共查询到20条相似文献，搜索用时 28 毫秒
1.
An analysis of 3D seismic data from the northwestern part of the Ulleung Basin, East Sea, revealed that the gas hydrate stability zone (GHSZ) consists of five seismic units separated by regional reflectors. An anticline is present that documents activity of many faults. The seismic indicators of gas hydrate occurrence included bottom simulating reflector (BSR) and acoustic blanking in the gas hydrate occurrence zone (GHOZ). By the analysis of the seismic characteristics and the gradient of the sedimentary strata, the GHOZ was divided into four classes: (1) dipping strata upon strong BSR, (2) dipping strata below strong BSR, (3) parallel strata with acoustic blanking, and (4) parallel strata below weak BSR. Seismic attributes such as reflection strength and instantaneous frequency were computed along the GHOZ. Low reflection strength and high instantaneous frequency were identified above the BSR, indicating the occurrence of gas hydrate. A remarkably high reflection strength and low instantaneous frequency indicated the presence of free gas below the BSR. Considering the distribution of the gas hydrate and free gas, two gas migration processes are suggested: (1) stratigraphic migration through the dipping, permeable strata and (2) structural migration from below the GHSZ along faults. 相似文献
2.
3.
《Marine and Petroleum Geology》2012,35(1):119-133
The gas hydrate petroleum system at the 2009 Gulf of Mexico Gas Hydrate Joint Industry Project Leg II (JIP Leg II) Green Canyon 955 (GC955) site shows a complex seismic amplitude and waveform response of highly negative and positive amplitudes with continuous and discontinuous character within inferred gas-hydrate- and gas-bearing sand reservoirs. Logging-while-drilling (LWD) data obtained during JIP Leg II and conventional 3-D seismic data allowed for the identification of thick highly concentrated hydrate layers by integrating rock physics modeling, amplitude and thin layer analysis, and spectral decomposition. Rock physics modeling with constraints from three JIP LWD holes allowed for the analysis of variations in acoustic amplitude characteristics as a product of hydrate saturation, gas saturation, and reservoir thickness. Using the well log-derived acoustic models, thick highly concentrated gas hydrate with and without underlying free gas accumulations have been identified. These results suggest that thick highly concentrated gas-hydrate-bearing sand units (with thicknesses greater than half of the seismic tuning thickness and gas hydrate saturations greater than 50%) underlain by gas can be differentiated from sands containing only gas, but thin gas-hydrate-bearing sand units with low gas hydrate concentrations (with thicknesses less than half of the seismic tuning thickness and gas hydrate saturations less than 50%) are difficult to identify from post-stack seismic amplitude data alone. Within GC955, we have identified six zones with seismic amplitude anomalies interpreted as being caused by gas hydrate deposits with variable lateral extent, thickness and saturation, and in some cases overlying free-gas-bearing intervals. Synthetic seismic images produced from well-log- and model-derived velocity and density distributions mimic similar reflection characteristics in the corresponding field seismic data. 相似文献
4.
Downhole wireline log (DWL) data was acquired from eight drill sites during China's first gas hydrate drilling expedition (GMGS-1) in 2007. Initial analyses of the acquired well log data suggested that there were no significant gas hydrate occurrences at Site SH4. However, the re-examination of the DWL data from Site SH4 indicated that there are two intervals of high resistivity, which could be indicative of gas hydrate. One interval of high resistivity at depth of 171–175 m below seafloor (mbsf) is associated with a high compressional- wave (P-wave) velocities and low gamma ray log values, which suggests the presence of gas hydrate in a potentially sand-rich (low clay content) sedimentary section. The second high resistivity interval at depth of 175–180 mbsf is associated with low P-wave velocities and low gamma values, which suggests the presence of free gas in a potentially sand-rich (low clay content) sedimentary section. Because the occurrence of free gas is much shallower than the expected from the regional depth of the bottom simulating reflector (BSR), the free gas could be from the dissociation of gas hydrate during drilling or there may be a local anomaly in the depth to the base of the gas hydrate stability zone. In order to determine whether the low P-wave velocity with high resistivity is caused by in-situ free gas or dissociated free gas from the gas hydrate, the surface seismic data were also used in this analysis. The log analysis incorporating the surface seismic data through the construction of synthetic seismograms using various models indicated the presence of free gas directly in contact with an overlying gas hydrate-bearing section. The occurrence of the anomalous base of gas hydrate stability at Site SH4 could be caused by a local heat flow conditions. This paper documents the first observation of gas hydrate in what is believed to be a sand-rich sediment in Shenhu area of the South China Sea. 相似文献
5.
In the Shenhu area of the northern South China Sea (SCS), canyon systems and focused fluid flow systems increase the complexity of the gas hydrate distribution in the region. It also induces difficulties in predicting the hydrate reservoir characteristics and quantitatively evaluating reservoir parameters. In this study, several inversion methods have been executed to estimate the velocities of strata and gas hydrate concentrations along a profile in the Shenhu area. The seismic data were inverted to obtain the reflection coefficient of each stratum via a spectral inversion method. Stratigraphic horizons were then delineated by tracking the inverted reflectivities. Based on the results of spectral inversion, a low-frequency velocity field of the strata was constructed for acoustic impedance inversion. Using a new iterative algorithm for acoustic impedance inversion, reflection coefficients were converted into velocities, and the velocity variations of the strata along a 2D seismic line were then obtained. Subsequently, gas hydrate saturations at well SH2 were estimated via the shale-corrected resistivity method, the chloride ion concentration method and three different rock physics models. The results were then compared to determine the optimal rock physics model, and the modified Wood equation (MWE) was found to be appropriate for this area. Finally, the inverted velocities and MWE were used to predict the distribution and concentrations of gas hydrates along the seismic line. The estimated spatial distribution of gas hydrates is consistent with that from sonic logging and resistivity data at well SH2, and with the drilling results. Therefore, this method is applicable in areas with no well data, or with few wells, and provides an effective tool for predicting and evaluating gas hydrates using seismic data. 相似文献
6.
The Hikurangi Margin, east of the North Island of New Zealand, is known to contain significant deposits of gas hydrates. This has been demonstrated by several multidisciplinary studies in the area since 2005. These studies indicate that hydrates in the region are primarily located beneath thrust ridges that enable focused fluid flow, and that the hydrates are associated with free gas. In 2009–2010, a seismic dataset consisting of 2766 km of 2D seismic data was collected in the undrilled Pegasus Basin, which has been accumulating sediments since the early Cretaceous. Bottom-simulating reflections (BSRs) are abundant in the data, and they are accompanied by other features that indicate the presence of free gas and concentrated accumulations of gas hydrate. We present results from a detailed qualitative analysis of the data that has made use of automated high-density velocity analysis to highlight features related to the hydrate system in the Pegasus Basin. Two scenarios are presented that constitute contrasting mechanisms for gas-charged fluids to breach the base of the gas hydrate stability zone. The first mechanism is the vertical migration of fluids across layers, where flow pathways do not appear to be influenced by stratigraphic layers or geological structures. The second mechanism is non-vertical fluid migration that follows specific strata that crosscut the BSR. One of the most intriguing features observed is a presumed gas chimney within the regional gas hydrate stability zone that is surrounded by a triangular (in 2D) region of low reflectivity, approximately 8 km wide, interpreted to be the result of acoustic blanking. This chimney structure is cored by a ∼200-m-wide low-velocity zone (interpreted to contain free gas) flanked by high-velocity bands that are 200–400 m wide (interpreted to contain concentrated hydrate deposits). 相似文献
7.
Multichannel seismic data, containing high-amplitude reflections from Cenozoic sediments of the Bjørnøya Basin, southwestern Barents Sea, have been studied, inferring the existence of gas hydrate and free gas. The Cenozoic succession comprises Late Palaeocene and Early Eocene claystones and siltstones and locally also some sandstones overlain by Late Pleistocene glaciogenic sediments. The inferred gas hydrate and free gas accumulations are mainly located in the vicinity of larger faults which can be followed up to base Tertiary level, and which seem to have controlled the geographical distribution of the accumulations. Free gas accumulations are inferred to occur most frequently within the Late Palaeocene strata that occur below the gas hydrate stability zone, and indicate that relatively small gas leakages from deeper accumulations have dominated. Larger gas leakages have probably led to gas migration up into the gas hydrate stability zone and, together with the increasing thickness of the hydrate stability zone towards the north, control the distribution of the suspected gas hydrates. The inferred gas leakages are closely related to the Cenozoic evolution of the Barents Sea, and are probably caused by gas expansion due to the removal of up to 1 km of sediments from the Barents Sea shelf and/or reservoir tilting during the Late Cenozoic glaciations which affected this area. 相似文献
8.
The South China Sea (SCS) shows favorable conditions for gas hydrate accumulation and exploration prospects. Bottom simulating reflectors (BSRs) are widely distributed in the SCS. Using seismic and sequence stratigraphy, the spatial distribution of BSRs has been determined in three sequences deposited since the Late Miocene. The features of gas hydrate accumulations in northern SCS were systematically analyzed by an integrated analysis of gas source conditions, migration pathways, heat flow values, occurrence characteristics, and depositional conditions (including depositional facies, rates of deposition, sand content, and lithological features) as well as some depositional bodies (structural slopes, slump blocks, and sediment waves). This research shows that particular geological controls are important for the presence of BSRs in the SCS, not so much the basic thermodynamic controls such as temperature, pressure and a gas source. Based on this, a typical depositional accumulation model has been established. This model summarizes the distribution of each depositional system in the continental shelf, continental slope, and continental rise, and also shows the typical elements of gas hydrate accumulations. BSRs appear to commonly occur more in slope-break zones, deep-water gravity flows, and contourites. The gas hydrate-bearing sediments in the Shenhu drilling area mostly contain silt or clay, with a silt content of about 70%. In the continental shelf, BSRs are laterally continuous, and the key to gas hydrate formation and accumulation lies in gas transportation and migration conditions. In the continental slope, a majority of the BSRs are associated with zones of steep and rough relief with long-term alternation of uplift and subsidence. Rapid sediment unloading can provide a favorable sedimentary reservoir for gas hydrates. In the continental rise, BSRs occur in the sediments of submarine fans, turbidity currents. 相似文献
9.
10.
Gas hydrate was discovered in the Krishna–Godavari (KG) Basin during the India National Gas Hydrate Program (NGHP) Expedition 1 at Site NGHP-01-10 within a fractured clay-dominated sedimentary system. Logging-while-drilling (LWD), coring, and wire-line logging confirmed gas hydrate dominantly in fractures at four borehole sites spanning a 500 m transect. Three-dimensional (3D) seismic data were subsequently used to image the fractured system and explain the occurrence of gas hydrate associated with the fractures. A system of two fault-sets was identified, part of a typical passive margin tectonic setting. The LWD-derived fracture network at Hole NGHP-01-10A is to some extent seen in the seismic data and was mapped using seismic coherency attributes. The fractured system around Site NGHP-01-10 extends over a triangular-shaped area of ∼2.5 km2 defined using seismic attributes of the seafloor reflection, as well as “seismic sweetness” at the base of the gas hydrate occurrence zone. The triangular shaped area is also showing a polygonal (nearly hexagonal) fault pattern, distinct from other more rectangular fault patterns observed in the study area. The occurrence of gas hydrate at Site NGHP-01-10 is the result of a specific combination of tectonic fault orientations and the abundance of free gas migration from a deeper gas source. The triangular-shaped area of enriched gas hydrate occurrence is bound by two faults acting as migration conduits. Additionally, the fault-associated sediment deformation provides a possible migration pathway for the free gas from the deeper gas source into the gas hydrate stability zone. It is proposed that there are additional locations in the KG Basin with possible gas hydrate accumulation of similar tectonic conditions, and one such location was identified from the 3D seismic data ˜6 km NW of Site NGHP-01-10. 相似文献
11.
Cristián Rodrigo Antonio González-Fernández Emilio Vera 《Marine Geophysical Researches》2009,30(1):1-19
Multichannel seismic reflection data recorded between Arauco Gulf (37°S) and Valdivia (40°S), on the Chilean continental margin,
were processed and modeled to obtain seismic images and sub-surface models, in order to characterize the variability of the
bottom-simulating reflector (BSR), which is a geophysical marker for the presence of gas hydrates. The BSR is discontinuous
and interrupted by submarine valleys, canyons, as well as by faults or fractures. The BSR occurrence is more common south
of Mocha Island due to moderate slopes and greater organic matter contribution by rivers in that area. Tectonic uplift and
structural instability change the stability gas hydrate zone and consequently the BSR position, creating in some cases missing
or double BSRs. Our modeling supports the presence of gas hydrate above the BSR and free gas below it. Higher BSR amplitudes
support higher hydrate or free gas concentrations. In the study area, gas hydrate concentration is low (an average of 3.5%)
suggesting disseminated gas hydrate distribution within the sediments. Also higher BSR amplitudes are associated with thrust
faults in the accretionary prism, which serve as conduits for gas flow from deeper levels. This extra gas supply produces
a wider thickness of gas hydrates or free gas. 相似文献
12.
In 2006, the United States Geological Survey (USGS) completed a detailed analysis and interpretation of available 2-D and 3-D seismic data, along with seismic modeling and correlation with specially processed downhole well log data for identifying potential gas hydrate accumulations on the North Slope of Alaska. A methodology was developed for identifying sub-permafrost gas hydrate prospects within the gas hydrate stability zone in the Milne Point area. The study revealed a total of 14 gas hydrate prospects in this area.In order to validate the gas hydrate prospecting protocol of the USGS and to acquire critical reservoir data needed to develop a longer-term production testing program, a stratigraphic test well was drilled at the Mount Elbert prospect in the Milne Point area in early 2007. The drilling confirmed the presence of two prominent gas-hydrate-bearing units in the Mount Elbert prospect, and high quality well logs and core data were acquired. The post-drill results indicate pre-drill predictions of the reservoir thickness and the gas-hydrate saturations based on seismic and existing well data were 90% accurate for the upper unit (hydrate unit D) and 70% accurate for the lower unit (hydrate unit C), confirming the validity of the USGS approach to gas hydrate prospecting. The Mount Elbert prospect is the first gas hydrate accumulation on the North Slope of Alaska identified primarily on the basis of seismic attribute analysis and specially processed downhole log data. Post-drill well log data enabled a better constraint of the elastic model and the development of an improved approach to the gas hydrate prospecting using seismic attributes. 相似文献
13.
S. Chand J. Mienert K. Andreassen J. Knies L. Plassen B. Fotland 《Marine and Petroleum Geology》2008,25(7):625-636
The Barents Sea seabed exhibits an area of major glacial erosion exposing parts of the old hydrocarbon basins. In this region, we modelled the gas hydrate stability field in a 3D perspective, including the effects of higher order hydrocarbon gases. We used 3D seismic data to analyse the linkage between fluid-flow expressions and hydrate occurrences above old sedimentary basin systems and vertical faults. Pockmarks showed a relation to fault systems where some of them are directly connected to hydrocarbon bearing sedimentary formations. The influence of bottom water temperature, pore water salinity and geothermal gradient variation on gas hydrate stability zone (GHSZ) thickness is critically analysed in relation to both geological formations and salt tectonics. Our analysis suggests a highly variable GHSZ in the Barents Sea region controlled by local variations in the parameters of stability conditions. Recovery of gas-hydrate sample from the region and presence of gas-enhanced reflections below estimated BSR depths may indicate a prevalent gas-hydrate stable condition. 相似文献
14.
珠江口盆地神狐海域是天然气水合物钻探和试验开采的重点区域,大量钻探取心、测井与地震等综合分析表明不同站位水合物的饱和度、厚度与气源条件存在差异。本文利用天然气水合物调查及深水油气勘探所采集的测井和地震资料建立地质模型,利用PetroMod软件模拟地层的温度场、有机质成熟度、烃源岩生烃量、流体运移路径以及不同烃源岩影响下的水合物饱和度,结果表明:生物成因气分布在海底以下1500 m范围内的有机质未成熟地层,而热成因气分布在深度超过2300 m的成熟、过成熟地层。水合物稳定带内生烃量难以形成水合物,形成水合物气源主要来自于稳定带下方向上运移的生物与热成因气。模拟结果与测井结果对比分析表明,稳定带下部生物成因气能形成的水合物饱和度约为10%,在峡谷脊部的局部区域饱和度较高;相对高饱和度(>40%)水合物形成与文昌组、恩平组的热成因气沿断裂、气烟囱等流体运移通道幕式释放密切相关,W19井形成较高饱和度水合物的甲烷气体中热成因气占比达80%,W17井热成因气占比为73%,而SH2井主要以生物成因为主,因此,不同站位甲烷气体来源占比不同。 相似文献
15.
Irina Popescu Gilles Lericolais Nicolae Panin Marc De Batist Hervé Gillet 《Geo-Marine Letters》2007,27(2-4):173-183
This study is a synthesis of gas-related features in recent sediments across the western Black Sea basin. The investigation
is based on an extensive seismic dataset, and integrates published information from previous local studies. Our data reveal
widespread occurrences of seismic facies indicating free gas in sediments and gas escape in the water column. The presence
of gas hydrates is inferred from bottom-simulating reflections (BSRs). The distribution of the gas facies shows (1) major
gas accumulations close to the seafloor in the coastal area and along the shelfbreak, (2) ubiquitous gas migration from the
deeper subsurface on the shelf and (3) gas hydrate occurrences on the lower slope (below 750 m water depth). The coastal and
shelfbreak shallow gas areas correspond to the highstand and lowstand depocentres, respectively. Gas in these areas most likely
results from in situ degradation of biogenic methane, probably with a contribution of deep gas in the shelfbreak accumulation.
On the western shelf, vertical gas migration appears to originate from a source of Eocene age or older and, in some cases,
it is clearly related to known deep oil and gas fields. Gas release at the seafloor is abundant at water depths shallower
than 725 m, which corresponds to the minimum theoretical depth for methane hydrate stability, but occurs only exceptionally
at water depths where hydrates can form. As such, gas entering the hydrate stability field appears to form hydrates, acting
as a buffer for gas migration towards the seafloor and subsequent escape. 相似文献
16.
2015~2016年在神狐新钻探区钻遇大量水合物岩心，证实南海北部神狐新钻探区具有较好的水合物成藏环境和勘探前景。结合2008~2009年该区采集的地震资料，我们对晚中新世以来细粒峡谷的沉积特征及其相应的水合物成藏模式进行了分析。通过对大量地震剖面进行解释，发现该区峡谷两侧的隆起上发育大量的滑塌体。本文通过岩心粒度分析，地震相识别分析和水合物测井响应分析等手段综合识别出对水合物成藏有控制作用的三种类型的滑塌体：原生滑塌体、峡谷切割滑塌体、和同生断裂滑塌体。结合沉积速率、流体流速分析和峡谷迁移等沉积学要素对滑塌体成因进行分析，认为峡谷切割滑塌体由于后期峡谷迁移对前期滑塌体切割形成的、同生断裂滑塌体是由于隆起区基底不平引起差异性沉降而形成的。不同类型的滑塌体发育位置不同：原生滑塌体常发育在隆起中坡度较缓的区域、峡谷切割成因滑塌体常发育在不定向迁移的峡谷两侧、同生断裂滑塌体常发育在隆起中坡度起伏较大的区域。三种类型滑塌及其相应的水合物成藏模式不同，其中原生滑塌体有利于水合物成藏，而另外两种类型的滑塌体由于其不能对自由气进行有效封堵而不利于水合物成藏。根据三种滑塌体对水合物成藏的响应指出在粗粒的含有孔虫粉砂岩储层上，覆盖细粒的泥岩对自由气进行封堵有利于水合物成藏，并且多层的泥岩覆盖是造成水合物稳定带中水合物多个分层成矿现象出现的原因。 相似文献
17.
《Marine and Petroleum Geology》2012,35(1):62-71
High-quality logging-while-drilling (LWD) downhole logs were acquired in seven wells drilled during the Gulf of Mexico Gas Hydrate Joint Industry Project Leg II in the spring of 2009. Well logs obtained in one of the wells, the Green Canyon Block 955 H well (GC955-H), indicate that a 27.4-m thick zone at the depth of 428 m below sea floor (mbsf; 1404 feet below sea floor (fbsf)) contains gas hydrate within sand with average gas hydrate saturations estimated at 60% from the compressional-wave (P-wave) velocity and 65% (locally more than 80%) from resistivity logs if the gas hydrate is assumed to be uniformly distributed in this mostly sand-rich section. Similar analysis, however, of log data from a shallow clay-rich interval between 183 and 366 mbsf (600 and 1200 fbsf) yielded average gas hydrate saturations of about 20% from the resistivity log (locally 50−60%) and negligible amounts of gas hydrate from the P-wave velocity logs. Differences in saturations estimated between resistivity and P-wave velocities within the upper clay-rich interval are caused by the nature of the gas hydrate occurrences. In the case of the shallow clay-rich interval, gas hydrate fills vertical (or high angle) fractures in rather than filling pore space in sands. In this study, isotropic and anisotropic resistivity and velocity models are used to analyze the occurrence of gas hydrate within both the clay-rich and sand dominated gas-hydrate-bearing reservoirs in the GC955-H well. 相似文献
18.
《Marine and Petroleum Geology》2012,35(1):111-118
Potential accumulations of gas hydrates in Alaminos Canyon Block 21 (AC21) in the Gulf of Mexico are thought to occur in a shallow sand-rich interval, stratigraphically separated from sources of free gas below the base of the gas hydrate stability zone (BGHSZ), by an intervening thick layer of clay- and silt-rich sediments. Availability of sufficient gas charge from depth, in addition to local biogenic sourcing is considered key to the formation of gas hydrates in the GHSZ. Implicitly, a detailed understanding of geometries associated with fault and fracture networks in relation to potential gas migration pathways can provide additional confidence that seismic amplitude anomalies are related to gas hydrate accumulations. Delineation of fault and fracture systems from high resolution seismic data in and below the gas hydrates stability zone (GHSZ) was performed using an automated algorithm—Ant Tracking. The capturing of small-scale detail has particular significance at AC21, revealing a pervasive network of typically small-extent discontinuities, indicative of fracturing, throughout this intervening clay- and silt-rich layer of mass-transport deposits (MTDs). Ant Tracking features appear to correlate, to some extent, with potential gas hydrate accumulations, supporting the concept that fracturing possibly provides migration pathways albeit via a tortuous, complex path. This study demonstrates that the Ant Tracking attribute, in conjunction with detailed seismic interpretation and analysis, can provide valuable evidence of potential gas migration pathways. 相似文献
19.
Michael Riedel 《Marine Geophysical Researches》2007,28(4):355-371
Two single-channel seismic (SCS) data sets collected in 2000 and 2005 were used for a four-dimensional (4D) time-lapse analysis
of an active cold vent (Bullseye Vent). The data set acquired in 2000 serves as a reference in the applied processing sequence.
The 4D processing sequence utilizes time- and phase-matching, gain adjustments and shaping filters to transform the 2005 data
set so that it is most comparable to the conditions under which the 2000 data were acquired. The cold vent is characterized
by seismic blanking, which is a result of the presence of gas hydrate in the subsurface either within coarser-grained turbidite
sands or in fractures, as well as free gas trapped in these fracture systems. The area of blanking was defined using the seismic
attributes instantaneous amplitude and similarity. Several areas were identified where blanking was reduced in 2005 relative
to 2000. But most of the centre of Bullseye Vent and the area around it were seen to be characterized by intensified blanking
in 2005. Tracing these areas of intensified blanking through the three-dimensional (3D) seismic volume defined several apparent
new flow pathways that were not seen in the 2000 data, which are interpreted as newly generated fractures/faults for upward
fluid migration. Intensified blanking is interpreted as a result of new formation of gas hydrate in the subsurface along new
fracture pathways. Areas with reduced blanking may be zones where formerly plugged fractures that had trapped some free gas
may have been opened and free gas was liberated. 相似文献
20.
Bin Liu Jiangxin Chen Luis M. Pinheiro Li Yang Shengxuan Liu Yongxian Guan Haibin Song Nengyou Wu Huaning Xu Rui Yang 《海洋学报(英文版)》2021,40(2):136-146
Previous studies of gas hydrate in the Dongsha area mainly focused on the deep-seated gas hydrates that have a high energy potential, but cared little about the shallow gas hydrates occurrences. Shallow gas hydrates have been confirmed by drill cores at three sites(GMGS2 08, GMGS2 09 and GMGS2 16) during the GMGS2 cruise, which occur as veins, blocky nodules or massive layers, at 8–30 m below the seafloor. Gas chimneys and faults observed on the seismic sections are the two main fluid migration pathways. The deep-seated gas hydrate and the shallow hydrate-bearing sediments are two main seals for the migrating gas. The occurrences of shallow gas hydrates are mainly controlled by the migration of fluid along shallow faults and the presence of deep-seated gas hydrates.Active gas leakage is taking place at a relatively high-flux state through the vent structures identified on the geophysical data at the seafloor, although without resulting in gas plumes easily detectable by acoustic methods.The presence of strong reflections on the high-resolution seismic profiles and dim or chaotic layers in the subbottom profiles are most likely good indicators of shallow gas hydrates in the Dongsha area. Active cold seeps,indicated by either gas plume or seepage vent, can also be used as indicators for neighboring shallow gas hydrates and the gas hydrate system that is highly dynamic in the Dongsha area. 相似文献