首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
We carried out laser shock experiments and wholly recovered shocked olivine and quartz samples. We investigated the petrographic features based on optical micrographs of sliced samples and found that each recovered sample comprises three regions, I (optically dark), II (opaque), and III (transparent). Scanning electron microscopy combined with electron backscattered diffraction shows that there are no crystal features in the region I; the materials in the region I have once melted. Moreover, numerical calculations performed with the iSALE shock physics code suggest that the boundary between regions II and III corresponds to Hugoniot elastic limit (HEL). Thus, we succeeded in the recovery of the entire shocked samples experienced over a wide range of pressures from HEL (~10 GPa) to melting pressure (~100 GPa) in a hierarchical order.  相似文献   

2.
All Martian meteorites have experienced shock metamorphism to some degree. We quantitatively determined shock‐related strain in olivine crystals to measure shock level and peak shock pressure experienced by five Martian meteorites. Two independent methods employing nondestructive in situ micro X‐ray diffraction (μXRD) are applied, i.e., (1) the lattice strain method, in which the lattice strain value (ε) for each olivine grain is derived from a Williamson–Hall plot using its diffraction pattern (peak width variation with diffraction angle) with reference to a best fit calibration curve of ε values obtained from experimentally shocked olivine grains; (2) the strain‐related mosaicity method, allowing shock stage to be estimated by measuring the streaking along the Debye rings of olivine grain diffraction spots to define their strain‐related mosaic spread, which can then be compared with olivine mosaicity in ordinary chondrites of known shock stage. In this study, both the calculated peak shock pressures and the estimated shock stages for Dar al Gani 476 (45.6 ± 0.6 GPa), Sayh al Uhaymir 005/8 (46.1 ± 2.2 GPa), and Nakhla (18.0 ± 0.6 GPa) compare well with literature values. Formal shock assessments for North West Africa 1068/1110 (53.9 ± 2.1 GPa) and North West Africa 6234 (44.6 ± 3.1 GPa) have not been reported within the literature; however, their calculated peak shock pressures fall within the range of peak shock pressures defining their estimated shock stages. The availability of nondestructive and quantitative μXRD methods to determine shock stage and peak shock pressure from olivine crystals provides a key tool for shock metamorphism analysis.  相似文献   

3.
Abstract— Calcite crystals within the Kaibab limestone in Meteor Crater, Arizona, are examined to understand how calcite is deformed during a meteorite impact. The Kaibab limestone is a silty finegrained and fossiliferous dolomudstone and the calcite crystals occur as replaced evaporite nodules with impact‐induced twinning. Twinning in the calcite is variable with deformational regimes based on abundances of crystals with twins and twin densities within crystals. The twins are similar to those that are seen in low tectonically deformed regimes. Low levels of shock are inferred from minor peak broadening of the X‐ray diffraction patterns (XRD) of the calcite crystals. In addition, electron spin resonance (ESR) spectroscopy data also indicates low shock levels (<3.0 GPa). Quantitative shock pressures and correlation between the XRD and ESR results are poor due to the inferred low shock levels in conjunction with the analytical error associated in calculation of the shock pressures.  相似文献   

4.
Abstract— Previous X‐ray powder diffraction (XRD) studies revealed that shock deformed carbonates and quartz have broader XRD patterns than those of unshocked samples. Entire XRD patterns, single peak profiles and Rietveld refined parameters of carbonate samples from the Sierra Madera impact crater, west Texas, unshocked equivalent samples from 95 miles north of the crater and the Mission Canyon Formation of southwest Montana and western Wyoming were used to evaluate the use of X‐ray powder diffraction as a potential tool for distinguishing impact deformed rocks from unshocked and tectonically deformed rocks. At Sierra Madera dolostone and limestone samples were collected from the crater rim (lower shock intensity) and the central uplift (higher shock intensity). Unshocked equivalent dolostone samples were collected from well cores drilled outside of the impact crater. Carbonate rocks of the Mission Canyon Formation were sampled along a transect across the tectonic front of the Sevier and Laramide orogenic belts. Whereas calcite subjected to significant shock intensities at the Sierra Madera impact crater can be differentiated from tectonically deformed calcite from the Mission Canyon Formation using Rietveld refined peak profiles, weakly shocked calcite from the crater rim appears to be indistinguishable from the tectonically deformed calcite. In contrast, Rietveld analysis readily distinguishes shocked Sierra Madera dolomite from unshocked equivalent dolostone samples from outside the crater and tectonically deformed Mission Canyon Formation dolomite.  相似文献   

5.
Abstract– We have performed six shock experiments at nominal peak‐shock pressures of 12.5, 20, 33, 46.5, 64, and 85 GPa using polycrystalline anhydrite discs embedded in ARMCO‐Fe sample containers and the shock reverberation technique. The recovered samples were analyzed using X‐ray powder diffraction and transmission electron microscopy (TEM). The X‐ray diffraction patterns recorded on all samples are compatible with the anhydrite structure; extra‐peaks have not been observed. Peak intensities decrease and peak broadening increases progressively in the pressure range from 0 to 46.5 GPa. At higher pressures, peak broadening diminishes and the X‐ray diffraction pattern of the 85 GPa sample resembles essentially that of unshocked, well‐crystallized anhydrite. Related structural changes at the nanoscale include in the pressure regime up to 20 GPa “cold” deformation phenomena such as cracks and deformation twins. Dislocation density increases up to 33 GPa and the strain increases up to 46.5 GPa. In the pressure range from 46.5 to 85 GPa, high postshock temperatures caused annealing of the deformation features. Increasing density and size of voids in the anhydrite samples shocked at 64 and 85 GPa indicate partial decomposition of anhydrite. Recalculation of the peak‐shock pressure in the experiments to a more realistic natural loading path indicates the onset of degassing of anhydrite in the pressure range of 30–41 GPa.  相似文献   

6.
We performed shock recovery experiments on an olivine‐phyric basalt at shock pressures of 22.2–48.5 GPa to compare with shock features in Martian meteorites (RBT 04261 and NWA 1950). Highly shocked olivine in the recovered basalt at 39.5 and 48.5 GPa shows shock‐induced planar deformation features (PDFs) composed of abundant streaks of defects. Similar PDFs were observed in olivine in RBT 04261 and NWA 1950 while those in NWA 1950 were composed of amorphous lamellae. Based on the present results and previous studies, the width and the abundance of lamellar fine‐structures increased with raising shock pressure. Therefore, these features could be used as shock pressure indicators while the estimated pressures may be lower limits due to no information of temperature dependence. For Martian meteorites that experienced heavy shocks, the minimum peak shock pressures of RBT 04261 and NWA 1950 are estimated to be 39.5–48.5 GPa and 48.5–56 GPa, respectively, which are found consistent with those estimated by postshock temperatures expected by the presence of brown olivine. We also investigated shock‐recovered basalts preheated at 750 and 800 °C in order to check the temperature effects on shock features. The results indicate a reduction in vitrifying pressure of plagioclase and a pressure increase for PDFs formation in olivine. Further temperature‐controlled shock recovery experiments will provide us better constraints to understand and to characterize various features found in natural shock events.  相似文献   

7.
We shocked calcite in an unconfined environment by launching small marble cylinders at 0.8–5.5 km s?1 into aluminum or copper plates, producing shock stresses between 5 and 79 GPa. The resulting 5–20 mm craters contained intimately mixed clastic and molten projectile residues over the entire pressure range, with melting commencing already at 5 GPa. Stoichiometrically pure calcite melts were not observed as all melts contained target metal. Some of these residues were distinctly depleted in CO2 and some contained even tiny CaO crystals, thus illustrating partial to complete loss of CO2. We interpret a thin seam of finely crystalline calcite to be the product of back reactions between CaO and CO2. The amount of carbonate residue in these craters, especially those at low velocities (<2 km s?1), is dramatically less than that of silicate impactors in similar cratering experiments, and we suggest that this is due to substantial outgassing of CO2. Similarly, the volume of carbonate melts relative to the volume of limestone or dolomite in many terrestrial crater structures seems insignificant as well, as is the volume of carbonate melt compared to the volume of impact melts derived from silicates. These volume considerations suggest that volatilization of CO2 is the dominant process in carbonate‐containing targets. Because we have difficulties in explaining naturally occurring calcite melts by shock processes in dolomite‐dominated targets, we speculate—essentially via process of elimination—that such carbonate melt blebs might be condensation products from an impact‐produced vapor cloud.  相似文献   

8.
This contribution addresses the role of chemical composition, pressure, temperature, and time during the shock transformation of plagioclase into diaplectic glass—i.e., maskelynite. Plagioclase of An50‐57 and An94 was recovered as almost fully isotropic maskelynite from room temperature shock experiments at 28 and 24 GPa. The refractive index (RI) decreased to values of a quenched mineral glass for An50‐57 plagioclase shocked to 45 GPa and shows a maximum in An94 plagioclase shocked to 41.5 GPa. The An94 plagioclase experiments can serve as shock thermobarometer for lunar highland rocks and howardite, eucrite, and diogenite meteorites. Shock experiments at 28, 32, 36, and 45 GPa and initial temperatures of 77 and 293 K on plagioclase (An50‐57) produced materials with identical optical and Raman spectroscopic properties. In the low temperature (<540 K) region, the formation of maskelynite is entirely controlled by shock pressure. The RI of maskelynite decreased in heating experiments of 5 min at temperatures of >770 K, thus, providing a conservative upper limit for the postshock temperature history of the rock. Although shock recovery experiments and static pressure experiments differ by nine orders of magnitude in typical time scale (microseconds versus hours), the amorphization of plagioclase occurs at similar pressure and temperature conditions with both methods. The experimental shock calibration of plagioclase can, together with other minerals, be used as shock thermobarometer for naturally shocked rocks.  相似文献   

9.
Abstract— Previous Raman investigations on experimentally shocked ingle‐crystal olivine indicated that the olivine Raman bands seemingly shift to a higher wave number with increasing shock pressure. If this effect could be confirmed, Raman analysis of natural shock‐metamorphosed minerals could potentially provide an important shock barometric tool. We carried out a Raman spectroscopic study on olivine in a series of natural dunite samples experimentally shocked to pressures between 5 and 59 GPa. In addition, we analyzed olivine grains in a sample of the Cold Bokkeveld C1 meteorite. We studied samples of several dunites with olivine of 90.64–92.00 mole% Fo to determine Raman effects in the region from 200 to 900 cm?1. Several olivine grains per sample/shock pressure stage were analyzed. Raman analysis, however, showed little or no shift with increasing shock pressure. The shifts to higher or lower frequencies observed were not specific for a given pressure stage, with some grains within a sample showing more shift than others. This finding is unrelated to the crystallographic orientation of analyzed grains and cannot be related systematically to the different degrees of optically determined shock metamorphism of the analyzed grains. We identified an increase in full width at half maximum (FWHM) for the 824 cm?1 band with increased shock pressure in the shocked Åheim samples above 45 GPa and, to a lesser extent, for the 856 cm?1 band. Evaluation of band broadening of olivine in the Cold Bokkeveld meteorite showed FWHM values that were much greater (9–20 cm?1) than those of olivine in the shocked dunite samples (7–12 cm?1). We concluded that these differences in FWHM are due to differences in chemical composition between the meteoritic and the experimentally shocked olivine. Therefore, using Raman spectroscopy to detect small shifts in wave numbers to higher frequencies with increased shock pressure does not yield consistent effects for polycrystalline dunite. An extra band at 650 cm?1 was identified in the Raman spectra of the unshocked Mooihoek dunite and the Åheim dunite samples shocked to 5, 29.3, and 59 GPa, as well as another at 696 cm?1 in all the spectra of the 59 GPa Åheim sample. The cause of these extra bands is not known. Comparison of these results with Raman spectra of olivine from the Cold Bokkeveld C1 meteorite did not allow us to determine shock pressures for the meteoritic olivine.  相似文献   

10.
Shock-induced recovery experiments were performed to investigate melt formation in porous sandstones in the low shock pressure regime between 2.5 and 17.5 GPa. The sandstone shocked at 2.5 and 5 GPa is characterized by pore closure, fracturing of quartz (Qtz), and compression and deformation of phyllosilicates; no melting was observed. At higher pressures, five different types of melts were generated around pores and alongside fractures in the sandstone. Melting of kaolinite (Kln), illite (Ill), and muscovite (Ms) starts at 7.5, 12, and 15 GPa, respectively. The larger the amount of water in these minerals (Kln ~14 wt%, Ill ~6–10 wt%, and Ms ~4 wt% H2O), the higher the shock compressibility and the lower the shock pressure required to induce melting. Vesicles in the almost dry silicate glasses attest to the loss of structural water during the short shock duration of the experiment. The compositions of the phyllosilicate-based glasses are identical to the composition of the parental minerals or their mixtures. Thus, this study has demonstrated that phyllosilicates in shocked sandstone undergo congruent melting during shock loading. In experiments at 10 GPa and higher, iron melt from the driver plate was injected into the phyllosilicate melts. During this process, Fe is partitioned from the metal droplets into the surrounding silicate melts, which induced unmixing of silicate melts with different chemical properties (liquid immiscibility). At pressures between 7.5 and 15 GPa, a pure SiO2 glass was formed, which is located as short and thin bands within Qtz grains. These bands were shown to contain tiny crystals of experimentally generated stishovite.  相似文献   

11.
This study demonstrates a relationship between changes of magnetic susceptibility and microstructure developing in minerals of a magnetite‐bearing ore, experimentally shocked to pressures of 5, 10, 20, and 30 GPa. Shock‐induced effects on magnetic properties were quantified by bulk magnetic susceptibility measurements while shock‐induced microstructures were studied by high‐resolution scanning electron microscopy. Microstructural changes were compared between magnetite, quartz, amphibole, and biotite grains. In the 5 GPa sample, a sharp drop of magnetic susceptibility correlates with distinct fragmentation as well as with formation of shear bands and twins in magnetite. At 10 GPa, shear bands and twins in magnetite are accompanied by droplet‐shaped nanograins. In this shock pressure regime, quartz and amphibole still show intensive grain fragmentation. Twins in quartz and foam‐shaped, highly porous amphibole are formed at 20 and 30 GPa. The formation of porous minerals suggests that shock heating of these mineral grains resulted in localized temperature spikes. The identified shock‐induced features in magnetite strongly advise that variations in the bulk magnetic susceptibility result from cooperative grain fragmentation, plastic deformation and/or localized amorphization, and probably postshock annealing. In particular, the increasing shock heating at high pressures is assumed to be responsible for a partial defect annealing which we suggest to be responsible for the almost constant values of magnetic susceptibility above 10 GPa.  相似文献   

12.
Abstract— We have studied carbonate and associated oxides and glasses in a demountable section of Allan Hills 84001 (ALH 84001) using optical, scanning, and transmission electron microscopy (TEM) to elucidate their origins and the shock history of the rock. Massive, fracture‐zone, and fracture‐filling carbonates in typical locations were characterized by TEM, X‐ray microanalysis, and electron diffraction in a comprehensive study that preserved textural and spatial relationships. Orthopyroxene is highly deformed, fractured, partially comminuted, and essentially unrecovered. Lamellae of diaplectic glass and other features indicate shock pressures >30 GPa. Bridging acicular crystals and foamy glass at contacts of orthopyroxene fragments indicate localized melting and vaporization of orthopyroxene. Carbonate crystals are >5 mm in size, untwinned, and very largely exhibit the R3c calcite structure. Evidence of plastic deformation is generally found mildly only in fracture‐zone and fracture‐filling carbonates, even adjacent to highly deformed orthopyroxene, and appears to have been caused by low‐stress effects including differential shrinkage. High dislocation densities like those observed in moderately shocked calcite are absent. Carbonate contains impactderived glasses of plagioclase, silica, and orthopyroxene composition indicating brief localized impact heating. Stringers and lenses of orthopyroxene glass in fracture‐filling carbonate imply flow of carbonates and crystallization during an impact. Periclase (MgO) occurs in magnesite as 30–50 nm crystals adjacent to voids and negative crystals and as ?1 μm patches of 3 nm crystals showing weak preferred orientation consistent with (111)MgO//(0001)carb, as observed in the thermal decomposition of CaCO3 to CaO. Magnetite crystals that are epitaxially oriented at voids, negative crystals, and microfractures clearly formed in situ. Fully embedded, faceted magnetites are topotactically oriented, in general with (111)mag//(0001)carb, so that their oxygen layers are aligned. In optically opaque rims, magnetites are more irregularly shaped and, except for the smallest crystals, poorly aligned. All magnetite and periclase crystals probably formed by exsolution from slightly non‐stoichiometric, CO2‐poor carbonate following impact‐induced thermal decomposition. Any magnetites that existed in the rock before shock heating could not have preserved evidence for biogenic activity.  相似文献   

13.
Abstract— Micrometeorites have been significantly altered or melted by heating, which has been mainly ascribed to aerodynamic drag during atmospheric entry. However, if a major fraction of micrometeorites are produced by impacts on porous asteroids, they may have experienced shock heating before contact with the Earth's atmosphere (Tomeoka et al. 2003). A transmission electron microscope (TEM) study of the matrix of Murchison CM chondrite experimentally shocked at pressures of 10–49 GPa shows that its mineralogy and texture change dramatically, mainly due to shock heating, with the progressive shock pressures. Tochilinite is completely decomposed to an amorphous material at 10 GPa. Fe‐Mg serpentine is partially decomposed and decreases in amount with increasing pressure from 10 to 30 GPa and is completely decomposed at 36 GPa. At 49 GPa, the matrix is extensively melted and consists mostly of aggregates of equigranular grains of Fe‐rich olivine and less abundant low‐Ca pyroxene embedded in Si‐rich glass. The mineralogy and texture of the shocked samples are similar to those of some types of micrometeorites. In particular, the samples shocked at 10 and 21 GPa are similar to the phyllosilicate (serpentine)‐rich micrometeorites, and the sample shocked at 49 GPa is similar to the olivine‐rich micrometeorites. The shock heating effects also resemble the effects of pulse‐heating experiments on the CI and CM chondrite matrices that were conducted to simulate atmospheric entry heating. We suggest that micrometeorites derived from porous asteroids are likely to go through both shock and atmospheric‐entry heating processes.  相似文献   

14.
We present laboratory mid-infrared transmission/absorption spectra obtained from matrix of the hydrated Murchison CM meteorite experimentally shocked at peak pressures of 10-49 GPa, and compare them to astronomical observations of circumstellar dust in different stages of the formation of planetary systems. The laboratory spectra of the Murchison samples exhibit characteristic changes in the infrared features. A weakly shocked sample (shocked at 10 GPa) shows almost no changes from the unshocked sample dominated by hydrous silicate (serpentine). Moderately shocked samples (21-34 GPa) have typical serpentine features gradually replaced by bands of amorphous material and olivine with increasing shock pressure. A strongly shocked sample (36 GPa) shows major changes due to decomposition of the serpentine and due to devolatilization. A shock melted sample (49 GPa) shows features of olivine recrystallized from melted material.The infrared spectra of the shocked Murchison samples show similarities to astronomical spectra of dust in various young stellar objects and debris disks. The spectra of highly shocked Murchison samples (36 and 49 GPa) are similar to those of dust in the debris disks of HD113766 and HD69830, and the transitional disk of HD100546. The moderately shocked samples (21-34 GPa) exhibit spectra similar to those of dust in the debris disks of Beta Pictoris and BD+20307, and the transitional disk of GM Aur. An average of the spectra of all Murchison samples (0-49 GPa) has a similarity to the spectrum of the older protoplanetary disk of SU Auriga. In the gas-rich transitional and protoplanetary disks, the abundances of amorphous silicates and gases have widely been considered to be a primary property. However, our study suggests that impact processing may play a significant role in generating secondary amorphous silicates and gases in those disks. Infrared spectra of the shocked Murchison samples also show similarities to the dust from comets (C/2002 V1, C/2001 RX14, 9P/Tempel 1, and Hale Bopp), suggesting that the comets also contain shocked Murchison-like material.  相似文献   

15.
The fundamental approach for the confirmation of any terrestrial meteorite impact structure is the identification of diagnostic shock metamorphic features, together with the physical and chemical characterization of impactites and target lithologies. However, for many of the approximately 200 confirmed impact structures known on Earth to date, multiple scale‐independent tell‐tale impact signatures have not been recorded. Especially some of the pre‐Paleozoic impact structures reported so far have yielded limited shock diagnostic evidence. The rocks of the Dhala structure in India, a deeply eroded Paleoproterozoic impact structure, exhibit a range of diagnostic shock features, and there is even evidence for traces of the impactor. This study provides a detailed look at shocked samples from the Dhala structure, and the shock metamorphic evidence recorded within them. It also includes a first report of shatter cones that form in the shock pressure range from ~2 to 30 GPa, data on feather features (FFs), crystallographic indexing of planar deformation features, first‐ever electron backscatter diffraction data for ballen quartz, and further analysis of shocked zircon. The discovery of FFs in quartz from a sample of the MCB‐10 drill core (497.50 m depth) provides a comparatively lower estimate of shock pressure (~7–10 GPa), whereas melting of a basement granitoid infers at least 50–60 GPa shock pressure. Thus, the Dhala impactites register a strongly heterogeneous shock pressure distribution between <2 and >60 GPa. The present comprehensive review of impact effects should lay to rest the nonimpact genesis of the Dhala structure proposed by some earlier workers from India.  相似文献   

16.
Abstract— We studied unshocked and experimentally (at 12, 25, and 28 GPa, with 25, 100, 450, and 750°C pre‐shock temperatures) shock‐metamorphosed Hospital Hill quartzite from South Africa using cathodoluminescence (CL) images and spectroscopy and Raman spectroscopy to document systematic pressure or temperature‐related effects that could be used in shock barometry. In general, CL images of all samples show CL‐bright luminescent patchy areas and bands in otherwise nonluminescent quartz, as well as CL‐dark irregular fractures. Fluid inclusions appear dominant in CL images of the 25 GPa sample shocked at 750°C and of the 28 GPa sample shocked at 450°C. Only the optical image of our 28 GPa sample shocked at 25°C exhibits distinct planar deformation features (PDFs). Cathodoluminescence spectra of unshocked and experimentally shocked samples show broad bands in the near‐ultraviolet range and the visible light range at all shock stages, indicating the presence of defect centers on, e.g., SiO4 groups. No systematic change in the appearance of the CL images was obvious, but the CL spectra do show changes between the shock stages. The Raman spectra are characteristic for quartz in the unshocked and 12 GPa samples. In the 25 and 28 GPa samples, broad bands indicate the presence of glassy SiO2, while high‐pressure polymorphs are not detected. Apparently, some of the CL and Raman spectral properties can be used in shock barometry.  相似文献   

17.
Abstract— Impact‐metamorphosed CaCO3‐bearing sandstones at the Haughton structure have been divided into 6 classes, based to a large extent on a previous classification developed for sandstones at Meteor Crater. Class 1a sandstones (<3 GPa) display crude shatter cones, but no other petrographic indications of shock. At pressures of 3 to 5.5 GPa (class 1b), porosity is destroyed and well‐developed shatter cones occur. Class 2 rocks display planar deformation features (PDFs) and are characterized by a “jigsaw” texture produced by rotation and shear at quartz grain boundaries. Calcite shows an increase in the density of mechanical twins and undergoes micro‐brecciation in class 1 and 2 sandstones. Class 3 samples display multiple sets of PDFs and widespread development of diaplectic glass, toasted quartz, and symplectic intergrowths of quartz, diaplectic glass, and coesite. Textural evidence, such as the intermingling of silicate glasses and calcite and the presence of flow textures, indicates that calcite in class 3 sandstones has undergone melting. This constrains the onset of melting of calcite in the Haughton sandstones to > 10 < 20 GPa. At higher pressures, the original texture of the sandstone is lost, which is associated with major development of vesicular SiO2 glass or lechatelierite. Class 5 rocks (>30 GPa) consist almost entirely of lechatelierite. A new class of shocked sandstones (class 6) consists of SiO2‐rich melt that recrystallized to microcrystalline quartz. Calcite within class 4 to 6 sandstones also underwent melting and is preserved as globules and euhedral crystals within SiO2 phases, demonstrating the importance of impact melting, and not decomposition, in these CaCO3‐bearing sandstones.  相似文献   

18.
During impact events, zircons develop a wide range of shock metamorphic features that depend on the pressure and temperature conditions experienced by the zircon. These conditions vary with original distance from impact center and whether the zircon grains are incorporated into ejecta or remain within the target crust. We have employed the range of shock metamorphic features preserved in >4 Ga lunar zircons separated from Apollo 14 and 15 breccias and soils in order to gain insights into the impact shock histories of these areas of the Moon. We report microstructural characteristics of 31 zircons analyzed using electron beam methods including electron backscatter pattern (EBSP) and diffraction (EBSD). The major results of this survey are as follows. (1) The abundance of curviplanar features hosting secondary impact melt inclusions suggests that most of the zircons have experienced shock pressures between 3 and 20 GPa; (2) the scarcity of recrystallization or decomposition textures and the absence of the high‐pressure polymorph, reidite, suggests that few grains have been shocked to over 40 GPa or heated above 1000 °C in ejecta settings; (3) one grain exhibits narrow, arc‐shaped bands of twinned zircon, which map out as spherical shells, and represent a novel shock microstructure. Overall, most of the Apollo 14 and 15 zircons exhibit shock features similar to those of terrestrial zircon grains originating from continental crust below large (~200 km) impact craters (e.g., Vredefort impact basin), suggesting derivation from central uplifts or uplifted rims of large basins or craters on the Moon and not high‐temperature and ‐pressure ejecta deposits.  相似文献   

19.
Abstract– We carried out shock experiments on macroscopic spherical samples of the L4 ordinary chondrite Saratov (natural shock stages S2–S3), using explosively generated spherical shock waves with maximum peak pressures of 400 GPa and shock‐induced temperatures >800 °C (up to several thousands °C). The evolution of shock metamorphism within a radius of the spherical samples was investigated using optical and scanning electron microscopy, microprobe and magnetic analyses as well as Mössbauer spectroscopy and X‐ray diffraction techniques. Petrographic analyses revealed a shock‐induced formation of three different concentric petrographic zones within the shocked samples: zone of total melting (I), zone of partial melting (II), and zone of solid‐state shock features (III). We found a progressive pressure‐induced oxidation of Fe‐Ni metal, whose degree increased with increasing shock peak pressure. The amount of FeO within zone I increased the factor of 1.4 with respect to its amount in the unshocked Saratov sample. This suggests that within zone I about 70 wt% of the initial metallic iron was oxidized, whereas magnetic analyses showed that about 10 wt% of it remained intact. This strongly supports the hypothesis that, in addition to oxidation, a migration of metallic iron from the central heavily shocked zone I toward less shocked peripheral zone took place as well (likely through shock veins where metallic droplets were observed). Magnetic analyses also showed a shock‐induced transformation of tetrataenite to taenite within all shocked subsamples, resulting in magnetic softening of these subsamples (decrease in remanent coercivity). These results have important implications for extraterrestrial paleomagnetism suggesting that due to natural impact processes, the buried crustal rocks of heavily cratered solid solar system bodies can have stronger remanent magnetism than the corresponding surface rocks.  相似文献   

20.
Anorthite is an important constituent mineral in basaltic achondrites from small celestial bodies. Its high‐pressure phase transformation in shocked meteorites has not been systematically studied. In this study, we report the diverse phase transformation behaviors of anorthite in a shocked eucrite Northwest Africa (NWA) 2650, which also contains coesite, stishovite, vacancy‐rich clinopyroxene, super‐silicic garnet, and reidite. Anorthite in NWA 2650 has transformed into anorthite glass (anorthite glassy vein, maskelynite, and glass with a schlieren texture and vesicles), tissintite and dissociated into three‐phase assemblage grossular + kyanite + silica glass. Different occurrences of anorthite glass might have formed via the mechanism involving shear melting, solid‐state transformation, and postshock thermally melting, respectively. Tissintite could have crystallized from a high‐pressure plagioclase melt. The nucleation of tissintite might be facilitated by relict pyroxene fragments and the early formed vacancy‐rich clinopyroxene. The three‐phase assemblage grossular, kyanite, and silica glass should have formed from anorthitic melt at high‐pressure and high‐temperature conditions. The presence of maskelynite and reidite probably suggests a minimum peak shock pressure up to 20 GPa, while the other high‐pressure phases indicate that the shock pressure during the crystallization of shock melt veins might vary from >8 GPa to >2 GPa with a heterogeneous temperature distribution.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号