共查询到20条相似文献，搜索用时 46 毫秒
1.
2.
A new energy density calculation method for reservoir delineation using seismic low-frequency signal
Xin Luo Xuehua Chen Yingkai Qi Jidong Yang Jie Zhang Wei Jiang 《Geophysical Prospecting》2020,68(8):2518-2535
In comparison to high-frequency signals, low-frequency seismic signals suffer less from scattering and intrinsic attenuation during wave propagation, penetrate deeper strata and thus can provide more energy information related to the hydrocarbon reservoirs. Based on the asymptotic representation for the frequency-dependent reflections in the fluid-saturated pore-elastic media, we first derive a novel equation of the reservoir energy density and present an efficient workflow to calculate the reservoir energy density using low-frequency seismic data. Then, within a low-frequency range (from 1 to 30 Hz), we construct an objective function to determine the optimal frequency, using the energy densities calculated from the post-stack seismic traces close to the wells. Next, we can calculate the reservoir energy density using the instantaneous spectra of optimal frequency at the low-frequency end of the seismic spectrum. Tests on examples for synthetic and field data demonstrate that the proposed reservoir energy density can produce high-quality images for the fluid-saturated reservoirs, and it produces less background artefacts caused by elastic layers. This method provides a new way to detect the location of hydrocarbon reservoirs and characterize their spatial distribution. 相似文献
3.
基于地震波传播过程中能量衰减的物理机制理论分析,通过梳理已有研究成果,采用正弦函数分频、最小二乘法高阶e指数曲线拟合等技术研发了可实现时间、频率、炮检距和炮域内地震波4D球面扩散与大地吸收衰减补偿方法,解决了常规振幅补偿无法补偿振幅随频率衰减和剩余补偿的问题。实际地震资料处理结果表明,相较于常规振幅补偿方法,该方法可更准确地对球面扩散和大地吸收造成的地震波衰减进行自适应拟合与补偿,较好的恢复中、高频信号成分,提高主频,拓宽频带,有效提高成像分辨率,并较好地保持了振幅的相对关系。 相似文献
4.
时频峰值滤波(TFPF)算法是一种非常有效的去噪方法.但是传统的TFPF采用的单一窗长,并且仅沿时间方向进行滤波,忽略了信号的空间信息,并且TFPF近似等效成一个时不变的低通滤波器,不能追踪快速变化的信号.针对这些问题,引入空间局部加权回归自适应TFPF(SLWR-ATFPF).鉴于随机噪声在各个位置的方向随机性,以及有效信号在各个位置的方向确定性,首先利用空间局部加权回归(SLWR),对含噪信号进行空间加权,从而使加权之后的信号包含空间信息.然后,再引入凸集和Viterbi的思想,对空间加权之后的信号进行自适应滤波.从而,完成时空域二维自适应滤波.将SLWR-ATFPF应用于合成记录和实际的共炮点记录,实验结果表明,改进的方法与原算法相比,能够在压制低信噪比(SNR)随机噪声的同时更好地保留有效信号. 相似文献
5.
在深反射地震资料处理中,当来自深部的有效弱信号和噪声干扰频带差异较小且难以区分时,传统滤波方法的应用会受到限制.谱分解方法是一种使用离散傅里叶变换,基于信号的频率-振幅谱等信息生成高分辨率地震图像的方法,通常用来识别介质物性横向分布特征,处理复杂介质内频谱变化和局部相位的不稳定性等问题,包括定位复杂断层和小尺度断裂等.S变换作为一种新的时频分析方法,具有自动调节分辨率的能力,近些年来被广泛应用到勘探地震、大地电磁等数据处理中,逐渐成为地球物理方法中噪声压制的有效方法之一.与常规石油反射地震资料相比,深反射主动源地震为了探测深部结构信息,常采用大药量激发方式、长排列观测系统等,导致深部有效信号基本湮灭在噪声干扰之中.针对深反射数据特点,本文结合谱分解和S变换技术,首先设计了简单的脉冲函数实验数据,证实S变换方法的有效性,同时说明谱分解方法的效果受所用时频分析方法影响较大,而其中决定分辨能力的变换窗函数的选取尤为重要.在此基础上,分别应用到深反射地震资料的单道和叠加剖面实际数据上,对比分析了传统变换谱分解和S变换谱分解的应用效果,单道资料对比结果表明:相比传统谱分解,S变换谱分解方法具有自动调节分辨率的能力,能够精确的标定深反射地震资料中弱信号不同时刻的频率分量;叠加剖面资料应用结果表明:由S变换谱分解得到的剖面结果与其他谱分解方法结果整体上具有较高的一致性,同时清晰地刻画出原叠加剖面上被噪声湮灭的低频细节特征,提高了剖面的分辨率及同相轴连续性;对比结果明显看出,Gabor变换谱分解方法得到的结果同相轴较为破碎,分析原因认为这是由Gabor变换的时频分解方法的定长窗函数所致,窗口大小不会随着信号频率的变化来调节长度,只能在处理的过程中根据一定的记录长度范围选取窗函数参数,而S变换谱分解方法在窗函数的选取时,通过时变信号的局部频率特征自动调节窗口长度,能够更好的刻画各个频段的细节特征,在深反射剖面成像应用中效果尤为明显.本文结果表明S变换谱分解技术在深地震叠加剖面上的应用有效地提高了来自深部弱反射信号的信噪比和分辨率,并刻画出了叠加剖面上所不具有的低频细节特征,在实际深反射地震资料处理中能有效保护低频弱信号获得更好的成像效果.本文为深地震反射资料中弱信号的保护处理找到一种有效的方法. 相似文献
6.
地震低频伴影的数值模拟与应用 总被引：11，自引：2，他引：9
Strong low-frequency energy beneath a hydrocarbon reservoir is called a seismic low-frequency shadow and can be used as a hydrocarbon indicator （Tarter et al., 1979） bu the physical mechanism of the observed low-frequency shadow is still unclear. To stud） the mechanism, we performed seismic numerical simulation of geological models with a hydrocarbon-bearing zone using the 2-D diffusive-viscous wave equation which car effectively model the characteristics of velocity dispersion and transform the seismic dat~ centered in a target layer slice within a time window to the time-frequency domain by usinl time-frequency signal analysis and sort the frequency gathers to common frequency cubes. Then, we observe the characteristics of the seismic low-frequency shadow in the common frequency cubes. The numerical simulations reveal that the main mechanism of seismic lowfrequency shadows is attributed to high attenuation of the medium to high seismic frequency components caused by absorption in the hydrocarbon-filled reservoir. Results from a practical example of seismic low-frequency shadows show that it is possible to identify the reservoir by the low-frequency shadow with high S/N seismic data. 相似文献
7.
地层的Q吸收会造成地震波振幅衰减、相位畸变,分辨率和信噪比明显降低.反Q滤波可消除由于地层Q吸收造成的振幅衰减和相位畸变,从而提高地震资料的分辨率;但反Q滤波振幅补偿的数值不稳定性问题会严重降低地震资料的信噪比,并产生很多假象.截止频率法和稳定因子法反Q滤波振幅补偿方法虽可控制数值非稳定性问题,但振幅补偿函数的增益限为一个时不变的常数,且与地震数据动态范围无关,其经常会压制深层地震波的高频成分,反而降低地震资料的分辨率;因此,本文在研究截止频率法和稳定因子法的基础上,结合地震数据的动态范围对地震记录分辨率的影响,提出了一种自适应增益限的反Q滤波振幅补偿方法,其增益限和稳定因子都是时变的,且都自适应于地震数据有效频带的截止频率.合成数据和实际数据试算表明,本文的自适应增益限的反Q滤波方法可恢复地震信号有效频带范围内的能量,且能较好地控制数值非稳定性问题,最终获得高分辨率和高信噪比的地震数据. 相似文献
8.
Seismic attenuation compensation is a spectrum-broadening technique for enhancing the resolution of non-stationary seismic data. The single-trace attenuation compensation algorithms ignore the prior information that the seismic reflection events are generally continuous along seismic traces, thus, the compensated result may have poor spatial continuity and low signal-to-noise ratio. To address this problem, we extend the single-trace approaches to the multi-trace algorithms and furthermore propose a multi-trace attenuation compensation with a spatial constraint. The frequency-space prediction filters are the key to construct this spatial regularization. We test the effectiveness of the proposed spatially constrained attenuation compensation algorithm by applying both synthetic and field data examples. Synthetic data tests indicate that the proposed multi-trace attenuation compensation approach can provide a better compensated result than single-trace attenuation compensation algorithm in terms of suppressing noise amplification and guaranteeing structural continuities. Field data applications further confirm its stability and practicality to improve seismic resolution. 相似文献
9.
10.
Jun Feng Bingxue Zhu Wei Li Hui Chen Bin Zhou Shi-hu Wu Ke Guo 《Geophysical Prospecting》2020,68(9):2665-2677
Preserving the structural and stratigraphic discontinuities or edges is essential in seismic data processing and interpretation. According to several numerical experiments, it is obvious that random noise has a constant spectral density, whereas the structural features vary significantly within different frequency bands, which means that the ratio between the densities of noise and structural features varies significantly in different frequency bands. Therefore, we propose a method called adaptive hybrid diffusion to attenuate random noise, which utilizes a novel adaptive frequency-based parameter. First, the adaptive hybrid diffusion method decomposes the seismic sections into several band-limited portions using variational mode decomposition. These portions are called intrinsic mode functions, in which noise and structural energy have distinct differences. Subsequently, utilizing the adaptive frequency-based parameter, each intrinsic mode function is divided into several monotonous portions that represent the noise or structural area. Afterwards, the total variation and L2 minimization algorithms are utilized separately to suppress the noise in different band-limited monotonous areas. The algorithms are chosen dynamically, as the portion changes with the change in the adaptive parameter. Finally, these denoised portions are combined to obtain the denoised seismic section. Experimental results on synthetic and field seismic data showed that seismic noise is effectively suppressed by the adaptive hybrid diffusion method, with the edge details of seismic events well preserved. 相似文献
11.
Ground roll waves interfere with seismic data. The suppression of ground roll waves based on the division of wavelet frequencies considers the low-frequency characteristics of ground roll waves. However, this method will not be effective when the ground roll wave and the effective signal have the same frequency bands because of overlapping. The radial trace transform (RTT) considers the apparent velocity difference between the effective signal and the ground roll wave to suppress the latter, but affects the low-frequency components of the former. This study proposes a ground roll wave suppression method by combining the wavelet frequency division and the RTT based on the difference between the ground roll wave velocity and the effective signal and their energy difference in the wavelet domain, thus making full use of the advantages of both methods. First, we decompose the seismic data into different frequency bands through wavelet transform. Second, the RTT and low-cut filtering are applied to the low-frequency band, where the ground roll waves are appearing. Third, we reconstruct the seismic record without ground roll waves by using the inverse RTT and the remaining frequency bands. The proposed method not only improves the ground roll wave suppression, but also protects the signal integrity. The numerical simulation and real seismic data processing results suggest that the proposed method has a strong ability to denoise while preserving the amplitude. 相似文献
12.
Attenuation in seismic wave propagation is a common cause for poor illumination of subsurface structures. Attempts to compensate for amplitude loss in seismic images by amplifying the wavefield may boost high‐frequency components, such as noise, and create undesirable imaging artefacts. In this paper, rather than amplifying the wavefield directly, we develop a stable compensation operator using stable division. The operator relies on a constant‐Q wave equation with decoupled fractional Laplacians and compensates for the full attenuation phenomena by performing wave extrapolation twice. This leads to two new imaging conditions to compensate for attenuation in reverse‐time migration. A time‐dependent imaging condition is derived by applying Q‐compensation in the frequency domain, whereas a time‐independent imaging condition is formed in the image space by calculating image normalisation weights. We demonstrate the feasibility and robustness of the proposed methods using three synthetic examples. We found that the proposed methods are capable of properly compensating for attenuation without amplifying high‐frequency noise in the data. 相似文献
13.
Random noise attenuation, preserving the events and weak features by improving signal‐to‐noise ratio and resolution of seismic data are the most important issues in geophysics. To achieve this objective, we proposed a novel seismic random noise attenuation method by building a compound algorithm. The proposed method combines sparsity prior regularization based on shearlet transform and anisotropic variational regularization. The anisotropic variational regularization which is based on the linear combination of weighted anisotropic total variation and anisotropic second‐order total variation attenuates noises while preserving the events of seismic data and it effectively avoids the fine‐scale artefacts due to shearlets from the restored seismic data. The proposed method is formulated as a convex optimization problem and the split Bregman iteration is applied to solve the optimization problem. To verify the effectiveness of the proposed method, we test it on several synthetic seismic datasets and real datasets. Compared with three methods (the linear combination of weighted anisotropic total variation and anisotropic second‐order total variation, shearlets and shearlet‐based weighted anisotropic total variation), the numerical experiments indicate that the proposed method attenuates random noises while alleviating artefact and preserving events and features of seismic data. The obtained result also confirms that the proposed method improves the signal‐to‐noise ratio. 相似文献
14.
在常规地震采集中,被动源地震波场往往被视为噪声而去除,这就造成了部分有用信息的丢失.在目标区进行主动源和被动源弹性波地震数据的多分量混合采集,并对两种数据进行联合应用,使其在照明和频带上优势互补,能显著提高成像和反演的质量.本文针对两种不同类型的主被动源混采地震数据,分别提出了相应的联合全波形反演方法.首先,针对主动源与瞬态被动源弹性波混采地震数据,为充分利用被动源对深部照明的优势,同时有效压制被动震源点附近的成像异常值,提出了基于动态随机组合的弹性波被动源照明补偿反演策略.然后,针对低频缺失主动源与背景噪声型被动源弹性波混采地震数据,为充分利用被动源波场携带的低频信息,并避免对被动源的定位和子波估计,提出了基于地震干涉与不依赖子波算法的弹性波主被动源串联反演策略.最后,分别将两种方法在Marmousi模型上进行反演测试.结果说明,综合利用主动源和被动源弹性波混采地震数据,不仅能增强深部弹性参数反演效果,还能更好地构建弹性参数模型的宏观结构,并有助于缓解常规弹性波全波形反演的跳周问题. 相似文献
15.
与深层致密岩石相比,相对疏松的近地表地层严重吸收了地震波的高频成分,降低了地震数据的分辨率和高频成分的信噪比。本文利用井中雷管激发、地面检波器接收的微测井直达波资料,通过分析近地表地层不同传播距离的地震直达波频谱信息差异,采用维纳滤波方法,进行近地表吸收补偿反滤波器的求取,将不同微测井测量点对应的近地表吸收补偿反滤波器应用于相应的叠前共检波点道集地震数据,完成了叠前地震数据的空变吸收衰减补偿,克服了叠后地震数据无法实现空变补偿的难题。叠前三维地震近地表吸收补偿后的数据,较补偿前地震数据的优势信噪比频带宽度明显拓宽,低频成分基本保持,反射信息量有较大程度增加,而且与合成记录吻合更好,能更好的满足地质解释的需要,提高解释精度。 相似文献
16.
高精度频率衰减分析技术及其应用(英文) 总被引：3，自引：1，他引：2
本文从含流体孔隙介质中的地震波场的衰减理论出发,对常规的频率衰减分析技术中的"低频阴影"和"频率衰减梯度"分析方法进行了改进,提出了一种高精度的频率衰减分析技术。首先,通过引入三参数小波变换和时频聚焦准则,发展了一种基于自适应三参数小波变换的高精度时频分析方法,其不仅具有很高的时—频分辨率(有利于"低频阴影"分析),而且其频谱只有一个峰,旁瓣比较小(有利于"频率衰减梯度"分析)。其次,采用基于最小二乘法的Nelder-Mead非线性算法对频谱的衰减部分进行拟合计算,可以准确地计算衰减系数,提高了"频率衰减梯度"的计算精度。实际资料的计算结果表明,本文提出的综合"低频阴影"和"频率衰减梯度"方法的频率衰减分析技术能够有效地圈定碳酸盐岩鲕滩储层的发育区域,且两种方法具有很好的一致性,有效地提高了储层预测的可靠性,从而降低了勘探风险。 相似文献
17.
Use of low frequencies for sub-basalt imaging 总被引：5，自引：1，他引：5
Anton Ziolkowski Peter Hanssen Robert Gatliff Helmut Jakubowicz rew Dobson Gary Hampson Xiang-Yang Li Enru Liu 《Geophysical Prospecting》2003,51(3):169-182
Many prospective passive ocean margins are covered by large areas of basalts. These basalts are often extremely heterogeneous and scatter the seismic energy of the conventional seismic reflection system so that it becomes difficult to obtain information on deeper reflectors. Since high frequencies are scattered more than low frequencies, we argue that the acquisition system for sub-basalt targets should be modified to emphasize the low frequencies, using much larger airguns, and towing the source and receivers at about 20 m depth. In the summer of 2001 we obtained seismic reflection data over basalt in the northeast Atlantic using a system modified to enhance the low-frequency energy. These new data show deep reflections that are not visible on lines shot in the same places with a conventional system. 相似文献
18.
A. T. WALDEN 《Geophysical Prospecting》1990,38(1):61-86
Spectral analysis is one of the most ubiquitous signal processing tools used in exploration geophysics. Among many applications, it is used simply to look at the frequency content of seismic traces, to find notches, to estimate wavelets under the minimum-phase assumption, and to match broadband synthetic seismograms to seismic data. Seismic spectra exhibit very large dynamic ranges, particularly at low frequencies. Estimation of low-frequency decay is very important for accurate modelling. However, when using traditional spectral estimates incorporating smoothing windows, too much sidelobe energy leaks from high power into low power areas, spoiling our ability to estimate low-frequency spectral decay. The multitaper method of spectral analysis due to D. Thomson does not employ just a single window, but rather a set of orthogonal data tapers. It is possible to have much less sidelobe contamination, while maintaining a stable estimate. The trace is tapered by each of a subset of the orthogonal tapers, and a raw spectral estimate produced in each case. These are combined to produce a final spectral estimate. The technique can be made adaptive by applying different weights to the different raw spectra at different frequencies. A comparison of seismic spectral estimation using this multitaper technique with a traditional approach having the same analysis bandwidth and stability demonstrates the very different estimates of spectral decay in the areas of high dynamic range. The multitaper approach provides estimates with much reduced sidelobe leakage, and hence is a very appealing method for reflection seismology. 相似文献
19.
Seismic channel edge detection using 3D shearlets—a study on synthetic and real channelised 3D seismic data 
下载免费PDF全文
下载免费PDF全文 Haleh Karbalaali Abdolrahim Javaherian Stephan Dahlke Rafael Reisenhofer Siyavash Torabi 《Geophysical Prospecting》2018,66(7):1272-1289
Automatic feature detection from seismic data is a demanding task in today's interpretation workstations. Channels are among important stratigraphic features in seismic data both due to their reservoir capability or drilling hazard potential. Shearlet transform as a multi‐scale and multi‐directional transformation is capable of detecting anisotropic singularities in two and higher dimensional data. Channels occur as edges in seismic data, which can be detected based on maximizing the shearlet coefficients through all sub‐volumes at the finest scale of decomposition. The detected edges may require further refinement through the application of a thinning methodology. In this study, a three‐dimensional, pyramid‐adapted, compactly supported shearlet transform was applied to synthetic and real channelised, three‐dimensional post‐stack seismic data in order to decompose the data into different scales and directions for the purpose of channel boundary detection. In order to be able to compare the edge detection results based on three‐dimensional shearlet transform with some famous gradient‐based edge detectors, such as Sobel and Canny, a thresholding scheme is necessary. In both synthetic and real data examples, the three‐dimensional shearlet edge detection algorithm outperformed Sobel and Canny operators even in the presence of Gaussian random noise. 相似文献
20.
To suppress the strong noise in seismic data with wide range of amplitudes, commonly used methods often yield unsatisfactory denoising results owing to inappropriate thresholds and require parametric testing as well as iterations to achieve the anticipated results. To overcome these problems, a data-driven strong amplitude suppression method based on the decibel criterion in the wavelet domain (ISANA) is proposed. The method determines the denoising threshold based on the decibel criterion and statistically analyzes the amplitude index rather than the abnormally high amplitudes. The method distinguishes the frequency band distributions of the valid signals in the time–frequency domain based on the wavelet transformation and then calculates thresholds in selected time windows, eventually achieving frequency-divided noise attenuation for better denoising. Simulations based on theoretical and real-world data verify the adaptability and low dependence of the method on the size of the time window. The method suppresses noise without energy loss in the signals. 相似文献