首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
In this paper, we address the average compositions (including the contents of H2O, Cl, F, and S) and the compositional structure of oceanic mantle plumes on the basis of element contents and ratios in ocean island magmas. The average contents of incompatible volatile and nonvolatile elements were calculated for the material of mantle plumes using a thermal and a more plausible moderately enriched model. The following average contents were estimated for the plume mantle: 510 ppm K2O, 520 ppm H2O, 21 ppm Cl, 55 ppm F, and 83 ppm S. These values are significantly higher than those of the depleted mantle (except for S). The primitive mantle normalized average content of water in mantle plumes is similar to those of La and Ce but lower than those of K, Cl, and Sr. This is at odds with the hypothesis of “wet” mantle plumes. Three types of basaltic magmas distinguished in our previous study (Part I) characterize three types of plume sources (MI, MII, and MIII). Using the favored moderately enriched model, the average contents of H2O, Cl, F, and S were estimated for the three sources (ppm): 130, 33, 11, and 110 for MI; 110, 12, 65, and 45 for MII; and 530, 29, 49, and 110 for MIII, respectively. The plume mantle is heterogeneous and its heterogeneity can be described by the presence of three main types of compositions, one of which (MI) is similar to the composition of the mid-ocean ridge mantle and the other two types (MII and MIII) are moderately enriched in K, Ti, P, F, and incompatible trace elements but depleted in Cl, H2O, and sometimes S. The compositions of MII and MIII have different H2O, Cl, and S contents: MII is significantly depleted in these components compared with MIII. The MII component is probably similar to the enriched mantle (EM). In addition to the aforementioned three main components, the plume mantle probably contains high-Cl and low-F materials, which are related to the recycling of the oceanic and continental crust. All the observed characteristics of the mantle plumes are in adequate agreement with the model of a zonal mantle plume including a central part hot and depleted in H2O, Cl, and S; a periphery enriched in volatile components; and the enclosing mantle interacting with the plume material.  相似文献   

2.
Based on the generalization of the compositions of melt inclusions and quenched glasses from basaltic rocks, the average compositions of magmas were estimated for mid-ocean ridges (MOR), intraplate continental environments (CR), and ocean islands and plateaus (OI). These compositions were used to constrain the average contents of trace and volatile elements in mantle sources. A procedure was developed for the estimation of the average contents of incompatible elements, including volatiles (H2O, Cl, F, and S), in the mantle. A comparison of the obtained average contents for the depleted mantle (DM) with the available published estimates showed that the contents of most incompatible trace elements (H2O, Cl, F, Be, B, Rb, Sr, Zr, Ba, La, Ce, Nd, Sm, Eu, Hf, Ta, Th, and U) can be reliably estimated from the ratio of K to the desired trace element in the MOR magmas and the average content of K in the DM. For Nb, Ti, P, S, Li, Y, and heavy REE, we used the ratios of their contents to an element with a similar degree of incompatibility in MOR magmas (U for Nb and Dy for the other elements). This approach was used to determine the average contents of incompatible elements in oceanic plume mantle (OPM) and the subcontinental mantle of intraplate settings or continental plume mantle (CPM). It was shown that the average composition of both suboceanic and subcontinental mantle plumes is moderately enriched compared with the DM in the most incompatible elements (K, U, Ba, and La) and volatile components (H2O, Cl, and F). The extent of volatile component enrichment in the plume mantle (500–1500 ppm H2O) is insufficient for a significant depression of the mantle solidus. Therefore, mantle plumes must be hotter than the ambient depleted mantle. The average contents of incompatible trace elements in the OPM are similar to those of the primitive mantle, which could be related either to the retention of primitive mantle material in the regions of plume generation or to DM fertilization at the expense of the deep mantle recycling of crustal materials. In the latter case, the negative anomaly of water in the trace-element distribution patterns of the OPM is explained by the participation of dehydrated crust in its formation. Variations in the compositions of magmas and their sources were considered for various geodynamic settings, and it was shown that the sources are heterogeneous with respect to trace and volatile components. The chemical heterogeneity of the magma sources and gradual transitions between them suggest that the mantle reservoirs interact with each other. Chemical variations in continental and oceanic plume magmas can be attributed to the existence of several interacting sources, including one depleted and at least two enriched reservoirs with different contents of volatiles. These variations are in agreement with the zoned structure of mantle plumes, which consist of a hot and relatively dry core, a colder outer shell with high contents of volatile components, and a zone of interaction between the plume and depleted mantle.  相似文献   

3.
Using our database of the compositions of melt inclusions and quenched glasses of basaltic magmas from mid-ocean ridges (MORB), the average concentrations and ratios of H2O, Cl, F, S, K2O, Ce, and Dy were determined in these magmas. Assuming that the concentration ratios of volatile components to K2O are constant in the MORB magmas and their sources (depleted mantle, DM), and taking an average K2O content in the DM of 72 ppm, the following average contents were estimated for the DM: 158 ppm H2O, 6.6 ppm Cl, and 8.3 ppm F. Using an S/Dy ratio of 212 for MORB melts and a Dy concentration of 0.531 ppm in the DM, the concentration of S in the DM was estimated as 113 ppm. Our value for the average content of Cl is much higher than estimates obtained by other authors. This discrepancy could be due either to the assimilation of crustal (and hydrospheric) Cl by MORB magmas or to the deep mantle recycling of Cl. The latter mechanism is supported by the statistically significant positive correlation of Cl with K2O, H2O, and F. Such a correlation is not consistent with the hypothesis of basaltic magma contamination by seawater-derived chloride brines. Similar to other surface processes, the assimilation of crustal material operates within the existing global correlations and disturbs them. Based on the average integrated degree of mantle melting and the average degree of MORB magma differentiation (0.05), the average contents of potassium and volatile components in N-MORB and E-MORB mantle sources were estimated as 39 and 126 ppm K2O, 103 and 197 ppm H2O, 4.0 and 10.7 ppm Cl, and 3.9 and 9.1 ppm F, respectively. It is not likely that normal MORB magmas can be derived from depleted mantle that experienced a previous partial melting event (for instance, during the extraction of the primordial continental crust in the Early Precambrian), which was referred to as the ultradepleted mantle. Ordinary (not ultradepleted) MORB magmas can be derived either by the melting of a zone enriched DM (for instance, progressively enriched in incompatible components with depth), which is hardly possible, or by the continuous addition (mixing) of an enriched component to the ultradepleted mantle at the expense of sediments and crustal materials involved in deep recycling.  相似文献   

4.
New H2O, CO2 and S concentration data for basaltic glasses fromLoihi seamount, Hawaii, allow us to model degassing, assimilation,and the distribution of major volatiles within and around theHawaiian plume. Degassing and assimilation have affected CO2and Cl but not H2O concentrations in most Loihi glasses. Waterconcentrations relative to similarly incompatible elements inHawaiian submarine magmas are depleted (Loihi), equivalent (Kilauea,North Arch, Kauai–Oahu), or enriched (South Arch). H2O/Ceratios are uncorrelated with major element composition or extentor depth of melting, but are related to position relative tothe Hawaiian plume and mantle source region composition, consistentwith a zoned plume model. In front of the plume core, overlyingmantle is metasomatized by hydrous partial melts derived fromthe Hawaiian plume. Downstream from the plume core, lavas tapa depleted source region with H2O/Ce similar to enriched Pacificmid-ocean ridge basalt. Within the plume core, mantle components,thought to represent subducted oceanic lithosphere, have waterenrichments equivalent to (KEA) or less than (KOO) that of Ce.Lower H2O/Ce in the KOO component may reflect efficient dehydrationof the subducting oceanic crust and sediments during recyclinginto the deep mantle. KEY WORDS: basalt; Hawaii; mantle; plumes; volatiles  相似文献   

5.
Studies of the mantle-derived iherzolites from Nushan show that in addition to CO2,there were present H2O and small amounts of CO, CH4, SO2,Cl and F in the initial mantlc fluids derived fron the asthenospheric mantlc plumc .The imitial fluids accumulated in some regions of the mantle, resulting in lowering of the mantle solidus (and liquidus) and partial melting of the upper mantle. Melts formed from low-degree of fluid-involved partial melting of the upper mantle would be highly enriched in incompatible elements.Fluies and melts are allthe metasomatic agents for mantle metasomatism, and the interaction between them and the depleted mantle could result in the substan-tial local enrichment of LREE and incompatible elements in the latter.In case that the concentration of H2O in the fluids (and melts) is lower ,only cryptic metasomatism would occur, in case that the concentration of H2O is higher,the degree of partial melting would be higher and hydrous metasomatic phases(e.g. amphiboles )would nucleate. Under such circumstances, there would occur model metasomatism.  相似文献   

6.
Based on the generalization of data on melt inclusions and quenched glasses, the average compositions of subduction (island arc and active continental margin settings) basic magmas were estimated. The main geochemical features of the average composition of these magmas are significant depletion in Nb and Ta, less significant depletion in Ti, Zr, and Sm, and enrichment in Cl, H2O, F, and P in the primitive mantlenormalized patterns. The average normalized contents of moderately incompatible HREE in these magmas are close to those in the basic magmas of other geodynamic settings. Subduction basic magmas exhibit negative correlation of Li, Y, Dy, Er, Yb, Lu, and Ti contents with MgO content. Most of incompatible elements (Nb, Ta, U, Th, LREE) do not correlate with MgO, but correlate with each other and K2O. Variations in element contents are related to crystallization differentiation, magma mixing, and possibly, participation of several sources. The water content in the island arc basic magmas varies from almost zero value to more than 6 wt %. Most compositions are characterized by weak negative correlation between H2O and MgO contents, but some compositions define a negative correlation close to that in magmas of mid-ocean ridges (MOR). Considered magmas demonstrate distinct positive correlation between MgO content and homogenization temperature, practically coinciding with that of MOR magmas. Modeling of phase equilibria revealed widening of crystallization field of olivine in the magmas of subduction zones compared to MOR magmas. This can be related to the high water content in subduction magmas. Simultaneous liquidus crystallization of olivine and clinopyroxene in subduction magmas occurs at pressure approximately 5 kbar higher than that of MOR magmas. Based on the average ratios of trace element to K2O content, we determined the average compositions for subduction magma sources. Relative to depleted mantle, they are enriched in all incompatible elements, with positive anomalies of U, Rb, Ba, B, Pb, Cl, H2O, F, and S, and negative anomalies of Th, K, Be, Nb, Ta, Li, Nd, Pb, and Ti. A general elevated content of incompatible elements indicates a reworking of the rocks of mantle wedge by fluids and melts that were released from the upper layers of subducted plate.  相似文献   

7.
Clinopyroxene phenocrysts in fergusite from a diatreme in the Dunkel’dyk potassic alkaline complex in the southeastern Pamirs, Tajikistan, and from carbonate veinlets cutting across this rock contain syngenetic carbonate, silicate, and complex melt inclusions. The homogenization of the silicate and carbonate material of the inclusions with the complete dissolution of daughter crystalline phases and fluid in each of them occur simultaneously at 1150?1180°C. The pressures estimated using fluid inclusions and mineral geobarometers were 0.5–0.7 GPa. The behavior of the inclusions during their heating and their geochemistry are in good agreement with the origin of carbonate melts via liquid immiscibility. Carbonatite magma was segregated at the preservation of volatile components (H2O, CO2, F, Cl, and S) in the melt, and this resulted in the crystallization of H2O-rich minerals and carbonates and testifies that the magma was not intensely degassed during its ascent to the surface. The silicate melts are rich in alkalis (up to 4 wt % Na2O and 12 wt % K2O), H2O, F, Cl, and REE (up to 1000 ppm), LREE, Ba, Th, U, Li, B, and Be. The diagrams of the concentrations of incompatible elements of these rocks typically show deep Nb, Ta, and Ti minima, a fact making them similar to the unusual type of ultrapotassic magmas: lamproites of the Mediterranean type. These magmas are thought to be generated in relation to subduction processes, first of all, the fluid transport of various components from a down-going continental crustal slab into overlying levels of the mantle wedge, from which ultrapotassic magmas are presumably derived.  相似文献   

8.
We have performed phase equilibrium experiments in the system forsterite–enstatite–pyrope-H2O with MgCl2 or MgF2 at 1,100 °C and 2.6 GPa to constrain the solubility of halogens in the peridotite mineral assemblage and the fluid–mineral partition coefficients. The chlorine solubility in forsterite, enstatite and in pyrope is very low, 2.1–3.9 and 4.0–11.4 ppm, respectively, and it is independent of the fluid salinity (0.3–30 wt% Cl), suggesting that some intrinsic saturation limit in the crystal is reached already at very low chlorine concentrations. Chlorine is therefore exceedingly incompatible in upper-mantle minerals. The fluorine solubility is 170–336 ppm in enstatite and 510–1,110 ppm in pyrope, again independent of fluid salinity. Forsterite dissolves 1,750–1,900 ppm up to a fluid salinity of 1.6 wt% F. At higher fluorine contents in the system, forsterite is replaced by the minerals of the humite group. The lower solubility of chlorine by three orders of magnitude when compared to fluorine is consistent with increasing lattice strain. Fluid–mineral partition coefficients are 100–102 for fluorine and 103–105 for chlorine. Since the latter values are orders of magnitude higher than those for hydroxyl partitioning, fluid flow from the subducting slab through the mantle wedge will lead to an efficient sequestration of H2O into the nominally anhydrous minerals in the wedge, whereas chlorine becomes enriched in the residual fluid. Simple mass balance calculations reveal that rock–fluid ratios of up to >3,000 are required to produce the elevated Cl/H2O ratios observed in some primitive arc magmas. Accordingly, fluid flow from the subducted slab into the zone of melting in the mantle wedge does not only occur rapidly in narrow channels, but at least in some subduction zones, fluid pervasively infiltrates the mantle peridotite and interacts with a large volume of the mantle wedge. Together with the Cl/H2O ratios of primitive arc magmas, our data therefore constrain the fluid flow regime below volcanic arcs.  相似文献   

9.
Chlorine in submarine volcanic glasses from the eastern manus basin   总被引：4，自引：0，他引：4  
Submarine volcanic glasses from the eastern Manus Basin of Papua New Guinea, ranging from basalt to rhyodacite, clarify the geochemical behavior of Cl in arc-type magmas. For the Manus samples, Cl is well correlated with non-volatile highly incompatible trace elements, suggesting it was not highly volatile and discounting significant seawater contamination. The Cl partition coefficient is close to but slightly lower than that of Nb and K2O, a behavior similar to that in mid-ocean ridge basalts (MORB) and ocean island basalts (OIB). The similar incompatibilities of Cl and Nb imply that the Cl/Nb values of the eastern Manus Basin glasses reflect their magma source. For glasses from other west Pacific back-arc basins, Cl/Nb, Ba/Nb, and U/Nb increase towards the subduction trench, indicating increased contribution of a component enriched in Cl, Ba, and U, likely from subduction-released slab fluids. It is estimate that ∼80% of the Cl in the Manus arc-type glasses was added directly from subducted slab-derived fluids. We have also modeled Cl behavior during magma evolution in general. Our results show that the behavior of Cl in magma is strongly influenced by pressure, initial H2O content, and the degree of magmatic fractionation. At early stages of magmatic evolution, for magmas with initial H2O content of <4.0 wt%, Cl is highly incompatible under all pressures. By contrast, for more evolved magmas at moderately high pressure and high H2O contents, considerable amounts of Cl can be extracted from the magma once H2O saturation is reached. Accordingly, Cl is usually highly incompatible in MORB and OIB because of their low H2O contents and relatively low degrees of fractional crystallization. The behavior of Cl in arc magmas is more complicated, ranging from highly incompatible to compatible depending on H2O content and depth of magma chambers. The behavior of Cl in the eastern Manus Basin magmas is consistent with low H2O contents (1.1-1.7 wt%) and evolution at low pressures (<0.1 GPa). Modeling results also indicate that Cl will behave differently in intrusive rocks compared to volcanic rocks because of the different pressures involved. This may have a strong influence on the mechanisms of ore genesis in these two tectonic settings.  相似文献   

10.
WALLACE  PAUL J. 《Journal of Petrology》2002,43(7):1311-1326
Submarine pillow basalts (34 Ma) recovered from the NorthernKerguelen Plateau at ODP Site 1140 contain abundant unalteredglass, providing the first opportunity to measure the volatilecontents of tholeiitic basaltic magmas related to the Kerguelenmantle plume. The glasses have La/Sm and Nb/Zr ratios that varyfrom values similar to Southeast Indian Ridge (SEIR) MORB (Unit1), to slightly more enriched (Unit 6), to values transitionalbetween SEIR MORB and basaltic magmas formed by melting of theKerguelen plume (Units 2 and 3). Volatile contents for glassesin Units 1 and 6 are similar to depleted mid-ocean ridge basalt(MORB) values (0·25–0·27 wt % H2O, 1240–1450ppm S, 42–54 ppm Cl). In contrast, H2O contents are higherfor the enriched glasses (Unit 2, 0·44 wt % H2O; Unit3, 0·69 wt %), as are S (1500 ppm) and Cl (146–206ppm). Cl/K ratios for all glasses are relatively low (0·03–0·04),indicating that assimilation of hydrothermally altered materialdid not occur during shallow-level crystallization. H2O/Ce forthe enriched glasses (Units 2 and 3) is significantly lowerthan Pacific and South Atlantic MORB values, suggesting thatlow H2O/Ce may be an inherent characteristic of the Kerguelenplume source. Vapor saturation pressures calculated using theH2O and CO2 contents of the glasses indicate that  相似文献   

11.
Our database of published contents of volatile, major, and trace elements in melt inclusions in minerals and quenched glasses of volcanic rocks was used to calculate the mean compositions of alkaline and subalkaline melts of ocean islands. The data array included ~10300 determinations from more than 200 publications. The alkaline basic melts (mean Na2O + K2O is 4.75 wt %) are strongly enriched compared with the subalkaline melts (mean Na2O + K2O is 2.70 wt %) in volatile components (0.96 and 0.37 wt % H2O, 650 and 190 ppm Cl, 1480 and 320 ppm F, and 930 and 530 ppm S, respectively) and many trace elements. For instance, the alkaline and subalkaline melts contain 31.8 and 7.2 ppm Rb, 50.1 and 9.6 ppm Nb, and 39.9 and 5.7 ppm La, respectively. Such relations were not observed for V, Cr, Co, Cu, Ga, and Sc. As to the major elements, the alkaline melts show significantly higher contents of Ti, Fe, and P, but lower contents of Si and Mg compared with the subalkaline melts. The enrichment of the alkaline melts in many trace elements compared with the subalkaline melts is retained also in silicic melts. The distribution of trace elements suggests a higher contribution of pyroxenite material during the formation of alkaline melts.  相似文献   

12.
Major and trace elements and water contents were analyzed in 16 peridotite xenoliths embedded by the Cenozoic basalts in Pingnan (southeastern Guangxi Province), to constrain the chemical composition and evolution of the lithospheric mantle located in the central part of the South China Block (SCB). The peridotites are mainly moderately refractory harzburgites and lherzolites (Mg#-Ol?=?90.3–91.7) and minor fertile lherzolites (Mg#-Ol?=?88.9–89.9). Clinopyroxenes in the peridotites show LREE-depleted pattern, and commonly exhibit negative anomalies in Nb and Ti, suggesting the peridotites probably represent residues after 1–10% of partial melting without significant mantle metasomatism. Water contents range from 146 to 237 ppm wt. H2O in clinopyroxene, and from 65 to 112 ppm wt. H2O, in orthopyroxene but are below detection limit (2 ppm wt. H2O) in olivine. Calculated bulk water contents, based on the mineral modes and partition coefficient, range from 14 to 83 ppm wt. H2O (average 59 ppm wt. H2O). There is a correlation between melting indices (such as Mg#-Ol, Ybn in clinopyroxene) and water contents in clinopyroxene and orthopyroxene, but no correlation is observed between the whole-rock water contents and the redox state (Fe3+/∑Fe ratios in spinel), suggesting that water contents in the peridotites are mainly controlled by the degree of partial melting rather than by oxygen fugacity. The lithospheric mantle beneath the interior of the SCB may not be compositionally stratified; fertile and moderately refractory mantle coexist at the similar depths. Geochemical data and water contents of the studied peridotites are similar to the proposed MORB source and indicate that the ancient refractory lithospheric mantle was irregularly eroded or reacted by the upwelling asthenosphere, and eventually replaced by juvenile fertile accreted mantle through the cooling of the asthenosphere.  相似文献   

13.
Major oxide, trace element and volatile (H2O, CO2, S, F, and Cl) compositions have been analyzed for olivine-hosted melt inclusions in eight basalt samples from Yellowstone National Park and the Snake River Plain (SRP) to identify the least differentiated melt compositions and assess the volatile budget of the Yellowstone hotspot. Melt-inclusion chemistry was evaluated to understand potential overprinting effects in the shallow mantle and crust of magmas derived from deeper levels. Maximum water concentrations of 3.3 wt% and CO2 up to 1,677 ppm have been observed in olivine-hosted melt inclusions from the Gerritt Basalts at Mesa Falls, Idaho (SRP region), which is significantly higher than the maximum concentrations measured in lavas from other hotspots such as Hawaii (~0.8–0.9 wt%). Maximum water concentrations were generally observed in the least differentiated melt inclusions in terms of incompatible major oxide concentrations, indicating that high water concentrations are characteristic of the mantle or perhaps lower crust rather than resulting from differentiation enhancement within the shallow crust, even taking into account the fact that water behaves as an incompatible element during crystal fractionation. Enrichment in Ba coupled with depletion in Th in many of the melt inclusions and their host rocks is a characteristic of many arc lavas and may indicate that volatiles in Yellowstone-Snake River Plain basalts could have a subduction zone origin.  相似文献   

14.
We studied the systematics of Cl, F and H2O in Izu arc front volcanic rocks using basaltic through rhyolitic glass shards and melt inclusions (Izu glasses) from Oligocene to Quaternary distal fallout tephra. These glasses are low-K basalts to rhyolites that are equivalent to the Quaternary lavas of the Izu arc front (Izu VF). Most of the Izu glasses have Cl ∼400-4000 ppm and F ∼70-400 ppm (normal-group glasses). Rare andesitic melt inclusions (halogen-rich andesites; HRA) have very high abundances of Cl (∼6600-8600 ppm) and F (∼780-910 ppm), but their contents of incompatible large ion lithophile elements (LILE) are similar to the normal-group glasses. The preeruptive H2O of basalt to andesite melt inclusions in plagioclase is estimated to range from ∼2 to ∼10 wt% H2O. The Izu magmas should be undersaturated in H2O and the halogens at their preferred levels of crystallization in the middle to lower crust (∼3 to ∼11 kbar, ∼820° to ∼1200°C). A substantial portion of the original H2O is lost due to degassing during the final ascent to surface. By contrast, halogen loss is minor, except for loss of Cl from siliceous dacitic and rhyolitic compositions. The behavior of Cl, F and H2O in undegassed melts resembles the fluid mobile LILE (e.g.; K, Rb, Cs, Ba, U, Pb, Li). Most of the Cl (>99%), H2O (>95%) and F (>53%) in the Izu VF melts appear to originate from the subducting slab. At arc front depths, the slab fluid contains Cl = 0.94 ± 0.25 wt%, F = 990 ± 270 ppm and H2O = 25 ± 7 wt%. If the subducting sediment and the altered basaltic crust were the only slab sources, then the subducted Cl appears to be almost entirely recycled at the Izu arc (∼77-129%). Conversely, H2O (∼13-22% recycled at arc) and F (∼4-6% recycled) must be either lost during shallow subduction or retained in the slab to greater depths. If a seawater-impregnated serpentinite layer below the basaltic crust were an additional source of Cl and H2O, the calculated percentage of Cl and H2O recycled at arc would be lower. Extrapolating the Izu data to the total length of global arcs (∼37,000 km), the global arc outflux of fluid-recycled Cl and H2O at subduction zones amounts to Cl ∼2.9-3.8 × 1012 g/yr and H2O ∼0.7-1.0 × 1014 g/yr, respectively—comparable to previous estimates. Further, we obtain a first estimate of global arc outflux of fluid-recycled F of ∼0.3-0.4 × 1012g/yr. Despite the inherent uncertainties, our results support models suggesting that the slab becomes strongly depleted in Cl and H2O in subduction zones. In contrast, much of the subducted F appears to be returned to the deep mantle, implying efficient fractionation of Cl and H2O from F during the subduction process. However, if slab devolatilization produces slab fluids with high Cl/F (∼9.5), slab melting will still produce components with low Cl/F ratios (∼0.9), similar to those characteristic of the upper continental crust (Cl/F ∼0.3-0.9).  相似文献   

15.
Major and trace element compositions were obtained for bulk rocks and melt inclusions hosted in olivine crystals (Fo > 85) from the adventive cones of the Piton de La Fournaise volcano (La Réunion Island). Ratios of highly incompatible trace elements for these magmas are used to identify the nature of the La Réunion mantle plume source. Although adventive cone lavas display unusual major element compositions compared to the historical lavas of the volcano (e.g., lower CaO/Al2O3), trace element data suggest that the magmas emitted by the adventive cones originate from a common chemical source. This source may correspond to either a homogeneous mixed source of different mantle components or a near-primitive less-differentiated mantle source. The melt inclusions display ratios of highly incompatible elements (e.g., Th/La, Nb/La) which are similar to primitive mantle values, and lower Nb/U ratios compared to most oceanic basalts. These results and previous isotopic and trace element data suggest that La Réunion plume samples a source which is intermediate between a primitive-like mantle domain and a slightly depleted one almost unaffected by the recycling processes. This source could have originated from early depletion of the primitive mantle. Assuming a depletion 4.45 Gyr ago, ~10% melting of this slightly depleted source could explain the enriched trace element concentrations of the melt inclusions.  相似文献   

16.
Assessment of the isotope systematics and the magmatotectonic history of mainly Cenozoic igneous rocks from Italy shows them to be inconsistent with subduction-related magmatism. We attempt to fit these data into an alternative model involving long-term, recurrent plume activity that extended over a period of about 100 Ma, that involved mantle expansion and subsequent mixing between isotopically-distinct, mantle components. Sr, Nd and Pb isotopic compositions of Cenozoic Italian igneous rocks, rather than being random, reflect binary mixing involving a common end-member similar to FOZO. Most isotopic data from along the entire length of Italy, from the Aeolian Islands to the Alpine belt, define a Main Italian Radiogenic Trend (MIRT), characterized by mixing between FOZO and a highly radiogenic Sr, mantle end-member (ITEM, ITalian Enriched Mantle). Data from the Adria foreland, Sicily and the south-western Tyrrhenian Sea and Sardinia deviate from MIRT suggesting mixing with other components, perhaps HIMU and EM1. Both the absence of pure DMM, and the presence of isotopic end-members not recognized in present-day consuming-plate margins are incompatible with subduction-related models. Two models are discussed, one in which ITEM is attributed to melting of pre-Alpine sediments/upper continental crust entrained in a FOZO-like mantle and the other to widespread metasomatic activity involving deep-seated plume activity. In the latter, the widespread nature of FOZO is attributed to a late Triassic–early Jurassic plume that preceded the opening of the Alpine Tethys and led to modification of the lithosphere and/or asthenosphere. Late Jurassic–early Cretaceous plume activity produced mantle expansion and the opening of the Alpine Tethys. A new phase of plume activity started during the Oligocene with the opening of the western and central Mediterranean Basins. Stretching and large-scale extension of the Mediterranean lithosphere was caused by the progressive eastward growth and volume increase of a plume head trapped within the Transition Zone. Plume-generated fluids/melts enriched in K–Ca–CO2–H2O, produced mantle sources capable of generating widespread alkaline, mafic, and carbonatitic magmatism. Lithospheric unloading controlled the Tyrrhenian and peri-Tyrrhenian magmatic activity.  相似文献   

17.
《地学前缘(英文版)》2020,11(6):1953-1973
The South Mid-Atlantic Ridge (SMAR) 19°S segment, approximately located along the line of Saint Helena volcanic chain (created by Saint Helena mantle plume), is an ideal place to investigate the issue whether the ridge-hotpot interaction process affected the whole MAR. In this study, we present major and trace elemental compositions and Sr-Nd-Pb isotopic ratios of twenty fresh lava samples concentrated in a relatively small area in the SMAR 19°S segment. Major oxides compositions show that all samples are tholeiite. Low contents of compatible trace elements (e.g., Ni ​= ​239–594 ​ppm and Cr ​= ​456–1010 ​ppm) and low Fe/Mn (54–67) and Ce/Yb (0.65–1.5) ratios of these lavas show that their parental magmas are partially melted by a spinel lherzolite mantle source. Using software PRIMELT3, this study obtained mantle potential temperatures (Tp) beneath the segment of 1321–1348 ​°C, which is lower relative to those ridges influenced by mantle plumes. The asthenospheric mantle beneath the SMAR 19°S segment starts melting at a depth of ~63 ​km and ceases melting at ~43 ​km with a final melting temperature of ~1265 ​°C. The extent of partial melting is up to 16%–17.6% with an average adiabatic decompression value of 2.6%/kbar. The correlations of major oxides (CaO/Al2O3) and trace elements (Cr, Co, V) with MgO and Zr show that the parental magma experienced olivine and plagioclase fractional crystallization during its ascent to the surface.87Sr/86Sr (0.702398–0.702996), 143Nd/144Nd (0.513017–0.513177) and 206Pb/204Pb (18.444–19.477) ratios of these lavas indicate the mantle source beneath the SMAR 19°S segment is composed of a three-component mixture of depleted MORB mantle, PREMA mantle, and HIMU mantle materials. The simple, binary mixing results among components from plume-free SMAR MORB, Saint Helena plume and Tristan plume show that asthenospheric mantle beneath the SMAR 19°S segment may be polluted by both Saint Helena and Tristan plume enriched materials. The abovementioned mantle potential temperatures, together with the low Saint Helena (<10%) and Tristan (<5%) components remaining in the asthenospheric mantle at present, show that the physically ridge-hotspot interactions at SMAR 19°S segment may have ceased. However, the trace element and Sr-Nd-Pb isotopically binary mixing calculation results imply that these lavas tapped some enriched pockets left when Saint Helena and/or Tristan plume were once on the SMAR during earlier Atlantic rifted history.  相似文献   

18.
Data obtained on lamprophyres from the carbonatite–volcanic unit in the lower horizon of the Tomtor Massif indicate that the rocks and zoned diopside and kaersutite phenocrysts in them are enriched in incompatible elements more significantly than is typical of alkaline ultramafic rocks of the Maymecha–Kotui and Kola provinces. The concentrations of these elements and their indicator ratios in the cores and intermediate zones of the diopside and kaersutite phenocrysts significantly vary, and this suggests that the minerals might have crystallized from different melts. This is consistent with the earlier conclusions, which were derived from studying melt inclusions, that the phenocrysts crystallized from mixing alkaline mafic melts of sodic and potassic types and different Mg–number which were enriched in the carbonatite component. The cores of the diopside phenocrysts started to crystallize from sodic mafic magma in a magmatic chamber, while the intermediate and outermost zones of this mineral crystallized from mixed sodic–potassic mafic melts. The carbonatite component was separated from the sodic mafic melt at high temperature (>1150°C) during diopside core crystallization. The bulk compositions of the alkaline lamprophyres and of the diopside and kaersutite phenocrysts contain lower normalized concentrations of HREE than LREE. This led us to conclude that the parental sodic and potassic mafic melts were derived from an enriched mantle source material under garnet–facies parameters, as is typical of continental rifts. It is noteworthy that the potassic mafic melt was derived at greater depths and lower degrees of melting of the mantle source than the sodic melt. The iron–rich sodic melt from which the cores of the diopside phenocrysts started to crystallize was enriched in V, REE, Y, and volatile components (H2O, CO2, F, Cl, and S). The onset of carbonate–silicate liquid immiscibility was marked by the redistribution of REE and Y into the carbonatite melt. The potassic, more Mg–rich mafic melt from which the intermediate and outermost zones of the diopside phenocrysts crystallized was enriched in Ti, Nb, Zr, and REE and always remained homogeneous when this mineral crystallized.  相似文献   

19.
We compiled a database containing more than 480000 determinations for 73 elements in melt inclusions in minerals and quenched glasses of volcanic rocks. These data were used to estimate the mean contents of major, volatile, and trace elements in igneous melts from main geodynamic settings. The following settings were distinguished: (I) oceanic spreading zones (mid-ocean ridges); (II) zones of mantle plume activity on oceanic plates (oceanic islands and plateaus); (III) and (IV) settings related to subduction processes, including (III) zones of island-arc magmatism generated on the oceanic crust and (IV) magmatic zones of active continental margins involving the continental crust into magma generation processes; (V) intracontinental rifts and continental hot spots; and (VI) back-arc spreading centers. The histogram of SiO2 contents in the natural igneous melts of all geodynamic settings exhibits a bimodal distribution with two maxima at SiO2 contents of 50–52 wt % and 72–74 wt %. The range 62–64 wt % SiO2 comprises the minimum number of determinations. Primitive mantle-normalized spidergrams were constructed for average contents of elements in the igneous melts of basic, intermediate, and acidic compositions from settings I–V. The diagrams reflect the characteristic features of melt compositions for each geodynamic setting. On the basis of the analysis of data on the composition of melt inclusions and glasses of rocks, average ratios of incompatible trace and volatile components (H2O/Ce, K2O/Cl, Nb/U, Ba/Rb, Ce/Pb, etc.) were estimated for the igneous melts of all of the settings. Variations of these ratios were determined, and it was shown that, in most cases, the ratios of incompatible elements are significantly different between settings. The difference is especially pronounced for the ratios of elements with different degrees of incompatibility (e.g., Nb/Yb) and for some ratios with volatile components (e.g., K2O/H2O).  相似文献   

20.
The mass of volatiles emitted during volcanic eruptions is often estimated by comparing the volatile contents of undegassed melt inclusions, trapped in crystals at an early stage of magmatic evolution, with that of the degassed matrix glass. Here we present detailed characterisation of magmatic volatiles (H2O, CO2, S, Fl and Cl) of crystal-hosted melt and fluid inclusions from the 2014–2015 Holuhraun eruption of the Bárðarbunga volcanic system, Iceland. Based on the ratios of magmatic volatiles to similarly incompatible trace elements, the undegassed primary volatile contents of the Holuhraun parental melt are estimated at 1500–1700 ppm CO2, 0.13–0.16 wt% H2O, 60–80 ppm Cl, 130–240 ppm F and 500–800 ppm S. High-density fluid inclusions indicate onset of crystallisation at pressures?≥?0.4 GPa (~?12 km depth) promoting deep degassing of CO2. Prior to the onset of degassing, the melt CO2 content may have reached 3000–4000 ppm, with the total magmatic CO2 budget estimated at  23–55 Mt. SO2 release commenced at 0.12 GPa (~?3.6 km depth), eventually leading to entrapment of SO2 vapour in low-density fluid inclusions. We calculate the syn-eruptive volatile release as 22.2 Mt of magmatic H2O, 5.9–7.7 Mt CO2, and 11.3 Mt of SO2 over the course of the eruption; F and Cl release were insignificant. Melt inclusion constraints on syn-eruptive volatile release are similar to estimates made during in situ field monitoring, with the exception of H2O, where field measurements may be heavily biased by the incorporation of meteoric water.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号