共查询到20条相似文献，搜索用时 46 毫秒
1.
2.
地震波的运动学信息(走时、斜率等)通常用于宏观速度建模.针对走时反演方法,一个基本问题是走时拾取或反射时差的估计.对于成像域反演方法,可以通过成像道集的剩余深度差近似计算反射波时差.在数据域中,反射地震观测数据是有限频带信号,如果不能准确地确定子波的起跳时间,难以精确地确定反射波的到达时间.另一方面,如果缺乏关于模型的先验信息,则很难精确测量自地下同一个反射界面的观测数据同相轴和模拟数据同相轴之间的时差.针对走时定义及时差测量问题,首先从叠前地震数据的稀疏表达出发,利用特征波场分解方法,提取反射子波并估计局部平面波的入射和出射射线参数.进一步,为了实现自动和稳定的走时拾取,用震相的包络极值对应的时间定义反射波的到达时,实现了立体数据中间的自动生成.理论上讲,利用包络极值定义的走时大于真实的反射波走时,除非观测信号具有无限带宽(即delta脉冲).然而,走时反演的目的是估计中-大尺度的背景速度结构,因此走时误差导致的速度误差仍然在可以接受的误差范围内.利用局部化传播算子及特征波聚焦成像条件将特征波数据直接投影到地下虚拟反射点,提出了一种新的反射时差估计方法.既避免了周期跳跃现象以及串层等可能性,又消除了振幅因素对时差测量的影响.最后,在上述工作基础之上,提出了一种基于特征波场分解的新型全自动反射走时反演方法(CWRTI).通过对泛函梯度的线性化近似,并用全变差正则化方法提取梯度的低波数部分,实现了背景速度迭代反演.在理论上,无需长偏移距观测数据或低频信息、对初始模型依赖性低且计算效率高,可以为后续的全波形反演提供可靠的初始速度模型.理论和实际资料的测试结果证明了本文方法的有效性. 相似文献
3.
Crosshole ground penetrating radar (GPR) tomography has been widely used and has the potential to improve the obtained subsurface models due to its high spatial resolution compared to other methods. Recent advances in full-waveform inversion of crosshole GPR data show that higher resolution images can be obtained compared to conventional ray-based GPR inversion because it can exploit all information present in the observed data. Since the first application of full-waveform inversion on synthetic and experimental GPR data, the algorithm has been significantly improved by extending the scalar to a vectorial approach, and changing the stepped permittivity and conductivity update into a simultaneous update. Here, we introduce new normalized gradients that do not depend on the number of sources and receivers which enable a comparison of the gradients and step lengths for different crosshole survey layouts. An experimental data set acquired at the Boise Hydrogeophysics Research Site is inverted using different source–receiver setups and the obtained permittivity and conductivity images, remaining gradients and final misfits are compared for the different versions of the full-waveform inversion. Moreover, different versions of the full-waveform inversion are applied to obtain an overview of all improvements. Most improvements result in a reducing final misfit between the measured and synthetic data and a reducing remaining gradient at the final iteration. Regions with relatively high remaining gradient amplitudes indicate less reliable inversion results. Comparison of the final full-waveform inversion results with Neutron–Neutron porosity log data and capacitive resistivity log data show considerably higher spatial frequencies for the logging data compared to the full-waveform inversion results. To enable a better comparison, we estimated a simple wavenumber filter and the full-waveform inversion results show an improved fit with the logging data. This work shows the potential of full-waveform inversion as an advanced method that can provide high resolution images to improve hydrological models. 相似文献
4.
Time-lapse monitoring is a powerful tool for observing dynamic changes in the subsurface. In particular it offers the potential for achieving inversion results with increased fidelity through the inclusion of complementary information from multiple time-steps. This inclusion of complementary information can reduce the need for spatial smoothing, without adding inversion artifacts to the resulting images. Commonly used time-lapse inversion methods include the ratio method, cascaded time-lapse inversion, difference inversion and differencing independent inversions. We introduce two additional methods in which both time-lapse data sets are inverted simultaneously. In the first, called temporally constrained time-lapse inversion, inversion of both datasets is done under a single optimization procedure and constraints are added to the regularization to ensure that the changes from one time to another are smooth. In the second method, called simultaneous time-lapse inversion, the inversions at time 1 and time 2 are performed simultaneously and constraints of smoothness and closeness to a reference model are applied to the difference image produced at each iteration, and subsequently, the constraints are updated at each iteration. Through both a numerical and a field example we compare the results of common time-lapse inversion methods as well as the introduced approaches. We found that of the commonly used time-lapse inversion methods the difference inversion method produced the best resolution of time-lapse changes and was the most robust in the presence of noise. However, we found that the alternative approach of simultaneous time-lapse inversion produced the best reconstruction of modeled EC changes in the numerical example and easily interpretable high resolution difference images in the field example. Moreover, there was less tailoring of regularization parameters with our simultaneous time-lapse approach, suggesting that it will lend itself well to an automated inversion code. 相似文献
5.
The integration of geophysical data into the subsurface characterization problem has been shown in many cases to significantly improve hydrological knowledge by providing information at spatial scales and locations that is unattainable using conventional hydrological measurement techniques. In particular, crosshole ground-penetrating radar (GPR) tomography has shown much promise in hydrology because of its ability to provide highly detailed images of subsurface radar wave velocity, which is strongly linked to soil water content. Here, we develop and demonstrate a procedure for inverting together multiple crosshole GPR data sets in order to characterize the spatial distribution of radar wave velocity below the water table at the Boise Hydrogeophysical Research Site (BHRS) near Boise, Idaho, USA. Specifically, we jointly invert 31 intersecting crosshole GPR profiles to obtain a highly resolved and consistent radar velocity model along the various profile directions. The model is found to be strongly correlated with complementary neutron porosity-log data and is further corroborated by larger-scale structural information at the BHRS. This work is an important prerequisite to using crosshole GPR data together with existing hydrological measurements for improved groundwater flow and contaminant transport modeling. 相似文献
6.
The travel time and amplitude of ground-penetrating radar (GPR) waves are closely related to medium parameters such as water content, porosity, and dielectric permittivity. However, conventional estimation methods, which are mostly based on wave velocity, are not suitable for real complex media because of limited resolution. Impedance inversion uses the reflection coefficient of radar waves to directly calculate GPR impedance and other parameters of subsurface media. We construct a 3D multiscale stochastic medium model and use the mixed Gaussian and exponential autocorrelation function to describe the distribution of parameters in real subsurface media. We introduce an elliptical Gaussian function to describe local random anomalies. The tapering function is also introduced to reduce calculation errors caused by the numerical simulation of discrete grids. We derive the impedance inversion workflow and test the calculation precision in complex media. Finally, we use impedance inversion to process GPR field data in a polluted site in Mongolia. The inversion results were constrained using borehole data and validated by resistivity data. 相似文献
7.
We estimate velocity anisotropy factors from seismic traveltime tomographic data and apply a correction for anisotropy in the inversion procedure to test possible improvements on the traveltime fit and the quality of the resulting tomographic images. We applied the anisotropy correction on a traveltime data set obtained from the investigation of the foundation structure of a monumental building: a Byzantine church from the 11th century AD, in Athens, Greece. Vertical transverse isotropy is represented by one axis of symmetry and one anisotropy magnitude for the entire tomographic inversion grid. We choose the vertical direction for the symmetry axis by analysing the available data set and taking into account information on the character of the foundations of the church from the literature and past excavations. The anisotropy magnitude is determined by testing a series of values of anisotropy and examining their effect on the tomographic inversion results. The best traveltime fit and image quality are obtained with an anisotropy value (Vmax/Vmin) of 1.6, restricted to the high velocity structures in the subsurface. We believe that this anisotropy value, which is significantly higher than the usual values reported for near‐surface geological material, is related to the fabric of the church foundations, due to the shape of the individual stone blocks and the layout of the stonework. Inversion results obtained with the correction for anisotropy indicate that both the traveltime fit and the image quality are improved, providing an enhanced reconstruction of the velocity field, especially for the high‐velocity features. Based on this enhanced and more reliable reconstruction of velocity distribution, an improved image of the subsurface material character was made possible. In particular, the pattern and state of the church foundations and possible weak ground material areas were revealed more clearly. This improved subsurface knowledge may assist in a better design of restoration measures for monumental buildings such as Byzantine churches. 相似文献
8.
《Advances in water resources》2004,27(6):583-599
Methods for estimating the parameter distributions necessary for modeling fluid flow and contaminant transport in the shallow subsurface are in great demand. Soil properties such as permeability, porosity, and water retention are typically estimated through the inversion of hydrological data (e.g., measurements of capillary pressure and water saturation). However, ill-posedness and non-uniqueness commonly arise in such non-linear inverse problems making their solutions elusive. Incorporating additional types of data, such as from geophysical methods, may greatly improve the success of inverse modeling. In particular, ground-penetrating radar (GPR) methods have proven sensitive to subsurface fluid flow processes and appear promising for such applications. In the present work, an inverse technique is presented which allows for the estimation of flow parameter distributions and the prediction of flow phenomena using GPR and hydrological measurements collected during a transient flow experiment. Specifically, concepts from the pilot point method were implemented in a maximum a posteriori (MAP) framework to allow for the generation of permeability distributions that are conditional to permeability point measurements, that maintain specified patterns of spatial correlation, and that are consistent with geophysical and hydrological data. The current implementation of the approach allows for additional flow parameters to be estimated concurrently if they are assumed uniform and uncorrelated with the permeability distribution. (The method itself allows for heterogeneity in these parameters to be considered, and it allows for parameters of the petrophysical and semivariogram models to be estimated as well.) Through a synthetic example, performance of the method is evaluated under various conditions, and some conclusions are made regarding the joint use of transient GPR and hydrological measurements in estimating fluid flow parameters in the vadose zone. 相似文献
9.
Ground-penetrating radar (GPR) is an effective tool for imaging the spatial distribution of water content. An artificial groundwater recharge test was conducted in Nagaoka City in Japan, and time-lapse crosshole GPR data were collected to monitor the infiltration process in the vadose zone. Since electromagnetic wave velocities in the vadose zone are largely controlled by variations in water content, an increase in traveltime is interpreted as an increase in saturation. In the test zone, the infiltrated water penetrated downward with an average velocity of about 2.7 m/h. A finite-difference time-domain method using two-dimensional cylindrical coordinates is applied to simulate radargrams associated with the advancing wetting front and to quantify the effects of critical refraction. Standard zero-offset profiling for which all first-arrivals are assumed to be direct waves results in an underestimation of water content in the transition zone above the wetting front. As a result, correct velocity analysis requires identification of first-arriving critically refracted waves from the traveltime profile to accurately determine a water content profile. 相似文献
10.
11.
波形反演是近年来较热门的反演方法,其分辨率可以达到亚波长级别.在波形反演的实际应用中,源子波的估计十分重要.传统方法使用反褶积来估计源子波并随着反演过程更新,该方法在合成数据波形反演中效果较好,但在实际数据反演过程中存在一系列的问题.由于实际数据信噪比较低,在源子波估计过程中需要大量的人为干涉,且结果并不一定可靠.本文使用一种基于褶积波场的新型目标函数,令反演过程不再依赖源子波.详细推导了针对跨孔雷达波形反演的梯度及步长公式,实现介电常数和电导率的同步反演.针对一个合成数据模型同时反演介电常数和电导率,结果表明该方法能够反演出亚波长尺寸异常体的形状和位置.接着,将该方法应用到两组实际数据中,并与基于估计源子波的时间域波形反演结果进行比较.结果表明不依赖源子波的时间域波形反演结果分辨率更高,也更准确. 相似文献
12.
13.
The assessment of hydraulic conductivity of heterogeneous aquifers is a difficult task using traditional hydrogeological methods (e.g., steady state or transient pumping tests) due to their low spatial resolution. Geophysical measurements performed at the ground surface and in boreholes provide additional information for increasing the resolution and accuracy of the inverted hydraulic conductivity field. We used a stochastic joint inversion of Direct Current (DC) resistivity and self-potential (SP) data plus in situ measurement of the salinity in a downstream well during a synthetic salt tracer experiment to reconstruct the hydraulic conductivity field between two wells. The pilot point parameterization was used to avoid over-parameterization of the inverse problem. Bounds on the model parameters were used to promote a consistent Markov chain Monte Carlo sampling of the model parameters. To evaluate the effectiveness of the joint inversion process, we compared eight cases in which the geophysical data are coupled or not to the in situ sampling of the salinity to map the hydraulic conductivity. We first tested the effectiveness of the inversion of each type of data alone (concentration sampling, self-potential, and DC resistivity), and then we combined the data two by two. We finally combined all the data together to show the value of each type of geophysical data in the joint inversion process because of their different sensitivity map. We also investigated a case in which the data were contaminated with noise and the variogram unknown and inverted stochastically. The results of the inversion revealed that incorporating the self-potential data improves the estimate of hydraulic conductivity field especially when the self-potential data were combined to the salt concentration measurement in the second well or to the time-lapse cross-well electrical resistivity data. Various tests were also performed to quantify the uncertainty in the inverted hydraulic conductivity field. 相似文献
14.
3-D simultaneous inversion for velocity and reflector geometry using multiple classes of arrivals in a spherical coordinate frame 总被引：1，自引：0，他引：1
Guo-jiao Huang Chao-ying Bai Xing-wang Li Stewart Greenhalgh 《Journal of Seismology》2014,18(1):123-135
The two key requirements in conducting 3-D simultaneous traveltime tomography on real data at the regional and global scale with multiple classes of arrival time information are (1) it needs an efficient and accurate arrival tracking algorithm for multiply transmitted, reflected (or refracted) and converted waves in a 3-D variable velocity model with embedded velocity discontinuities (or subsurface interfaces), and (2) a subdimensional inversion solver is required which can easily search for different types of model parameters to balance the trade-off between the different types of model parameter updated in the simultaneous inversion process. For these purposes, we first extend a popular grid/cell-based wavefront expanding ray tracing algorithm (the multistage irregular shortest-path ray tracing method), which previously worked only in Cartesian coordinate at the local scale, to spherical coordinates appropriate to the regional or global scale. We then incorporated a fashionable inversion solver (the subspace method) to formulate a simultaneous inversion algorithm, in which the multiple classes of arrivals (including direct and reflected arrivals from different velocity discontinuities) can be used to simultaneously update both the velocity fields and the reflector geometries. Numerical tests indicate that the new inversion method is both applicable and flexible in terms of computational efficiency and solution accuracy, and is not sensitive to a modest level of noise in the traveltime data. It offers several potential benefits over existing schemes for real data seismic imaging. 相似文献
15.
The current time-lapse practice is to exactly repeat well-sampled acquisition geometries to mitigate acquisition effects on the time-lapse differences. In order to relax the rigid requirements on acquisition effects, we propose simultaneous joint migration inversion as an effective time-lapse tool for reservoir monitoring, which combines a joint time-lapse data processing strategy with the joint migration inversion method. Joint migration inversion is a full-wavefield inversion method that explains the measured reflection data using a parameterization in terms of reflectivity and propagation velocity. Both the inversion process inside the imaging/inversion scheme and the extra illumination provided by including multiples in joint migration inversion makes the obtained velocity and reflectivity operator largely independent of the utilized acquisition geometry and, thereby, relaxes the strong requirement of non-repeatability during the monitoring. Because simultaneous joint migration inversion inverts for all datasets simultaneously and utilizes various constraints on the estimated reflectivities and velocity, the obtained time-lapse differences have much higher accuracy compared to inverting each dataset separately. It allows the baseline and monitor parameters to communicate with each other dynamically during inversion via a user-defined spatial weighting operator. In order to get more localized time-lapse velocity differences, we further extend the regular simultaneous joint migration inversion to a robust high-resolution simultaneous joint migration inversion process using the time-lapse reflectivity difference as an extra constraint for the velocity estimation during inversion. This constraint makes a link between the reflectivity- and the velocity difference by exploiting the relationship between them. We demonstrate the feasibility of the proposed method with a highly realistic synthetic model based on the Grane field offshore Norway and a time-lapse field dataset from the Troll Field. 相似文献
16.
Heather Schijns Suvi Heinonen Douglas R. Schmitt Pekka Heikkinen Ilmo T. Kukkonen 《Geophysical Prospecting》2009,57(6):997-1008
A traveltime inversion technique is applied to model the upper ∼40 m of the subsurface of a glaciated shield rock area in order to calculate static corrections for a multi-azimuth multi-depth walk-away vertical seismic profile and a surface seismic reflection profile. First break information from a seismic refraction survey is used in conjunction with a ray-tracing program and an iterative damped least-squares inversion algorithm to create a two-dimensional model of the subsurface. The layout of the seismic survey required crooked seismic lines and substantial gaps in the source and receiver coverage to be accounted for. Additionally, there is substantial topographical variation and a complex geology consisting of glaciofluvial sediment and glacial till overlying a crystalline bedrock. The resolution and reliability of the models is measured through a parameter perturbation technique, normalized χ2 values, root means square traveltime residuals and comparison to known geology. 相似文献
17.
The main objective of this work is to establish the applicability of shallow surface‐seismic traveltime tomography in basalt‐covered areas. A densely sampled ～1300‐m long surface seismic profile, acquired as part of the SeiFaBa project in 2003 ( Japsen et al. 2006 ) at Glyvursnes in the Faroe Islands, served as the basis to evaluate the performance of the tomographic method in basalt‐covered areas. The profile is centred at a ～700‐m deep well. VP, VS and density logs, a zero‐offset VSP, downhole‐geophone recordings and geological mapping in the area provided good means of control. The inversion was performed with facilities of the Wide Angle Reflection/Refraction Profiling program package ( Ditmar et al. 1999 ). We tested many inversion sequences while varying the inversion parameters. Modelled traveltimes were verified by full‐waveform modelling. Typically an inversion sequence consists in several iterations that proceed until a satisfactory solution is reached. However, in the present case with high velocity contrasts in the subsurface we obtained the best result with two iterations: first obtaining a smooth starting model with small traveltime residuals by inverting with a high smoothing constraint and then inverting with the lowest possible smoothing constraint to allow the inversion to have the full benefit of the traveltime residuals. The tomogram gives usable velocity information for the near‐surface geology in the area but fails to reproduce the expected velocity distribution of the layered basalt flows. Based on the analysis of the tomogram and geological mapping in the area, a model was defined that correctly models first arrivals from both surface seismic data and downhole‐geophone data. 相似文献
18.
We analyze the properties of the scattering matrix associated with the incident and scattered electric fields used in GPR. The elements of the scattering matrix provide information produced by different polarizations of the incident wave field. Rotationally invariant quantities such as trace, determinant and Frobenius norm lead to images that combine the information contained in the four elements of the scattering matrix in a mathematically simple and sound manner. The invariant quantities remove the directional properties implicit in the dipolar field used in GPR allowing the application of standard processing techniques designed for scalar fields, such as those used in seismic data processing. We illustrate the non-directional properties of the invariants using a 3D simulation of the wavefield produced by a point scatterer. The estimation of the azimuth angle of elongated targets is also explored using rotation transformations that maximize alternatively the co-polarized or the cross-polarized responses. The angle estimation is essentially an unstable process, particularly if low amplitudes or noisy data are involved. We apply the Frobenius norm 6S6F as a criterion for selection of the best amplitudes to use for a more stable and significant angle estimation. The performance of our formulation was tested with synthetic data produced by a 3D model of an air-filled metal pipe buried in a homogeneous halfspace. The images resulting from the invariants show a clear diffraction hyperbola suitable for a scalar wavefield migration, while the azimuth of the pipe is neatly resolved for amplitudes selected with 6S6F ≥ 0.4. A field experiment conducted above an aqueduct pipe illustrates the proposed methods with real data. The images obtained from the invariants are better than those from the individual elements of the scattering matrix. The azimuth estimated using our formulation is in agreement with the probable orientation of the aqueduct. Finally, a field experiment above a buried air-filled barrel shows that combining the information in the way proposed in this work may lead to an improved image of the subsurface target, the cost to pay is the lost of directional information contained in the scattering matrix. In general, we claim that the methods proposed in this work can be useful to analyze the information acquired by multicomponent GPR surveys using standard scalar wavefield algorithms. 相似文献
19.
The estimation of time-lapse time shifts between two, or several, repeated seismic surveys has become increasingly popular over the past eighteen years. These time shifts are a reliable and informative seismic attribute that can relate to reservoir production. Correction for these time shifts or the underlying velocity perturbations and/or subsurface displacement in an imaging sense also permits accurate evaluation of time-lapse amplitudes by attempting to decouple the kinematic component. To date, there are approximately thirty methods for time-shift estimation described in the literature. We can group these methods into three main families of mathematical development, together with several miscellaneous techniques. Here we detail the underlying bases for these methods, and the acknowledged benefits and weaknesses of each class of method highlighted. We illustrate this review with a number of time-lapse seismic examples from producing fields. No method is necessarily superior to the others, as its selection depends on ease of implementation, noise characteristics of the field data, and whether the inherent assumptions suit the case in question. However, cross-correlation stands out as the algorithm of choice based on the Pareto principle and waveform inversion the algorithm delivering best resolution. This is a companion study to the previous review of time-shift magnitudes and a discussion of their rock physics basis. 相似文献
20.
Thinly stratified sedimentary deposits in a heterogeneous field were investigated to obtain basic physical data for the simulation of water flow. A procedure is described which translates a thinly stratified soil profile into a number of functional layers using functional hydrological properties. A functional layer is defined as a combination of one or more soil horizons and should (i) be recognizable during a soil survey using an auger and (ii) show significantly different functional hydrological properties when compared with another functional layer. This procedure gave three easily recognizable functional layers. Sets of hydrological characteristics of these three functional layers were obtained by physical measurements of the soil and by estimation, using textural data for classification into a standard Dutch series. The performance of several combinations of these sets was tested by comparing simulated and measured soil matric potentials for seven plots during one year. The best simulation results were obtained if measured soil hydraulic characteristics were used for relatively homogeneous functional layers and if the soil hydraulic characteristics were estimated at each location for the most heterogeneous layer. 相似文献