contain widespread evidence of gravity-driven sedimentation processes, with high- and low-density turbidity currents, slumps and cohesive debris flows being responsible for most of the sediment transport and deposition. Beds are organised into four recurrent lithofacies, each corresponding to a specific deep-water depositional element: (i) clast-supported conglomerates (channel complexes); (ii) thin-bedded sandstones and mudstones (levee-overbank); (iii) very thinly-bedded mudstones (tributary channels); (iv) pebbly mudstones and chaotically bedded mudstones (mass-transport complexes). 相似文献
13.
Qi-Liang Sun Shi-Guo Wu Thomas Lüdmann Bin Wang Tao-Tao Yang 《Marine Geophysical Researches》2011,32(3):415-428
Gravity flow deposits form a significant component of the stratigraphic record in ancient and modern deep-water basins worldwide.
Analyses of high-resolution 3D seismic reflection data in a predominantly slope setting, the southern slope of Qiongdongnan
Basin, South China Sea, reveal the extensive presence of gravity flow depositional elements in the Late Pliocene−Quaternary
strata. Three key elements were observed: (1) mass transport deposits (MTDs) including slumps and debris flows, (2) turbidity
current deposits including distributary channel complexes, leveed channel complexes and avulsion channel complexes, and (3)
deep-water drapes (highstand condensed sections). Each depositional element displays a unique seismic expression and internal
structures in seismic profiles and attribute maps. Based on seismic characteristics, the studied succession is subdivided
into six units in which three depositional cycles are identified. Each cycle exhibits MTDs (slump or debris) at the base,
overlain by turbidities or a deep-water drape. The genesis of these cycles is mainly controlled by frequent sea-level fluctuations
and high sedimentation rates in the Late Pliocene–Quaternary. Moreover, tectonics, differential subsidence, and paleo-seafloor
morphology may have also contributed to their formation processes. The present study is aimed to a better understanding of
deep-water depositional systems, and to a successful hydrocarbon exploration and engineering-risk assessment. 相似文献
14.
G. Ercilla D. Casas F. Estrada J.T. Vázquez J. Iglesias M. García M. Gómez J. Acosta J. Gallart A. Maestro-González 《Marine Geology》2008,247(1-2):61-83
Multibeam bathymetry, high (sleeve airguns) and very high resolution (parametric system-TOPAS-) seismic records were used to define the morphosedimentary features and investigate the depositional architecture of the Cantabrian continental margin. The outer shelf (down to 180–245 m water depth) displays an intensively eroded seafloor surface that truncates consolidated ancient folded and fractured deposits. Recent deposits are only locally present as lowstand shelf-margin deposits and a transparent drape with bedforms. The continental slope is affected by sedimentary processes that have combined to create the morphosedimentary features seen today. The upper (down to 2000 m water depth) and lower (down to 3700–4600 m water depth) slopes are mostly subject to different types of slope failures, such as slides, mass-transport deposits (a mix of slumping and mass-flows), and turbidity currents. The upper slope is also subject to the action of bottom currents (the Mediterranean Water — MW) that interact with the Le Danois Bank favouring the reworking of the sediment and the sculpting of a contourite system. The continental rise is a bypass region of debris flows and turbidity currents where a complex channel-lobe transition zone (CLTZ) of the Cap Ferret Fan develops.The recent architecture depositional model is complex and results from the remaining structural template and the great variability of interconnected sedimentary systems and processes. This margin can be considered as starved due to the great sediment evacuation over a relatively steep entire depositional profile. Sediment is eroded mostly from the Cantabrian and also the Pyrenees mountains (source) and transported by small stream/river mountains to the sea. It bypasses the continental shelf and when sediment arrives at the slope it is transported through a major submarine drainage system (large submarine valleys and mass-movement processes) down to the continental rise and adjacent Biscay Abyssal Plain (sink). Factors controlling this architecture are tectonism and sediment source/dispersal, which are closely interrelated, whereas sea-level changes and oceanography have played a minor role (on a long-term scale). 相似文献
15.
Kathryn J. Amos Jeff Peakall P. William Bradbury Mat Roberts Gareth Keevil Sanjeev Gupta 《Marine and Petroleum Geology》2010
We present a series of experiments that investigate the morphology of sediment deposits within sinuous submarine channels of different sinuosity (S = 1.14–1.94) and planform (symmetric and asymmetric bends), generated by bedload-dominated turbidity current flows. Flows were generated by releasing dense saline gravity currents over a mobile sediment bed through pre-formed sinuous channels. Flows had a basal-outwards helicity and produced a characteristic bed morphology with point bars downstream of the bend apex at the inside of bends and scour at the outside of bends. An increasing loss of fluid through overspill with increasing channel sinuosity results in a decreasing magnitude of cross-stream velocity downstream, a decreasing amount of erosion and deposition, and decreasing transverse slopes of in-channel deposits. Basal fluid from within the channel is transported over the outer-levee at bends, implying that proximal outer-bend levee deposits will have similar sediment composition to that within the channel. More deposition of coarse material might be expected on levees and in overbank regions close to higher amplitude bends. No simple relationship was observed between superelevation and sinuosity, probably due to changes in the relative influences of downstream velocity and bend curvature on centrifugal force and inertial run-up. In the channel with the tightest initial bend curvature, overspill fluid from Bend 1 re-entered the channel at Bend 2, dominating flow characteristics and disrupting the basal-outwards helicity observed in the other channels. Higher sinuosity channels and those with shallow regional and levee slopes are thus more likely to have a higher proportion of anomalous flow and sedimentation patterns due to the influence of overspill fluid re-entry into the channel. The results of this investigation are combined with published observations to enable the synthesis of a new model for sedimentation in sinuous submarine channels. 相似文献
16.
We present field evidence from the Middle Eocene deep-marine Ainsa Basin, Spanish Pyrenees, to show channel-like features likely created by erosive subaqueous debris flows. Evidence from this basin suggests that the most erosive subaqueous debris-flows may create megascours removing up to ∼35 m thickness of sandy submarine-fan deposits from base-of-slope and lower-slope settings. This study suggests that individual debris flows may have been more erosive than turbidity currents, an observation that is opposed to many previous studies from the Ainsa Basin and other ancient deep-water clastic systems. In the Ainsa Basin, many of the debris flows deposited pebbly mudstones immediately above the basal erosion surfaces into which gouging flow-parallel grooves and pebble scours left isolated pebbles embedded in the immediately underlying sandstones. In one particularly well-exposed case, the sandstones immediately below the eroding debris flow were incorporated into it and preserved as sheared, disaggregated, brecciated, and partially liquefied sandstone beds within the pebbly mudstone. Our study suggests that erosion by large-volume debris flows in base-of-slope settings can be at least as important, if not more so, than turbidity currents in producing submarine megascours (probably chutes that, in cross section, superficially resemble submarine channels). This has important implications for understanding the erosivity of debris flows versus turbidity currents in modern and ancient environments, and it has significant implications for hydrocarbon reservoir continuity and heterogeneity, including the origin and recognition of mudstone-filled chutes or channels. 相似文献
17.
《Marine and Petroleum Geology》2003,20(6-8):757-787
This paper presents a process-response model for submarine channel-lobe systems based on the integration of sedimentology, architectural element analysis, paleogeographic reconstructions, and stratigraphy to characterize the migration patterns of the channel-lobe transition zone (CLTZ). In the Permian Brushy Canyon basinal cycle, deposition is the product of the basinward then landward migration of the CLTZ across the depositional profile (zonal or facies tract shift). This is expressed in outcrop by the vertical association of sandstone lobes overlain by channel fills capped by sandstone lobes. Linking these sedimentary bodies to their facies associations provides the framework for relating variable degrees of flow confinement to small-scale composite erosional depressions (less than 150 m wide by 5 m deep). This model identifies (1) coeval geomorphological expressions of the depositional profile and (2) the stratigraphic evolution of depositional cycles at every profile position. This permits relating facies associations to lateral and longitudinal changes in flow conditions at the time of deposition. Stacking patterns, geometry of sedimentary bodies and facies associations reflect fluctuations in flow volume and efficiency. Architectural element analysis differentiates evolutionary phases of channel-lobe systems. The power of the model lies in its ability to compare architecture and evolution across several scales of sedimentary bodies. Recognizing the vertical and lateral association of sedimentary bodies, arranged in a hierarchical order, permits understanding how the geomorphological building blocks of this depositional system change through time. Channel-fill, channel-flank and lobe strata represent the building blocks that form composite features documented at four scales. These range from tens of meters to several kilometers wide, by meters to hundreds of meters thick. Areal distribution of sedimentary bodies at each scale responds to specific controls, i.e. flow volume and topography. For example, channels extending basinward of a canyon mouth form local depositional topography that produces lateral migration of channel-lobe systems through time. This strongly controls the frequency of channel avulsion and lateral deposition. 相似文献
18.
Two fundamentally different types of submarine canyons along the continental margin of Equatorial Guinea 总被引：1，自引：0，他引：1
Most submarine canyons are erosive conduits cut deeply into the world’s continental shelves through which sediment is transported from areas of high coastal sediment supply onto large submarine fans. However, many submarine canyons in areas of low sediment supply do not have associated submarine fans and show significantly different morphologies and depositional processes from those of ‘classic’ canyons. Using three-dimensional seismic reflection and core data, this study contrasts these two types of submarine canyons and proposes a bipartite classification scheme.The continental margin of Equatorial Guinea, West Africa during the late Cretaceous was dominated by a classic, erosional, sand-rich, submarine canyon system. This system was abandoned during the Paleogene, but the relict topography was re-activated in the Miocene during tectonic uplift. A subsequent decrease in sediment supply resulted in a drastic transformation in canyon morphology and activity, initiating the ‘Benito’ canyon system. This non-typical canyon system is aggradational rather than erosional, does not indent the shelf edge and has no downslope sediment apron. Smooth, draping seismic reflections indicate that hemipelagic deposition is the chief depositional process aggrading the canyons. Intra-canyon lateral accretion deposits indicate that canyon concavity is maintained by thick (>150 m), dilute, turbidity currents. There is little evidence for erosion, mass-wasting, or sand-rich deposition in the Benito canyon system. When a canyon loses flow access, usually due to piracy, it is abandoned and eventually filled. During canyon abandonment, fluid escape causes the successive formation of ‘cross-canyon ridges’ and pockmark trains along buried canyon axes.Based on comparison of canyons in the study area, we recognize two main types of submarine canyons: ‘Type I’ canyons indent the shelf edge and are linked to areas of high coarse-grained sediment supply, generating erosive canyon morphologies, sand-rich fill, and large downslope submarine fans/aprons. ‘Type II’ canyons do not indent the shelf edge and exhibit smooth, highly aggradational morphologies, mud-rich fill, and a lack of downslope fans/aprons. Type I canyons are dominated by erosive, sandy turbidity currents and mass-wasting, whereas hemipelagic deposition and dilute, sluggish turbidity currents are the main depositional processes sculpting Type II canyons. This morphology-based classification scheme can be used to help predict depositional processes, grain size distributions, and petroleum prospectivity of any submarine canyon. 相似文献
19.
The Neogene and Quaternary sediments of the Faeroe-Shetland Channel and West Shetland shelf and slope rest upon a major regional unconformity, the Latest Oligocene Unconformity (LOU), and have been deposited through the interaction of downslope and parallel-to-slope depositional processes. The upper to middle continental slope is dominated by mass-transport deposits (debris flows), which progressively diminish downslope, and were largely generated and deposited during glacial cycles when ice sheets supplied large quantities of terrigeneous sediment to the upper slope and icebergs scoured sea-floor sediments on the outer shelf and uppermost slope. Large-scale sediment failures have also occurred on the upper slope and resulted in deposition of thick, regionally extensive mass-transport deposits on portions of the lower slope and channel floor. In contrast, large fields of migrating sediment waves and drift deposits dominate most of the middle to lower slope below 700 m water depth and represent deposition by strong contour currents of the various water masses moving northeastward and southwestward through the channel. These migrating sediment waves indicate strong northeastward current flow at water depths shallower than 700 m and strong southwestward current flow at water depths from 700 to >1,400 m. These flow directions are consistent with present-day water-mass flow through the Faeroe-Shetland Channel. The Faeroe-Shetland Channel floor is underlain by thin conformable sediments that appear to be predominantly glacial marine and hemipelagic with less common turbidites and debris flows. No evidence is observed in seismic or core data that indicates strong contour-current erosion or redistribution of sediments along the channel floor. 相似文献
20.
Hans Nelson 《Marine Geology》1976,22(2):129-155
The asymmetrical Astoria Fan (110 × 180 km) developed off the Columbia River and Astoria submarine canyon during the Pleistocene. Morphology, stratigraphy, and lithology have been outlined for a Pleistocene turbidite, and a Holocene hemipelagic sedimentary regime to generate geologically significant criteria for comparison with ancient equivalent deposits. Both gray silty clay of the Late Pleistocene and olive-gray clay of the Early Holocene are interrupted by turbidites. The few deeply incised fan valleys of the more steeply sloping upper fan contain thick, muddy and very poorly sorted sand and gravel beds that usually have poorly developed internal sedimentary structures. The numerous shallower fan valleys and distributaries of the flatter middle and lower fan contain thick, clean, and moderately sorted medium to fine sands that are vertically graded in texture, composition and well-developed internal sedimentary structures. Tuffaceous turbidites (containing Mazama ash, 6600 B.P.) can be traced as thick deposits (ca. 30–40 cm) throughout the Astoria Channel system and as thin correlative interbeds (ca. 1–2 cm) in interchannel areas. Similarly, sand/shale ratios are high throughout the fan valleys and the middle and lower fan areas of distributaries, but are low in the upper-fan interchannel areas.These depositional trends indicate that high-density turbidity currents carry coarse traction loads that remain confined in upper but not lower fan valleys. Fine debris selectively sorts out from channelized flows into overbank suspension flows that spread over the fan and deposit clayey silt. A high content of mica, plant fragments, and glass shards (if present) characterizes deposits of the overbank flows, a major process in the building of upper fan levees and interchannel areas.In the Late Pleistocene, turbidity currents funneled most coarse-grained debris through upper channels to depositional sites in middle and lower fan distributaries that periodically shifted, anastomosed and braided to spread sand layers throughout the area. At this time, depositional rates were many times greater (>50 cm/1000 years) than in the Holocene (8 cm/1000 years).During the Holocene rise of sea level, the shoreline shifted, the Columbia River sediment was trapped, and turbidity-current activity slackened from one major event per 6 years in the Late Pleistocene, to one per 1000 years in the Early Holocene, to none since the Mt. Mazama eruption (ca. 6600 B.P.). Turbidites became muddier and deposited as thick beds within main channels, in part explaining Holocene deposition rates three times greater there (25 cm/1000 years) than in interchannel regions. Turbid-layer debris, funneled through channel systems and trapped from flows off the continental terrace, also contributed to rapid sedimentation in valleys; however, less than 2% of the suspended sediment load of the Columbia River has been trapped in fan valleys during the Holocene.By the Late Holocene, continuous particle-by-particle deposition of hemipelagic clay with a biogenous coarse fraction was the predominant process on the fan. These hemipelagites contain progressively more clay size and less terrigenous debris offshore, and are finer grained, richer in planktonic tests and dominated by radiolarians compared to the foraminiferal-rich Pleistocene clays. The hemipelagic sedimentation of interglacial times, however, is insignificant compared to turbidite deposition of glacial times. 相似文献