共查询到20条相似文献，搜索用时 171 毫秒
1.
2.
位场反演计算的场比值法及在宽城地区磁异常解释中的应用 总被引：1，自引：1，他引：0
在磁异常的反演计算中, 为了避免由于选错了磁性体的形状而产生很大的误差, 前人已研究了多种所谓自动反演的计算方法。与传统的方法不同, 用这些方法, 可以同时确定磁性体的几何形状和埋藏深度等参数。但是前人研究的方法需要计算磁异常的三阶导数, 因此所受高频噪声干扰十分严重, 以至于影响到计算结果的可靠性。因此很难用到实际资料处理中。
本文提出的场比值法可以同时确定磁性体的形状和埋藏深度。场比值法通过场比值field-ratio来确定磁性体的形状, field-ratio的物理含义与Euler反褶积公式中的形状因子类似。场比值法的优点是在反演计算中只需要计算磁异常的一、二阶导数, 因此比前人的方法受高频随机干扰小, 可以用于实际资料的处理中。模型实验证明了场比值法的正确性, 在河北省宽城地区用场比值法对磁异常反演计算, 展示了方法的实用性。
关键词: 磁异常; 自动反演; 磁性体形状的判别 相似文献
3.
Sid-Ali Ouadfeul Mohamed Hamoudi Leila Aliouane Said Eladj 《Arabian Journal of Geosciences》2013,6(6):1669-1680
In this paper, we have analyzed the geomagnetic anomaly field reduced to the pole by the 2D directional continuous wavelet transform (DCWT). The objective is to identify geological contacts. The proposed idea has been applied firstly at a synthetic model, the obtained results showed the robustness of the proposed technique, after that the synthetic data has been noised; analysis shows that contacts identified by DCWT are affected by noise. To resolve this problem, we have proposed an algorithm to reduce the noise effect in the contacts model. Application on the real geomagnetic data of In Ouzzal area located in the West of Hoggar (Algeria) shows clearly the robustness of the proposed method. Comparison with the analytic signal solutions exhibits a difference between the two models of contacts. Our method gives results that are accurate with the structural geological map. 相似文献
4.
在粤北某铅锌矿矿区进行的直流激电测深工作中,通过修改激电测量数据格式,用RES2DINV软件进行反演,推测了3个矿体的产状。后经钻探验证,推测结果跟钻探揭露结果基本一致。 相似文献
5.
6.
7.
Computerization of Rock Engineering Systems Using Neural Networks with an Expert System 总被引：7，自引：1，他引：6
Summary With the Rock Engineering Systems (RES) methodology, rock mechanics and rock engineering problems are studied systematically
using a total systems approach, incorporating rock mass properties, interrelated parameters, complex interaction mechanisms
and dynamic behavioral modes. In this paper, a method of implementation and computerization of RES is considered, using neural
networks together with an expert system. The computerized RES starts with the data processing of rock mass properties and
boundary conditions and data base management of rock engineering case records. This step is followed by building and operating
parameter interaction matrices with the combined use of backpropagation networks and an expert system. Finally, a simulator
for modelling the dynamic process of rock engineering systems using the Hopfield network is incorporated. With the aid of
neural networks' learning capability and expert system's symbol-reasoning capability, the RES approach is implemented in an
“intelligent” mode. 相似文献
8.
为了提高使用重力数据推断断裂构造的有效性,先以"田"字形小子域滤波法突出重力梯级带异常,再分别联合水平总梯度模、解析信号振幅及水平方向导数进行二次处理.通过理论模型试验,比较单方法及不同组合方法的处理效果,并将组合方法应用到金羊盆地实测重力数据的处理中,推断研究区的断裂构造格架.与地震剖面划分的断裂进行比对,证明了利用组合方法划分断裂构造的有效性.研究结果表明,已有断裂构造识别方法的组合应用能够更清晰地刻画地质体的边界,在应用重力数据推断断裂构造方面具有非常好的实用性. 相似文献
9.
解析信号本质上是一种全通滤波器,由于其不受人为因素干扰,能够较好地反映原始信号包含的信息特征。该方法不仅是对非平稳信号进行分析的有效方法,也是检测信号局部特征的有力工具。本文通过对实信号的解析信号处理得到复信号,由该复信号的振幅,能清晰地刻画信号能量空间分布特征。模型试验表明,解析信号振幅方法减小了常规化极方法在勘探程度较低的地区引起假异常的问题,使地下磁性体与振幅中心位置对应。尤其在低纬度或地形切割较大的地区,该方法更具优势。将该方法应用于老挝爬立山铁矿区实测磁异常的分析,由此圈定了磁铁矿分布位置,并由区内56个钻孔证实该推断的可靠性。 相似文献
10.
串联去噪技术在金属矿地震勘探中的应用 总被引：1，自引：0，他引：1
金属矿地震勘探中原始数据的信噪比很低,多种干扰混杂在记录中,常规去噪手段难以达到理想效果。针对金属矿地震数据中强线性干扰,设计了f-k 滤波、Radon 变换方法二级衰减; 针对强随机噪声,设计Radon 变换以及Curvelet 域组合变换法二级衰减,组成了f-k 滤波法、Radon 变换及Curvelet 域组合变换法串联去噪方法。应用于金昌金属矿多类混杂强噪声的地震实际数据中,大幅提高了数据的信噪比,经验证本文方法实用、有效。 相似文献
11.
12.
13.
微地震监测数据海量,给数据的长距离实时无线传输带来了很多困难,而且还占用很多磁盘空间。笔者首先采用自适应阈值的STA/LTA算法,选取合适的特征函数,从海量的监测数据中自动快速准确地识别微地震有效信号;然后准确确定有效信号的起止时间,完整地截取有效信号的波形数据,去除大量冗余数据,使得数据减少为原来的20%以下;最后再采用STEIM2算法对截取后的有效信号进行压缩,使监测数据的压缩比达到10∶1。研究结果表明:该方法能够通过去除冗余数据和无损压缩,大幅减少微地震监测数据的传输量,使得最终的数据仅为原数据的10%,从而减少了微地震监测数据的长距离无线实时传输困难,同时也减少数据存储所需要的磁盘空间,取得了较好的应用效果。 相似文献
14.
为更加清晰和准确地利用磁梯度数据获得地质体的分布特征,笔者采用解析信号总水平导数法和梯度欧拉反褶积技术组合实现磁梯度数据的解释,解析信号总水平导数的极值可有效地圈定出矿体的分布范围,梯度欧拉反褶积法可有效地避免背景异常的干扰,从而准确地给出磁性体的位置和深度信息。理论模型证明解析信号水平导数法和梯度欧拉反褶积法的组合可准确地获得磁性体的水平范围和深度。应用于河北迁安地区磁梯度数据的解释,圈定出5个呈条带状分布的较大型铁矿藏,埋深在200~450 m。 相似文献
15.
改进的局部波数法及其在磁场数据解释中的应用 总被引：1，自引：0，他引：1
局部波数法是一种进行磁场数据解释的常用方法。现有的局部波数法在进行反演时往往需要计算局部波数的导数,会明显地增大噪声的干扰,为解释结果带来误差。提出3种利用磁异常在不同位置或不同高度上局部波数的简单组合来进行场源体深度及构造指数的计算方法,不需要计算局部波数的导数,降低了噪声的干扰,增强了反演结果的稳定性。通过理论模型试验,证明改过的局部波数法在有无噪声的情况下均能很好地完成异常的反演,其反演结果与理论值之间的差距小于理论值的5%。将其应用于四川某地区磁异常的反演中,其结果与解析信号的欧拉反褶积法的反演结果吻合。 相似文献
16.
测井资料评价次生孔隙的方法、原理及实例 总被引：2，自引：0，他引：2
结合高邮凹陷地区实际地质情况,在地质、地震及岩芯分析的基础上,对次生孔隙的成因机制从测井角度进行了分析讨论。主要从以下几方面研究1)利用整个井段的声波测井资料可以识别成岩阶段,划分次生孔隙发育的起始层段;2)分析利用声波孔隙度与密度、中子孔隙度差值求取次生孔隙度的适用条件和范围,依条件的不同进行方法的选取;3)利用声波-电阻率幅度差法量化烃源岩中有机质含量,分析有机质经过热解后产生的有机酸对砂体产生的溶蚀作用,判断由此导致的次生孔隙发育请况;4)利用声波时差辨识异常高压层段,分析次生孔隙的发育和保存。以上方法经过实例验证,效果明显。 相似文献
17.
K. Alamdar 《Arabian Journal of Geosciences》2016,9(12):597
This paper presents an inversion method for the interpretation of 2D magnetic anomaly data, in which uses the enhanced local wavenumber function to estimate the depth and the nature (structural index) of an isolated magnetic source. However, the method is sensitive to noise. In order to lower the effect of noise, I applied upward continuation technique to smooth the anomaly. Tests on synthetic noise-free and noise-corrupted magnetic data show that the method can successfully estimate the depth and the nature of the causative source. The practical application of the technique is applied to measured magnetic anomaly data from Shavaz Iron Ore, center of Iran, and the inversion results are in agreement with the inversion results from Euler deconvolution of the analytic signal and exploratory drilling. 相似文献
18.
随着高精度地震勘探技术的发展,利用高保真的方法提高地震资料信噪比成为了去噪处理的关键。曲波域阈值法能够有效地压制随机噪声,但易产生伪吉布斯震荡现象,造成信号局部畸变,从而影响处理效果。针对这一问题,提出一种基于压缩感知理论（Compressing Sensing,简称CS）的地震信号去噪方法,该方法利用随机噪声和有效信号在曲波稀疏域稀疏表征的差异来分离随机噪声。其实现步骤为:将地震数据变换到曲波域;利用压缩感知理论和全变差正则化算法重构曲波系数;曲波逆变换得到压制噪声后的重构地震数据。理论模型和实际资料应用表明,该方法能够很好规避伪吉布斯现象带来的信号失真问题,进一步提高了资料的信噪比。 相似文献
19.
The effectiveness of inversion apparent resistivity data to determine accurately the true resistivity distribution over 2D structures has been investigated using a common inversion scheme based on smoothness-constrained nonlinear least-squares optimization with enhancing horizontal resolution (EHR) technique by numerical simulation. The theoretical model generates in RES2DMOD software at specific distance and depth using Wenner, Wenner–Schlumberger, and pole–dipole arrays were inverted. The inversion model was compared with the original 2D model in RES2DINV software. The study model includes horizontal layering, vertical resolution, and horizontal two layers with different resistivity. Also, the response to variations in data density of these arrays was investigated. The study shows the best array suitable to be used in the survey was chosen for real data acquisition at the actual site. Subsequently, the results from borehole were used to verify the results of 2D resistivity imaging method with and without EHR technique. Saturated zone (0–40 Ω-m) was found scattered at the depth of 10–20 m. The borehole is located at 63 m at 2D resistivity imaging survey which shows at depth 10–20 m is sandy silt. Highly weathered sandstone was found at 6 m depth with resistivity value of 800 Ω-m and SPT N value of 20. The bedrock was found at 27 m depth with resistivity value of 3,000 Ω-m and SPT N value of 50. The application of 2D resistivity imaging with EHR technique indicate the ability of the proposed approach in terms of density, depth, and resistivity value of anomalous and layer in a computationally and numerically efficient manner and to exhibit good performance in the data inversion. 相似文献
20.
B. S. Badmus O. D. Akinyemi J. A. Olowofela G. M. Folarin 《Journal of the Geological Society of India》2012,80(6):845-854
Geological structures are 3-Dimensional (3D) in nature, thus 1-Dimensional and 2-Dimensional surveys cannot adequately model them. However, sophisticated 3D survey equipment are very expensive. In this study, a singlechannel ABEM SAS 300B Terrameter was used to obtain 3D models of the subsurface. This survey was carried out at three different locations within Abeokuta, a basement complex terrain of southwestern Nigeria. The area falls within longitudes 3.35° and 3.38° East and latitudes 7.22° and 7.46° North respectively, with coordinates of 2550.0 m North and 1724.2 m East. A manual 4-electrode system was used in the Electrical Resistivity Tomography survey at the three locations. Each location was marked into 7 by 7 square grids with 1 m, 3 m and 5 m unit electrode spacings in succession. The pole-pole array was used with the two remote electrodes placed at distances of 23 m, 40 m and 65 m from the grids of 1 m, 3 m and 5 m unit electrode spacings respectively, to reduce their telluric effects on the measured apparent resistivity values. To reduce survey time consumption, the cross-diagonal survey method was adopted. The data obtained were analysed using a 3D inversion software called RES3DINV and 3-Dimensional models of the subsurface were also generated using Slicer Dicer graphics software. The study revealed layers extending to depths of 7.75 m, 23.2 m and 38.7 m for unit electrode spacings of 1 m, 3 m and 5 m respectively. It revealed resistivity values ranging from 7.3 Ωm to 300 Ωm for electrode spacing of 1.0 m; 13.8 Ωm to 200 Ωm for electrode spacing of 3 m and 3.9 Ωm to 200 Ωm for electrode spacing of 5 m at the first location. At the second location, it revealed resistivity values ranging from 0.53 Ωm to 120.0 Ωm for electrode spacing of 3 m and 0.30 Ωm to 100 Ωm for electrode spacing of 5 m. For electrode spacings of 1 m, 3 m and 5 m, resistivity values ranging from 6.1 Ωm to 600 Ωm, 12 Ωm to 600 Ωm and 0.85 Ωm to 1700 Ωm were obtained respectively at the third location. Generally, this study revealed lithologies composed of lateritic soil, sand, sandstone, sandyclay, clayeysand, weathered rock, fractured rock, clay and fresh basement; to a depth of about 39 m. Also, location 3 was discovered to have good groundwater prospects; though not as good as for locations 1 and 2. 相似文献