共查询到20条相似文献，搜索用时 375 毫秒
1.
2.
3.
4.
以地块分类为核心的冬小麦种植面积遥感估算 总被引：5，自引：0，他引：5
以提高冬小麦种植面积估算精度为目标,选取种植结构复杂的都市农业区,采用QuickBird影像数字化农田地块边界,以多时相TM影像为核心数据源,以地块为基本分类单元,进行不同特征向量组合、不同分类器的冬小麦地块分类方法研究,并对比分析了基于地块分类和基于像元分类的冬小麦种植面积估算精度。研究结果表明,基于地块分类的冬小麦种植面积估算方法的总量精度和位置精度均高于像元分类;植被指数和纹理信息的引入有助于进一步提高地块分类精度;支持向量机与最大似然均能得到高达97%的总量精度和90%的位置精度,支持向量机地块分类所需的训练样本量远低于最大似然,因此支持向量机更加适合于冬小麦地块分类;冬小麦错分与漏分情况大多发生在细碎地块,其面积总量较小,而大地块错分和漏分较少,因此相对于像元分类,地块分类能在整个区域能得到较高的冬小麦位置精度和总量精度。 相似文献
5.
高分辨率多光谱影像城区建筑物提取研究 总被引：4，自引：2，他引：2
城区高空间分辨率遥感数据由于存在大量同物异谱和异物同谱现象,应用传统的基于像元光谱分类的方法进行建筑物分类提取难以取得满意的效果。本文发展了一种从高分辨率Ikonos卫星影像上基于知识规则的面向对象分类提取城区建筑物方法,包括如下步骤：(1)融合1m全色和4m多光谱波段影像,生成1m分辨率的多光谱融合影像;（2）分割融合影像;（3）执行基于对象光谱的最近邻监督分类;（4）应用模糊逻辑分类器结合光谱、空间、纹理和上下文特征等知识规则进行建筑物分类。精度统计结果表明,本文提出的分类方法提取城区建筑物取得了93%的精度。 相似文献
6.
针对高分辨率遥感影像建筑物变化检测精度不高的问题,本文提出了一种改进城市建筑物变化检测方法。首先通过提取像元顶点构造像元图集,并以长宽比与矩形度作为变化检测测度,对后一期影像进行影像分割,识别建筑物轮廓对象。将建筑物轮廓进行几何关系筛选,完成建筑物变化信息提取。实验表明,该方法具有较高的变化检测精度,可明显削弱光照条件和成像角度对建筑物变化检测精度的影响,是一种普适性较强的城市建筑物变化检测方法。 相似文献
7.
基于龙岩市多时相Landsat TM/ETM+数据,应用最大似然、决策树及支持向量机分类方法对龙岩市景观类型进行分类.从3种分类方法的比较得知,支持向量机分类方法表现出较高的性能,分类精度明显高于其他的分类方法.因此选择最佳的支持向量机分类结果,并结合景观生态学方法,分析了1992-2008年龙岩市新罗区景观格局及其动态变化信息.结果表明,1992-2008年新罗区主城区农业用地大幅度降低,相应转化为建筑用地,但是却保持着良好的森林覆盖率.同时城市景观组分经历了由扩散式增长过程到粘合式集聚增长过程的转变,城市形态由不稳定形态逐步向稳定形态演化.整体上而言,城市景观呈现出破碎度变小、多样性降低和聚集度升高的发展趋势,建筑用地是龙岩市新罗区的主要景观类型. 相似文献
8.
Manoj Joseph S. Rama Subramoniam K. S. Srinivasan Suparn Pathak J. R. Sharma 《Journal of the Indian Society of Remote Sensing》2013,41(1):177-182
The potential of quad polarization radar data for the target discrimination has been analyzed. Quad polarization data of the RADARSAT-2 fine resolution mode has been utilized. Class separability analysis has been carried out on different polarization combinations using Transformed Divergence (TD) method and it is observed that HH-HV/VH-VV polarization combination gives better class separability when compared to other polarization combinations. Classification has been carried out on the optimized polarization combination using Maximum likelihood (MLC) and Support Vector Machine (SVM) classifiers. It is observed that SVM classification gives better classification accuracy compared to MLC. Overall classification accuracy is 93.03% for SVM and 88.78% for MLC. Class separability and classification accuracy comparison results are presented. 相似文献
9.
Optimizing support vector machine learning for semi-arid vegetation mapping by using clustering analysis 总被引：1，自引：0，他引：1
In remote sensing communities, support vector machine (SVM) learning has recently received increasing attention. SVM learning usually requires large memory and enormous amounts of computation time on large training sets. According to SVM algorithms, the SVM classification decision function is fully determined by support vectors, which compose a subset of the training sets. In this regard, a solution to optimize SVM learning is to efficiently reduce training sets. In this paper, a data reduction method based on agglomerative hierarchical clustering is proposed to obtain smaller training sets for SVM learning. Using a multiple angle remote sensing dataset of a semi-arid region, the effectiveness of the proposed method is evaluated by classification experiments with a series of reduced training sets. The experiments show that there is no loss of SVM accuracy when the original training set is reduced to 34% using the proposed approach. Maximum likelihood classification (MLC) also is applied on the reduced training sets. The results show that MLC can also maintain the classification accuracy. This implies that the most informative data instances can be retained by this approach. 相似文献
10.
快速、精准的建筑物变化检测对城市规划建设等业务管理具有重要意义。随着卫星遥感技术的快速发展,基于高分辨率遥感影像的建筑物变化检测得到了广泛关注。针对像元级建筑物变化检测方法往往精度不足而目标级建筑物变化检测方法过程烦琐等问题,本文提出结合像元级和目标级的高分辨率遥感影像建筑物变化检测方法。首先综合高分辨率遥感影像的多维特征,利用随机森林分类器进行影像集分类,以获取像元级建筑物变化检测结果;然后对后时相遥感影像进行图像分割,获得影像对象;最后融合像元级建筑物变化检测结果和影像对象,识别变化的建筑物目标。利用双时相QuickBird高分辨率遥感影像进行建筑物变化检测试验,结果表明：本文提出的方法能够削弱光照、观测角度等环境差异对建筑物变化检测的影响,显著改善建筑物变化的检测精度。 相似文献
11.
《ISPRS Journal of Photogrammetry and Remote Sensing》1999,54(1):50-60
Conventional multispectral classification methods show poor performance with respect to detection of urban object classes, such as buildings, in high spatial resolution satellite images. This is because objects in urban areas are very complicated with respect to both their spectral and spatial characteristics. Multispectral classification detects object classes only according to the spectral information of the individual pixels, while a large amount of spatial information is neglected. In this study, a technique is described which attempts to detect urban buildings in two stages. The first stage is a conventional multispectral classification. In the second stage, the classification of buildings is improved by means of their spatial information through a modified co-occurrence matrix based filtering. The direction dependence of the co-occurrence matrix is utilised in the filtering process. The method has been tested by using TM and SPOT Pan merged data for the whole area of the city of Shanghai, China. After the co-occurrence matrix based filtering, the average user accuracy increased by about 46% and the average Kappa statistic by about 57%. This result is about 26% better than the accuracy improvement through normal texture filtering. The method presented in this study is very useful for a rapid estimation of urban building and city development, especially in metropolitan areas of developing countries. 相似文献
12.
R. A. Alagu Raja V. Anand A. Senthil Kumar Sandeep Maithani V. Abhai Kumar 《Journal of the Indian Society of Remote Sensing》2013,41(1):35-43
Urban areas are the most dynamic region on earth. Their size has been constantly increased during the past and this process will go on in the future. Since there is no standard policy and guidelines for construction of buildings and urban planning, cities tend to have irregular growth. Many cities in the world face the problem of urban sprawl in its suburbs. So issues of urban sprawl need to be settled with the help of technologies such as satellite remote sensing and automated change detection. This paper presents a wavelet based post classification change detection technique that is applied to 1996 and 2004 MSS images of Madurai City, South India to determine the urban growth. The classification stage of the technique uses coilflet wavelet filter to correlate with the MSS land cover images of Madurai city to derive texture feature vector and this feature vector is inputted to a fuzzy-c means classifier, an unsupervised classification procedure. The post classification change detection technique is employed for identifying the newly developed urban fringe of the study area. The error matrix analysis is used to assess the accuracy of the change map. The performance of the presented technique is found superior than that of classical change detection methods such as image differencing, change vector analysis and principal component analysis. 相似文献
13.
A fuzzy topology-based maximum likelihood classification 总被引：2，自引：0，他引：2
Classification is one of the most widely used remote sensing analysis techniques, with the maximum likelihood classification (MLC) method being a major tool for classifying pixels from an image. Fuzzy topology, in which the set concept is generalized from two values, {0, 1}, to the values of a continuous interval, [0, 1], is a generalization of ordinary topology and is used to solve many GIS problems, such as spatial information management and analysis. Fuzzy topology is induced by traditional thresholding and as such gives a decomposition of MLC classes.Presented in this paper is an image classification modification, by which induced threshold fuzzy topology is integrated into the MLC method (FTMLC). Hence, by using the induced threshold fuzzy topology, each image class in spectral space can be decomposed into three parts: an interior, a boundary and an exterior. The connection theory in induced fuzzy topology enables the boundary to be combined with the interior. That is, a new classification method is derived by integrating the induced fuzzy topology and the MLC method. As a result, fuzzy boundary pixels, which contain many misclassified and over-classified pixels, are able to be re-classified, providing improved classification accuracy. This classification is a significantly improved pixel classification method, and hence provides improved classification accuracy. 相似文献
14.
Very high spatial and temporal resolution remote sensing data facilitate mapping highly complex and diverse urban environments. This study analyzed and demonstrated the usefulness of combined high-resolution aerial digital images and elevation data, and its processing using object-based image analysis for mapping urban land covers and quantifying buildings. It is observed that mapping heterogeneous features across large urban areas is time consuming and challenging. This study presents and demonstrates an approach for formulating an optimal land cover classification rule set over small representative training urban area image, and its subsequent transfer to the multisensor, multitemporal images. The classification results over the training area showed an overall accuracy of 96%, and the application of rule set to different sensor images of other test areas resulted in reduced accuracies of 91% for the same sensor, 90% and 86% for the different sensors temporal data. The comparison of reference and classified buildings showed ±4% detection errors. Classification through a transferred rule set reduced the classification accuracy by about 5%–10%. However, the trade-off for this accuracy drop was about a 75% reduction in processing time for performing classification in the training area. The factors influencing the classification accuracies were mainly the shadow and temporal changes in the class characteristics. 相似文献
15.
GF-2影像面向对象典型城区地物提取方法 总被引：5，自引：3，他引：2
国产高分遥感影像信息丰富,提供了精准的地物空间细节,深入研究高分数据处理及其提取城区地类目标信息的方法具有重要意义。本文以国产高分二号（GF-2）遥感影像为数据源,利用规则集的面向对象分类方法,通过ESP尺度分析工具选取得出最优分割尺度,建立各类地物的特征体系及分类规则,最终提取出研究区典型城区地物信息,并将之与传统基于像元的SVM监督分类结果作比较。结果表明：规则集的面向对象分类总体精度为92.23%,Kappa系数为0.9,比SVM监督分类有大幅度提高。对高分二号等高分辨率影像,面向对象的分类方法精度更高,图示效果更好,是城区地物提取的有效方法。 相似文献
16.
M. Izadi A. Mohammadzadeh A. Haghighattalab 《Journal of the Indian Society of Remote Sensing》2017,45(6):965-977
Tracking damaged roads and damage level assessment after earthquake is vital in finding optimal paths and conducting rescue missions. In this study, a new approach is proposed for the semi-automatic detection and assessment of damaged roads in urban areas using pre-event vector map and both pre and post-earthquake QuickBird images. In this research, damage is defined as debris of damaged buildings, presence of parked cars and collapsed limbs of trees on the road surface. Various texture and spectral features are considered and a genetic algorithm is used to find the optimal features. Subsequently, a support vector machine classification is applied to the optimal features to detect damages. The proposed method was tested on QuickBird pan-sharpened images from the Bam earthquake and the results indicate that an overall accuracy of 93% and a kappa coefficient of 0.91 were achieved for the damage detection step. Finally, an appropriate fuzzy inference system (FIS) and also an “Adaptive Neuro-Fuzzy Inference System” are proposed for the road damage level assessment. These results show that ANFIS has achieved overall accuracy of 94% in comparison with 88% of FIS. The obtained results indicate the efficiency and accuracy of the Neuro-Fuzzy systems for road damage assessment. 相似文献
17.
To have sustainable management and proper decision-making, timely acquisition and analysis of surface features are necessary. Traditional pixel-based analysis is the popular way to extract different categories, but it is not comparable by the achievements that can be achieved through the object-based method that uses the additional characteristics of features in the process of classification. In this paper, three types of classification were used to classify SPOT 5 satellite image in mapping land cover; Support vector machine (SVM) pixel-based, SVM object-based and Decision Tree (DT) pixel-based classification. Normalised Difference Vegetation Index and the brightness value of two infrared bands (NIR and SWIR) were used in manually developed DT classification. The classification of the SVM (pixel based) was generated using the selected groups of pixels that represent the selected features. In addition, the SVM (object based) was implemented by using radial-based function kernel. The classified features were oil palm, rubber, urban area, soil, water and other vegetation. The study found that the overall classification of the DT was the lowest at 69.87% while those of SVM (pixel based) and SVM (object based) were 76.67 and 81.25%, respectively. 相似文献
18.
Ming Shang Shi-Xin Wang Yi Zhou Cong Du 《Journal of the Indian Society of Remote Sensing》2018,46(9):1333-1340
In this study, we used Landsat-8 imagery to test object- and pixel-based image classification approaches in an urban fringe area. For object-based classification, we applied four machine learning classifiers: decision tree (DT), naive Bayes (NB), random trees (RT), and support vector machine (SVM). For pixel-based classification, we utilized the maximum likelihood classifier (MLC). Specifically, we explored the influence of repeated sampling on classification results with different training sample sizes. We found that (1) except the overall accuracy of NB, those of the other four classifiers increased as the training sample size increased; (2) repeated sampling had a significant effect on classification accuracy, especially for the DT and NB classifiers; and (3) SVM achieved the best classification accuracy. In addition, the performance of the object-based classifiers was superior to that of the pixel-based classifier. The results of this study can provide guidance on the training sample size and classifier selection. 相似文献
19.