共查询到20条相似文献，搜索用时 62 毫秒
1.
We numerically studied the full (six degrees of freedom) motion of a cargo ship without roll stabilizers in rough (sea state 5) conditions for multiple heading angles ranging from 0° (follower seas) to 180° (head seas). We found that the ship exhibits excessive roll motion in quartering (45° off the stern), beam, and head seas. Therefore, roll damping is critical in these conditions. We then investigated the performance of passive and active anti-roll tank (ART) systems and compared their performance in each of the three sea conditions. Each ART consists of three identical tanks, distributed along the centerline of the ship, each of which consists of two vertical ducts connected at the bottom with a horizontal duct. A pump is located at the middle of the horizontal duct of each tank. The pumps are switched on for active ARTs but switched off for passive ones. The loads (forces and moments) exerted on the ship by the ARTs are added to the hydrodynamic loads (e.g., due to pressure and viscous effects) and the thrust in the governing equations of motion of the ship. Whereas both passive and active ARTs are able to reduce the excessive roll motion, active ARTs outperform the passive ones from three perspectives. First, they are more effective in reducing the roll motion. Second, they require much less working liquid. Third, their performance is insensitive to their natural frequencies and, hence, to their geometric design. In addition, we found that head seas are most responsive to ARTs, which suggests that they are effective in mitigating parametric roll. 相似文献
2.
The present paper describes an investigation on the relevance of parametric resonance for a typical fishing vessel in head seas. Results for different Froude numbers are discussed based on experimental, numerical and analytical studies.The first region of resonance is investigated. Distinct wave amplitudes are considered. Some intense resonances are found to occur. The paper compares the experimental results with non-linear time simulations of the roll motion. Very good agreement is found, even when large motions take place.Finally, in order to analyze the experimental/numerical results, analytic consideration is given to distinct parameters affecting the dynamic process of roll amplification. The influence of heave, pitch, wave passage effect, speed and roll restoring characteristics are discussed. 相似文献
3.
The best way of reducing roll motion is by increasing roll damping. Bilge keels are the most common devices for increasing roll damping. If more control is required, anti-roll tanks and fins are used. Tanks have the advantage of being able to function when the ship is not underway. Our objective is to develop design procedures for passive tanks for roll reduction in rough seas. This paper focuses on the design of passive U-tube tanks. The tank-liquid equation of motion is integrated simultaneously with the six-degree-of-freedom (6DOF) equations of the ship motion. The coupled set of equations is solved by using the Large Amplitude Motion Program ‘LAMP’, which is a three-dimensional time-domain simulation of the motion of ships in waves. The unstabilized and stabilized roll motions of a S60-70 ship with forward speed and beam waves have been analyzed. For high-amplitude waves, the unstabilized roll angle exhibits typical nonlinear phenomena: a shift in the resonance frequency, multi-valued responses, and jumps. The performance of a S60-70 ship with a passive tank is investigated in various sea states with different encounter wave directions. It is found that passive anti-roll tanks tuned in the linear or nonlinear ranges are very effective in reducing the roll motion in the nonlinear range. The effect of the tank damping, frequency, and mass on the tank performance is studied. Also, it is found that passive anti-roll tanks are very effective in reducing the roll motion for ships having a pitch frequency that is nearly twice the roll frequency in sea states 5 and 6. 相似文献
4.
In this paper, the modelling of strong parametric resonance in head seas is investigated. Non-linear equations of ship motions in waves describing the couplings between heave, roll and pitch are contemplated. A third-order mathematical model is introduced, aimed at describing strong parametric excitation associated with cyclic changes of the ship restoring characteristics. A derivative model is employed to describe the coupled restoring actions up to third order. Non-linear coupling coefficients are analytically derived in terms of hull form characteristics.The main theoretical aspects of the new model are discussed. Numerical simulations obtained from the derived third-order non-linear mathematical model are compared to experimental results, corresponding to excessive motions of the model of a transom stern fishing vessel in head seas. It is shown that this enhanced model gives very realistic results and a much better comparison with the experiments than a second-order model. 相似文献
5.
Since the most severe roll motion occurs at resonance (known as synchronous rolling), the best way of reducing it is to increase the damping. The most common means of doing so is by the installation of bilge keels. If more control is required, both anti-roll tanks and fins are used. Tanks have the advantage of being able to function when the ship is not underway. The use of tanks with liquid free surfaces for reducing roll motion of ships is an old idea. Many researchers have studied the design of anti-roll tanks. However, most of the past effort has concentrated on studying the performance of anti-roll tanks in damping the roll motion of the ship. Little attention has been paid to the fluid motion inside the tank itself. Another important issue is the tank tuning. Proper tuning of the anti-roll tank, to match the ship's natural frequency, is very important in reducing the roll motion. This paper concentrates on the most familiar type, which is the U-tube passive tank as a mechanical absorber of roll motion. A detailed study, covering tank damping, mass, location relative to the ship CG, and tuning, is presented. New suggestions and observations are stated concerning tank damping and tuning. 相似文献
6.
This work deals with parametric resonance which poses a great danger especially for container ships sailing in following or head seas. Important parameters that are effective in roll resonance are pointed out. For this purpose, a containership is taken as an example to analyze its stability in longitudinal waves based on the method worked out by American Bureau of Shipping (ABS). Unfavorable sailing conditions such as heading and speed, which directly depend on the environmental conditions, have been determined for this particular ship. These conditions may be reported to the master to guide him to keep his ship out of parametric resonance zones. Numerical details of the procedure have been worked out and provided as well. 相似文献
7.
This study investigates the coupling effects of six degrees of freedom in ship motion with fluid oscillation inside a three-dimensional rectangular container using a novel time domain simulation scheme. During the time marching, the tank-sloshing algorithm is coupled with the vessel-motion algorithm so that the influence of tank sloshing on vessel motions and vice versa can be assessed. Several factors influencing the dynamic behavior of tank–liquid system due to moving ship are also investigated. These factors include container parameters, environmental settings such as the significant wave height, current velocity as well as the direction of wind, wave and flow current acting on the ship. The nonlinear sloshing is studied using a finite element model whereas nonlinear ship motion is simulated using a hybrid marine control system. Computed roll response is compared with the existing results, showing fair agreement. Although the two hull forms and the sea states are not identical, the numerical result shows the same trend of the roll motion when the anti-rolling tanks are considered. Thus, the numerical approach presented in this paper is expected to be very useful and realistic in evaluating the coupling effects of nonlinear sloshing and 6-DOF ship motion. 相似文献
8.
Bottom ventilated cavitation has been proven as a very effective drag reduction technology for river ships and planning boats. The ability of this technology to withstand the sea wave impact usual for seagoing ships depends on the ship bottom shape and could be enhanced by some active flow control devices. Therefore, there is the need in numerical tools to estimate the effects of bottom changes and to design such devices. The fundamentals of active flow control for the ship bottom ventilated cavitation are considered here on the basis of a special model of cavitating flows. This model takes into account the air compressibility in the cavity, as well as the multi-frequency nature of the incoming flow in wavy seas and of the cavity response on perturbations by incoming flow. The numerical method corresponding to this model was developed and widely manifested with an example of a ship model tested in a towing tank at Froude numbers between 0.4 and 0.7.The impact of waves in head seas and following seas on cavities has been studied in the range of wavelengths from 0.45 to 1.2 of the model (or ship) length. An oscillating cavitator-spoiler was considered as the flow controlling devices in this study. The oscillation magnitude and the phase shift between cavitator oscillation and the incoming waves have been varied to determine the best flow control parameters. The main results of the provided computational analysis include oscillations of cavity surface, of the pressure in cavity and of the moment of hydrodynamic load on the cavitator. The major part of computations has been carried out for the flap oscillating at the frequency coinciding with the wave frequency, but the effect of a frequency shift is also analyzed. 相似文献
9.
Active control of ship roll motion with proportional and derivative controller, linear quadratic regulator, generalized predictive control (GPC), and deadbeat predictive control, is studied by using a U-tube water tank. For the predictive control, system identification is applied to update the parameters of linear ship roll model with U-tube tank when the ship dynamics changes. Numerical simulations show that GPC has the best performance and the U-tube tank is effective in ship roll mitigation. 相似文献
10.
The world container fleet shows the fastest growth of any ship type. The infrastructure for loading and unloading container ships are also growing in many ports around the world. Such a trend is due to the fact that the containerized transportation is becoming more and more attractive due to many factors. The increasing demand in container transportation is met by use of more number of container ships including Post-Panamax and Malacca-max containers. Loss of containers in seas and accidents of container vessels are reported from many parts of seas. New generation containers are severely hit by parametric rolling. Pure loss of stability, due to exponential increase of roll in either broaching—to or head sea conditions, is called parametric rolling, is subjected to rigorous investigation by many researchers. Algebraic expression based on well known Duffing's method is proposed for solutions in parametric rolling. The variation in GM and damping values from trough to crest conditions associated with bow flare immersion and emergence in head sea conditions with pitch resonance with the heading waves are said to be the prime reason for parametric rolling. A simple model to predict the beginning of parametric rolling is described in this paper. 相似文献
11.
Prediction of ship motions at high Froude number is carried out using a time domain strip theory in which the unsteady hydrodynamic problem is treated in terms of the motion of fixed strips of the water as hull sections pass through it. The Green function solution is described and the integration of the ship motion carried out by an averaging method to ensure stability of the solution. The method is validated by comparison with tank data for conventional slender hulls suitable for catamarans, small water area twin hull (SWATH) forms and hulls suitable for high-speed monohulls. Motion computations are then carried out for 14 designs with an operating speed of 40 kts and a displacement of 1000 tonnes. The vessels are assumed not to be fitted with motion control systems for the purposes of this comparative study. Motion sickness incidence is predicted to rise to between 42 and 72% depending upon the hull design in 3 m head seas of average period 7.5 s. MSI values reduce in smaller seas with a shorter average period to be less than 15% in all cases in 1m seas with an average period of 5.5 s. 相似文献
12.
Head-wave parametric rolling of a surface combatant 总被引：1，自引：0，他引：1
Hamid Sadat-Hosseini Angelo Olivieri Hirotada Hashimoto Gabriele Bulian 《Ocean Engineering》2010,37(10):859-878
Complementary CFD, towing tank EFD, and nonlinear dynamics approach study of parametric roll for the ONR Tumblehome surface combatant both with and without bilge keels is presented. The investigations without bilge keels include a wide range of conditions. CFD closely agrees with EFD for resistance, sinkage, and trim except for Fr>0.5 which may be due to free surface and/or turbulence modeling. CFD shows fairly close agreement with EFD for forward-speed roll decay in calm water, although damping is over/under predicted for largest/smaller GM. Most importantly CFD shows remarkably close agreement with EFD for forward-speed parametric roll in head waves for GM=0.038 and 0.033 m, although CFD predicts larger instability zones at high and low Fr, respectively. The CFD and EFD results are analyzed with consideration ship motion theory and compared with Mathieu equation and nonlinear dynamics approaches. Nonlinear dynamics approaches are in qualitative agreement with CFD and EFD. The CFD and nonlinear dynamics approach results were blind in that the actual EFD radius of gyration kxx was not known a priori. 相似文献
13.
The purpose of this paper is to analyze the nonlinear ship roll motion equation and the main parameters that induce ship capsizing in beam seas, estimate the survival probability of a ferry in random seas and to find out a risk assessment method for the ship’s intact stability. A single degree of freedom (1-DOF) dynamic system of ship rolling in beam seas is investigated and the nonlinear differential equation is solved in the time domain by the fourth order Runge-Kutta algorithm. The survival probability of a ferry in beam seas is investigated using the theory of “safe basin”. The survival probability is calculated by estimating erosion of “safe basin” during ship rolling motion by Monte Carlo simulations. From the results it can be concluded that the survival probability of a ship in beam sea condition can be predicted by combining Monte Carlo simulations and the theory of “safe basin”. 相似文献
14.
Influence of non-linearities on the limits of stability of ships rolling in head seas 总被引：3，自引：0，他引：3
The present paper describes an investigation on parametric resonance in head seas in which a new third-order coupled mathematical model is considered. The restored modes of heave, roll and pitch are contemplated. The discussion is illustrated for the case of a transom stern fishing vessel at different speeds. It is pointed out that numerical simulations employing the new model are successfully compared to experimental results previously obtained for the vessel.Considering that analyticity is an important tool when handling complex stability issues, some theoretical dynamic characteristics of the equations are discussed. By means of the analysis of the coupled linear variational equation derived from an extended third-order model, the appearance of super-harmonics and increased rigidity proportional to wave amplitude squared due to third-order terms is demonstrated.In the present paper, an important tool is explored, that is the analysis of the limits of stability obtained from the new model. Limits of stability are a well-known and practical way of looking into the problem of parametric resonance. New limits of stability are derived and compared to the more conventional Strut diagram. Dynamic characteristics associated with the new limits of stability are discussed. The influence of different parameters is investigated, including vessel speed, damping and tuning. Consistent and revealing results are obtained through the analysis of the new limits of stability for different speeds and damping. 相似文献
15.
Parametric roll of a containership in head sea condition has been studied in the paper. A time domain routine for GZ righting arm calculation based on exact underwater hull geometry has been implemented into a two-degree-of-freedom procedure for roll response calculation. The speed variation due to e.g. added resistance has been accounted for in the model by the surge velocity. The ship roll motion due to a regular wave critical for parametric roll occurrence has been simulated, as well as the ship roll response in a severe stochastic sea. The present method has been compared with other existing methods for parametric roll prediction. 相似文献
16.
This paper has shown a numerical motion simulation method which can be employed to study on parametric rolling of ships in a seaway. The method takes account of the main nonlinear terms in the rolling equation which stabilize parametric rolling, including the nonlinear shape of the righting arm curve, nonlinear damping and cross coupling among all 6 degrees of freedom. For the heave, pitch, sway and yaw motions, the method uses response amplitude operators determined by means of the strip method, whereas the roll and surge motions of the ship are simulated, using nonlinear motion equations coupled with the other 4 degrees of freedom. For computing righting arms in seaways, Grim's effective wave concept is used. Using these transfer functions of effective wave together with the heave and pitch transfer functions, the mean ship immersion, its trim and the effective regular wave height are computed for every time step during the simulation. The righting arm is interpolated from tables, computed before starting the simulation, depending on these three quantities and the heel angle. The nonlinear damping moment and the effect of bilge keels are also taken into account. The numerical simulation tool has shown to be able to model the basic mechanism of parametric rolling motions. Some main characteristics of parametric rolling of ships in a seaway can be good reproduced by means of the method. Comprehensive parametric analyses on parametric rolling amplitude in regular waves have been carried out, with that the complicated parametric rolling phenomena can be understood better. 相似文献
17.
Michio Ueno 《Ocean Engineering》2010,37(10):879-890
A submersible surface ship (SSS) is based on a novel concept that the SSS goes on surface like conventional ships in moderate seas but goes underwater in rough seas to the depth sufficient to avoid wave effects. The SSS has a wing system that produces downward lift to go underwater with preserving the residual buoyancy for its safety. The SSS is expected to be able to keep both safety and punctuality even if it encounters unexpected bad weather.The motion of the SSS is studied. The equations of motion are formulated and the procedures for estimating hydrodynamic derivatives are presented. The hydrodynamic derivatives are estimated for a SSS having a configuration, a hull with a pair of main wings and a pair of horizontal tail wings. Using these estimated hydrodynamic derivatives, calculation of the SSS motion is carried out.The calculation results show some specific aspects of the SSS especially for effects of the elevator of main wings and horizontal tail wings, aileron of main wings, rudder and propeller revolution. It is confirmed that the existence of static roll restoring moment and having large hull comparing with wing area play important roles in the motion of the SSS. 相似文献
19.
首先介绍全球海域圆筒形装置的工程应用案例,对比圆筒形FPSO相对常规船形的优势,然后以原油储量、工艺模块甲板面积、耐波性、稳性、系泊系统、排水量等控制参数为目标,研究圆筒形FPSO主尺度选取依据,分舱原则。重点研究圆筒形装置的阻尼板结构,此为抑制运动响应的关键结构,通过模型试验方法分析对比了水平阻尼板、不同角度锥形阻尼板的特性。最后研究圆筒形装置运动性能分析方法,介绍二阶响应数值预报方法,研究垂荡和横摇运动的耦合效应,分析波频和低频运动响应,通过模型试验进行了验证,从而指导圆筒形装置设计。 相似文献
20.
The prediction of ship stability during the early stages of design is very important from the point of vessel’s safety. Out of the six motions of a ship, the critical motion leading to capsize of a vessel is the rolling motion. In the present study, particular attention is paid to the performance of a ship in beam sea. The linear ship response in waves is evaluated using strip theory. Critical condition in the rolling motion of a ship is when it is subjected to synchronous beam waves. In this paper, a nonlinear approach has been tried to predict the roll response of a vessel. Various representations of damping and restoring terms found in the literature are investigated. A parametric investigation is undertaken to identify the effect of a number of key parameters like wave amplitude, wave frequency, metacentric height, etc. 相似文献