首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献，搜索用时 218 毫秒
1.
The 3-D P- and S-wave velocity models of the upper crust beneath Southwest Iberia are determined by inverting arrival time data from local earthquakes using a seismic tomo~raphy method. We used a total of 3085 P- and 2780 S-wave high quality arrival times from 886 local earthquakes recorded by a per- manent seismic network, which is operated by the Institute of Meteorology （IM）, Lisbon, Portugal. The computed P- and S-wave velocities are used to determine the 3-D distributions of Vp/Vs ratio. The 3-D velocity and Vp/Vs ratio images display clear lateral heterogeneities in the study area. Significant veloc- ity variations up to ~6% are revealed in the upper crust beneath Southwest lberia, At 4 km depth, both P- and S-wave velocity take average to high values relative to the initial velocity model, while at 12 km, low P-wave velocities are clearly visible along the coast and in the southern parts. High S-wave velocities at 12 km depth are imaged in the central parts, and average values along the coast; although some scattered patches of low and high S-wave velocities are also revealed. The Vp/Vs rztio is generally high at depths of 4 and 12 km along the coastal parts with some regions of high Vp/Vs ratio in the north at 4 km depth, and low Vp/Vs ratio in the central southern parts at a depth of 12 km, The imaged low velocity and high Vp/Vs ratios are related to the thick saturated and unconsolidated sediments covering the region; whereas the high velocity regions are generally associated with the Mesozoic basement rocks.  相似文献   

2.
In this study, we compiled and analyzed 69310 P-wave travel-time data from 6639 earthquake events. These events (M ≥ 2.0) occurred from 1980s to June 2019 and were recorded at 319 seismic stations (Chinese Earthquake Networks Center) in the study area. We adopted the double-difference seismic tomographic method (tomoDD) to invert the 3-D P-wave velocity structure and constrain the crust-upper mantle architecture of the Middle and Lower Reaches of the Yangtze River Metallogenic Belt (MLYB). A 1-D initial model extracted from wide-angle seismic profiles was used in the seismic tomography, which greatly reduced the inversion residual. Our results indicate that reliable velocity structure of the uppermost mantle can be obtained when Pn is involved in the tomography. Our results show that: (1) the pattern of the uppermost mantle velocity structure corresponds well with the geological partitioning: a nearly E–W-trending low-velocity zone is present beneath the Dabie Orogen, in contrast to the mainly NE-trending low-velocity anomalies beneath the Jiangnan Orogen. They suggest the presence of thickened lower crust beneath the orogens in the study area. In contrast, the Yangtze and Cathaysia blocks are characterized by relatively high-velocity anomalies; (2) both the ultra-high-pressure (UHP) metamorphic rocks in the Dabie Orogen and the low-pressure metamorphic rocks in the Zhangbaling dome are characterized by high-velocity anomalies. The upper crust in the Dabie Orogen is characterized by a low-velocity belt, sandwiched between two high velocity zones in a horizontal?direction, with discontinuous low-velocity layers in the middle crust. The keel of the Dabie Orogen is mainly preserved beneath its northern section. We infer that the lower crustal delamination may have mainly occurred in the southern Dabie Orogen, which caused the mantle upwelling responsible for the formation of the granitic magmas emplaced in the middle crust as the low-velocity layers observed there. Continuous deep-level compression likely squeezed the granitic magma upward to intrude the upper crustal UHP metamorphic rocks, forming the ‘sandwich’ velocity structure there; (3) high-velocity updoming is widespread in the crust-mantle transition zone beneath the MLYB. From the Anqing-Guichi ore field northeastward to the Luzong, Tongling, Ningwu and Ningzhen orefields, high-velocity anomalies in the crust-mantle transition zone increase rapidly in size and are widely distributed. The updoming also exists in the crust-mantle transition zone beneath the Jiurui and Edongnan orefields, but the high-velocity anomalies are mainly stellate distributed. The updoming high-velocity zone beneath the MLYB generally extends from the crust-mantle transition zone to the middle crust, different from the velocity structure in the upper crust. The upper crust beneath the Early Cretaceous extension-related Luzong and Ningwu volcanic basins is characterized by high velocity zones, in contrast to the low velocity anomalies beneath the Late Jurassic to Early Cretaceous compression-related Tongling ore field. The MLYB may have undergone a compressive-to-extensional transition during the Yanshanian (Jurassic–Cretaceous) period, during which extensive magmatism occurred. The near mantle–crustal boundary updoming was likely caused by asthenospheric underplating at the base of the lower crust. The magmas may have ascended through major crustal faults, undergoing AFC (assimilation and fractional crystallization) processes, became emplaced in the fault-bounded basins or Paleozoic sequences, eventually forming the many Cu-Fe polymetallic deposits there.  相似文献   

3.
On the basis of a one-by-one latitude-longitude grid three-dimensional seismic velocity model, the crustal P-wave velocity structure in eastern China (105-125°E and 18-41°N) is obtained, and a set of geotherms for each grid is established for P-T correction on P-wave velocities. The average depths of sub-crustal layers and their average P-wave velocities of 18 tectonic units in eastern China are exhibited. Our result presents a 32-34 km thick crust beneath eastern China, which is thinner than previous studies, with an average velocity of 6.54 km/s, corresponding to a 5 kg/m3 variation in crustal mean density. The thicker upper but thinner middle and lower crust results in a lower average seismic velocity of eastern China. An intermediate crustal composition with a SiO2 content of 59.7 wt% has been estimated. However, there exists a significant lateral variation in the crustal structures among the tectonic units of eastern China. The structure and composition features of some regions in eastern China in  相似文献   

4.
The crust-mantle transition zone (CMTZ) is an important site for mass and energy exchange between the lower crust and upper mantle. Several kinds of CMTZ exist beneath the continent of China, which show different seismic reflection characteristics and are composed of different rock associations. In this paper, we identify three types of CMTZ in the continent of China. (a) The CMTZ beneath the Tibet Plateau exhibits a grid-shaped seismic reflection characterized by random and reticular high and low seismic velocity lamellae. It is about 30 km thick, comprising both mafic granulites of lower crust and ultramafic rocks of upper mantle. Such lithological association and seismic velocity structure were inherited from the crustal overthrust and overlapping during the Cenozoic collision between the Indian and Euro-Asian continents; The corresponding crust movement is still very intense in this region. (b) The CMTZ underneath North China Block is usually composed of a thinner strong positive velocity gradient l  相似文献   

5.
Geophysical studies point to a complex tectonic and geodynamic evolution of the Alboran Basin and Gulf of Cadiz.Tomographic images show strong seismic waves velocity contrasts in the upper mantle.The high velocity anomaly beneath the Alboran Sea recovered by a number of studies is now a well established feature.Several geodynamic reconstructions have been proposed also on the base of these images.We present and elaborate on results coming from a recent tomography study which concentrates on both the Alboran and the adjacent Atlantic region.These new results,while they confirm the existence of the fast anomaly below the Alboran region,also show interesting features of the lithosphere-asthenosphere system below the Atlantic.A high velocity body is imaged roughly below the Horseshoe Abyssal plain down to sub-lithospheric depths.This feature suggests either a possible initiation or relic subduction.Pronounced low velocity anomalies pervade the upper mantle below the Atlantic region and separate the lithospheres of the two regions.We also notice a strong change of the upper mantle velocity structure going from south to north across the Gorringe Bank.This variation in structure could be related to the different evolution in the opening of the central and northern Atlantic oceans.  相似文献   

6.
The special seismic tectonic environment and frequent seismicity in the southeastern margin of the Qinghai–Tibet Plateau show that this area is an ideal location to study the present tectonic movement and background of strong earthquakes in mainland China and to predict future strong earthquake risk zones. Studies of the structural environment and physical characteristics of the deep structure in this area are helpful to explore deep dynamic effects and deformation field characteristics, to strengthen our understanding of the roles of anisotropy and tectonic deformation and to study the deep tectonic background of the seismic origin of the block's interior. In this paper, the three-dimensional(3D) P-wave velocity structure of the crust and upper mantle under the southeastern margin of the Qinghai–Tibet Plateau is obtained via observational data from 224 permanent seismic stations in the regional digital seismic network of Yunnan and Sichuan Provinces and from 356 mobile China seismic arrays in the southern section of the north–south seismic belt using a joint inversion method of the regional earthquake and teleseismic data. The results indicate that the spatial distribution of the P-wave velocity anomalies in the shallow upper crust is closely related to the surface geological structure, terrain and lithology. Baoxing and Kangding, with their basic volcanic rocks and volcanic clastic rocks, present obvious high-velocity anomalies. The Chengdu Basin shows low-velocity anomalies associated with the Quaternary sediments. The Xichang Mesozoic Basin and the Butuo Basin are characterised by lowvelocity anomalies related to very thick sedimentary layers. The upper and middle crust beneath the Chuan–Dian and Songpan–Ganzi Blocks has apparent lateral heterogeneities, including low-velocity zones of different sizes. There is a large range of low-velocity layers in the Songpan–Ganzi Block and the sub–block northwest of Sichuan Province, showing that the middle and lower crust is relatively weak. The Sichuan Basin, which is located in the western margin of the Yangtze platform, shows high-velocity characteristics. The results also reveal that there are continuous low-velocity layer distributions in the middle and lower crust of the Daliangshan Block and that the distribution direction of the low-velocity anomaly is nearly SN, which is consistent with the trend of the Daliangshan fault. The existence of the low-velocity layer in the crust also provides a deep source for the deep dynamic deformation and seismic activity of the Daliangshan Block and its boundary faults. The results of the 3D P-wave velocity structure show that an anomalous distribution of high-density, strong-magnetic and high-wave velocity exists inside the crust in the Panxi region. This is likely related to late Paleozoic mantle plume activity that led to a large number of mafic and ultra-mafic intrusions into the crust. In the crustal doming process, the massive intrusion of mantle-derived material enhanced the mechanical strength of the crustal medium. The P-wave velocity structure also revealed that the upper mantle contains a low-velocity layer at a depth of 80–120 km in the Panxi region. The existence of deep faults in the Panxi region, which provide conditions for transporting mantle thermal material into the crust, is the deep tectonic background forthe area's strong earthquake activity.  相似文献   

7.
In this paper, 3-D velocity images of the crust and upper mantle beneath the Nanbei tectonic zone of China are constructed using P-wave travel time residuals of earthquakes, with the data supplied by China's seismic networks and the International Seismic Centre.During the model parameterization in the tomographic inversion the interpolation function of grid node velocities is used as the space function of velocity, and the velocity function is allowed to be discontinuous. The difficulties caused by large memory demand and high computing cost in solving the system of equations are avoided by utilizing the least squares QR decomposition algorithm. Thus, the stability of the algorithm is ensured. Though resolution images are not derived in the inversion process based on the resolution theory of Backus and Gilbert, a covariance resolution method is put forward by the authors. The resolution analyses have proved the reliability of the image results. 3-D ray tracing is conducted to obtain the ray paths in a s  相似文献   

8.
The Crustal Structure and Seismic Activity in North China   总被引：1，自引：0，他引：1  
A layered crustal block model of North China has been constructed based on large amount of data from seismic sounding carried out in recent two decades. Some deep fault zones, such as the Zhangjiakou.Penglai and Tancheng-Lujiang fault zones, divide the upper crust of North China into three upper crustal terranes and nine bolcks. There are distinct differences in velocity and depth distributions, which reflects Cenozoic block faulting in North China in the process of formation of the deep structure. The upper crust shows the features of transition in isostatic adjustment. The existence of a low-velocity layer in the middle crust is characteristic of the crustal structure in North China. There seems to be an increase of rheology of the rocks in the lower crust and a persistence of stable regional stress field. The patterns of the Moho on two sides of the Yanshan-Taihang Mountains are different. The relief of the Moho around Beijing, Shijiazhuang and Guangrao where the deep faults join together shows a quadrantal distribution in some degree. The dynamic sources for seismic activity are the NE-SW horizontal compression and the diapirism of the upper mantle. The middle and upper crust, especially the layered block structure has the most significant effects on seismicity, and the occurrence of earthquakes is more closely related to them than to the Moho.  相似文献   

9.
Three-Dimensional P-Wave Velocity Structure of the Crust of North China   总被引：2，自引：0，他引：2  
Since the Xingtai (邢台) earthquake in 1966,China Earthquake Administration has carried out a survey campaign along more than thirty deep seismic sounding (DSS) profiles altogether about twenty thousand kilometers long in North China to study the velocity structure of the crust and the upper mantle in this region,and has obtained a great number of research findings. However,these researches have not provided a 3D velocity structure model of the crust of North China and cannot provide seismic evidence for the study of the deep tectonic characteristics of the crust of the whole region. Hence,based on the information from the published data of the DSS profiles,we have chosen 14 profiles to obtain a 3D velocity structure model of North China using the vectorization function of the GIS software (Arc/Info) and the Kriging data gridding method. With this velocity structure model,we have drawn the following conclusions: (1) The P-wave velocity of the uppermost crust of North China changes dramatically,exhibiting a complicated velocity structure in plane view. It can be divided into three velocity zones mainly trending towards north-west. In the research area,the lowest-velocity zones lie in the Haihe (海河) plain and Bohai (渤海) Bay. Although the geological structure of the sedimentary overburden in the study area is somewhat inherited by the upper crust,there are still several differences between them. (2) Generally,the P-wave velocity of the crust increases with depth in the study area,but there still exists local velocity reversion. In the east,low-velocity anomalies of the Haihe plain gradually disappear with increasing depth,and the Shanxi (山西) graben in the west is mainly characterized by relatively low velocity anomalies. Bounded by the Taihang (太行) Mountains,the eastern and western parts differ in structural trend of stratum above the crystalline basement. The structural trend of the Huanghuaihai (黄淮海) block in the east is mainly north-east,while that of the Shanxi block and the eastern edge of the Ordos block is mainly north-west. (3) According to the morphological features of Moho,the crust of the study area can be divided into six blocks. In the Shanxi block,Moho apppears like a nearly south-north trending depression belt with a large crustal thickness. In the southern edge of the Inner Mongolia block and the south of the Yanshan (燕山) block,the Moho exhibits a feature of fold belt,trending nearly towards east-west. In the eastern edge of the Ordos block,the structure of Moho is relatively complex,presenting a pattern of fold trending nearly towards north-west with alternating convexes and concaves. Beneath the Huanghuaihai block,the middle and northern parts of the North China rift zone,the Moho is the shallowest in the entire region,with alternating uplifts and depressions in its shape. For the anteclise zone in the west of Shandong (山东) Province,the Moho is discontinuous for the fault depression extending in the north-west direction along Zaozhuang (枣庄) -Qufu (曲阜).  相似文献   

10.
Phase and group velocities of 15–70 s Rayleigh waves propagating across the Iberian Peninsula have been transformed into local dispersion curves by linear inversion of travel times. The procedure permits that the waveform dispersion to be obtained as a continuous period-dependent velocity function at grid points belonging to the area probed by the waves, thus providing phase- and group-velocity contour maps for several periods within the interval of interest. The regionalization process rests on a homogeneous initial data set in which the number of observations remains almost constant for all periods of reference. Damped least-squares inversion of the local dispersion curves for shear-wave velocity structure is performed to obtain depth-dependent S-wave velocity profiles at the grid points covering the model region. The reliability of the results should improve significantly owing to the use of phase and group velocities simultaneously. On this basis, we have built horizontal depth sections that give an updated view of the seismic velocity structure of the peninsula at lithospheric and upper mantle depths (20–200 km). After averaging all the pure-path S-wave velocities previously determined at each grid point, the velocity-depth models so obtained for major tectonic units allow the comparison between the Hercynian basement and other areas of Mesozoic folding and Tertiary basins.  相似文献   

11.
华北东部地区地壳泊松比异常及其成因   总被引：4，自引：0，他引：4       下载免费PDF全文
利用地震层析成像方法可以提供地壳上地幔P波和S波速度扰动精细图像,进一步换算还可以得到泊松比的图像.但是,与P波和S波速度扰动图像相比,泊松比成像是否具有独特优点还有待研究.通过对华北东部进行了高分辨率地震层析成像研究,作出了该地区地壳速度结构和泊松比的图像,揭示了该区域存在一个高泊松比异常区,位于恒山-北太行-张家口...  相似文献   

12.
Based upon the deep seismic sounding profiles carried out in the Tengchong Volcano-Geothermal Area (TVGA), western Yunnan Province of China, a 2-D crustal P velocity structure is obtained by use of finite-difference inversion and forward travel-time fitting method. The crustal model shows that a low-velocity anomaly zone exists in the upper crust, which is related to geothermal activity. Two faults, the Longling–Ruili Fault and Tengchong Fault, on the profile extend from surface to the lower crust and the Tengchong Fault likely penetrates the Moho. Moreover, based on teleseismic receiver functions on a temporary seismic network, S-wave velocity structures beneath the geothermal field show low S-wave velocity in the upper crust. From results of geophysical survey, the crust of TVGA is characterized by low P-wave and S-wave velocities, low resistivity, high heat-flow value and low Q. The upper mantle P-wave velocity is also low. This suggests presence of magma in the crust derived from the upper mantle. The low-velocity anomaly in upper crust may be related to the magma differentiation. The Tengchong volcanic area is located on the northeast edge of the Indian–Eurasian plate collision zone, away from the eastern boundary of the Indian plate by about 450 km. Based on the results of this paper and related studies, the Tengchong volcanoes can be classified as plate boundary volcanoes.  相似文献   

13.
Crustal heterogeneity and seismotectonics of the region around Beijing, China   总被引：18，自引：0，他引：18  
Jinli Huang  Dapeng Zhao   《Tectonophysics》2004,385(1-4):159-180
A detailed three-dimensional (3-D) P-wave velocity model of the crust and uppermost mantle under the Chinese capital (Beijing) region is determined with a spatial resolution of 25 km in the horizontal direction and 4–17 km in depth. We used 48,750 precise P-wave arrival times from 2973 events of local crustal earthquakes, controlled seismic explosions and quarry blasts. These events were recorded by a new digital seismic network consisting of 101 seismic stations equipped with high-sensitivity seismometers. The data are analyzed by using a 3-D seismic tomography method. Our tomographic model provides new insights into the geological structure and tectonics of the region, such as the lithological variations and large fault zones across the major geological terranes like the North China Basin, the Taihangshan and the Yanshan mountainous areas. The velocity images of the upper crust reflect well the surface geological and topographic features. In the North China Basin, the depression and uplift areas are imaged as slow and fast velocities, respectively. The Taihangshan and Yanshan mountainous regions are generally imaged as broad high-velocity zones, while the Quaternary intermountain basins show up as small low-velocity anomalies. Velocity changes are visible across some of the large fault zones. Large crustal earthquakes, such as the 1976 Tangshan earthquake (M=7.8) and the 1679 Sanhe earthquake (M=8.0), generally occurred in high-velocity areas in the upper to middle crust. In the lower crust to the uppermost mantle under the source zones of the large earthquakes, however, low-velocity and high-conductivity anomalies exist, which are considered to be associated with fluids. The fluids in the lower crust may cause the weakening of the seismogenic layer in the upper and middle crust and thus contribute to the initiation of the large crustal earthquakes.  相似文献   

14.
A nearly 500-km-long seismic profile with reflective and refractive wide-angle Ocean Bottom Seismometer (OBS) data and Multi-Channel Seismic (MCS) data was acquired across the northeastern continental margin of the South China Sea (SCS). The S-wave crustal structure and Vp/Vs ratios have been obtained based on a previously published P-wave model using the software RayInvr. Modeling of vertical- and horizontal-component OBS data yields information on the seismic crustal velocities, lithology, and geophysical properties along the OBS-2001 seismic profile. S-wave velocities in the model increase generally with depth but exhibit high spatial variability, particularly from the shelf to the upper slope of the northeastern SCS margin. Vp/Vs ratios also reveal significant lithological heterogeneity. Dongsha–Penghu Uplift (DPU) is a tectonic zone with a thicker crust than adjacent areas and a high magnetic anomaly. With a Vp/Vs of 1.74 and a P-wave velocity of 5.0–5.5 km/s, the DPU primarily consists of felsic volcanic rocks in the upper crust and is similar to the petrology of Zhejiang–Fujian volcanic provinces, which perhaps is associated with a Mesozoic volcanic arc. The ocean–continent transition (OCT) in the northeastern SCS is characterized by a thinning continental crust, volcanoes in the upper crust, and a high velocity layer (HVL) in the lower crust. The S-wave velocity and Vp/Vs ratio suggest that the HVL has a mafic composition that may originate from underplating of the igneous rocks beneath the passive rifted crust after the cessation of seafloor spreading.  相似文献   

15.
The 1000-km-long Darlag–Lanzhou–Jingbian seismic refraction profile is located in the NE margin of the Tibetan plateau. This profile crosses the northern Songpan-Ganzi terrane, the Qinling-Qilian fold system, the Haiyuan arcuate tectonic region, and the stable Ordos basin. The P-wave and S-wave velocity structure and Poisson's ratios reveal many significant characteristics in the profile. The crustal thickness increases from northeast to southwest. The average crustal thickness observed increases from 42 km in the Ordos basin to 63 km in the Songpan-Ganzi terrane. The crust becomes obviously thicker south of the Haiyuan fault and beneath the West-Qinlin Shan. The crustal velocities have significant variations along the profile. The average P-wave velocities for the crystalline crust vary between 6.3 and 6.4 km/s. Beneath the Songpan-Ganzi terrane, West-Qinling Shan, and Haiyuan arcuate tectonic region P-wave velocities of 6.3 km/s are 0.15 km/s lower than the worldwide average of 6.45 km/s. North of the Kunlun fault, with exclusion of the Haiyuan arcuate tectonic region, the average P-wave velocity is 6.4 km/s and only 0.5 km/s lower than the worldwide average. A combination of the P-wave velocity and Poisson's ratio suggests that the crust is dominantly felsic in composition with an intermediate composition at the base. A mafic lower crust is absent in the NE margin of the Tibetan plateau from the Songpan-Ganzi terrane to the Ordos basin. There are low velocity zones in the West-Qinling Shan and the Haiyuan arcuate tectonic region. The low velocity zones have low S-wave velocities and high Poisson's ratios, so it is possible these zones are due to partial melting. The crust is divided into two layers, the upper and the lower crust, with crustal thickening mainly in the lower crust as the NE Tibetan plateau is approached. The results in the study show that the thickness of the lower crust increases from 22 to 38 km as the crustal thickness increases from 42 km in the Ordos basin to 63 km in the Songpan-Ganzi terrane south of the Kunlun fault. Both the Conrad discontinuity and Moho in the West-Qinling Shan and in the Haiyuan arcuate tectonic region are laminated interfaces, implying intense tectonic activity. The arcuate faults and large earthquakes in the Haiyuan arcuate tectonic region are the result of interaction between the Tibetan plateau and the Sino–Korean and Gobi Ala Shan platforms.  相似文献   

16.
One in-line wide-angle seismic profile was conducted in 1990 in the course of the Southeastern China Continental Dynamics project aimed at the study of the contact between the Cathaysia block and the Yangtze block. This 380-km-long profile extended in NW–SE direction from Tunxi, Anhui Province, to Wenzhou, Zhejiang Province. Five in-line shots were fired and recorded at seismic stations with spacing of about 3 km along the recording line. We have used two-dimensional ray tracing to model P- and S-wave arrivals and provide constraints on the velocity structure of the upper crust, middle crust, lower crust, Moho discontinuity, and the top part of the lithospheric mantle. P-wave velocity, S-wave velocity and VP/VS ratio are mapped. The crust is 36-km thick on average, albeit it gradually thins from the northwest end to the southeast end (offshore) of the profile. The average crustal velocity is 6.26 km/s for P-waves but 3.6 km/s for S-waves. A relatively narrow low-velocity layer of about 4 km of thickness, with P- and S-wave velocities of 6.2 km/s and 3.5 km/s, respectively, marks the bottom of the middle crust at a depth of 23-km northwest and 17-km southeast. At the crust–mantle transition, the P- and S-wave velocity change quickly from 7.4 to 7.8 km/s (northwest) and 8.0 to 8.2 km/s (southeast) and from 3.9 to 4.2 km/s (northwest) and 3.9 to 4.5 km/s (southeast), respectively. This result implies a lateral contrast in the upper mantle velocity along the 140 km sampled by the profile approximately. The average VP/VS ratio ranges from 1.68–1.8 for the upper crust to 1.75 for the middle and 1.75–1.85 for lower crust. With the interpretation of the wide-angle seismic data, Jiangshan–Shaoxin fault is considered as the boundary between the Yangtze and the Cathaysia block.  相似文献   

17.
Regional surface wave tomography in the sub-Antarctic Scotia Sea is helpful in revealing the nature of the crust and the S-wave seismic velocity profile beneath the Bransfield Strait. The joint use of our regional network, global seismographic network stations and local temporary arrays provide better lateral resolution than that obtained in our previous studies concerning the Scotia Sea region.Tomographic analysis of data obtained using 10 broad band seismic stations and more than 300 regional events, shows that the Bransfield Basin is characterised by a strong group velocity reduction of 8% with respect to the surrounding areas, in the period range from 15 s to 50 s.The crustal and upper mantle models of the eastern, central and western Bransfield Basin are obtained by joint inversion of Rayleigh and Love local dispersion curves from 15 s to 50 s. In addition our data set is expanded to a broader period interval (1–80 s), in central Bransfield Strait in order to better constrain the upper mantle and shallow crust.The main results can be summarized as follows: (a) the crust thins distinctly from W toward E; the variation is consistent with the type of volcanism, earthquake distribution and bathymetric observations, (b) low upper mantle velocities (soft lid) extend down to depths exceeding 70 km as a consequence of elevated temperatures, (c) the crust beneath the central Bransfield Basin displays continental characteristics with a gradually increasing S-wave velocity distribution versus depth analogous to the East African Rift structure of Kenya, (d) negative velocity gradients are present in the lower crust beneath the eastern Bransfield Basin; these could be interpreted as magmatic bodies originating from decompression melting of the mantle.  相似文献   

18.
1.IntroductionTheManzhouli-SuifenheGeoscienceTransect(M-SGT)isinthenortheastChina,acrosstheprovincesofInnerMongoliaandHeilongiiang.Geologically,itissitllatedamongtheplatesofNorthChina,SiberiaandWesternPacific.ThewholeIengthoftheM-SGTisaboutl3Ookm,whichcrossesmanytectonicunits(Fig.l).ItisclearthatitstectonicsitUationisuniqueanditsgeologicstructUreiscomplex.Deepearthquakeshappenfrequentlya1ongthetransect.Therefore,itisarepresentativeprofileofnortheastChinaandtheNortheastAsia.TheM-S…  相似文献   

19.
利用地震台阵观测资料研究大庆地区深部构造   总被引：1，自引：0，他引：1  
利用绥芬河-满洲里地学断面上布设的流动地震台阵,并结合固定地震台记录到的2009年6月-2011年5月间的远震资料,通过有限频方法开展体波走时层析成像研究,获取研究区上地幔三维P波速度结构;采用瑞利面波双台相速度和背景噪声相速度层析成像方法,反演研究区的三维S波速度结构。应用两种方法最终得到大庆地区三维速度分布特征。结果显示：松辽盆地地壳厚度较薄,盆地周边的大、小兴安岭隆起区厚度变厚,松辽盆地地壳内部多存在低速异常,壳幔及上地幔与周边相比呈现高速异常,分析上地幔物质上升会造成局部高速异常结构。速度结构异常多是南北向或北北东向,可能与区域性断裂对上、中地壳影响有关。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号