首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The authors recently determined seismic parameters of earthquakes located along a lineation of microearthquakes in the Coast Range Province of northern California (Dehlinger and Bolt, 1984). The lineation closely follows the mapped Bartlett Springs fault zone, which is considered to be the source of seismic activity. This fault strikes N40°W for about 40 km and the mapped fault zone consists of a 2–3 km-wide belt of melange. Earthquake hypocenters indicate that this belt dips steeply to the northeast, with shocks occurring along multiple dislocation planes that together extend downward to depths of about 12 km.Focal mechanisms and associated stress fields were determined for 22 of the best recorded recent shocks along the earthquake lineation. Analyses of these shocks provided a comparison between individually and jointly determined focal mechanisms and of the directions of the corresponding stress axes, for identical shocks along the entire fault length. Thirteen of the shocks exhibited right-lateral, San Andreas type of source motions. Average values of these 13 individually determined focal parameters are within the standard deviation of the same set of jointly determined values. It is thus verified that the probability model algorithm for joint parameters determinations developed by Brillinger et al. (1980) yields reliable values of focal parameters. Moreover, the jointly determined parameters appear to be more reliable than the average-determined ones. The focal mechanisms and associated stress fields along the entire length of the Bartlett Springs fault zone are consistent with shearing motions between the North American and Pacific lithospheric plates that produce displacements along the San Andreas transform fault.  相似文献   

2.
Large earthquakes in strike-slip regimes commonly rupture fault segments that are oblique to each other in both strike and dip. This was the case during the 1999 Izmit earthquake, which mainly ruptured E–W-striking right-lateral faults but also ruptured the N60°E-striking Karadere fault at the eastern end of the main rupture. It will also likely be so for any future large fault rupture in the adjacent Sea of Marmara. Our aim here is to characterize the effects of regional stress direction, stress triggering due to rupture, and mechanical slip interaction on the composite rupture process. We examine the failure tendency and slip mechanism on secondary faults that are oblique in strike and dip to a vertical strike-slip fault or “master” fault. For a regional stress field well-oriented for slip on a vertical right-lateral strike-slip fault, we determine that oblique normal faulting is most favored on dipping faults with two different strikes, both of which are oriented clockwise from the strike-slip fault. The orientation closer in strike to the master fault is predicted to slip with right-lateral oblique normal slip, the other one with left-lateral oblique normal slip. The most favored secondary fault orientations depend on the effective coefficient of friction on the faults and the ratio of the vertical stress to the maximum horizontal stress. If the regional stress instead causes left-lateral slip on the vertical master fault, the most favored secondary faults would be oriented counterclockwise from the master fault. For secondary faults striking ±30° oblique to the master fault, right-lateral slip on the master fault brings both these secondary fault orientations closer to the Coulomb condition for shear failure with oblique right-lateral slip. For a secondary fault striking 30° counterclockwise, the predicted stress change and the component of reverse slip both increase for shallower-angle dips of the secondary fault. For a secondary fault striking 30° clockwise, the predicted stress change decreases but the predicted component of normal slip increases for shallower-angle dips of the secondary fault. When both the vertical master fault and the dipping secondary fault are allowed to slip, mechanical interaction produces sharp gradients or discontinuities in slip across their intersection lines. This can effectively constrain rupture to limited portions of larger faults, depending on the locations of fault intersections. Across the fault intersection line, predicted rakes can vary by >40° and the sense of lateral slip can reverse. Application of these results provides a potential explanation for why only a limited portion of the Karadere fault ruptured during the Izmit earthquake. Our results also suggest that the geometries of fault intersection within the Sea of Marmara favor composite rupture of multiple oblique fault segments.  相似文献   

3.
The pattern of scarps developed during the earthquakes of October 2, 1915, in Pleasant Valley, Nevada, may have formed as a result of a modern stress system acting on a set of fractures produced by an earlier stress system which was oriented differently. Four major scarps developed in a right-stepping, en-echelon pattern suggestive of left-lateral slip across the zone and an extension axis oriented approximately S85°W. The trend of the zone is N25°E. However, the orientation of simple dip-slip on most segments trending approximately N20—40° E and a right-lateral component of displacement on several N- and NW-trending segments of the scarps indicate that the axis of regional extension was oriented between N50° and 70° W, normal to the zone.The cumulative length of the scarps is 60 km, average vertical displacement 2 m, and the maximum vertical displacement near the Pearce School site 5.8 m. Almost everywhere the 1915 scarps formed along an older scarp line, and in some places older scarps represent multiple previous events. The most recent displacement event prior to 1915 is interpreted to have occurred more than 6600 years ago, but possibly less than 20,000 years ago. Some faults expressed by older scarps that trend northwest were not reactivated in 1915, possibly because they are oriented at a low angle with respect to the axis of modern regional extension.The 1915 event occurred in an area of overlap of three regional fault trends oriented northwest, north, and northeast and referred to, respectively, as the Oregon—Nevada, Northwest Nevada, and Midas—Battle Moutain trends. Each of these trends may have developed at a different time; the Oregon—Nevada trend was possibly the earliest and developed in Late Miocene time (Stewart et al. 1975). Segments of the 1915 scarps are parallel to each of these trends, suggesting influence by older sets of fractures.  相似文献   

4.
Many stable continental regions have subregions with poorly defined earthquake hazards. Analysis of minor structures (folds and faults) in these subregions can improve our understanding of the tectonics and earthquake hazards. Detailed structural mapping in Pottawatomie County has revealed a suite consisting of two uplifted blocks aligned along a northeast trend and surrounded by faults. The first uplift is located southwest of the second. The northwest and southeast sides of these uplifts are bounded by northeast-trending right-lateral faults. To the east, both uplifts are bounded by north-trending reverse faults, and the first uplift is bounded by a north-trending high-angle fault to the west. The structural suite occurs above a basement fault that is part of a series of north–northeast-trending faults that delineate the Humboldt Fault Zone of eastern Kansas, an integral part of the Midcontinent Rift System. The favored kinematic model is a contractional stepover (push-up) between echelon strike-slip faults. Mechanical modeling using the boundary element method supports the interpretation of the uplifts as contractional stepovers and indicates that an approximately east–northeast maximum compressive stress trajectory is responsible for the formation of the structural suite. This stress trajectory suggests potential activity during the Laramide Orogeny, which agrees with the age of kimberlite emplacement in adjacent Riley County. The current stress field in Kansas has a N85°W maximum compressive stress trajectory that could potentially produce earthquakes along the basement faults. Several epicenters of seismic events (<M2.0) are located within 10 km of the structural suite. One epicenter is coincident with the northwest boundary of the uplift. This structural suite, a contractional stepover between echelon northeast-trending right-lateral faults, is similar to that mapped in the New Madrid Seismic Zone, and both areas currently feature roughly east–west maximum compressive stress trajectory. Based on these similarities, the faults in Pottawatomie County have the potential for seismicity. The results demonstrate that mechanical analysis of minor structural features can improve our knowledge of local earthquake hazards.  相似文献   

5.
Southern Okinawa Trough represents an early stage of back-arc rifting and is characterized by normal faulting and microearthquakes. Earthquake distribution and deep structure of fault was investigated to clarify active rifting in the southern Okinawa Trough, where two parallel grabens are located. A network of ocean bottom seismometers (OBSs) that displayed the hypocenters of 105 earthquakes were observed for a period of 4 days in southern-graben (SG). Most of the microearthquakes occurred in a cluster about 7 km wide, which on a cross-section striking N45°E dips 48° to the southwest. Relocated hypocenters, which are recorded by a local seismic network, show scattered distribution around the southern-graben. There are no remarkable surface faults in the southern-graben. On the other hand, the recalculation of hypocenter locations of 1996 earthquakes swarm recorded by a local seismic network suggests that the swarm is associated with normal faulting on the southern side of northern-graben (NG). Thus, the undeveloped southern-graben is located to the south of the developed northern-graben. Southward migration of rifting, which may be caused by migration of volcanism, could thus be occurring in the southern Okinawa Trough. The extension rate computed for the southern Okinawa Trough from the fault model of the northern-graben is 4.6 cm/year, which is 59–102% of the extension rate (GPS measurements). This result indicates that the majority of extensional deformation is concentrated within the center of the northern-graben in the Okinawa Trough.  相似文献   

6.
王兆国  刘财  冯晅  秦树洪 《世界地质》2009,28(4):513-519
中国东北地区在北东东向应力场控制下, 地震有其特殊性。地震空间分布和深度统计结果表明, 东北地区地震主要受岩石圈断裂(开原-赤峰断裂带) 控制, 以44°N为界, 南北具有明显差异。北部地震发生的数量少于南部, 震源深度主要集中在4～6 km和8～12 km两个深度范围内; 而南部主要集中在8～12 km和28～30 km两个深度范围内。发震深度分析显示, 开原-赤峰、郯庐断裂带、大兴安岭断裂带下可能存在地温较低的区域, 使地震可以在深部孕育。地震分布的Vp和Vs剖面资料的研究暗示, 断裂与速度变化带、断裂与断裂的相交区域是地震易发生区域。  相似文献   

7.
New elements on the seismicity of Portugal and new focal-mechanism solutions of earthquakes with epicentres situated off the coast of the Portuguese mainland and in the Azores region are presented. Historical seismicity data show that in the territory of the Portuguese mainland there are active faults that are responsible for earthquakes that have caused important damage and many casualties. However, most of the intraplate earthquakes with epicentres situated in the Portuguese mainland or near the shore are normally of small magnitude and this renders difficult their interpretation in the light of focal mechanisms. A solution for one earthquake, with magnitude 5 and epicentre at the Nazaré submarine canyon, is presented.Southwestwards of Cape St. Vincent there is an important seismic zone responsible for high-magnitude earthquakes such as that of 1 November 1755. This zone is situated in the region where the extension of the Messejana fault into the ocean joins with the Azores-Gibraltar fault.The seismicity of the area situated between the western coast of the Portuguese mainland and the Azores increases approximately along the 15°W meridian, from the latitude of the Azores-Gibraltar fault up to 44°N. Focal mechanisms of earthquakes with epicentres situated along this line show very similar solutions.The interpretation of the focal mechanism solutions of the earthquakes with epicentres situated in the studied area shows that the stress field trends approximately NW-SE. It is assumed that this stress field results from the interaction of the Eurasian and African plates; however, this direction is not maintained in the Azores region.  相似文献   

8.
Focal mechanisms for three recent earthquakes in Finland are determined using P-wave polarities together with SV/P and SH/P phase amplitude ratios. The events occurred on May 11, 2000 in Toivakka, Central Finland (ML=2.4), on September 15, 2000 in Kuusamo, northeastern Finland (ML=3.5), and on May 2, 2001 in Kolari, western Finnish Lapland (ML=2.9).In order to obtain reliable estimates of the source parameters, one-dimensional crust and upper mantle velocity models are derived for the epicenter areas from deep-seismic sounding results. The starting models are modified by one-dimensional ray tracing using the earthquake observations. The events are relocated by employing P- and S-phase arrival times from the nearest seismic stations and the final velocity models. Synthetic waveforms, calculated with the reflectivity method, are used to further constrain and verify the source and structural parameters.The Toivakka earthquake indicates thrust- or reverse-faulting mechanism at a depth of 5 km. After comparison with aeromagnetic and topographic data we suggest the eastward dipping nodal plane (358°/42°) was the fault plane. The best-fitting fault plane solution of the Kolari earthquake suggests pure thrust-faulting at a depth of 5 km. The nodal plane striking 035°/30° correlates well with surface observations of the postglacial, possibly listric fault systems in the source area. The Kuusamo earthquake (focal depth 14 km) has a normal-faulting mechanism with the nodal planes trending 133°/47° or 284°/47°. Preference is given to the SW-dipping nodal plane, as it seems to coincide with topographic and magnetic lineament directions that have been active after the last ice age.The three earthquakes have occurred in old Precambrian faults and shear zones, which have been reactivated. The reactivated faults are favourably oriented in the local stress field.  相似文献   

9.
In the southern South–North Seismic Zone, China, seismic activity in the Yingjiang area of western Yunnan increased from December 2010, and eventually a destructive earthquake of Ms5.9 occurred near Yingjiang town on 10 March 2011. The focal mechanism and hypocenter location of the mainshock suggest that the Dayingjiang Fault was the site of the mainshock rupture. However, most of foreshocks and all aftershocks recorded by a portable seismic array located close to the mainshock occurred along the N–S-striking Sudian Fault, indicating that this fault had an important influence on these shocks. Coulomb stress calculations show that three strong(magnitude ≥5.0) earthquakes that occurred in the study region in 2008 increased the coulomb stress along the plane parallel to the Dayingjiang Fault. This supports the Dayingjiang Fault, and not the Sudian Fault, as the seismogenic fault of the 2011 Ms5.9 Yingjiang earthquake. The strong earthquakes in 2008 also increased the Coulomb stress at depths of ≤5 km along the entire Sudian Fault, and by doing so increased the shallow seismic activity along the fault. This explains why the foreshocks and aftershocks of the 2011 Yingjiang earthquake were located mostly on the Sudian Fault where it cuts the shallow crust. The earthquakes at the intersection of the Sudian and Dayingjiang faults are distributed mainly along a belt that dips to the southeast at ~40°, suggesting that the Dayingjiang Fault in the mainshock area also dips to the southeast at ~40°.  相似文献   

10.
We describe and compare the two transform zones that connect the Icelandic rift segments and the mid-Atlantic Ridge close to the Icelandic hot spot, in terms of geometry of faulting and stress fields. The E–W trending South Iceland Seismic Zone is a diffuse shear zone with a Riedel fault pattern including N0°–N20°E trending right-lateral and N60°–N70°E trending left-lateral faults. The dominant stress field in this zone is characterised by NW–SE extension, in general agreement with left-lateral transform motion. The Tjörnes Fracture Zone includes three major lineaments at different stages of development. The most developed, the Húsavík–Flatey Fault, presents a relatively simple geometry with a major fault that trends ESE–WNW. The stress pattern is however complex, with two dominant directions of extension, E–W and NE–SW on average. Both these extensions are compatible with the right-lateral transform motion and reveal different behaviours in terms of coupling. Transform motion has unambiguous fault expression along a mature zone, a situation close to that of the Tjörnes Fracture Zone. In contrast, transform motion along the immature South Iceland Seismic Zone is expressed through a more complicate structural pattern. At the early stage of the transform process, relatively simple stress patterns prevail, with a single dominant stress field, whereas, when the transform zone is mature, moderate and low coupling situations may alternate, as a function of volcanic–tectonic crises and induce changes in stress orientation.  相似文献   

11.
The focal mechanisms for 86 selected earthquakes (3.0 mb 5.5) located in central Alaska have been investigated from P-wave first motions; the data were gathered by local seismic networks. The results show a depth-dependent characteristic to the fault-plane solutions. For earthquakes having focal depths shallower than 60–70 km, the focal mechanisms indicate either strike-slip or normal faults, while for earthquakes with foci at intermediate depths the focal mechanisms correspond to thrust faults. The nature of the seismicity indicates the hinge line of the Pacific lithospheric plate under the study area to be striking N17°E from Cook Inlet towards interior Alaska. The comparison of the focal mechanisms with the seismicity shows that the strike-slip and normal faults are the predominant processes of stress release along the shallow section of the plate. The earthquakes with intermediate foci systematically occur along the inclined section of the plate. If the gently dipping nodal planes for these earthquakes are chosen as the fault planes, the focal mechanisms correspond to underthrust motions at the foci. In these, the slip vectors are oriented either to the west or north with the resultant being in the N30°W direction. The tension axes for the underthrust solutions are also found to be parallel to the local dip of the plate, indicating that the subducted plate in interior Alaska is undergoing gravitational sinking.  相似文献   

12.
Sakhalin Island straddles an active plate boundary between the Okhotsk and Eurasian plates. South of Sakhalin, this plate boundary is illuminated by a series of Mw 7–8 earthquakes along the eastern margin of the Sea of Japan. Although this plate boundary is considered to extend onshore along the length of Sakhalin, the location and convergence rate of the plate boundary had been poorly constrained. We mapped north-trending active faults along the western margin of the Poronaysk Lowland in central Sakhalin based on aerial photograph interpretation and field observations. The active faults are located east of and parallel to the Tym–Poronaysk fault, a terrane boundary between Upper Cretaceous and Neogene strata; the active faults appear to have reactivated the terrane boundary at depth in Quaternary time. The total length of the active fault zone on land is about 140 km. Tectonic geomorphic features such as east-facing monoclinal and fault scarps, back-tilted fluvial terraces, and numerous secondary faults suggest that the faults are west-dipping reverse faults. Assuming the most widely developed geomorphic surface in the study area formed during the last glacial maximum at about 20 ka based on similarities of geomorphic features with those in Hokkaido Island, we obtain a vertical component of slip rate of 0.9–1.4 mm/year. Using the fault dip of 30–60°W observed at an outcrop and trench walls, a net slip rate of 1.0–2.8 mm/year is obtained. The upper bound of the estimate is close to a convergence rate across the Tym–Poronaysk fault based on GPS measurements. A trenching study across the fault zone dated the most recent faulting event at 3500–4000 years ago. The net slip associated with this event is estimated at about 4.5 m. Since the last faulting event, a minimum of 3.5 m of strain, close to the strain released during the last event, has accumulated along the central portion of the active strand of the Tym–Poronaysk fault.  相似文献   

13.
We relocate the 1990–1991 Potenza (Southern Apennines belt, Italy) sequences and calculate focal mechanisms. This seismicity clusters along an E–W, dextral strike–slip structure. Second-order clusters are also present and reflect the activation of minor shears. The depth distribution of earthquakes evidences a peak between 14 and 20 km, within the basement of the subducting Apulian plate. The analysed seismicity does not mirror that of Southern Apennines, which include NW–SE striking normal faults and earthquakes concentrated within the first 15 km of the crust. We suggest that the E–W faults affecting the foreland region of Apennine propagate up to 25 km of depth. The Potenza earthquakes reflect the reactivation of a deep, preexisting fault system. We conclude that the seismotectonic setting of Apennines is characterized by NW–SE normal faults affecting the upper 15 km of the crust, and by E–W deeper strike–slip faults cutting the crystalline basement of the chain.  相似文献   

14.
The Kutch region located in northwestern part of India is an ancient rift basin that was active until Cretaceous period. The region falls close to the India–Arabia and the India–Eurasia plate boundaries and has experienced devastating earthquakes in the past, namely the 1819 Allah Bund earthquake, the 1956 Anjar earthquake and the 2001 Bhuj earthquake. To understand the tectonics of this region with respect to the adjacent plate boundaries, we invert seismic waveform data of 11 earthquakes in this region recorded by a network of the Institute of Seismological Research (ISR) during 2007–2009. The study yields focal mechanism solutions of reverse fault and strike-slip type mechanism. The inferred fault planes correlate well with the local trends of the known tectonic faults while the principal stress directions derived from stress inversion based on a linearized least squares approach, trend agreeably with the ambient stress field directions. A consistently right-lateral sense of shear is found on all the local faults as derived from each of the matching planes of the focal mechanism solutions computed in the present study. It is inferred that in the Kutch region a right-lateral strike-slip environment prevails along predominantly EW to NW-SE oriented deep-seated pre-existing faults in an otherwise compressive stress regime. This, in conjunction with the left-lateral movements along the Girnar mountain in southern Saurashtra, inferred from previous studies, indicates a westward escape of the Kutch–Saurashtra block as a consequence of the northward collision of the Indian plate with respect to the Eurasian landmass.  相似文献   

15.
Gravity and magnetic data of the Kachchh basin and surrounding regions have delineated major E–W and NW–SE oriented lineaments and faults, which are even extending up to plate boundaries in the north Arabian Sea and western boundary of the Indian plate, respectively. The epicentral zone of Bhuj earthquake and its aftershocks is located over the junction of Rann of Kachchh and median uplifts viz. Kachchh mainland and Wagad uplifts, which are separated by thrust faults. Gravity data with constraints from the results of the seismic studies along a profile suggest that the basement is uplifted towards the north along thrust faults dipping 40–60° south. Similarly gravity and magnetic modeling along a profile across Wagad uplift suggest south dipping (50–60°) basement contacts separating rocks of high susceptibility and density towards the north. One of these contacts coincides with the fault plane of the Bhuj earthquake as inferred from seismological studies and its projection on the surface coincides with the E–W oriented north Wagad thrust fault. A circular gravity high in contact with the fault in northern part of the Wagad uplift along with high amplitude magnetic anomaly suggests plug type mafic intrusive in this region. Several such gravity anomalies are observed over the island belt in the Rann of Kachchh indicating their association with mafic intrusions. The contact of these intrusives with the country rock demarcates shallow crustal inhomogeneities, which provides excellent sites for the accumulation of regional stress. A regional gravity anomaly map based on the concept of isostasy presents two centers of gravity lows of −11 to −13 mGal (10−5 m/s2) representing mass deficiency in the epicentral region. Their best-fit model constrained from the receiver function analysis and seismic refraction studies suggest crustal root of 7–8 km (deep crustal inhomogeneity) under them for a standard density contrast of −400 kg/m3. It is, therefore, suggested that significant amount of stress get concentrated in this region due to (a) buoyant crustal root, (b) regional stress due to plate tectonic forces, and (c) mafic intrusives as stress concentrators and the same might be responsible for the frequent and large magnitude earthquakes in this region including the Bhuj earthquake of January 26, 2001.  相似文献   

16.
Two moderate magnitude earthquakes (M5.5 and M5.4) occurred in January 2010 with their epicenters at a distance of about 5?km between them, in the western part of the Corinth Gulf. The recordings of the regional seismological network, which is dense locally, were used for the location of the two main events and aftershocks, which are concentrated in three clusters beneath the northern coasts of the Gulf. The first two clusters accompany each one of the two stronger earthquakes, whereas the third cluster comprises only low magnitude aftershocks, located westward of the two stronger events. Seismic excitation started in January 18, 2010, with the M?=?5.5 earthquake in the area occupied by the central cluster. Seismicity immediately jumped to the east with numerous aftershocks and the M?=?5.4 earthquake which occurred four days later (January 22, 2010). Cross sections normal to the long axis of each cluster show ruptures on north dipping faults at depths of 7?C11?km. Focal mechanisms of the stronger events of the sequence support the results obtained from the spatial distribution of the aftershocks that three different fault segments activated in this excitation. The slip vectors of all the events have an NNW?CSSE to NNE?CSSW orientation almost parallel to the direction of extension along the Corinth Gulf. Calculation of the Coulomb stress changes supports an interaction between the different clusters, with the major activity being coincided with the area of positive induced stress changes after the first earthquake.  相似文献   

17.
马瑾 《地学前缘》1999,6(4):363-370
讨论活动块体在地震活动中的作用。板缘地震在空间上呈线性分布,而中国大陆地震在空间上呈片状分布。大陆强震往往涉及两个以上方向断层的活动,且强震往往沿块体边界迁移或在其两侧断层上对迁。一些强震前后由中小地震震源机制解反映的Ｐ轴方向往往发生近９０°的转向,这种现象难以用区域应力方向变化来解释,但可从块体活动角度出发,用块体两个边界断层的先后错动来解释。地震前异常的远程效应、震后烈度异常分布图像以及地震序列特点等也显示了活动块体的作用。不同地区由地震活动性推测的块体活动方式有所差别,其原因可能和区域主压应力轴与块体两个边界断层走向的夹角不同有关。据此认为,在分析中国地震活动时要把视角从以活动断层为中心转变为以活动块体为中心  相似文献   

18.
We present a series of high-resolution seismic reflection lines across the Yizre'el valley, which is the largest active depression in Israel, off the main trend of the Dead Sea rift. The new seismic reflection data is of excellent quality and shows that the valley is dissected into numerous small blocks, separated by active faults. The Yizre'el valley is found to consist of a series of half grabens, rather than a single half graben, or a symmetrical graben. The faults are generally vertical and appear to have a dominant strike-slip component, but some dip-slip is also evident. A marked zone of compression near Megido is associated with the intersection of the two largest faults in the valley, the Carmel fault and the Gideon fault. Variable trend of the faults reflects the complexity of the local geology along the boundary between the wide NW–SE trending Farah–Carmel fault zone and the E–W trending basins and ranges in the Lower Galilee. This tectonic complexity is likely to result from a highly variable stress pattern, modified by the structures inside it. Normal faulting in the valley occurred at an early stage of its development as a tectonic depression. However, strike-slip motion on the Carmel fault, and possibly also on some of the other faults, appears to have started together with the onset of normal faulting. Earthquake hazard in the area appears to be uniform as faults are distributed throughout the Yizre'el valley.  相似文献   

19.
In the present work a detailed seismotectonic study of the broader area of the Mygdonia basin (N. Greece) is performed. Digital data for earthquakes which occurred in the broader Mygdonia basin and were recorded by the permanent telemetric network of the Geophysical Laboratory of the Aristotle University of Thessaloniki during the period 1989–1999 were collected and fault plane solutions for 50 earthquakes which occurred in the study area were calculated with a modified first motions approach which incorporates amplitude and radiation pattern information. Fault plane solutions for the 3 main shocks of Volvi (23/05/78, MW = 5.8 and 20/06/78, MW = 6.5) and Arnaia (04/05/95, MW = 5.8) events and the 1978 aftershock sequence were additionally used. Moreover, data from two local networks established in the Mygdonia basin were also incorporated in the final dataset.Determination of the stress field was realized by the use of the method of Gephart and Forsyth [Gephart, J.W., Forsyth, D.W., 1984. An improved method for determining the regional stress tensor using earthquake focal mechanism data: application to the San Fernando earthquake sequence: Jour. Geophys. Res., v.89, no. B11, p. 9305–9320] for the stress tensor inversion and the results were compared with independent estimates based on the calculation of the average moment tensor [Papazachos, C.B.,Kiratzi, A.A., 1992. A formulation for reliable estimation of active crustal deformation and its application to central Greece. Geophys. J. Int. 111, 424–432]. The obtained stress results show a relatively good agreement between the two approaches, with differences in the azimuth of the dominant extension axis of the order of 10°. Furthermore, comparison with independent information for the mean stress axes provided by the study of kinematics on neotectonic faults [Mountrakis, D., Kilias, A., Tranos, M., Thomaidou, E., Papazachos, C., Karakaisis, G., Scordilis, E., Chatzidimitriou, P., Papadimitriou, E., Vargemezis, G., Aidona, E., Karagianni, E., Vamvakaris, D. Skarlatoudis, A. 2003. Determination of the settings and the seismotectonic behavior of the main seismic-active faults of Northern Greece area using neotectonic and seismological data. Earthquake Planning and Protection Organisation (OASP) (in Greek)] shows a similar agreement with typical misfit of the order 10°. The stress inversion method was modified in order to select one or both nodal planes of the focal mechanism which corresponds to the “true” fault plane of the occurred earthquakes and was able to select a single fault plane in the majority of examined cases. Using this approach, the obtained fault plane rose diagrams are in agreement with results from various neotectonic studies. Moreover, several secondary active fault branches were identified, which are still not clearly observed in the field.  相似文献   

20.
A statistical analysis was carried out to investigate spatial associations between natural seismicity and faults in southeastern Ontario and north-central New York State (between 73°18′ and 77°00′W and 43°30′ and 45°18′N). The study area is situated to the west of the seismically active St. Lawrence fault zone, and to the east of the Lake Ontario basin where recently documented geological and geophysical evidence points to possible neotectonic faulting. The weights of evidence method was used to judge the spatial associations between seismic events and populations of faults in eight arbitrarily defined orientation groups. Spatial analysis of data sets for seismic events in the periods 1930–1970 and post-1970 suggest stronger spatial associations between earthquake epicentres and faults with strikes that lie in the NW–SE quadrants, and weaker spatial associations of epicentres with faults that have strikes in the NE–SW quadrants. The strongest spatial associations were determined for groups of faults with strikes between 101° and 146°. The results suggest that faults striking broadly NW–SE, at high angles to the regional maximum horizontal compressive stress, are statistically more likely to be spatially associated with seismic events than faults striking broadly NE–SW. If the positive spatial associations can be interpreted as indicating genetic relationships between earthquakes and mapped faults, then the results may suggest that, as a population, NW–SE trending faults are more likely to be seismically active than NE–SW striking faults. Detailed geological studies of faults in the study area would be required to determine possible neotectonic displacements and the kinematics of the displacements.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号