共查询到20条相似文献，搜索用时 31 毫秒
1.
在有限数据条件下,可靠度敏感性分析是研究各种不确定性因素对边坡失稳概率影响规律的重要途径。基于直接蒙特卡洛模拟和概率密度加权分析方法提出了一种高效边坡稳定可靠度敏感性分析方法。所提出的方法通过随机场表征岩土体参数的空间变异性,并采用局部平均理论建立岩土体参数的缩维概率密度函数,用于概率密度加权分析中高效、准确地计算不同敏感性分析方案对应的边坡失稳概率。最后,通过一个工程案例--詹姆斯湾堤坝说明了所提出方法的有效性和准确性。结果表明：在敏感性分析过程中,所提出的方法只需要执行一次直接蒙特卡洛模拟,避免了针对不同敏感性分析方案重新产生随机样本和执行边坡稳定分析,节约了大量的计算时间和计算资源,显著提高了基于蒙特卡洛模拟的敏感性分析计算效率;在概率密度加权分析中采用岩土体参数的缩维概率密度函数能够准确地计算边坡失稳概率,避免了有偏估计,使概率密度加权分析方法适用于考虑空间变异性条件下的边坡稳定可靠度敏感性分析问题。 相似文献
2.
Jinsong Huang Gordon Fenton D. V. Griffiths Dianqinq Li Chuangbing Zhou 《Landslides》2017,14(2):491-498
The random finite element method (RFEM) combines the random field theory and finite element method in the framework of Monte Carlo simulation. It has been applied to a wide range of geotechnical problems such as slope stability, bearing capacity and the consolidation of soft soils. When the RFEM was first developed, direct Monte Carlo simulation was used. If the probability of failure (p f ) is small, the direct Monte Carlo simulation requires a large number of simulations. Subset simulation is one of most efficient variance reduction techniques for the simulation of small p f . It has been recently proposed to use subset simulation instead of direct Monte Carlo simulation in RFEM. It is noted, however, that subset simulation requires calculation of the factor of safety (FS), while direct Monte Carlo requires only the examination of failure or non-failure. The search for the FS in RFEM could be a tedious task. For example, the search for the FS of slope stability by the strength reduction method (SRM) usually requires much more computational time than a failure or non-failure checking. In this paper, the subset simulation is combined with RFEM, but the need for the search of FS is eliminated. The value of yield function in an elastoplastic finite element analysis is used to measure the safety margin instead of the FS. Numerical experiments show that the proposed approach gives the same level of accuracy as the traditional subset simulation based on FS, but the computational time is significantly reduced. Although only examples of slope stability are given, the proposed approach will generally work for other types of geotechnical applications. 相似文献
3.
约束随机场下的边坡可靠度随机有限元分析方法 总被引：2，自引：1，他引：1
目前边坡可靠度中常用的简化分析方法,不考虑边坡土体的空间变异性,每次计算整个边坡都取用相同的强度参数,由离散点试样试验得到的土体参数统计特性只能反映点特性,而边坡的稳定性受滑面上平均抗剪强度特性控制,因此,需要考虑空间范围内的平均特性。描述空间变异性的随机场理论对变异性较高的土体,实际上高估了其空间变异性。把随机场理论和地质统计中的区域化变量理论结合起来,建立约束随机场,并在此基础上进行Monte-Carlo随机有限元分析。计算实例表明,在高变异性条件下约束随机场能有效降低完全随机场的模拟方差,得到更低的破坏概率。对比了随机有限元和简化法的计算结果表明,简化法在土体强度变异性很高时其结果并非偏于保守。另外也指出了可靠度分析中存在的边坡尺度效应和简化法的适用条件。 相似文献
4.
Correlated random variables are commonly involved in probabilistic slope stability analysis, such as reliability analysis of slopes with spatially variable soil properties. This paper proposes a simple Correlated Sampling Technique (CST) for generating samples of correlated random variables. The CST firstly produces correlated standard-normally distributed samples through linear combinations of independent standard-normally distributed samples. Correlated arbitrarily distributed samples can then be obtained by the Nataf transformation. The CST was combined with FOSM (named CST-based FOSM) for probabilistic slope stability analysis. The slope reliabilities of a single-layered cohesive soil slope and a high earth and rockfill dam were analyzed to illustrate the CST-based FOSM. These illustrative examples indicated that the CST-based FOSM can accurately estimate the slope reliability indices with considerably fewer simulations (especially in the case of low failure probability) compared with direct MCS, and the slope reliability was sensitive to the correlation of the strength parameters. 相似文献
5.
吴道荣 《中国地质灾害与防治学报》2007,18(3):108-111
以国内广泛使用的传递系数法的平衡方程为基础,运用"国际结构安全度联合委员会(JCSS)"推荐的验算点法建立边坡工程可靠度分析模型,分别分析了某边坡基于随机变量模型和随机场模型时的边坡稳定性可靠度和破坏概率。计算结果表明,用随机变量模型计算出的破坏概率明显偏大,采用随机场模型比较符合实际情况。本例采用随机场模型计算时,方差折减系数可取0.5。 相似文献
6.
《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》2013,7(3-4):207-217
The present study comprises Monte-Carlo simulation assisted analysis of foundations resting on reinforced earth beds using the concept of beams on an elastic foundation, treating the modulus of subgrade reaction (MSR) as a stationary stochastic field characterised by mean, variance, autocorrelation function (ACF) and the autocorrelation distance (ACD). Realisations of the MSR, generated by solving a stochastic differential equation, are fed to a deterministic distributed parameter model to generate realisations of two dependent stochastic fields, namely deflection and bending moment in the foundation beam, and two random variables, namely the location of occurrence of maximum deflection and the bending moment. Subsequently these realisations are analysed to evolve probability distribution functions, variance and ACF of the dependent stochastic fields and the random variables. It is revealed that the ACF of these fields is independent of the ACF of the MSR. Further, variance of deflection is found to increase as the ACD of the MSR increases, implying requirement of a larger factor of safety when random soils display low frequency (macro level) variations. On the other hand, variance of the bending moment is larger at smaller ACDs of the MSR, indicating that for bending moments a larger factor of safety is required when the random soils display high frequency (micro level) variations. 相似文献
7.
岩土工程现场勘察试验通常只能获得有限的试验数据,据此难以真实地量化土体参数的空间变异性。提出了考虑土体参数空间变异性的概率反演和边坡可靠度更新方法,基于室内和现场两种不同来源的试验数据概率反演空间变异参数统计特征和更新边坡可靠度水平,并给出了计算流程。此外为合理地描述土体参数先验信息,发展了不排水抗剪强度非平稳随机场模型。最后通过不排水饱和黏土边坡算例验证了提出方法的有效性,并探讨了试验数据和钻孔位置对边坡后验失效概率的影响。结果表明：提出方法实现了空间变异土体参数概率反演与边坡可靠度更新的一体化,基于有限的多源试验数据概率反演得到的土体参数均值与试验数据非常吻合,明显降低了对参数不确定性的估计,更新的边坡可靠度水平显著增加。受土体参数空间自相关性的影响,试验数据对钻孔取样点附近区域土体参数统计特征更新的影响明显大于距离取样点较远区域。 相似文献
8.
In earth and environmental sciences applications, uncertainty analysis regarding the outputs of models whose parameters are spatially varying (or spatially distributed) is often performed in a Monte Carlo framework. In this context, alternative realizations of the spatial distribution of model inputs, typically conditioned to reproduce attribute values at locations where measurements are obtained, are generated via geostatistical simulation using simple random (SR) sampling. The environmental model under consideration is then evaluated using each of these realizations as a plausible input, in order to construct a distribution of plausible model outputs for uncertainty analysis purposes. In hydrogeological investigations, for example, conditional simulations of saturated hydraulic conductivity are used as input to physically-based simulators of flow and transport to evaluate the associated uncertainty in the spatial distribution of solute concentration. Realistic uncertainty analysis via SR sampling, however, requires a large number of simulated attribute realizations for the model inputs in order to yield a representative distribution of model outputs; this often hinders the application of uncertainty analysis due to the computational expense of evaluating complex environmental models. Stratified sampling methods, including variants of Latin hypercube sampling, constitute more efficient sampling aternatives, often resulting in a more representative distribution of model outputs (e.g., solute concentration) with fewer model input realizations (e.g., hydraulic conductivity), thus reducing the computational cost of uncertainty analysis. The application of stratified and Latin hypercube sampling in a geostatistical simulation context, however, is not widespread, and, apart from a few exceptions, has been limited to the unconditional simulation case. This paper proposes methodological modifications for adopting existing methods for stratified sampling (including Latin hypercube sampling), employed to date in an unconditional geostatistical simulation context, for the purpose of efficient conditional simulation of Gaussian random fields. The proposed conditional simulation methods are compared to traditional geostatistical simulation, based on SR sampling, in the context of a hydrogeological flow and transport model via a synthetic case study. The results indicate that stratified sampling methods (including Latin hypercube sampling) are more efficient than SR, overall reproducing to a similar extent statistics of the conductivity (and subsequently concentration) fields, yet with smaller sampling variability. These findings suggest that the proposed efficient conditional sampling methods could contribute to the wider application of uncertainty analysis in spatially distributed environmental models using geostatistical simulation. 相似文献
9.
This paper develops an analytical approach for reliability analysis of infinite slope stability in presence of spatially variable shear strength parameters. The analytical approach considers spatial autocorrelation of each parameter and cross-correlations between different parameters. It is robust, computational efficient and provides insight to the importance of spatial correlation scale on slope reliability analysis. This paper also explores the difference in continuous and discrete random fields and emphasizes the importance of fine discretization in relation to correlation scale. Finally, it shows that conditioning the stability analysis with information about trends and spatial data leads to reliability assessments with less uncertainty. 相似文献
10.
受工程勘察成本及试验场地限制,可获得的试验数据通常有限,基于有限的试验数据难以准确估计岩土参数统计特征和边坡可靠度。贝叶斯方法可以融合有限的场地信息降低对岩土参数不确定性的估计进而提高边坡可靠度水平。但是,目前的贝叶斯更新研究大多假定参数先验概率分布为正态、对数正态和均匀分布,似然函数为多维正态分布,这种做法的合理性有待进一步验证。总结了岩土工程贝叶斯分析常用的参数先验概率分布及似然函数模型,以一个不排水黏土边坡为例,采用自适应贝叶斯更新方法系统探讨了参数先验概率分布和似然函数对空间变异边坡参数后验概率分布推断及可靠度更新的影响。计算结果表明：参数先验概率分布对空间变异边坡参数后验概率分布推断及可靠度更新均有一定的影响,选用对数正态和极值I型分布作为先验概率分布推断的参数后验概率分布离散性较小。选用Beta分布和极值I型分布获得的边坡可靠度计算结果分别偏于保守和危险,选用对数正态分布获得的边坡可靠度计算结果居中。相比之下,似然函数的影响更加显著。与其他类型似然函数相比,由多维联合正态分布构建的似然函数可在降低对岩土参数不确定性估计的同时,获得与场地信息更为吻合的计算结果。另外,构建似然函数时不同位置处测量误差之间的自相关性对边坡后验失效概率也具有一定的影响。 相似文献
11.
边坡可靠度分析中通常假定采用平稳或准平稳随机场表征土体参数的空间变异性,然而大量现场试验数据表明,土体参数如不排水抗剪强度沿土体埋深常呈现明显的非平稳分布特征,即其均值和标准差均随埋深发生变化,因此亟需发展土体参数非平稳随机场模型及其模拟方法。针对目前不能有效单独模拟土体参数趋势分量和随机波动分量的不确定性,提出了一种有效的不排水抗剪强度参数非平稳随机场模型,并给出了土体参数二维非平稳随机场模拟方法计算流程,同时将新提出的模型与现有非平稳随机场模型及平稳随机场模型进行了系统比较。最后通过不排水饱和黏土边坡算例验证了提出模型的有效性,并揭示了不排水抗剪强度非平稳分布特征对边坡可靠度的影响规律。结果表明：提出模型能够有效地单独模拟土体参数趋势分量和随机波动分量的不确定性,考虑土体参数均值和标准差随埋深增加而增大的特性,可为表征土体参数非平稳分布特征提供了一条有效的途径。此外,与采用非平稳随机场模拟土体参数空间变异性相比,采用常用的平稳随机场模型会低估边坡失效概率,从而造成偏危险的边坡工程设计方案。 相似文献
12.
Ji Yuan Iason Papaioannou Daniel Straub 《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》2019,13(1):20-33
Rainfall-induced landslides occur during or immediately after rainfall events in which the pore water pressure builds up, leading to shallow slope failure. Thereby, low permeability layers result in high gradients in pore water pressure. The spatial variability of the soil permeability influences the probability such low permeability layers, and hence the probability of slope failure. In this paper, we investigate the influence of the vertical variability of soil permeability on the slope reliability, accounting for the randomness of rainfall processes. We model the saturated hydraulic conductivity of the soil with a one-dimensional random field. The random rainfall events are characterised by their duration and intensity and are modelled through self-similar random processes. The transient infiltration process is represented by Richards equation, which is evaluated numerically. The reliability analysis of the infinite slope is based on the factor of safety concept for evaluating slope stability. To cope with the large number of random variables arising from the discretization of the random field and the rainfall process, we evaluate the slope reliability through Subset Simulation, which is an adaptive Monte Carlo method known to be especially efficient for reliability analysis of such high-dimensional problems. Numerical investigations show higher probability of slope failure with increased spatial variability of the saturated hydraulic conductivity and with more uniform rainfall patterns. 相似文献
13.
Jing-Sen Cai Tian-Chyi Jim Yeh E-Chuan Yan Rui-Xuan Tang Jet-Chau Wen Shao-Yang Huang 《Landslides》2018,15(6):1193-1204
An adaptive sampling approach is proposed, which can sample spatially varying shear strength parameters efficiently to reduce uncertainty in the slope stability analysis. This approach employs a limit equilibrium model and stochastic conditional methodology to determine the likely sampling locations. Karhunen-Loève expansion is used to conduct the conditional Monte Carlo simulation. A first-order analysis is also proposed to ease the computational burden associated with Monte Carlo simulation. These approaches are then tested using borehole data from a field site. Results indicate that the proposed adaptive sampling approach is an effective and efficient sampling scheme for reducing uncertainty in slope stability analysis. 相似文献
14.
This paper deals with slope reliability analysis incorporating two-dimensional spatial variation. Two methods, namely the method of autocorrelated slices and the method of interpolated autocorrelations, are proposed for this purpose. Investigations are carried out based on the limit equilibrium method of slices. First-order-reliability-method (FORM) is coupled with deterministic slope stability analysis using the constrained optimization approach. Systematic search for the probabilistic critical slip surface has been carried out in this study. It is shown that both methods work well in modeling 2-D spatial variation. The results of slope reliability analysis are validated by Monte Carlo simulations. Failure probabilities obtained by FORM agree well with simulation results. It is found that 2-D spatial variation significantly influences the reliability analysis, and that the reliability index is more sensitive to vertical autocorrelation distance than to horizontal autocorrelation distance. Based on this study, failure probability is found significantly overestimated when spatial variation is ignored. Finally, the possible use of the method of interpolated autocorrelations in a probabilistic finite element analysis is suggested. 相似文献
15.
提出了基于子集模拟的边坡风险评估的高效随机有限元法（RFEM）,推导了基于子集模拟的边坡失效概率和失效风险的计算公式,并给出了基于高效RFEM的边坡可靠度分析和风险评估流程图。采用一个边坡算例验证了所提方法的有效性。结果表明,基于子集模拟的高效RFEM可以视为是对基于蒙特卡洛模拟的传统RFEM的改进,显著地提高了失效概率和失效风险的计算效率以及失效样本的产生能力,非常适用于分析小失效概率的可靠度问题,极大地增强了RFEM在边坡可靠度分析和风险评估中的实用性。高效RFEM将边坡的整体失效风险分解为对应不同概率水平的边坡失效风险,并量化了它们对整体风险的相对贡献度。在该方法中,边坡可靠度分析和风险评估与确定性边坡有限元分析互不耦合,极大地简化了它们的计算过程。此外,土体不排水抗剪强度的竖向空间变异性对边坡失效风险具有显著的影响。 相似文献
16.
Two advanced Kriging metamodeling techniques were used to compute the failure probability of geotechnical structures involving spatially varying soil properties. These methods are based on a Kriging metamodel combined with a global sensitivity analysis that is called in literature Global Sensitivity Analysis-enhanced Surrogate (GSAS) modeling for reliability analysis. The GSAS methodology may be used in combination with either the Monte Carlo simulation (MCS) or importance sampling (IS) method. The resulting Kriging metamodeling techniques are called GSAS-MCS or GSAS-IS. The objective of these techniques is to reduce the number of calls of the mechanical model as compared with the classical Kriging-based metamodeling techniques (called AK-MCS and AK-IS) combining Kriging with MCS or IS. The soil uncertain parameters were assumed as non-Gaussian random fields. EOLE methodology was used to discretize these random fields. The mechanical models were based on numerical simulations. Some probabilistic numerical results are presented and discussed. 相似文献
17.
The failure probability of geotechnical structures with spatially varying soil properties is generally computed using Monte Carlo simulation (MCS) methodology. This approach is well known to be very time-consuming when dealing with small failure probabilities. One alternative to MCS is the subset simulation approach. This approach was mainly used in the literature in cases where the uncertain parameters are modelled by random variables. In this article, it is employed in the case where the uncertain parameters are modelled by random fields. This is illustrated through the probabilistic analysis at the serviceability limit state (SLS) of a strip footing resting on a soil with a spatially varying Young's modulus. The probabilistic numerical results have shown that the probability of exceeding a tolerable vertical displacement (P e) calculated by subset simulation is very close to that computed by MCS methodology but with a significant reduction in the number of realisations. A parametric study to investigate the effect of the soil variability (coefficient of variation and the horizontal and vertical autocorrelation lengths of the Young's modulus) on P e was presented and discussed. Finally, a reliability-based design of strip footings was presented. It allows one to obtain the probabilistic footing breadth for a given soil variability. 相似文献
18.
Embankment slopes composed of spatially variable soils have a variety of different failure modes that are affected by the correlation distances of the material properties and the geometry and total length of the slope. This paper examines the reliability of soil slopes for embankments of different length and uses parallel computing to analyse very long embankments (up to 100 times the embankment height) for a clay soil characterised by a spatially varying undrained shear strength. Based on a series of analyses using the 3D random finite element method (RFEM), it is first shown that the reliability of slopes of various length can be efficiently computed by combining simple probability theory with a detailed 3D RFEM analysis of a representative shorter slope of length 10 times the slope height. RFEM predictions of reliability indices for longer slopes are then compared with results obtained using Vanmarcke's (1977a) simplified 3D method and Calle's (1985) extended 2D approach. It is shown that these methods can give significantly different results, depending on the horizontal scale of fluctuation relative to the slope length, with RFEM predicting a lower slope reliability than the Vanmarcke and Calle solutions in all cases. The differences in the solutions are evaluated and attributed to differences in the assumed and computed failure surface geometries. 相似文献
19.
基于饱和渗透系数空间变异结构的斜坡渗流及失稳特征 总被引：1，自引：0，他引：1
以往研究一般采用单随机变量方法（SRV）或基于水平或垂直方向波动范围生成的空间变异随机场来模拟岩土参数的空间变异性,对具有倾斜定向特征的空间变异随机场未有涉及.基于条件模拟相关理论和非侵入式随机有限元的理论框架,提出了利用序贯高斯模拟方法进行斜坡参数条件随机场模拟并运用有限元方法进行斜坡渗流和稳定性分析的方法.针对理想边坡,对各向同性和几何各向异性的共7种空间变异结构的饱和渗透系数（Ks）各进行了200次条件随机场模拟,基于条件随机场模拟结果进行了有限元渗流和稳定性计算,对每种空间变异结构多次计算结果进行了统计分析.结果表明:本文所提出的方法不仅再现了研究区域参数的空间二阶统计特性,通过设定变异函数参数进行不同空间变异类型、变异程度、变异定向性的随机场模拟,同时利用现场观测数据对随机场模拟结果进行条件限制,从而提高了随机场的赋值精度;Ks的空间变异结构对孔隙水压力的分布规律、地下水位线变化范围、稳定性系数和最危险滑动面分布特征均有一定程度的影响.本研究为库岸斜坡稳定性评价提供方法支撑. 相似文献
20.
The sparse polynomial chaos expansion is employed to perform a probabilistic analysis of the tunnel face stability in the spatially random soils. A shield tunnel under compressed air is considered which implies that the applied pressure is uniformly distributed on the tunnel face. Two sets of failure mechanisms in the context of the limit analysis theory with respect to the frictional and the purely cohesive soils are used to calculate the required face pressure. In the case of the frictional soils, the cohesion and the friction angle are modeled as two anisotropic cross-correlated lognormal random fields; for the purely cohesive soils, the cohesion and the unit weight are modeled as two anisotropic independent lognormal random fields. The influences of the spatial variability and of the cross-correlation between the cohesion and the friction angle on the probability density function of the required face pressure, on the sensitivity index and on the failure probability are discussed. The obtained results show that the spatial variability has an important influence on the probability density function as well as the failure probability, but it has a negligible impact on the Sobol’s index. 相似文献