共查询到20条相似文献，搜索用时 156 毫秒
1.
《应用地球物理》2016,(3)
井地电位成像是通过套管向井中供电或将电源放在井中,在地表观测电位异常的一项技术,其供电源有线源和点源两种类型。为了研究这两种电源对地下异常体产生的电位异常特征,本文针对不同激励源,采用有限差分方法进行数值模拟研究,在线性方程组求解电位时引入不完全Cholesky共轭梯度(ICCG)迭代方法,分别实现了点源和线源井地电位成像技术的三维正演。最后,基于阻尼最小二乘法实现了井地电位成像技术的电阻率三维反演。设计不同地电模型分别进行正演和反演试算,正演结果表明,供电电源的类型不同,异常体在地表的电位异常特征也不同;反演结果表明,低阻体的反演结果要好于高阻体,点源置于异常体下方时反演的电阻率对异常体边界的识别比线源更加准确。 相似文献
2.
3.
地层介质的电各向异性增加了井地电阻率法响应的复杂性,开展基于电各向异性介质模型的井地电阻率法响应规律研究对于正确解释各向异性显著地区的观测数据特征至关重要.针对垂直线源井地电阻率法的任意各向异性响应模拟问题,本文提出了一种基于非结构网格有限元三维正演算法,通过引入3×3的对称正定张量来表征任意各向异性的电导率,采用非结构四面体网格有限元方法来离散电位的边值问题,通过将垂直线源等效为一系列点源问题,进而实现了任意各向异性介质中井地电阻率法的高效数值计算.通过与三个地电模型的解的对比,验证了本文数值解算法的精度和有效性.针对线源远离和垂直穿过异常体的两类模型,分别考察了当围岩或异常体为各向异性介质时的井地视电阻率响应特征.结果表明,对于各向异性地层,围岩和异常体的主轴电阻率值和旋转角均会对井地视电阻率的幅值及分布产生显著的影响.研究结果对于提高井地电阻率法的认识和资料解释水平具有重要的理论和实际意义. 相似文献
4.
5.
基于非结构网格有限元方法开展了三维复杂地电模型的线源井地电法的高效正演模拟研究,探讨了通过求取电场响应导数来刻画目标体边界范围、采用差异场地形校正技术来消除地形影响等措施对井地电法成像的效果和精度的影响。并通过对比与解析解,验证了本文数值解算法的有效性。模型计算结果表明：积水巷道的空间位置和走向均会引起视电阻率的显著变化,视电阻率变化率的极值准确且清晰地指示了巷道边界的位置;电位的归一化总水平导数极大地提高了井地电法对目标体复杂边界位置的识别能力;地形对井地电场分布的影响也很大,其视电阻率响应与地形形状近似呈对称关系,利用差异场技术能有效地削弱地形对井地电法高精度成像的影响。 相似文献
6.
《地球物理学进展》2017,(5)
在大斜度井和水平井中,不同电阻率测井系列测量的结果并非完全一致,测量结果的差异性分析对于正确认识和评价地层非常重要.依据双侧向测井和随钻电磁波测井原理,采用三维有限元素法模拟双侧向在水平井中的测井响应特征,采用积分方程法模拟随钻电磁波电阻率在水平井中的测井响应特征,通过对比分析值模拟结果,造成大斜度井和水平井随钻电阻率与双侧向电阻率测井响应差异的主要因素有:井斜、各向异性、地层界面以及泥浆侵入.随钻电阻率一般受泥浆侵入影响小,但是它在水平井中容易产生极化现象,有助于地层界面识别,同时受各向异性影响明显;而双侧向电阻率在水平地层中对地层界面不敏感,且受各向异性影响相对较弱,但会受泥浆侵入影响严重;正确认识这些差异,可以有效指导水平井的合理解释. 相似文献
7.
《地球物理学进展》2017,(1)
随着城市工程勘探及煤矿采矿区勘探要求的不断提高,二维地面及孔间电阻率成像无法确定电性异常沿垂直剖面方向延伸范围,三维地面电阻率成像面临着纵向分辨率小、空间覆盖不均匀等问题.本文提出井地井三维全通道电阻率成像方法,该方法计算时采用除去2个供电电极外其余全部接地电极所采集数据进行反演计算.在成像时首先采用有限差分方法求解3D静电场方程,并基于伴随矩阵方法计算非线性灵敏度矩阵,最后利用牛顿共轭梯度反演方法实现全通道电阻率层析成像.通过理论数据测试表明:全通道3D井地井联合观测方式能有效的对孔间电性结构三维成像,具有较好的纵横向分辨率,可以较好的解决实际工程地质问题及采空区在空间的分布形态难题. 相似文献
8.
《应用地球物理》2017,(3)
大斜度井/水平井中,随钻电磁波电阻率测井与双侧向测井由于测量原理不同,引起的测井响应特征有着较大差别。首先依据积分方程法模拟了随钻电磁波电阻率测井在大斜度井/水平井中的测井响应特征,采用三维有限元素法模拟了双侧向测井在大斜度井/水平井中的测井响应特征,然后对比分析了二者在水平地层中的测井响应差异和产生的原因。结果表明,水平井中随钻电磁波电阻率测井和双侧向测井响应差异的主要影响因素有:不同井斜角、地层各向异性、地层界面以及泥浆侵入等。随着相对井斜角的增大,随钻电磁波电阻率测井在地层界面处的测井响应异常大,而双侧向测井在地层界面附近受围岩影响逐渐变得平滑;随着相对井斜角的增加,各向异性的影响逐渐增大,但各向异性对双侧向测井的影响程度要小于对随钻电磁波电阻率的影响。这些差异如不能正确认识将导致水平井解释过程中出现偏差。最后根据实际资料,分析如何这些差异进行水平井测井解释。 相似文献
9.
10.
利用三维感应测井交叉分量之差响应曲线在边界附近的响应行为,建立了求解大斜度井中井斜角快速反演方法.响应曲线随真实垂直深度(TVD)变化的对数衰减率与随测量距离(MD)变化的对数衰减率与之比是井斜角的余弦函数,通过简单三角函数计算可快速反演井斜角.响应曲线形态规则,在层状各向异性地层中与垂直电导率无关,主要反映水平电导率反差造成的地层边界信息.因此本文的井斜角快速反演方法既适用于各向同性地层也适用于各向异性地层.我们考察了测井环境及仪器参数对响应曲线衰减率的影响以及衰减率估算偏差对井斜角反演精度的影响.数值模拟结果验证了该反演方法在大斜度井中的有效性和实用性. 相似文献
11.
Borehole-to-surface electrical imaging (BSEI) uses a line source and a point source to generate a stable electric field in the ground. In order to study the surface potential of anomalies, three-dimensional forward modeling of point and line sources was conducted by using the finite-difference method and the incomplete Cholesky conjugate gradient (ICCG) method. Then, the damping least square method was used in the 3D inversion of the formation resistivity data. Several geological models were considered in the forward modeling and inversion. The forward modeling results suggest that the potentials generated by the two sources have different surface signatures. The inversion data suggest that the low-resistivity anomaly is outlined better than the high-resistivity anomaly. Moreover, when the point source is under the anomaly, the resistivity anomaly boundaries are better outlined than when using a line source. 相似文献
12.
Ahmad Neyamadpour Samsudin Taib W. A. T. Wan Abdullah 《Studia Geophysica et Geodaetica》2009,53(3):389-402
A 3D electrical resistivity imaging survey is presented in this paper. The objective was to investigate an underground wastewater
system at the University of Malaya, Malaysia. Apparent resistivity data were collected along ten parallel lines using a Wenner-Schlumberger
configuration; electrode cables were oriented in the x-direction with 3 m spacing. Roll-along measurements using a line spacing
of 3 m were carried out covering a grid of 20 × 10 electrodes. All data sets were merged into a single data file in order
to perform a 3D inversion. Two different 3D least squares algorithms, based on the robust inversion method and the smoothness-constrained
technique, were used for the inversion of the apparent resistivity data. Both the horizontal and vertical extents of the anomalous
zones found by inversion are displayed. The results indicate the superiority of the robust inversion method over the smoothness-constrained
technique at this site. The results are in sufficient accordance with previously known information about the investigation
area. The results show that 3D electrical resistivity imaging surveys, in combination with an appropriate 3D inversion method,
can be highly useful for engineering and archaeological investigations as well as for environmental applications. 相似文献
13.
在利用不同的地球物理勘探方法对地下复杂介质成像时,因观测系统的非完备性及数据本身对某些岩石物性的不敏感性,单独成像的结果存在较大的不确定性和不一致性.对于地震体波走时成像与直流电阻率成像,均面临着成像阴影区问题.对于地震走时成像,地震射线对低速区域覆盖较差形成阴影区,造成低速区域分辨率降低.对于电阻率成像,电场线在高阻区域分布较少,造成高阻区域分辨率较低.为了提高地下介质成像的精度,Gallado和Meju(2003)提出了基于交叉梯度结构约束的联合地球物理成像方法.在要求不同的物性模型拟合各自对应的数据同时,模型之间的结构要求一致,即交叉梯度趋于零.为了更有效地实现基于交叉梯度的结构约束,我们提出了一种新的交替结构约束的联合反演流程,即交替反演不同的数据而且在反演一种数据时要求对应的模型与另一个模型结构一致.新的算法能够更容易地把单独的反演系统耦合在一起,而且也更容易建立结构约束和数据拟合之间的平衡.基于新的联合反演流程,我们测试了基于交叉梯度结构约束的二维跨孔地震走时和直流电阻率联合成像.合成数据测试表明,我们提出的交替结构约束流程能够很好地实现基于交叉梯度结构约束的联合成像.与单独成像结果相比,地震走时和全通道电阻率联合成像更可靠地确定了速度和电阻率异常. 相似文献
14.
在定向井中,双侧向测井数据由于受井眼、围岩、井斜、径向侵入等环境因素的影响,难以准确地估算储层的电阻率和更准确地识别储层流体.本文拟提出图版法和反演法相结合的思路来研究地层视电阻率的校正问题.首先,针对研究区的测井环境和钻井液电阻率,计算了不同尺寸井眼的双侧向测井响应,绘制了井眼校正图版;然后,针对斜度井地层模型,采用三维有限元方法计算了不同井斜、不同厚度地层的测井响应,构建了井斜-围岩/层厚图版,利用该图版实现了井眼校正和井斜-围岩/层厚的电阻率快速校正.最后,针对钻井液侵入的影响,采用反演方法计算了侵入半径和地层真电阻率,最终实现了双侧向测井的环境校正.利用上述理论与方法对海洋中定向井的双侧向测井资料进行了环境校正,提高了储层流体定性识别和定量评价的精度. 相似文献
15.
垂直线电流源的三维电阻率成像 总被引：5，自引：0，他引：5
在油井注水和深井注浆的电法监测中,地表布设平面的电位测量网,而将钻井的钢套管作为线电流源来供电,据此可确定流体的运动方向和分布特征.数据处理中需解决垂直线电流源的三维电阻率反演.本文叙述了相应的反演理论和偏导数计算方法.在某油田的试验中,以生产井为电极圈的中心,每圈均匀布设18个电极,共6圈,在地表得到了108个电位数据,获得500～2 000m之间5个不同深度层的真电阻率分布图像,并对深度层为1 500～1 600m的图像进行了初步解释.结果表明,该方法可以对井下某深度层中的流体运动和分布可进行有效的监测. 相似文献
16.
There exist different response characteristics in the resistivity measurements of dual laterolog (DLL) and logging while drilling (LWD) electromagnetic wave propagation logging in highly deviated and horizontal wells due to the difference in their measuring principles. In this study, we first use the integral equation method simulated the response characteristics of LWD resistivity and use the three dimensional finite element method (3D-FEM) simulated the response characteristics of DLL resistivity in horizontal wells, and then analyzed the response differences between the DLL and LWD resistivity. The comparative analysis indicated that the response differences may be caused by different factors such as differences in the angle of instrument inclination, anisotropy, formation interface, and mud intrusion. In the interface, the curves of the LWD resistivity become sharp with increases in the deviation while those of the DLL resistivity gradually become smooth. Both curves are affected by the anisotropy although the effect on DLL resistivity is lower than the LWD resistivity. These differences aid in providing a reasonable explanation in the horizontal well. However, this can also simultaneously lead to false results. At the end of the study, we explain the effects of the differences in the interpretation of the horizontal well based on the results and actual data analysis. 相似文献
17.
Ahmad Neyamadpour 《Studia Geophysica et Geodaetica》2011,55(4):755-769
The applicability of three kinds of electrode configurations used to delineate a buried horizontal pipe was studied. A 3D
resistivity imaging survey was carried out along eight parallel lines using pole-pole, pole-dipole, and dipole-dipole arrays
with 1m minimum electrode spacings. Roll-along measurements were carried out to cover a rectangular grid. The 2D and 3D least
squares algorithms based on the robust inversion method were used in the inversion of the apparent resistivity data sets.
The 2D inversion of data sets could not delineate the orientation and dimension of the subsurface anomalies clearly. To obtain
more accurate results, a 3D joint inversion of the pole-pole and pole-dipole data sets was performed, as well as of pole-pole
and dipole-dipole data sets. In this case, both horizontal and vertical dimensions of subsurface structures were resolved.
The resulting model obtained from each array was compared to those of joint inversion method. The result showed that the horizontal
resolution does not improve so much as that in the vertical direction when joint inversion is applied. 相似文献
18.
Ahmad Neyamadpour W. A. T. Wan Abdullah Samsudin Taib 《Studia Geophysica et Geodaetica》2010,54(2):299-311
The objective of this paper is to investigate the applicability of four-electrode arrays in 3D electrical resistivity imaging
survey. A 3D resistivity imaging survey was carried out along fourteen parallel lines using dipole-dipole, Wenner-Schlumberger,
and Wenner arrays with 2 m minimum electrode spacings. Roll-along measurements using a line spacing of 1 m were carried out
covering a grid of 20 × 14 electrodes. The 3D least squares algorithm, based on the robust inversion method, was used in the
inversion of the 3D apparent resistivity data sets. The results show that the 3D electrical resistivity imaging survey using
the Wenner-Schlumberger and the dipole-dipole arrays, or the Wenner and the dipole-dipole arrays, in combination with an appropriate
3D inversion method, can be highly useful when the site conditions do not allow using the pole-pole or pole-dipole arrays. 相似文献
19.
为了较全面、客观地认识宁芜矿集区上地壳电性结构,研究"玢岩铁矿"成矿规律与深部地球物理、地质结构的对应关系,为探索深部"第二找矿空间"提供物性参数,我们完成了6条宽频大地电磁测深剖面.通过分析各剖面电性成像结果,讨论了"长江断裂带"与矿集区成矿的关系,并且认为围岩、岩浆及其上侵通道是区内矿床的控矿因素.此外,结合姑山铁矿床的位置以及铁矿床成矿规律判断宁芜火山岩盆地南部低阻条带为矿集区姑山火山-岩浆旋回的岩浆(导矿)通道,而盆地东部邻区的倾斜"叠瓦状"电性特征说明该区在经历了印支期褶皱构造运动后发育了逆冲推覆构造. 相似文献
20.
直流电阻率法以其对含水构造响应敏感且适应性强的特点,是隧道施工期超前地质预报的常用方法.针对目前定点源三极观测方式易受到测线附近旁侧异常干扰与聚焦观测方式探测距离过短无法三维成像的问题,提出了一种基于多同性源阵列电阻率的隧道超前探测新方法,利用环形布置的多同性源供电压制隧道掌子面后方的异常体的干扰,同时增强掌子面前方远处异常体的敏感度,阵列电极测量可为含水构造的三维反演成像提供三维数据.首先,开展了含水构造超前探测的数值正演模拟,发现多同性源方法的视电阻率纵向微分曲线极小值以及与横轴的交点位置可对异常体位置进行定性判断,探讨了多同性源方法对后方及侧向异常干扰的响应特征及识别方法.其次,将电阻率光滑约束与轨迹光滑策略引入蚁群反演算法,提出了一种最小二乘方法与改进蚁群算法相结合的混合反演算法,反演数值算例表明混合反演算法能够实现含水构造的三维成像,较好地反演出不同距离的含水构造位置,并使其边界较为清晰.为了验证多同性源探测方法的探测效果开展了物理模型试验,多同性源阵列电阻率法能较好的反映含水构造的存在,与实际含水构造的位置较为相符. 相似文献