首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 296 毫秒
1.
Abstract— Five amorphous (extensively melted) grains from Stardust aerogel capture Track 35 were examined by transmission electron microscopy (TEM); two from the bulb, two from near the bulb‐stylus transition, and one from near the terminal particle. Melted grains consist largely of a texturally and compositionally heterogeneous emulsion of immiscible metal/sulfide beads nanometers to tens of nanometers in diameter in a silica‐rich vesicular glass. Most metal/sulfide beads are spherical, but textures of non‐spherical beads indicate that some solidified as large drops during stretching and breaking while in translational and rotational motion, and others solidified from lenses of immiscible liquid at the silicate‐melt/vesicle (vapor) interface. Melted grains appear to become richer in Fe relative to Mg, and depleted in S relative to Fe and Ni with increasing penetration distance along the aerogel capture track. Fe/S ratios are near unity in grains from the bulb of Track 35, consistent with the dominance of Fe‐monosulfide minerals inferred by previous research on Stardust materials. Near‐stoichiometric Fe/S in melted grains from the bulb suggests that Fe‐sulfides in the bulb were dispersed and melted during formation of the bulb but did not lose S. Along‐track increases in Fe/S in melted grains from the bulb through the bulb‐stylus transition and continuing into the stylus indicate that S initially present as iron monosulfide may have been progressively partially volatilized and lost from the melted grains with greater penetration of the grains deeper into the aerogel during capture‐melting of comet dust. Extensively melted grains from the bulbs of aerogel capture tracks may preserve better primary compositional information with less capture‐related modification than grains from farther along the same capture tracks.  相似文献   

2.
The bulbous Stardust track #80 (C2092,3,80,0,0) is a huge cavity. Allocations C2092,2,80,46,1 nearest the entry hole and C2092,2,80,47,6 about 0.8 mm beneath the entry hole provide evidence of highly chaotic conditions during capture. They are dominated by nonvesicular low‐Mg silica glass instead of highly vesicular glass found deeper into this track which is consistent with the escape of magnesiosilica vapors generated from the smallest comet grains. The survival of delicate (Mg,Al,Ca)‐bearing silica glass structures is unique to the entry hole. Both allocations show a dearth of surviving comet dust except for a small enstatite, a low‐Ca hypersthene grain, and a Ti‐oxide fragment. Finding scattered TiO2 fragments in the silica glass could support, but not prove, TiO2 grain fragmentation during hypervelocity capture. The here reported dearth in mineral species is in marked contrast to the wealth of surviving silicate and oxide minerals deeper into the bulb. Both allocations show Fe‐Ni‐S nanograins dispersed throughout the low‐Mg silica glass matrix. It is noted that neither comet Halley nor Wild 2 had a CI bulk composition for the smallest grains. Using the analogs of interplanetary dust particles (IDPs) and cluster IDPs it is argued that a CI chondritic composition requires the mixing of nonchondritic components in the appropriate proportions. So far, the fine‐grained Wild 2 dust is biased toward nonchondritic ferromagnesiosilica materials and lacking contributions of nonchondritic components with Mg‐Fe‐Ni‐S[Si‐O] compositions. To be specific, “Where are the GEMS”? The GEMS look‐alike found in this study suggests that evidence of GEMS in comet Wild 2 may still be found in the Stardust glass.  相似文献   

3.
Abstract— Three‐dimensional structures and elemental abundances of four impact tracks in silica aerogel keystones of Stardust samples from comet 81P/Wild 2 (bulbous track 67 and carrot‐type tracks 46, 47, and 68) were examined non‐destructively by synchrotron radiation‐based microtomography and X‐ray fluorescence analysis. Track features, such as lengths, volumes and width as a function of track depth, were obtained quantitatively by tomography. A bulbous portion was present near the track entrance even in carrot‐type tracks. Each impact of a cometary dust particle results in the particle disaggregated into small pieces that were widely distributed on the track walls as well as at its terminal. Fe, S, Ca, Ni, and eight minor elements are concentrated in the bulbous portion of track 68 as well as in terminal grains. It was confirmed that bulbous portions and thin tracks were formed by disaggregation of very fine fragile materials and relatively coarse crystalline particles, respectively. The almost constant ratio of whole Fe mass to track volume indicates that the track volume is almost proportional to the impact kinetic energy. The size of the original impactor was estimated from the absolute Fe mass by assuming its Fe content (CI) and bulk density. Relations between the track sizes normalized by the impactor size and impact conditions are roughly consistent with those of previous hypervelocity impact experiments.  相似文献   

4.
Abstract— Many of the nanometer‐scale grains from comet 81P/Wild 2 did not survive hypervelocity capture. Instead, they melted and interacted with silica melt derived from the aerogel used by the Stardust mission. Their petrological properties were completely modified, but their bulk chemistry was preserved in the chemical signatures of mostly vesicular Si‐rich glass with its typical Fe‐Ni‐S compound inclusions. Chondritic aggregate IDP L2011A9 that experienced atmospheric pre‐entry thermal modification was selected as an analog to investigate these Wild 2 chemical signatures. The chemical, petrologic, and mineralogical properties of the individual constituents in this aggregate IDP are presented and used to match the chemical signatures of these Wild 2 grains. Mixing of comet material and pure silica, which is used in a diagram that recognizes this mixing behavior, is used to constrain the probable petrologic and minerals that caused the Wild 2 signatures. The Wild 2 nanometer‐scale grain signatures in Si‐rich glass allocations from three different deceleration tracks resembled mixtures of ultrafine‐grained principal components and dense agglomerate‐like material, Mg‐rich silicates (<500 nm) and Fe,Ni‐sulfides (<100 nm), and Si‐rich amorphous material. Dust resembling the mixed matrix of common chondritic aggregate IDPs was present in Jupiter‐family comet Wild 2.  相似文献   

5.
Abstract— Flight aerogel in Stardust allocation C2092,2,80,47,6 contains percent level concentrations of Na, Mg, Al, S, Cl, K, Ca, Cr, Mn, Fe, and Ni that have a distinctive Fe‐ and CI‐normalized distribution pattern, which is similar to this pattern for ppb level chemical impurities in pristine aerogel. The elements in this aerogel background were assimilated in non‐vesicular and vesicular glass with the numerous nanometer Fe‐Ni‐S compound inclusions. After correction for the background values, the chemical data show that this piece of comet Wild 2 dust was probably an aggregate of small (<500 nm) amorphous ferromagnesiosilica grains with many tiny Fe,Ni‐sulfide inclusions plus small Ca‐poor pyroxene grains. This distinctive Fe‐ and CI‐normalized element distribution pattern is found in several Stardust allocations. It appears to be a common feature in glasses of quenched aerogel melts but its exact nature is yet to be established.  相似文献   

6.
Abstract— Four particles extracted from track 80 at different penetration depths have been studied by analytical transmission electron microscopy (ATEM). Regardless of their positions within the track, the samples present a comparable microstructure made of a silica rich glassy matrix embedding a large number of small Fe‐Ni‐S inclusions and vesicles. This microstructure is typical of strongly thermally modified particles that were heated and melted during the hypervelocity impact into the aerogel. X‐ray intensity maps show that the particles were made of Mg‐rich silicates (typically 200 nm in diameter) cemented by a fine‐grained matrix enriched in iron sulfide. Bulk compositions of the four particles suggest that the captured dust particle was an aggregate of grains with various iron sulfide fraction and that no extending chemical mixing in the bulb occurred during the deceleration. The bulk S/Fe ratios of the four samples are close to CI and far from the chondritic meteorites from the asteroidal belt, suggesting that the studied particles are compatible with chondritic‐porous interplanetary dust particles or with material coming from a large heliocentric distance for escaping the S depletion.  相似文献   

7.
Abstract– The deceleration tracks in the Stardust aerogel display a wide range of morphologies, which reveal a large diversity of incoming particles from comet 81P/Wild 2. If the large and dense mineral grains survived the extreme conditions of hypervelocity capture, this was not the case for the fine‐grained material that is found strongly damaged within the aerogel. Due to their low mechanical strength, these assemblages were disaggregated, dispersed, and flash melted in the aerogel in walls of bulbous deceleration tracks. Their petrologic and mineralogical properties are found significantly modified by the flash heating of the capture. Originating from a quenched melt mixture of comet material and aerogel, the representative microstructure consists of silica‐rich glassy clumps containing Fe‐Ni‐S inclusions, vesicles and “dust‐rich” patches, the latter being remnants of individual silicate components of the impacting aggregate. The average composition of these melted particle fragments is close to the chondritic CI composition. They might originate from ultrafine‐grained primitive components comparable to those found in chondritic porous IDPs. Capture effects in aerogel and associated sample biases are discussed in terms of size, chemical and mineralogical properties of the grains. These properties are essential for the grain survival in the extremely hot environment of hypervelocity impact capture in aerogel, and thus for inferring the correct properties of Wild 2 material.  相似文献   

8.
Comet 81P/Wild 2 dust, the first comet sample of known provenance, was widely expected to resemble anhydrous chondritic porous (CP) interplanetary dust particles (IDPs). GEMS, distinctly characteristic of CP IDPs, have yet to be unambiguously identified in the Stardust mission samples despite claims of likely candidates. One such candidate is Stardust impact track 57 “Febo” in aerogel, which contains fine‐grained objects texturally and compositionally similar to GEMS. Their position adjacent the terminal particle suggests that they may be indigenous, fine‐grained, cometary material, like that in CP IDPs, shielded by the terminal particle from damage during deceleration from hypervelocity. Dark‐field imaging and multidetector energy‐dispersive X‐ray mapping were used to compare GEMS‐like‐objects in the Febo terminal particle with GEMS in an anhydrous, chondritic IDP. GEMS in the IDP are within 3× CI (solar) abundances for major and minor elements. In the Febo GEMS‐like objects, Mg and Ca are systematically and strongly depleted relative to CI; S and Fe are somewhat enriched; and Au, a known aerogel contaminant, is present, consistent with ablation, melting, abrasion, and mixing of the SiOx aerogel with crystalline Fe‐sulfide and minor enstatite, high‐Ni sulfide, and augite identified by elemental mapping in the terminal particle. Thus, GEMS‐like objects in “caches” of fine‐grained debris abutting terminal particles are most likely deceleration debris packed in place during particle transit through the aerogel.  相似文献   

9.
Abstract– We have experimentally produced nanophase sulfide compounds and magnetite embedded in Si‐rich amorphous materials by flash‐cooling of a gas stream. Similar assemblages are ubiquitous, and often dominant components of samples of impact‐processed silica aerogel tiles and submicron grains from comet 81P/Wild 2 were retrieved by NASA’s Stardust mission. Although the texture and compositions of nanosulfide compounds have been reproduced experimentally, the mechanisms of formation of these minerals and their relationship with the surrounding amorphous materials have not been established. In this study, we present evidence that both of these materials may not only be produced through cooling of a superheated liquid but they may have also been formed simultaneously by flash‐cooling and subsequent deposition of a gas dominated by Fe‐S‐SiO‐O2. In a dust generator at the Goddard Space Flight Center, samples are produced by direct gas‐phase condensation from gaseous precursors followed by deposition, which effectively isolates the effects of gas‐phase reactions from the effects of melting and condensation. High‐resolution transmission electron microscopy images and energy‐dispersive spectroscopy analysis show that these experiments replicate key features of materials from type B and type C Stardust tracks, including textures, distribution of inclusions, nanophase size, and compositional diversity. We argue that gas‐phase reactions may have played a significant role in the capture environment for nanophase materials. Our results are consistent with a potential progenitor assemblage of micron and submicron‐sized sulfides and submicron silica‐bearing phases, which are commonly observed in chondritic interplanetary dust particles and in the matrices of the most pristine chondritic meteorites.  相似文献   

10.
Abstract– We have used synchrotron Fe‐XANES, XRS, microRaman, and SEM‐TEM analyses of Stardust track 41 slice and track 121 terminal area slices to identify Fe oxide (magnetite‐hematite and amorphous oxide), Fe‐Ti oxide, and V‐rich chromite (Fe‐Cr‐V‐Ti‐Mn oxide) grains ranging in size from 200 nm to ～10 μm. They co‐exist with relict FeNi metal. Both Fe‐XANES and microRaman analyses suggest that the FeNi metal and magnetite (Fe2O3FeO) also contain some hematite (Fe2O3). The FeNi has been partially oxidized (probably during capture), but on the basis of our experimental work with a light‐gas gun and microRaman analyses, we believe that some of the magnetite‐hematite mixtures may have originated on Wild 2. The terminal samples from track 121 also contain traces of sulfide and Mg‐rich silicate minerals. Our results show an unequilibrated mixture of reduced and oxidized Fe‐bearing minerals in the Wild 2 samples in an analogous way to mineral assemblages seen in carbonaceous chondrites and interplanetary dust particles. The samples contain some evidence for terrestrial contamination, for example, occasional Zn‐bearing grains and amorphous Fe oxide in track 121 for which evidence of a cometary origin is lacking.  相似文献   

11.
Allocation FC6,0,10,0,26 from Stardust track 10 shows a slightly wavy silica glass/compressed silica aerogel interface exposing a patchwork of compressed silica aerogel domains and domains of silica glass with embedded Wild 2 materials in ultra‐thin TEM sections. This interface is where molten silica encountered compressed silica aerogel at temperatures <100 °C, and probably near room temperature, causing steep thermal gradients. An Mg, Fe‐olivine grain, and a plagioclase‐leucite intergrowth survived without melting in silica glass. A Mg‐, Al‐, Ca‐, K‐bearing silica globule moved independently as a single object. Two clusters of pure iron, low‐Ni iron, and low‐Ni, low‐sulfur Fe‐Ni‐S grains also survived intact and came to rest right at the interface between silica glass/compressed silica aerogel. There are numerous Fe‐Ni‐S nanograins scattered throughout MgO‐rich magnesiosilica glass, but compositionally similar Fe‐Ni‐S are also found in the compressed silica aerogel, where they are not supposed to be. This work could not establish how deep they had penetrated the aerogel. Iron nanograins in this allocation form core‐ring grains with a gap between the iron core and a surrounding ring of thermally modified aerogel. This structure was caused when rapid, thermal expansion of the core heated the surrounding compressed aerogel that upon rapid cooling remained fixed in place while the iron core shrank back to its original size. The well‐known volume expansion of pure iron allowed reconstruction of the quench temperature for individual core‐ring grains. These temperatures showed the small scale of thermal energy loss at the silica glass/compressed silica aerogel interface. The data support fragmentation of olivine, plagioclase, and iron and Fe ± low‐Ni grains from comet 81P/Wild 2 during hypervelocity capture.  相似文献   

12.
The silica glass extracted from the bulbous parts of Stardust tracks is riddled by electron‐opaque nanograins with compositions that are mostly between pyrrhotite and metallic iron with many fewer nanograins having a Fe‐Ni‐S composition. Pure taenite nanograins are extremely rare, but exist among the terminal particles. Assuming that these Fe‐Ni‐S compositions are due to mixing of pyrrhotite and taenite melt droplets, it is remarkable that the taenite melt grains had discrete Fe/Ni ratios. This paper presents the data from an igneous pyrrhotite/taenite fragment of cluster IDP L2011#21, wherein the taenite compositions have the same discrete Fe/Ni clusters as those inferred for the Stardust nanograins. These Fe/Ni clusters are a subsolidus feature with compositions that are constrained by the Fe‐Ni phase diagram. They formed during cooling of the parent body of this cluster IDP fragment. These specific Fe/Ni ratios, 12.5, 24, 40, and 53 atom% Ni, were preserved in asteroidal taenite that survived radially outward transport to the Kuiper Belt where it accreted into the (future) comet Wild 2 nucleus.  相似文献   

13.
NASA’s Stardust spacecraft collected dust from the coma of Comet 81P/Wild 2 by impact into aerogel capture cells or into Al-foils. The first direct, laboratory measurement of the physical, chemical, and mineralogical properties of cometary dust grains ranging from <10−15 to ∼10−4 g were made on this dust. Deposition of material along the entry tracks in aerogel and the presence of compound craters in the Al-foils both indicate that many of the Wild 2 particles in the size range sampled by Stardust are weakly bound aggregates of a diverse range of minerals. Mineralogical characterization of fragments extracted from tracks indicates that most tracks were dominated by olivine, low-Ca pyroxene, or Fe-sulfides, although one track was dominated by refractory minerals similar to Ca–Al inclusions in primitive meteorites. Minor mineral phases, including Cu–Fe-sulfide, Fe–Zn-sulfide, carbonate and metal oxides, were found along some tracks. The high degree of variability of the element/Fe ratios for S, Ca, Ti, Cr, Mn, Ni, Cu, Zn, and Ga among the 23 tracks from aerogel capture cells analyzed during Stardust Preliminary Examination is consistent with the mineralogical variability. This indicates Wild 2 particles have widely varying compositions at the largest size analyzed (>10 μm). Because Stardust collected particles from several jets, sampling material from different regions of the interior of Wild 2, these particles are expected to be representative of the non-volatile component of the comet over the size range sampled. Thus, the stream of particles associated with Comet Wild 2 contains individual grains of diverse elemental and mineralogical compositions, some rich in Fe and S, some in Mg, and others in Ca and Al. The mean refractory element abundance pattern in the Wild 2 particles that were examined is consistent with the CI meteorite pattern for Mg, Si, Cr, Fe, and Ni to 35%, and for Ca, Ti and Mn to 60%, but S/Si and Fe/Si both show a statistically significant depletion from the CI values and the moderately volatile elements Cu, Zn, Ga are enriched relative to CI. This elemental abundance pattern is similar to that in anhydrous, porous interplanetary dust particles (IDPs), suggesting that, if Wild 2 dust preserves the original composition of the Solar Nebula, the anhydrous, porous IDPs, not the CI meteorites, may best reflect the Solar Nebula abundances. This might be tested by elemental composition measurements on cometary meteors.  相似文献   

14.
Abstract— Aerogel collectors have been used to capture cometary, interplanetary, and interstellar dust grains by NASA's Stardust mission, highlighting their importance as a scientific instrument. Due to the fragile and heterogeneous nature of cometary dust grains, their fragments are found along the walls of tracks that are formed during the capture process. These fragments appear to experience a wide range of thermal alteration and the causes of this variation are not well understood at a theoretical level as physical models of track formation are not well developed. Here, a general model of track formation that allows for the existence of partially and completely vaporized aerogel material in tracks is developed. It is shown that under certain conditions, this general track model reduces to the kinetic “snowplow” model that has previously been proposed. It is also shown, based on energetic considerations, that track formation is dominated by an expansion that is snowplow‐like in the later stages of track formation. The equation of motion for this snowplow‐like stage can be solved analytically, thus placing constraints on the amount of heating experienced by cometary dust fragments embedded in track walls. It is found that the heating of these fragments, for a given impact velocity, is expected to be greater for those embedded in larger tracks. Given the expected future use of aerogels for sample return missions, the results presented here imply that the choice of aerogel compositions can have a significant effect on the modification of samples captured and retrieved by these collectors.  相似文献   

15.
Abstract– Low‐iron, manganese‐enriched (LIME) olivine grains are found in cometary samples returned by the Stardust mission from comet 81P/Wild 2. Similar grains are found in primitive meteoritic clasts and unequilibrated meteorite matrix. LIME olivine is thermodynamically stable in a vapor of solar composition at high temperature at total pressures of a millibar to a microbar, but enrichment of solar composition vapor in a dust of chondritic composition causes the FeO/MnO ratio of olivine to increase. The compositions of LIME olivines in primitive materials indicate oxygen fugacities close to those of a very reducing vapor of solar composition. The compositional zoning of LIME olivines in amoeboid olivine aggregates is consistent with equilibration with nebular vapor in the stability field of olivine, without re‐equilibration at lower temperatures. A similar history is likely for LIME olivines found in comet samples and in interplanetary dust particles. LIME olivine is not likely to persist in nebular conditions in which silicate liquids are stable.  相似文献   

16.
Abstract– Carbonaceous matter in Stardust samples returned from comet 81P/Wild 2 is observed to contain a wide variety of organic functional chemistry. However, some of this chemical variety may be due to contamination or alteration during particle capture in aerogel. We investigated six carbonaceous Stardust samples that had been previously analyzed and six new samples from Stardust Track 80 using correlated transmission electron microscopy (TEM), X‐ray absorption near‐edge structure spectroscopy (XANES), and secondary ion mass spectroscopy (SIMS). TEM revealed that samples from Track 35 containing abundant aliphatic XANES signatures were predominantly composed of cometary organic matter infilling densified silica aerogel. Aliphatic organic matter from Track 16 was also observed to be soluble in the epoxy embedding medium. The nitrogen‐rich samples in this study (from Track 22 and Track 80) both contained metal oxide nanoparticles, and are likely contaminants. Only two types of cometary organic matter appear to be relatively unaltered during particle capture. These are (1) polyaromatic carbonyl‐containing organic matter, similar to that observed in insoluble organic matter (IOM) from primitive meteorites, interplanetary dust particles (IDPs), and in other carbonaceous Stardust samples, and (2) highly aromatic refractory organic matter, which primarily constitutes nanoglobule‐like features. Anomalous isotopic compositions in some of these samples also confirm their cometary heritage. There also appears to be a significant labile aliphatic component of Wild 2 organic matter, but this material could not be clearly distinguished from carbonaceous contaminants known to be present in the Stardust aerogel collector.  相似文献   

17.
Unlocking the 3‐D structure and properties of intact chondritic porous interplanetary dust particles (IDPs) in nanoscale detail is challenging, which is also complicated by atmospheric entry heating, but is important for advancing our understanding of the formation and origins of IDPs and planetary bodies as well as dust and ice agglomeration in the outer protoplanetary disk. Here, we show that indigenous pores, pristine grains, and thermal alteration products throughout intact particles can be noninvasively visualized and distinguished morphologically and microstructurally in 3‐D detail down to ~10 nm by exploiting phase contrast X‐ray nanotomography. We have uncovered the surprisingly intricate, submicron, and nanoscale pore structures of a ~10‐μm‐long porous IDP, consisting of two types of voids that are interconnected in 3‐D space. One is morphologically primitive and mostly submicron‐sized intergranular voids that are ubiquitous; the other is morphologically advanced and well‐defined intragranular nanoholes that run through the approximate centers of ~0.3 μm or lower submicron hollow grains. The distinct hollow grains exhibit complex 3‐D morphologies but in 2‐D projections resemble typical organic hollow globules observed by transmission electron microscopy. The particle, with its outer region characterized by rough vesicular structures due to thermal alteration, has turned out to be an inherently fragile and intricately submicron‐ and nanoporous aggregate of the sub‐μm grains or grain clumps that are delicately bound together frequently with little grain‐to‐grain contact in 3‐D space.  相似文献   

18.
Abstract— The known encounter velocity (6.1 kms?1) and particle incidence angle (perpendicular) between the Stardust spacecraft and the dust emanating from the nucleus of comet Wild‐2 fall within a range that allows simulation in laboratory light‐gas gun (LGG) experiments designed to validate analytical methods for the interpretation of dust impacts on the aluminum foil components of the Stardust collector. Buckshot of a wide size, shape, and density range of mineral, glass, polymer, and metal grains, have been fired to impact perpendicularly on samples of Stardust Al 1100 foil, tightly wrapped onto aluminum alloy plate as an analogue of foil on the spacecraft collector. We have not yet been able to produce laboratory impacts by projectiles with weak and porous aggregate structure, as may occur in some cometary dust grains. In this report we present information on crater gross morphology and its dependence on particle size and density, the pre‐existing major‐ and trace‐element composition of the foil, geometrical issues for energy dispersive X‐ray analysis of the impact residues in scanning electron microscopes, and the modification of dust chemical composition during creation of impact craters as revealed by analytical transmission electron microscopy. Together, these observations help to underpin the interpretation of size, density, and composition for particles impacted on the Stardust aluminum foils.  相似文献   

19.
Abstract— We report analyses of aerogel tracks using (1) synchrotron X‐ray computed microtomography (XRCMT), (2) laser confocal scanning microscopy (LCSM), and (3) synchrotron radiation X‐ray fluorescence (SRXRF) of particles and their paths resulting from simulated hypervelocity impacts (1–2), and a single ～1 mm aerogel track from the Stardust cometary sample collector (1–3). Large aerogel pieces can be imaged sequentially, resulting in high spatial resolution images spanning many tomographic fields of view (‘lambda‐tomography’). We report calculations of energy deposited, and tests on aromatic hydrocarbons showing no alteration in tomography experiments. Imaging at resolutions from ～17 to ～1 micron/pixel edge (XRCMT) and to <100 nm/pixel edge (LCSM) illustrates track geometry and interaction of particles with aerogel, including rifling, particle fragmentation, and final particle location. We present a 3‐D deconvolution method using an estimated point‐spread function for aerogel, allowing basic corrections of LCSM data for axial distortion. LCSM allows rapid, comprehensive, non‐destructive, high information return analysis of tracks in aerogel keystones, prior to destructive grain extraction. SRXRF with LCSM allows spatial correlation of grain size, chemical, and mineralogical data. If optical methods are precluded in future aerogel capture missions, XRCMT is a viable 3D imaging technique. Combinations of these methods allow for complete, nondestructive, quantitative 3‐D analysis of captured materials at high spatial resolution. This data is fundamental to understanding the hypervelocity particle‐aerogel interaction histories of Stardust grains.  相似文献   

20.
Abstract– The Stardust mission captured comet Wild 2 particles in aerogel at 6.1 km s?1. We performed high‐resolution three‐dimensional imaging and X‐ray fluorescence mapping of whole cometary tracks in aerogel. We present the results of a survey of track structures using laser scanning confocal microscopy, including measurements of track volumes, entry hole size, and cross‐sectional profiles. We compare various methods for measuring track parameters. We demonstrate a methodology for discerning hypervelocity particle ablation rates using synchrotron‐based X‐ray fluorescence, combined with mass and volume estimates of original impactors derived from measured track properties. Finally, we present a rough framework for reconstruction of original impactor size, and volume of volatilized material, using our measured parameters. The bulk of this work is in direct support of nondestructive analysis and identification of cometary grains in whole tracks, and its eventual application to the reconstruction of the size, shape, porosity, and chemical composition of whole Stardust impactors.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号