首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Concentration data on up to 82 individual constituents in USGS Basalt BCR-1 have been collected from 1395 journal articles and technical reports. These data are summarized in consensus (mean) values with uncertainties expressed as ± one standard deviation. Mean values are also calculated as a function of analytical procedure and all raw data are given in the tables. Recommended values are proposed based upon data criteria used by NIST (National Institute of Standards and Technology, formerly the National Bureau of Standards or NBS).  相似文献   

2.
Concentration data on 73 individual constituents in United States Geological Survey (USGS) Geochemical Exploration Reference Materials GXR-1 to GXR-6 have been collected from 131 journal articles and technical reports. These data are summarized as consensus (mean) values with uncertainties expressed as one standard deviation. Mean values are also calculated as a function of analytical procedure and all raw data are given in the tables. Recommended values are proposed based upon data criteria used by NIST (National Institute of Standards and Technology, formerly the National Bureau of Standards or NBS).  相似文献   

3.
Concentration data on 80 individual constituents in Canadian Certified Reference Materials Project rock reference materials SY-2, SY-3, and MRG-I have been collected from 382 journal articles and technical reports. These data are summarized as consensus (mean) values with uncertainties expressed as one standard deviation. Mean values are also calculated as a function of analytical procedure and all raw data are given in the tables. Recommended values are proposed based upon data criteria used by NIST (National Institute of Standards and Technology, formerly the National Bureau of Standards or NBS).  相似文献   

4.
Concentration data on up to 90 individual constituents in USGS AGV-1, GSP-1, and G-2 have been collected from 1270 journal articles and technical reports. These data are summarized in consensus (mean) values with uncertainties expressed as +/- one standard deviation. Mean values are also calculated as a function of analytical procedure and all raw data are given in the tables. Recommended values are proposed based upon data criteria used by NIST (National Institute of Standards and Technology, formerly the National Bureau of Standards or NBS).  相似文献   

5.
Concentration data on up to 91 individual constituents in USGS DTS-1, G-1, PCC-1, and W-1 have been collected from 1647 journal articles and technical reports. These data are summarized in consensus (mean) values with uncertainties expressed as one standard deviation. Mean values are also calculated as a function of analytical procedure and all raw data are given in the tables. Recommended values are proposed based upon data criteria used by NIST (National Institute of Standards and Technology, formerly the National Bureau of Standrds or NBS).  相似文献   

6.
Concentration data on 74 individual constituents in CCRMP (Canadian Certified Reference Materials Project) soils SO-1, SO-2, SO-3, and SO-4 have been collected from 83 journal articles and technical reports. These data are summarized in consensus (mean) values with uncertainties expressed as one standard deviation. Mean values are also calculated as a function of analytical procedure and all raw data are given in the tables. Recommended values are proposed based upon data criteria used by NIST (National Institute of Standards and Technology, formerly the National Bureau of Standards or NBS).  相似文献   

7.
Marine research survey data on fish stocks often show a small proportion of very high-density values, as for many environmental data. This makes the estimation of second-order statistics, such as the variance and the variogram, non-robust. The high fish density values are generated by fish aggregative behaviour, which may vary greatly at small scale in time and space. The high values are thus imprecisely known, both in their spatial occurrence and order of magnitude. To map such data, three indicator-based geostatistical methods were considered, the top-cut model, min–max autocorrelation factors (MAF) of indicators, and multiple indicator kriging. In the top-cut and MAF approaches, the variable is decomposed into components and the most continuous ones (those corresponding to the low and medium values) are used to guide the mapping. The methods are proposed as alternatives to ordinary kriging when the variogram is difficult to estimate. The methods are detailed and applied on a spatial data set of anchovy densities derived from a typical fish stock acoustic survey performed in the Bay of Biscay, which show a few high-density values distributed in small spatial patches and also as solitary events. The model performances are analyzed by cross-validating the data and comparing the kriged maps. Results are compared to ordinary kriging as a base case. The top-cut model had the best cross-validation performance. The indicator-based models allowed mapping high-value areas with small spatial extent, in contrast to ordinary kriging. Practical guidelines for implementing the indicator-based methods are provided.  相似文献   

8.
Concentration data for as many as 72 constituents in the four Canadian Certified Reference Materials Project (CCRMP) soil samples have been collected from journal articles and technical reports published since these soil standards were issued in 1978. These data are summarized into mean +/- one standard deviation values and compared with available certification data from CCRMP. All literature data located or calculated are presented in the appendices.  相似文献   

9.
Provisional values related to element concentration derived from partial extractions as well as some additional total concentration data are reported for eight CCRMP sediment reference materials. These values are intended to supplement previously published data for these samples. The partial extractions for which data are reported include dilute HNO3 - dilute HCl, concentrated HNO3 -concentrated HCl and concentrated HNO3 -concentrated HClO4.  相似文献   

10.
径向基神经网络在地面沉降预测中的应用   总被引：1，自引：0，他引：1  
王忠忠  钱为民 《地下水》2006,28(2):84-87
基于MATLAB6.5平台编程,利用前四年的沉降量作为输入神经元,后一年的沉降量作为输出神经元,重复此过程,构建了上海高桥地区地面沉降预测径向基神经网络.以历史沉降数据为训练样本,并对其进行归一化处理,在此基础上,采用未归一化及归一化后的训练样本进行网络训练与检验.结果表明,归一化后的训练样本训练得到的径向基网络具有良好的预测性能.最后利用该网络对1990-2010年的地面沉降量进行了预测.  相似文献   

11.
中国水系沉积物39种元素系列背景值   总被引：3，自引：0，他引：3       下载免费PDF全文
史长义  梁萌  冯斌 《地球科学》2016,41(2):234-251
中国以水系沉积物测量为主的区域地球化学调查自1978年开始以来,已覆盖陆地面积约690×104 km2,积累了海量的高质量基础地球化学数据.在这些数据的开发利用中不同地区、不同范围间的数据对比是研究元素分散富集、成矿趋势、异常评价的一项重要内容.以全国1:20万水系沉积物测量数据为依据,采用全部原始数据,以X±3S为临界值一次性剔除异点后的数据集的中位数作为背景值的估计值,使用统一方法计算出了全国范围、9个大地构造单元、12个地球化学景观区、19个成矿带的39种元素水系沉积物背景值,探讨了全国范围、不同构造单元、不同景观区、不同成矿带各元素背景值的区域分布规律和特征.研究表明不同的景观区、不同的成矿带、不同的大地构造单元,由于地质背景和景观条件不同,元素的地球化学分布特征也不同,表现出不同的区域分布特点和分布模式.这些背景值为进一步深入开发利用区域化探数据和资料提供了可供对比的基础数据.   相似文献   

12.
The contamination of cuttings and side-wall core (SWC) samples in the Bambra-2 well by drilling-mud additives and natural hydrocarbons may cause Ruek-Eval Tmax (℃) data to be suspect, and affect its utility in the assessment of thermal maturity. The Rock-Eval results of 284 cuttings samples, 31 side-wall core samples and conventional core samples from the Jurassic-Cretaceous sedimentary sequences in the Bambra-2 well are presented in this paper. Significantly lower Tmax values from cuttings samples compared with Tmax values from conventional core samples and solvent extracted SWC samples, from the deeper and higher maturity interval, are thought to have been caused by contamination by diesel and other drilling-mud additives. The cuttings samples in the Barrow Group of Cretaceous may be contaminated by natural hydrocarbons, resulting their Tmax values to be 2-10℃ lower than a regularly increased Tmax trend from core samples. This study indicates that more reliable Rock-Eval Tmax data are obtained from the conventional core samples and solvent extracted SWC samples. This study also indicates that the Tmax values from some SWC samples were also affected by free hydrocarbons, due to the use of diesel as a mud additive as well.  相似文献   

13.
Carbon and oxygen isotopes were determined on 40 recrystallized shells of Late Jurassic bivalves from the Lusitanian Basin of Portugal. In contrast with the oxygen isotopes, which exhibited considerable diagenetic distortion, the carbon isotopes are thought to preserve a record of the salinity of the Jurassic marginal marine seas in which these bivalves lived. The reconstructed palaeosalinities range from 35%o (euhaline) to 5% (oligohaline). Comparing these values with the palaeosalinity reconstructed from a palaeoecological analysis of 17 stratigraphic levels within the basin, the independently derived values agree in most cases. Strongly differing values are explained as being due to biotic factors and to diagenetic distortion of the isotopic signal; they are less likely to be due to smallscale time-averaging or insufficient microstratigraphic sampling. On the whole, the carbon isotope analyses are thought to produce reasonable palaeosalinity values, although data from infaunal, originally aragonitic bivalves appear to be less reliable than those from epifaunal bivalves with a predominantly or exclusively calcitic shell. As diagenetic alteration of the carbon isotope signal is, however, unpredictable and biotic effects on the isotopic composition are insufficiently known, palaeosalinity reconstructions based on stable isotope data should be supported by palaeoecological data.  相似文献   

14.
报道的高钾-钾玄质火山岩位于狮泉河镇南东方向约20km处,向东延伸。高钾-钾玄质火山岩Si O2变化于60.35%~68.68%之间,属中酸性岩范畴;具有高的K2O+Na2O含量(8.8%~10.66%),K2O/Na2O值在1.92~2.49之间,Mg O含量较低,介于0.88%~3.47%之间,Al2O3含量为14.02%~14.91%,属于高钾-钾玄质系列。岩石强烈富集大离子亲石元素(LILE)Rb、Ba、Th、U和轻稀土元素(LREE),高场强元素(HFSE)Nb、Ta、Ti具有明显负异常,Cr、Ni、Co相容元素含量低于或接近地壳的平均含量,结合Th/Yb-Ta/Yb、(Th×100)/Zr-(Nb×100)/Zr判别图及La-La/Yb图解,暗示岩浆源区可能为下地壳。在左左乡南东约2km处和狮泉河水泥厂北东约1km处各采集1个高钾-钾玄质火山岩样品,对其中的锆石进行LA-ICP-MS U-Pb同位素测定,得到的206Pb/238U年龄加权平均值分别为22.04±0.42Ma和22.29±0.31Ma,此年龄被解释为狮泉河一带高钾-钾玄质火山岩的喷发时代,即中新世阿启塔期。由此表明,该火山岩是印度板片向北俯冲时在狮泉河一带俯冲板片断离,岩浆发生部分熔融的产物。  相似文献   

15.
There is much information in the literature relating to the classification, strength, deformability, permeability and other geotechnical properties displayed by British overconsolidated clays and mudrocks. The opportunity has been taken in this paper to collate published values of the more important geotechnical parameters for a number of Tertiary formations and to present ranges and averages in a convenient form.

The data are intended to serve as a reference of typical values of parameters, but it must be recognised that the results were derived from tests on material from particular locations and will not necessarily be typical of formations as a whole. Meaningful interpretation is possible only when there is complete awareness as to why values may vary. Since the degree of weathering is particularly important, values for both weathered and unweathered material are presented, where possible. However, discussion of the data indicates that mineralogical composition, geological loading, present burial depth and method of testing are also significant causes of variation.

Some of the implications regarding the choice of design parameters are discussed; of particular relevance is the degree and orientation of fissuring present in the material.  相似文献   


16.
《Applied Geochemistry》1999,14(1):133-145
Three univariate geostatistical methods of estimation are applied to a geochemical data set. The studied methods are: ordinary kriging (cross-validation), factorial kriging, and indicator kriging. These techniques use the probabilistic and spatial behaviour of geochemical variables, giving a tool for identifying potential anomalous areas to locate mineralization. Ordinary kriging is easy to apply and to interpret the results. It has the advantage of using the same experimental grid points for its estimates, and no additional grid points are needed. Factorial kriging decomposes the raw variable into as many components as there are identified structures in the variogram. This, however, is a complex method and its application is more difficult than that of ordinary or indicator kriging. The main advantages of indicator kriging are that data are used by their rank order, being more robust about outlier values, and that the presentation of results is simple. Nevertheless, indicator kriging is incapable of separating anomalous values and the high values from the background, which have a behaviour different to the anomaly. In this work, the results of the application of these 3 kriging methods to a set of mineral exploration data obtained from a geochemical survey carried out in NW Spain are presented. This area is characterised by the presence of Au mineral occurrences. The kriging methods were applied to As, considered as a pathfinder of Au in this area. Numerical treatment of Au is not applicable, because it presents most values equal to the detection limit, and a series of extreme values. The results of the application of ordinary kriging, factorial kriging and indicator kriging to As make possible the location of a series of rich values, sited along a N–S shear zone, considered a structure related to the presence of Au.  相似文献   

17.
Using the Total Ozone Mapping Spectrometer (TOMS) data from the National Aeronautics and Space Administration (NASA) earth satellites, the Aerosol Optical Depth (AOD) as indicated by AOD Index (AI) for the period 1978–2005 is analyzed for northern China. The spatial distribution of annual mean AI has the largest values in the desert regions of northwestern China, such as southern Xinjiang Taklimakan Basin, western Gansu and Qinghai’s Qaidam Basin. Large values are found in western Inner Mongolia, the Jogger Basin, and north of the Loess Plateau, as well as in the North China and Northeast China Plains. In Northern China, the AI of spring and summer is larger than in other seasons. The large AI values in spring register the most extensive coverage, but the AI values in regions affected by the Asian monsoon experience a significant decrease during the summer season. The lowest AI values generally occur in autumn in North and Northeast China, but they appear in winter in the northwestern arid region. Overall, the analysis results using TOMS AI data well reflect the spatiotemporal characteristics of dust aerosol as reported previously based on the dust weather observation data, with greater consistency seen in northwestern arid and semi-arid regions. It is also realized that the TOMS AI data are potentially useful for estimating atmospheric mineral aerosol deposition flux in northern China in order to better understand the formation and evolution of China loess in the Quaternary.  相似文献   

18.
西藏地堡那木岗矿区水系沉积物地球化学特征及找矿预测   总被引：1，自引：0，他引：1  
利用SPSS等软件对矿区1：5万水系沉积物地球化学数据分析,选用平均值±3倍标准差（X±3S）作为上下限反复剔除原始数据的特值,使元素含量服从正态分布.最后以X+2S作为异常下限（T）,以1T、2T、4T三级浓度分带,圈定Cu、Au、Ag、Mo单元素异常和Au-Ag-Mo综合元素异常,揭示矿区内水系沉积物地球化学异常特征.将异常区与矿区地质特征、矿床（点）套合分析,表明异常受地层、断裂、围岩蚀变控制,对寻找矿（化）体、断层、围岩蚀变带有指示作用.最终,优选2处远景区,分别为3号综合异常区中心北北西方向至北东向断裂附近,1号、2号综合异常区及其东侧组成一个走向为东西向的异常带.  相似文献   

19.
Reservoir characterization of sand-shale sequences has always challenged geoscientists due to the presence of anisotropy in the form of shale lenses or shale layers. Water saturation and volume of shale are among the fundamental reservoir properties of interest for sand-shale intervals, and relate to the amount of fluid content and accumulating potentials of such media. This paper suggests an integrated workflow using synthetic data for the characterization of shaley-sand media based on anisotropic rock physics (T-matrix approximation) and seismic reflectivity modelling. A Bayesian inversion scheme for estimating reservoir parameters from amplitude vs. offset (AVO) data was used to obtain the information about uncertainties as well as their most likely values. The results from our workflow give reliable estimates of water saturation from AVO data at small uncertainties, provided background sand porosity values and isotropic overburden properties are known. For volume of shale, the proposed workflow provides reasonable estimates even when larger uncertainties are present in AVO data.  相似文献   

20.
In this article, separation between the geoid and the quasigeoid was calculated using ground gravity data and the data extracted from two Global Geopotential Models (GGMs). The calculated results were compared together. To do so, the authors used the terrestrial gravity data in a vast region of Iran, comprising 8,245 stations which are kindly put in our disposal by the National Cartographic Center of Iran, as well as two GGMs, namely EGM96 and EGM2008 for comparison. The calculation of the separation for GGMs was performed by iteration method. The results showed that the geoid–quasigeoid separations obtained from the terrestrial data versus the orthometric heights are nonlinear in mountainous areas, whereas they are almost linear in flat regions due to decreasing the values of the topographic potential of the masses between the earth surface and the geoid. On the other hand, in case of GGMs, a positive correlation was observed between the separations and the orthometric heights in both mountainous and flat areas. As the difference between the separations extracted by two methods in mountainous areas—especially in the regions with ragged topography—differs strongly, it is recommended to use the dense gravity and height networks for accurate determination of the geoid–quasigeoid separation in these regions. Finally, we can conclude that the mean values of separation by two global geopotential models (EGM96 and EGM2008) are 21.87 and 21.23 cm, respectively, values which did not differ strongly, whereas this mean value obtained from ground gravity data is 16.10 cm, which differs from the GGMs’ results with approximately 5 cm.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号