首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到17条相似文献,搜索用时 250 毫秒
1.
渤海地区地震危险性特征及对工程抗震设防的启示   总被引:2,自引:0,他引:2  
本文分析了渤海海域地震构造环境及地震活动特征,总结了近年来对该地区潜在震源区划分的一些新认识,分析了地震危险性区划结果.在此基础上,引入地震危险性特征参数K对研究区进行地震危险性分区,通过不同场点的地震危险性曲线证明了地震环境造成的危险性差异,并以研究区内3个概率水准的地震动峰值加速度的比值统计证明了引入地震危险性分区的必要性.研究表明:(1)不同概率水准的地震动参数之间不存在固定的比例关系,受地震环境影响,地震危险性分区和地震动参数区划图结合使用可以更准确地反应地震危险性特征;(2)对于一般工程,根据地震动参数区划图所给的50年超越概率10%的地震动参数折算所得到的小震的地震作用不具有统一的概率水准,抗震设防目标的实现没有科学保证;海洋平台抗震设计中利用强度水平地震推算得到韧性水平地震作用也不具有统一的概率水准;(3)将地震危险性分区和地震动参数区划结合使用或编制统一抗倒塌水准的区划图是一般工程抗震设防的科学做法,对于海洋平台的抗震设防,宜明确韧性水平地震作用的概率水准.  相似文献   

2.
我国新的地震区划图(1990年版)是采用地震危险性慨率分析方法编制的。该图给出的是场点地震烈度值,该值在50年内被突破的概率为0.1。人们普遍关注该图与我国曾经编制的地震区划图(1957年版,1977年版)的区别,该图超越概率概念的内含和外延以及超越概率水平为什么采用50年超越概率0.1。本文围绕这些问题进行了讨论。分析结果表明,前两张地震区划图编图的基本着眼点都是地震预测,而新的地震区划着眼于场点的地震动预测。新的地震区划图是按场点地震危险性分析方法给出的,它所表示的地震危险性只能针对具体的场点,不能完全反映区域的地震危险性特征。而弄清场点地震危险性和区域地震危险性的差异是正确进行区域防灾对策的基础。作者希望这些讨论能对正确使用新的地震区划图有所裨益。  相似文献   

3.
新版地震区划图地震活动性模型与参数确定   总被引:11,自引:4,他引:7  
地震活动性模型和地震动预测模型是概率地震危险性分析的两个核心。在新版地震区划图中,依据板内地震活动空间不均匀性分布的特点,在概率地震危险性分析方法(CPSHA)中采用了由地震统计区、背景潜在震源区和构造潜在震源区构成的三级层次性潜在震源区模型,并构建了相应的地震活动性模型。本文在论述CPSHA方法及其地震活动性模型基本概念的基础上,重点介绍了新版地震区划图地震活动性模型的三级潜在震源区模型的构成、地震活动性假定和基本特点,同时,也对新版地震区划图地震活动性模型的重要参数确定思路、方法与结果进行了介绍。本文将为更好地认识与理解我国新版地震动参数区划图提供有益的参考。  相似文献   

4.
郎从  伍国春  高孟潭 《中国地震》2014,30(3):324-329
本文利用GIS技术,将全国地震重点监视防御区(重防区)县级行政单元边界分别与中华人民共和国地震动峰值加速度图和中国及邻区地震区带和潜在震源区划分图叠加,对各县分别计算了如下4个地震危险性指标:(1)县境内最高地震动峰值加速度等级;(2)县境内面积比例最大的地震动峰值加速度等级;(3)县境内最高潜在震源区震级上限等级;(4)县境内面积比例最大的潜在震源区震级上限等级.通过分类统计全国重防区县级行政单元的地震危险性分布,得到的结论是:虽然同为重防区但各地的地震危险性相差巨大.据此,建议根据地震危险性的不同在重防区采取如下措施:第一,不论是何种类型的重防区,均应按中国地震动参数区划图对新建工程做抗震设防,对已有建筑做抗震加固;第二,位于高地震危险性的区域,特别是位于具7级以上潜在地震危险的重防区,要加强与防灾有关的应急准备、城市规划、地震监测预报、地震应急响应等专门措施.  相似文献   

5.
美国地震区划图为编制和修订美国建筑物抗震规范设计提供了所需资料。为了能反映最新的认识水平,科学家经常修订地震区划图。满足现代抗震设计规范的建筑具有较好的抗震性能,不仅能减少人员伤亡,而且能使如生命线工程等正常运转。  相似文献   

6.
潘华  张萌 《地震学报》2022,44(5):743-751
为保证国土范围内建筑倒塌风险的一致性,提出了基于目标风险的地震区划图。该图通过求取地震危险性曲线与结构易损性曲线的卷积的风险积分方法计算目标风险。本文介绍了采用风险积分法确定基于目标风险的地震动参数的基本原理,回顾了这项技术在国内外研究与应用的最新进展。此外,还讨论了基于目标风险的地震区划图未来的发展及可能面临的问题。   相似文献   

7.
新版美国地震区划图源及其参数模型的分析与评述   总被引:6,自引:4,他引:2  
2008年版《美国地震危险性图》(本文称“美国地震区划图”)采用5种类型震源区模型。本文全面分析了这些震源模型的划分目的、划分原则、基本特征、用途、各类型源间的相互关系,及其地震活动性参数确定的原则与基本方法。评述了美国地震区划图震源区模型及其地震活动性参数确定的特点和存在的问题。以期为我国新一代地震动参数区划图编制提供参考。  相似文献   

8.
关于抗震设计规范与地震动区划图的有关探讨   总被引:1,自引:1,他引:0  
本文总结了国内外桥梁抗震设计规范和建筑结构抗震设计规范的设计思想和设计方法,介绍了我国和美国地震动参数区划图的发展和现状,对比分析了抗震规范使用地震区划图的情况。针对我国抗震设计规范和地震动参数区划图的现状,提出了两条建议:(1)地震动参数区划图编制部门应直接提供多水准的地震动参数区划图;(2)抗震设计规范应彻底抛弃设防烈度概念,以地震重现期取代原地震危险程度标示方法。  相似文献   

9.
湖南省中南部地区地震区划研究   总被引:3,自引:0,他引:3  
选择湖南省中南部地区作为研究区域,以编制《中国地震动参数区划图》的基础资料和近年来在湖南省中南部所作的工程场地地震安全性评价资料为基础,根据近年来对中强地震衰减关系的研究结果,以及1970年以来现代仪器记录得到的地震资料确定的研究区域背景地震活动水平及其参数,对湖南省中南部地区进行了新的地震区划研究。结果表明,考虑了中强地震衰减关系,并重新考虑背景地震活动水平后,湖南中南部地区地震区划结果与现行区划图相比,地震动峰值加速度达0·05g的区域显著增加,其中包括邵阳、湘潭、吉首、怀化等重要城市。研究结果与近年来湖南中南部地区发生的中小地震的高震害特征比较吻合。本文的研究结果对于地震活动主要以6级以下中强地震活动为主的我国中东部地区的地震区划研究以及编制新一代地震动参数区划图都具有重要的参考意义。  相似文献   

10.
借助GIS的空间操作和空间分析的功能对我国四张地震区划图(1957年发表的中国地震区域划分图、1977年颁布的中国地震烈度区划图、1990年颁布的中国地震烈度区划图和2001年颁布的中国地震动参数区划图)分别用发表以后大陆地区发生的、经震害调查的5级以上浅源地震的等震线与之叠合,统计出相应时段中实际发生的不同烈度区超过区划图上烈度1度、2度或更多的总面积及相应的百分比;根据各个区划图表达的地震危险性定义制定标准检验了相应的可靠程度。通过与相应时段地震人员伤亡、经济损失的对比分析,指出了地震区划方法的进一步改进要把重点放在提高对7级以上大地震可能发生部位的识别上。  相似文献   

11.
Li Ying 《中国地震研究》2007,21(4):379-387
Based on basic data used in compiling the Zonation Map of Earthquake Ground Motion Parameters in China, recent research on seismic safety assessment for engineering sites in central-southern Hunan Province, the new attenuation relationships of moderate earthquakes and the background seismicity data obtained by modern instrumental earthquake records since 1970, a new result of seismic zonation of central-southern Hunan Province is provided. The result shows that the area with PGA=0.05g has obviously increased in the new map compared with the previous one and is relatively consistent with the seismic disaster characteristics of moderate earthquakes that took place in the central-southern part of Hunan in recent years. This result will benefit the research and compilation of a new-generation seismic zonation map of earthquake ground motion parameters and the seismic hazard assessment in the moderate earthquake active regions in the central and eastern part of China.  相似文献   

12.
新一代强制性国家标准《中国地震动参数区划图》(GB 18306—2015)已于2016年6月1日正式实施,它是保障人民生命财产安全和社会经济可持续发展的重要标准。借助日益普及的移动智能终端和快速发展的互联网技术,我们面向公众服务和行业应用,分别研发了地震动参数区划图APP(Android和iOS版)及B/S架构的数据库管理系统,对新一代区划图所涉及的“四级地震作用”、“土层影响双参数调整”等技术方法进行无纸化、自动化和智能化处理。此外,针对市县基层防震减灾管理工作的特点和需求,为新一代区划图提供了一套实用的信息服务系统。该服务系统在部分市县工作部门进行了推广和试用,取得了良好的效果。  相似文献   

13.
The New Seismic Zoning Map of China was prepared from 1987 to 1990 and officially promulgated in 1991.In comparison with the previous two seismic zoning maps prepared in 1957 and 1977,some new methods were applied to upgrade the method currently used for seismic hazard analysis.First,a probabilistic method was used instead of the deterministic analysis was used for previous mapping.Second,by taking advantages of the long history of historical seismic data in China,the nonhomogeneity of seismicity both in space and in time has been fully considered and hence the over-and/or underestimation of seismic hazard could be avoided.Third,the results of middle-and long-term earthquake prediction based on tectonic evidence have been incorporated into seismic hazard analysis.In addition,the attenuation laws for both intensity and peak acceleration of strong motion as the mapping parameters are also presented.Finally,an evaluation of the New Seismic Map and its effect on engineering application,such as aseismic desi  相似文献   

14.
山东省场地类别分布及地震动峰值加速度区划调整   总被引:1,自引:1,他引:0  
首先,本文搜集了山东省5220个建设工程场地的资料,引入"分布区"的概念,统计分析了山东省场地类别的区域分布并进行了分区。然后,根据《中国地震动参数区划图(GB18306-2015)》中的山东省地震动峰值加速度区划以及Ⅲ类场地调整系数,对山东省Ⅲ类场地分布区的地震动峰值加速度区划进行了调整,得到了考虑场地类别分区的山东省地震动峰值加速度区划图,增进了对山东省地震灾害风险空间分布的认识。结果表明,山东省场地类别分布与地貌分区有很强的相关性,Ⅰ-Ⅱ类场地分布区包括鲁中南山地丘陵区(西南部的山间平原地带除外)以及鲁东丘陵区,Ⅲ类场地分布区包括鲁西北-鲁西南平原区和鲁中南山地丘陵区西南部山间平原地带。Ⅰ-Ⅱ类场地分布区约占全省陆地面积的59.5%,Ⅰ-Ⅱ类场地分布区与Ⅲ类场地分布区的面积比例约为1.47。地震动峰值加速度区划图经过调整后,Ⅶ度及以上设防区域占全省陆地面积的比例由79%提高到90%,10个地级市的峰值加速度有提高。  相似文献   

15.
In a seismic design, the dynamic loads are generally dependent on the inertial interaction caused by earthquake. But for the foundations embedded in soil, the dynamic loads are influenced by both the inertial and kinematic interactions among superstructure, foundation and soil. Especially, when a foundation is embedded in soft surface ground, the effects due to the kinematic interaction increase and should be considered in seismic design. For this reason, a method called seismic deformation method (SDM), which is suitable for an intensive earthquake motion (level 2 earthquake motion), has been stipulated recently in a new design code called Seismic Design Code for railway structures (the Railway Code, drawn up by Railway Technical Research Institute, Japan, 1999) [Railway Technical Research Institute. Seismic Design Code for railway structures. Tokyo: Maruzen; 1999]. In order to grasp the suitability of the SDM to actual structures, pile foundations, which experienced the Hyogoken-Nanbu earthquake, were taken as the objects for investigations. Comparison studies between the SDM analysis and reconnaissance were conducted. As a result, the adequacy of the SDM to actual foundations was confirmed to prove good agreement between the two results from the viewpoint of engineering practice.In addition, determination of indices for seismic-performance evaluation and speculation of damage mechanism of the foundations are also discussed in this paper.  相似文献   

16.
官幼雄 《华南地震》2019,39(1):71-75
地震安全性评价是防震减灾的重要措施之一。地震危险性分析是地震安全性评价的基础。论文利用安全性评价基本理论和方法对广东省的地震危险性进行分析。以广东省历史上发生的中强地震目录作为研究基础,分析了广东省的地质构造特点和断裂特点,划分潜在地震源、确定地震活动性参数,建立了地震发生概率模型,通过计算得出地震带的综合影响。研究结果表明广东省内具有发生7.5、 6.5、 6.0、 5.5级级段地震的发震条件,其中沿海地区是广东省中、强地震的主要发震区域。  相似文献   

17.
Safety against earthquake hazards presents two aspects: structural safety against potentially destructive dynamic forces and site safety related to geotechnical phenomena, such as amplification, landsliding and soil liquefaction. The correct evaluation of seismic hazard is, therefore, highly affected by risk factors due to geological nature and geotechnical properties of soils. In response to these new developments, several attempts have been made to identify and appraise geotechnical hazards and to represent them in the form of zoning maps, in which locations or zones with different levels of hazard potential are identified. The geotechnical zonation of the subsoil of the city of Catania (Italy) suggests a high vulnerability of the physical environment added to site amplification of the ground motion phenomena. The ground response analysis at the surface, in terms of time history and response spectra, has been obtained by some 1D equivalent linear models and by a 2D linear model, using a design scenario earthquake as input at the conventional bedrock. In particular, the study has regarded the evaluation of site effects in correspondence of the database of about 1200 boreholes and water-wells available in the data-bank of the Catania area. According to the response spectra obtained through the application of the 1D and 2D models, the city of Catania has been divided into some zones with different peak ground acceleration at the surface, to which corresponds a different value of the Seismic Geotechnical Hazard. A seismic microzoning map of the urban area of the city of Catania has been obtained. The map represents an important tool for the seismic improvement of the buildings, indispensable for the mitigation of the seismic risk.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号