共查询到20条相似文献,搜索用时 171 毫秒
1.
KK型管节点是自升式平台桁架式桩腿中的一种管节点,其应力集中系数是影响桩腿疲劳寿命的重要参数。应力集中系数与管节点的几何形式密切相关,为分析KK型管节点应力集中系数对几何参数的敏感性,利用ANSYS软件对某KK型管节点进行几何参数化建模,利用有限元数值模拟方法对各工况下的热点应力进行分析,并分别计算各相应工况下的名义应力,然后将热点应力与名义应力相比得到不同几何参数下的热点应力集中系数。对计算结果进行整理分析,得到了KK型管节点应力集中系数对无量纲几何参数的敏感性规律。结果表明,应力集中系数与撑杆受力状态、管节点结构形式有关,在满足结构布置、建造工艺和其他安全性指标的前提下,分析结果能够为KK型管节点的结构设计和疲劳分析提供技术支撑。 相似文献
2.
The procedure of assessment of structural fatigue strength of an offshore floating production and storage and offloading unit(FPSO) in this paper. The emphasis is placed on the long-term prediction of wave induced loading, the refined finite element model for hot spot stress calculation, the combination of stress components, and fatigue damage assessment based on S-N curve. 相似文献
3.
4.
In engineering practice,tubular X-joints have been widely used in offshore structures.The fatigue failure of tubular X-joints in offshore engineering is mainly caused by axial tensile stress.In this study,the stress concentration factor distribution along the weld toe in the hot spot stress region for tubular X-joints subject to axial loads have been analyzed by use of finite element method.Through numerical analysis,it has been found that the peak stress concentration factor is located at the saddle position.Thereafter,80 models have been analyzed,and the effect of the geometric parameters of a tubular X-joint on the stress concentration factor has been investigated.Based on the experimental values of the numerical stress concentration factor,a parametric equation to calculate the stress concentration factor of tubular X-joints has been proposed.The accuracy of this equation has been verified against the requirement of the Fatigue Guidance Review Panel,and the proposed equation is found capable of producing reasonably accurate stress concentration factor values for tubular X-joints subject to axial loads. 相似文献
5.
6.
以某新型深水半潜式钻井平台为分析对象,依据三维绕射理论计算单位波幅下波浪诱导载荷,通过建立三维有限元模型计算完成了热点应力响应。运用热点应力的谱分析法计算得到危险节点的疲劳寿命,并进一步分析了各个短期海况和不同浪向对节点总的疲劳损伤度的贡献。研究结果表明,危险节点的疲劳寿命都满足设计寿命要求;在各种中低海况下,疲劳损伤主要来自于平均跨零周期在6 s附近,有义波高转大的短期海况;平台关键连接部位的疲劳损伤主要是在横浪和斜浪状态下产生的,并且对某单一方向的波浪非常敏感。此研究对该类型平台的连接处结构设计和疲劳分析方法有参考意义。 相似文献
7.
基于Voronoi图与空间自相关的西北太平洋柔鱼资源空间聚集特征分析 总被引:3,自引:1,他引:2
以西北太平洋柔鱼Ommastrephes bartramii为例,基于2007—2010年中国鱿钓船的生产统计原始点位数据,利用Voronoi图和空间自相关方法,评估柔鱼资源的全局空间模式、局部空间聚集特征,并以空间可视化方式呈现。在渔业资源及空间分析中,高产值聚集的海域称为空间热点,而低产值聚集的海域称为空间冷点。研究表明,全局自相关统计量Morans I和General G均指示了西北太平洋柔鱼资源的聚集分布状态。局部空间自相关显示,2007和2009年均具有2个热点和1个冷点区域,2008年具有1个热点和1个冷点区域,2010年具有1个热点和2个冷点区域,这些热冷点呈南北向或东西向分布态势。热冷点格局的叠加图显示,研究区内存在1个强热点、1个弱热点和1个强冷点,其中弱热点覆盖的区域在4年间表现为热点和冷点的交互变动。对7—11月平均海表温度和叶绿素a浓度的分析显示,热点和冷点均为中心渔场,热冷点形成的温度条件无显著差异;热冷点形成的叶绿素a浓度范围为0.2~1.1mg/m3,其中冷点区域的浓度相对较高。 相似文献
8.
9.
The fatigue assessment plays an increasing role for the offshore structural safety. Many fatigue assessment methods have been developed for this purpose. Among those methods, the time domain method is regarded as the most accurate method but less adopted in practice due to time consuming. In order to improve the efficiency of the time domain method, an innovative block partition and equivalence method of the wave scatter diagram is developed for offshore structural fatigue assessment. After the wave scatter diagram is partitioned into several blocks, the newly developed method, involves determination of the equivalent wave height, wave period and occurrence probability of the representative sea states based on modified energy equivalent principle. The equivalent wave period of the representative sea state is calculated via the spectral moment formula in which the equivalent spectral moments of zero and second order are obtained based on the weighted averaging principle. Combining with the determined wave period, the equivalent significant wave height can be determined by reversing the wave spectrum integral formula, where the equivalent wave energy of a divided block of the wave scatter diagram is modified by introducing a factor to compensate the effect of low- and high-amplitude cycles fatigue damage. The equivalent occurrence probability is equal to the summation of the original sea states’ occurrence probability within the divided block. The developed method has the advantage of preserving the stochastic characteristics of the short term sea states within the divided block during determining the representative sea state. At the same time the newly developed method has no limitation on block partition and can be applied on different offshore structure. Two structural models, a fixed mono-pile platform and a floating semi-submersible platform, are demonstrated in the numerical examples. Results indicate that the newly developed method is robust, computationally affordable, and accurate within engineering expectations. 相似文献
10.
疲劳破坏是海洋结构物发生破坏的一种主要形式,深水半潜平台在海上运输、作业、停滞时会受到交变的风、浪、流载荷作用,进而引起结构关键节点处的疲劳损伤,影响平台安全性。以"海洋石油981"半潜钻井平台为研究对象,利用光纤光栅应变传感器对结构高应力区进行应力监测,获取测点处应力时历数据。将监测位置划分为四个监测板块,采用四点雨流计数法对测点应力进行处理,得到以离散形式给出的应力循环幅度与相应循环周次。参照DNV《海上钢结构疲劳设计规范》推荐的S-N曲线,基于Miner线性疲劳累计损伤原则,得到各个测点处的总体疲劳损伤度。选取具有最大疲劳损伤度的危险测点,并结合海上实测总时长,预测半潜平台的总体疲劳寿命。 相似文献
11.
A method for stochastic fatigue analysis of offshore platforms is presented. The method accounts for the nonlinearity in the drag loading term, and for the systematic deviation from a Gaussian process for a platform response. The method is based on an assumed form of the stress response process at a hot spot. A number of full scale measurements for elements in fixed platforms and for marine risers show very good agreement with this assumed form. A conventional spectral fatigue approach with stochastic linearization of the drag term in the basis for the new method, which uses results from linearizations in two or more sea states. The method is easily implemented in standard computer programs presently used within the offshore oil industry for fatigue analysis. 相似文献
12.
浮式生产储油卸油船(FPSO)经历满载和卸载,油船试验和多变的波浪载荷.此时结构中较高的初始残余应力常常已被释放,很大程度上影响了此类结构疲劳强度估算准确性.应用三维弹塑性有限元方法模拟FPSO典型焊接接头的残余应力释放,并用试验数据进行验证.对结构在变幅循环载荷下的残余应力释放进行研究,得到相关的残余应力释放预报公式.从而为提高FPSO在实际载况下疲劳强度估算准确性提供有价值参考. 相似文献
13.
Chen Tieyun Zhang Huiyuan Professor Shanghai Jiao Tong University Shanghai
Doctor of Engineering Shenzhen Shipbuilding Trading Co. LTD. 《中国海洋工程》1993,(1)
- Stress concentration analysis of multiplanar tubular DT joints plays an important role in the fatigue design of offshore platforms. A semi-analytic method for stress analysis under the condition of any loads is briefly introduced in the paper. Nineteen multiplanar tubular DT joints with one of two braces of the same dimension subjected to axial loads and out- of- plane bending moments are computed for parametric stress analysis by using the present method. The influence of geometrical parameters on the stresses of multiplanar tubular DT joints is discussed and compared with corresponding uniplanar T joints. The regression formulae for the stress at hot spot of multiplanar DT joints are found by modification of SCF of corresponding uniplanar T joints. The parametric formulae for the maximum stress by superposition. Finally, the influences of stiffening effect and load-interaction effect on the maximum stress of DT joints are discussed. 相似文献
14.
Ching-Chuan Huang 《Marine Georesources & Geotechnology》2017,35(8):1099-1110
Waterfront structures such as seawalls, dikes, and levees are frequently subjected to scouring at the toe of the slope, leading to deteriorated performance and increased failure potential. To this end, some model reinforced steep-faced slopes consisting of a two-dimensional backfill were brought to failure to explore the failure mechanisms of some geosynthetic-reinforced slopes subjected to simulated toe scouring. Results of model tests indicate that in the case of shallow scouring, a reinforcement length (L) increase from 0.4 to 1.0 Ht (Ht, total height of reinforced walls) significantly increases the tolerance against toe scouring-induced failures. In this case, a local bearing capacity failure of facing is the dominant failure mode. In the case of deep scouring, an increase in L beyond 0.7 Ht provides no additional tolerance against toe scouring because the ultimate state is always associated with a global circular sliding in the unreinforced zone. Experimental values of the lateral pressure coefficient (Kt) converted from the measured reinforcement forces indicate that reinforcement forces consistently increase in response to toe scouring up to the final collapsing state and that the reinforcement forces for L?=?1.0 Ht mobilize more effectively than those for L?=?0.7 Ht. 相似文献
15.
Economy and ice-resistance are two factors that must be considered in the design of offshore oil platforms in the Bohai Gulf. This paper focuses on the optimal design of ice-resistant offshore jacket platforms in the Bohai Gulf in consideration of fatigue life of tubular joints, with the minimum initial weight and satisfying dynamic properties. An efficient fatigue analysis procedure based on spectral analysis is proposed, in which a hybrid finite element model is adopted to simulate the jacket platform and the tubular joints, and the pseudo-excitation method is used to calculate the power spectral density of the hot spot stress. Finally, a practical jacket platform with an ice-breaking cone in the Bohai Gulf is optimized, and the results demonstrate that the fatigue life of tubular joints could be improved and the weight of jackets decreased simultaneously. 相似文献
16.
振动时效技术是一种有效消除焊接残余应力、提升构件使用寿命、保证结构尺寸精度的方法。在自升式平台固桩架建造过程中,焊接施工导致其内部产生大量的残余应力,残余应力是导致固桩架精度超差和损伤失效的重要原因之一,它会大幅度降低平台的疲劳寿命,因此,固桩架建造完成后消除其内部残余应力对于平台的使用安全至关重要。本文以一个质量约100 t的固桩架分段为研究对象,采用专门的振动时效设备对固桩架施加激振力,测量振动时效前后主焊缝附近的残余应力水平。通过对比分析发现,振动时效技术可以有效降低固桩架焊接过程中产生的残余应力,达到调整、均化、降低残余应力水平、提高构件尺寸精度稳定性的效果,有利于提升平台的使用寿命。 相似文献
17.
18.
19.
An important aspect of deepwater well integrity assurance is conductor fatigue analysis under environmental loads acting on the riser system during drilling operation. Fatigue damage arises from stress changes in a structure due to cyclic loading. In practice, the lateral cyclic soil response is typically modelled using Winkler p–y springs. An appropriate soil model for conductor–soil interaction analysis is the one based on which the absolute magnitudes of stresses and their changes can accurately be predicted for well integrity evaluation. The API recommendations for p–y curves, which are often used for conductor–soil interaction analysis, have originally been developed for piled foundation and are inappropriate for well fatigue analysis. To that end, an extensive study involving four series of centrifuge model tests and FE numerical analyses was conducted to fundamentally study conductor–soil interaction under a wide spectrum of loading conditions. The tests simulated conductor installations in normally to over consolidated clays, and medium-dense clean sands. Soil models were developed specifically for conductor fatigue analysis for each of the soil types. The test results and soil models are presented in two papers. The first paper, Part I, presents an overview of the study and first series tests in normally to lightly over-consolidated kaolin clay and discusses the observations made with regards to monotonic and cyclic soil resistances and their relationship to conductor fatigue modelling. The second paper, Part II, presents centrifuge test results in normally to lightly over-consolidated Golf of Mexico (GoM) clay, over-consolidated natural clay and medium-dense clean sands along with the respective soil models developed for conductor fatigue damage prediction. Overall, the accuracy of fatigue life predictions using these novel soil models is very high – generally within about a few percentage of the measured values. 相似文献
20.
Reliability Analysis of Ice-Induced Fatigue and Damage in Offshore Engineering Structures 总被引:8,自引:1,他引:7
《中国海洋工程》2000,14(1)
—In Bohai Gulf,offshore and other installations have collapsed by sea ice due to the fatigueand fracture of the main supporting components in the ice environments.In this paper presented are someresults on fatigue reliability of these structures in the Gulf by investigating the distributions of iceparameters such as its floating direction and speed,sheet thickness,compressive strength,ice forces on thestructures,and hot spot stress in the structure.The low temperature,ice breaking modes and componentfatigue failure modes are also taken into account in the analysis of the fatigue reliability of the offshorestructures experiencing both random ice loading and low temperatures.The results could be applied to thedesign and operation of offshore platforms in the Bohai Gulf. 相似文献