首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到17条相似文献,搜索用时 140 毫秒
1.
利用概率地震危险性分析(CPSHA)方法,对山东某场地进行地震危险性分析,通过对该场地划分潜在震源区,确定地震活动性参数及地震动衰减关系,计算分析地震危险性概率,基本确定对该场地地震动峰值加速度起主要贡献的几个潜在震源区及贡献值,并确定该场地50年超越概率10%的水平向基岩地震动加速度峰值。结果发现,CPSHA方法以具体的构造尺度和更加细致的构造标志来划分潜在震源区,使潜在震源区规模缩减,从而更能反映地震活动在空间分布上的不均匀性。  相似文献   

2.
在我国当前地震安全性评价中,普遍使用考虑地震活动时空不均匀性的概率地震危险性分析方法(CP-SHA),它规定以地震带为统计区域计算地震活动性参数b值和v4值。正在编制的中国地震动区划图(五代图)提出了针对潜在震源区进行三级划分原则:划分地震带、地震带上划分地震构造区、地震构造区内再划分潜在震源区。本文提出以地震构造区为统计区域回归统计方法计算b值和v4值,然后进行概率危险性分析计算,这样得到的结果可能更为合理。  相似文献   

3.
新版美国地震区划图源及其参数模型的分析与评述   总被引:6,自引:4,他引:2  
2008年版《美国地震危险性图》(本文称“美国地震区划图”)采用5种类型震源区模型。本文全面分析了这些震源模型的划分目的、划分原则、基本特征、用途、各类型源间的相互关系,及其地震活动性参数确定的原则与基本方法。评述了美国地震区划图震源区模型及其地震活动性参数确定的特点和存在的问题。以期为我国新一代地震动参数区划图编制提供参考。  相似文献   

4.
地震巨灾保险是降低地震灾害风险的有效手段之一,而地震危险性分析是地震巨灾模型的主要分析模块之一。传统的概率地震危险性分析主要是基于潜在震源模型、地震活动性模型和地震动衰减模型等并采用概率方法得到场点的地震危险性值,该危险性表示的是未来所有地震对场点的综合影响。然而,在使用地震巨灾模型进行地震风险分析时需要用到单个地震事件对场点的影响,这就需要根据潜在震源区生成一系列单个地震事件,并计算每个事件对场点的影响。本研究采用蒙特卡洛方法,基于第五代中国地震动参数区划图中所采用的地震活动性模型(潜在震源区及其地震活动性参数),模拟符合我国地震活动时间、空间和强度分布特征的地震事件集。模拟时遵从的基本理论为:地震发生在时间上符合泊松分布,震级分布可用古登堡-里克特定律来描述,空间分布特征则用潜在震源区及其地震发生率来描述。模拟得到的地震事件包含以下参数:时间(年、月、日)、地点(经度、纬度)、深度、震级、断层走向以及衰减特征等。该模拟地震事件集可满足地震巨灾模型中地震风险分析的需求,已应用于我国地震巨灾模型中。  相似文献   

5.
杨勇  史保平  孙亮 《地震学报》2008,30(2):198-208
采用了分布式地震活动性模型. 该模型无需潜在震源区划分,同时简化了地震危险性概率分析方法. 根据破坏性地震目录建立了3个地震活动性模型,利用高斯光滑函数获得了华北区域内的a值分布特征,使用3种典型的衰减模型,分别计算了50年内超越概率10%, 5%和2%的地震动峰值加速度分布. 其分析结果显示了峰值加速度分布特征与我国第四代区划图大体一致,特定地震活动区(太原、 石家庄等地区)的峰值加速度略高于第四代区划图的结果,而这种峰值加速度分布特征与该地区较高的地震活动性特征是一致的. 概率危险性曲线结果表明,唐山、太原和北京等地区的潜在地震危险性比华北区域内其它城市高.   相似文献   

6.
本文采用了空间光滑地震活动性模型,该模型无需潜在震源区划分,同时发展了概率地震危险性分析新方法。根据三种地震目录资料建立了三种地震活动性模型,利用高斯光滑函数获得了湖南区域内的比值分布特征,使用了两种典型的衰减模型,计算了50年内超越概率10%的地震动峰值加速度(PGA)分布。其分析结果显示PGA分布特征与中国地震动参数区划图大体一致,部分区域PGA提高,PGA达0.05g的区域显著扩大,其中包括邵阳、湘潭、吉首、怀化等重要城市,而这种PGA分布特征与该地区地震活动性特征是一致的。概率危险性曲线的结果表明常德等地区的潜在地震危险性比湖南区域内其他城市高。表明此模型用于地震危险性计算中是简便易行的,且具有较高的精度。尤其对于地质和地震构造信息缺乏的弱震区和中强震区,该方法作为替代方法并有着广泛的应用价值。  相似文献   

7.
潜在震源区地震活动性参数、地震动衰减关系对地震危险性分析结果至关重要。以中国第五代地震动区划图潜在震源区划分方案为基础,采用2类震级分档分别建立自编及五代图潜在震源区空间分布函数,收集4组青藏高原及周缘地区地震动衰减关系,采用不同组合对青藏工程走廊沿线的81个场点进行概率地震危险性分析计算,得到50年超越概率10%(地震重现期475年)的各场点基岩地震动峰值加速度(PGA),并转换为一般场地(Ⅱ类)PGA,对计算结果进行对比分析,并与第五代地震动区划图归档上下限值进行比较。结果显示:采用我国西部地区地震动衰减关系计算得到的PGA最大,采用云南地区地震动衰减关系得到的PGA最小,采用川藏地区及青藏高原东北缘地震动衰减关系时居中;在同一地震动衰减关系下,采用自编空间分布函数计算得到的PGA普遍略大于采用第五代图空间分布函数时;在震级上限为8.5的潜在震源区及附近地区,潜在震源区空间分布函数震级分档对计算结果有显著影响。综合分析表明,采用自编Ⅱ型震级分档空间分布函数方案与川藏地区地震动衰减关系组合方案的计算结果最为理想。最后,采用该组合方案对青藏工程走廊50年超越概率10%的基岩场地PGA及一般场地PGA进行了区划。  相似文献   

8.
渤海地区地震危险性特征及对工程抗震设防的启示   总被引:2,自引:0,他引:2  
本文分析了渤海海域地震构造环境及地震活动特征,总结了近年来对该地区潜在震源区划分的一些新认识,分析了地震危险性区划结果.在此基础上,引入地震危险性特征参数K对研究区进行地震危险性分区,通过不同场点的地震危险性曲线证明了地震环境造成的危险性差异,并以研究区内3个概率水准的地震动峰值加速度的比值统计证明了引入地震危险性分区的必要性.研究表明:(1)不同概率水准的地震动参数之间不存在固定的比例关系,受地震环境影响,地震危险性分区和地震动参数区划图结合使用可以更准确地反应地震危险性特征;(2)对于一般工程,根据地震动参数区划图所给的50年超越概率10%的地震动参数折算所得到的小震的地震作用不具有统一的概率水准,抗震设防目标的实现没有科学保证;海洋平台抗震设计中利用强度水平地震推算得到韧性水平地震作用也不具有统一的概率水准;(3)将地震危险性分区和地震动参数区划结合使用或编制统一抗倒塌水准的区划图是一般工程抗震设防的科学做法,对于海洋平台的抗震设防,宜明确韧性水平地震作用的概率水准.  相似文献   

9.
新编制的地震动参数区划图采用了潜在震源区三级划分方案,以体现背景地震活动空间分布的不均匀性,并在地震构造区内归纳出统一的地震构造模型。本文根据西南地区潜在震源区三级划分的成果,分析了龙门山地震统计区内的龙门山和成都地震构造区的基本特征,历史地震活动强度及频度,主要活动构造的构造变形样式,建立了地震构造区的发震构造模型,确定了构造区的本地地震及划分构造源的地震构造标志。同时,提出了确定背景源空间分布函数的简单方法。  相似文献   

10.
概率分配模型及其在地震危险性分析中的应用   总被引:1,自引:0,他引:1  
本文提出了一种由地震区(带)的地震发生概率确定潜在震源区发震概率的概率分配模型。这一模型具有以下特点:1.地震区(带)的地震发生概率控制并确定了潜在震源区的发震概率,这一原则完全遵从概率论的基本原理;2.模型中用于描述地震发生过程的随机模型,对潜在震源区的发震概率不再起决定性作用,从而大大降低了由此而带来的不确定性。将概率分配模型与目前用于新的中国地震区划图编制工作中的地震平均年发生率分配方法进行了比较,结果表明,二者对华北地区的应用结果相差不大。但进一步的分析表明,当地震活动水平较高时,后一方法可能会低估潜在震源区的地震危险性。  相似文献   

11.
为新区划图编制所建立的地震动衰减关系   总被引:22,自引:6,他引:16  
介绍了建立新一代地震区划图所采用的地震动参数衰减关系的总体思路,并从资料、衰减关系分区、衰减关系模型、回归方法、转换等方面说明了地震动参数衰减关系的建立过程,给出了我国分区地震烈度和地震动参数衰减关系结果。新的地震动衰减关系的建立,具有如下特点:一是基于更加丰富可靠的强震记录和烈度资料;二是采用了具有大震近场饱和特征的地震动衰减模型;三是采用了使结果更加稳定的分步回归方法;四是在地震动衰减关系分区时考虑了地震活动性特征。与第四代地震区划图衰减关系相比,由于地震动衰减模型的变化和高震级强震记录的增加,高震级下的峰值加速度有所降低,而中强地震区的峰值加速度则在低震级时有所提高。  相似文献   

12.
The Seismic Intensity Zoning Map of China(1990)was based on the probabilistic method of seismic hazard analysis.In compiling the map,the characteristics of inhomogeneity of earthquake distribution both in space and time in China are considered sufficiently,and some necessary modifications in the model of seismic hazard analysis are carried out.Based on the analysis of the seismic activity and seismotectonic environment,26 seismic provinces are divided first as the statistical elements of the seismicity analysis; the seismic potential source areas are then divided in the seismic provinces.The 733 potential source areas with various upper limit magnitudes have been divided in the country.According to the reliable time domain of earthquake data with various magnitude intervals,the b values in magnitude-frequency relationship are calculated in the seismic provinces.According to the analysis of the inhomogeneity of seismicity distribution both in space and time,the annual average occurrence rates of the eart  相似文献   

13.
We developed a seismic hazard model for Taiwan that integrates all available tectonic, seismicity, and seismic hazard information in the region to provide risk managers and engineers with a model they can use to estimate earthquake losses and manage seismic risk in Taiwan. The seismic hazard model is composed of two major components: a seismotectonic model and a ground-shaking model. The seismotectonic model incorporates earthquakes that are expected to occur on the Ryukyu and Manila subduction zones, on the intermediate-depth Wadati-Benioff seismicity zones, on the active crustal faults, and within seismotectonic provinces. The active crustal faults include the Chelungpu fault zone, the source of the damaging MW 7.6 Chi-Chi earthquake, and the Huangchi-Hsiaoyukeng fault zone that forms the western boundary of the Taipei Basin. The ground-shaking model uses both US, worldwide, and Taiwanese attenuation relations to provide robust estimates of peak ground acceleration and response spectral acceleration on a reference site condition for shallow crustal and subduction zone earthquakes. The ground shaking for other site conditions is obtained by applying a nonlinear soil-amplification factor defined in terms of the average shear-wave velocity in the top 30 m of the soil profile, consistent with the methodology used in the current US and proposed Taiwan building codes.  相似文献   

14.
The occurrence of the Algiers earthquake (M 6.8) of May 21, 2003, has motivated the necessity to reassess the probabilistic seismic hazard of northern Algeria. The fact that this destructive earthquake took place in an area where there was no evidence of previous significant earthquakes, neither instrumental nor historical, strongly encourages us to review the seismic hazard map of this region. Recently, the probabilistic seismic hazard of northern Algeria was computed using the spatially smoothed seismicity methodology. The catalog used in the previous computation was updated for this review, and not only includes information until June 2003, but also considers a recent re-evaluation of several historical earthquakes. In this paper, the same methodology and seismicity models are utilized in an effort to compare this methodology against an improved and updated seismic catalog. The largest mean peak ground acceleration (PGA) values are obtained in northernmost Algeria, specifically in the central area of the Tell Atlas. These values are of the order of 0.48 g for a return period of 475 years. In the City of Algiers, the capital of Algeria, and approximately 50 km from the reported epicenter of this latest destructive earthquake, a new mean PGA value of 0.23 g is obtained for the same return period. This value is 0.07 g greater than that obtained in the previous computation. In general, we receive greater seismic hazard results in the surrounding area of Algiers, especially to the southwest. The main reason is not this recent earthquake by itself, but the significant increase in the mmax magnitude in the seismic source where the city and the epicenter are included.  相似文献   

15.
A seismic source model is presented for use in probabilistic seismic hazard analyses to be conducted for sites within the Buller–NW Nelson region of New Zealand. The application of common probabilistic seismic hazard analysis (PSHA) methodology for sites in this region has been complicated by the long-held suspicion that the observed rates of seismic activity are high and not representative of long-term earthquake activity. However, recent analyses of geological, seismicity and geodetic data indicate that the extent of this anomaly may have been overestimated and that current rates of seismic activity within this region are likely to continue into the foreseeable future. Probable bounds for the most appropriate long-term rates of seismic activity are estimated after considering all available sources of constraint. These include geodetic analyses, plate-motion modelling, finite element modelling, structural geological considerations, paleoseismic information, tree-ring analyses, precarious rock information, observed seismicity and fundamental mechanics. A suite of fault sources is identified, and the observed seismicity is partitioned between these sources and a background source using Bayesian inference, and then analysed to obtain a magnitude–frequency distribution for each seismic source. The annual moment release rate for the region, resulting from the identified and characterised sources, is shown to be consistent with available constraints. Consequently, it is demonstrated that the observed seismicity in the Buller–NW Nelson region can be used to model future earthquake occurrence within the region and that standard PSHA may therefore be implemented within the region.  相似文献   

16.
现行的地震危险性分析方法是经过潜在震源区划分、地震活动性参数和衰减关系的确定,以及基岩地震动参数的计算而作为基础资料的历史强震目录,同时也是通过历史地震记载的分析得到的。然而,在其每一个环节都存在不确定性,而现有的不确定校正很难达到满意的程度。本文设想仅仅利用历史地震的史料记载,依据最大似然法,计算场地的各不同年份不同超越概率的地震危险性。以怀来、河间、唐山、承德、宁晋、石家庄为例,并仅仅以这些场地的历史记载为依据,不考虑推测的影响烈度,计算这些场地的危险性分析结果,并与中国地震烈度区划图(1990)的结果进行比较,由此来说明本方法具有一定的可利用性。  相似文献   

17.
川滇地区是我国地震危险性较高的地区之一.本文基于对特大强震的风险性考虑,使用全球地震模型OpenQuake软件,建立了川滇地区地震危险性预测新模型.首先根据构造特征划分多个震源分区,并整理出这些震源分区内断层活动特征与滑动速率;基于震源分区和断层模型,使用GPS应变率转换成的锥形古登堡-里克特关系作为整个区域的地震积累率,并允许超过历史最大震级的特大地震的出现,结合活动断层滑动速率所积累的地震发生率,给出震源分区内断层地震源和背景地震源的地震发生率的比率分配关系;在活动断层分段上,保留了大型断裂或其主要部分,没有根据小的阶区来对断层进行详细分段,以便分配特大地震发生率;并使用地震率平滑方法分配背景地震发生率.最后在OpenQuake中加入地震动预测方程,计算出了川滇地区的PGA分布图,为区域地震危险性提供科学依据.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号