首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 61 毫秒
1.
Vertical electrical soundings technique was used to evaluate the aquifer characteristics and distribution in the northern part of Paiko in Nigeria. A total of thirty vertical electrical soundings were carried out using ABEM SAS4000 Terrameter, and the data was analyzed both manually and with software (Resist software). The result revealed the aquifer resistivity and thickness to vary from 10.9 to 80,368 Ωm, and 1.06 to 72 m, respectively. Also, hydraulic conductivity ranges from 0.010267 to 41.61928 m/day while transmissivity values range from 0.035215 to 70.09302 m2. The hydrogeological maps (hydraulic conductivity and transmissivity image maps) showed the variations of these parameters in the study area and that the southwestern part of the area has prolific aquifer.  相似文献   

2.
The present study indicates that the factors controlling the hydraulic relation between surface water and groundwater at the western lake shoreline change from one locality to another. This depends upon the lithological characteristics and the major structures. In the southern sectors, sedimentation at the bottom and sides of the lake prevents the water movement to the Nubian sandstone aquifer. The potentiometric map reveals that the water level altitudes range between 170 m in the vicinity of the lakeshore line and 110 m west of the lake. The groundwater flow lines show that the main recharge to the aquifer comes from the southwest direction, as well as from the lake inland to variable distances (about 30 Km). During the present study, Darcy’s law was applied to calculate the recharge from the western shoreline of Lake Nasser to the adjacent Nubian aquifer. The maximum value of seepage was at Garf Hussein (27.71?×?106 m³/year), which may be related to high permeability and hydraulic gradient. Also, it may be related to the N–S strike faults that cut the area on both sides of the Lake, and the groundwater is expected to have free circulation through the faults of this trend. The minimum value was recorded in Adindan section (0.61?×?106 m³/year). This may be related to the limited recharge from the lake to the aquifer, due to the sedimentation that dislocates this recharge.  相似文献   

3.
The integration of geophysical data with direct hydrogeological measurements can provide a minimally invasive approach to characterize the subsurface at a variety of resolutions and over many spatial scales. The field of hydrogeophysics has attracted much attention during the last two decades. In this domain, the geophysical data inverted to geophysical models are interpreted in terms of the hydrogeology to serve as a basis for the definition of hydraulic models in the areas of interest. The hydraulic conductivity (K) value measured in a reference borehole has been combined with the electrical conductivity obtained from nearby geo-electromagnetic sounding data in the Cenomanian (Upper Cretaceous) aquifer, central Sinai, Egypt. The resulting relation was interpreted with Dar Zarrouk parameters to infer the transmissivity variations at other vertical electrical sounding locations, where K values are unknown. Coincident transient electromagnetic data have been adopted to increase accuracy while interpreting the aquifer geoelectrical properties. The results indicate that the transmissivity values in the aquifer of interest vary from 2,446 to 9,694 m2/day, and K varies from 12.9 to 57.0 m/day throughout the studied area.  相似文献   

4.
The hydrogeologic and hydraulic characteristics of a lateritic terrain in West Bengal, India, were investigated. Test drilling was conducted at ten sites and grain-size distribution curves (GSDCs) were prepared for 275 geologic samples. Performance evaluation of eight grain-size-analysis (GSA) methods was carried out to estimate the hydraulic conductivity (K) of subsurface formations. Finally, the GSA results were validated against pumping-test data. The GSDCs indicated that shallow aquifer layers are coarser than the deeper aquifer layers (uniformity coefficient 0.19–11.4). Stratigraphy analysis revealed that both shallow and deep aquifers of varying thickness exist at depths 9–40 and 40–79 m, respectively. The mean K estimates by the GSA methods are 3.62–292.86 m/day for shallow aquifer layers and 0.97–209.93 m/day for the deeper aquifer layers, suggesting significant aquifer heterogeneity. Pumping-test data indicated that the deeper aquifers are leaky confined with transmissivity 122.69–693.79 m2/day, storage coefficient 1.01?×?10?7–2.13?×?10?4 and leakance 2.01?×?10?7–34.56?×?10?2 day?1. Although the K values yielded by the GSA methods are generally larger than those obtained from the pumping tests, the Slichter, Harleman and US Bureau Reclamation (USBR) GSA methods yielded reasonable values at most of the sites (1–3 times higher than K estimates by the pumping-test method). In conclusion, more reliable aquifers exist at deeper depths that can be tapped for dependable water supply. GSA methods such as Slichter, Harleman and USBR can be used for the preliminary assessment of K in lateritic terrains in the absence of reliable field methods.  相似文献   

5.
Transmissivity (T) is a basic hydraulic parameter of an aquifer that is utilized in most groundwater flow equations to understand the flow dynamics and is generally estimated from pumping tests. However, the cost of performing a large number of aquifer tests is expensive and time consuming. The fact that specific capacity (S c) is correlated with hydraulic flow properties of aquifers simplifies parameter estimation mainly because specific capacity values are more abundant in groundwater databases than values of transmissivity and they offer another approach to estimate hydraulic parameters of aquifers. In this study, an empirical relation is derived using 214 pairs of transmissivity and specific capacity values that are obtained from pumping tests conducted on water wells penetrating the complex volcanic aquifers of Upper Awash Basin, central Ethiopia. Linear and logarithmic regression functions have been performed and it is found that the logarithmic relationship predicting transmissivity from specific capacity data has a better correlation (R = 0.97) than the linear relationship (R = 0.79). The two parameters are log-normally distributed, in which the logarithmic relation is also better statistically justified than the linear relation. Geostatistical estimations of the transmissivity were made using different inputs and methods. Measured and supplemented transmissivity data obtained from estimates using the derived empirical relation were krigged and cokrigged, spherical and exponential models were fitted to the experimental variograms. The cross-validation results showed that the best estimation is provided using the kriging procedure, the transmissivity field represented by the measured transmissivity data and the experimental variogram fitted with the exponential model. Based on the geostatistical approach, the transmissivity map of the aquifer is produced, which will be used for groundwater flow modeling of the study area that will follow this analysis.  相似文献   

6.
Geoelectric investigation using vertical electrical sounding (VES) (Schlumberger electrode configuration) was carried out in 14 locations at Ninth Mile area, southeastern Nigeria to determine the variations and interrelationship of some geoelectric and geohydraulic parameters of a sandstone hydrolithofacies. The measured resistivity data were interpreted using manual and computer software packages, which gave the resistivity, depth, and thickness for each layer within the maximum current electrodes separation. The aquifer resistivity values range from 86.56 to 4753.0 Ωm with 1669.40 Ωm average value. The values of water resistivity from borehole locations close to the sounding points range from 79.49 to 454 .55 Ωm and averaging about 264.7 Ωm. Porosity values of the sandy aquifer range from 30.19 to 34.20%. Fractional porosity values range from 0.3019 to 0.3292, while the tortuosity values vary between 2.91 and 22.85. The geohydraulic parameters estimated vary across the study area. Formation factor ranges from 0.28 to 15.29, hydraulic conductivity ranges from 1.21 to 66.54 m/day which, however, influences the natural flow of water in the aquifer while tortuosity values range from 2.91 to 23.27. The contour maps clearly show the variation of these parameters in the subsurface and the plots show their relationship and high correlation coefficients with one another. The results of this study have revealed the geological characteristics of the subsurface aquifer, established the influence on the amount of groundwater, and proposed a strategy for the management and exploitation of groundwater resources in the area and other aquiferous formations.  相似文献   

7.
Modeling of tide–aquifer interaction plays a vital role in the management of coastal aquifer systems. A novel and robust methodology is presented in this paper for estimating aquifer parameters of coastal aquifers from tide–aquifer interaction data using tide–aquifer interaction model and genetic algorithm (GA). Two stand-alone computer programs were developed to optimize hydraulic diffusivities of unconfined and confined coastal aquifers at multiple sites using GA technique and tide–aquifer interaction model and considering two approaches (‘lumped tidal component approach’ and ‘multi-tidal component approach’). Five sets of real-world tide–aquifer interaction data at two sites of an unconfined aquifer and one set of tide–aquifer interaction data at three sites of a confined aquifer were used to demonstrate the efficacy of the methodology. The analysis of the GA-based inverse modeling results indicated that the ‘multi-tidal component approach’ yields more accurate and reliable hydraulic diffusivities for the unconfined aquifer (RMSE = 0.0129–0.0521 m, NSE = 0.70–0.97, and d1 = 0.91–0.99) as well as for the confined aquifer (RMSE = 0.0204–0.0545 m, NSE = 0.95–0.97, and d1 = 0.99) compared with the ‘lumped tidal component approach’. A comparative evaluation of data-size revealed that the short-duration datasets of the unconfined aquifer provide more reliable estimate of hydraulic diffusivity than the long-duration datasets. Further, it was found that the spring and neap tidal data yield unreasonable values of hydraulic diffusivity with considerably high values of RMSE and very low values of r 2, NSE, and d1, thereby suggesting that spring and neap tidal data are not suitable for aquifer parameter estimation. Overall, it is concluded that the GA-based tide–aquifer interaction model following ‘multi-tidal component approach’ is the most efficient tool for estimating aquifer parameters of unconfined and confined aquifers from tide–aquifer interaction data. The developed methodology is also applicable to other coastal basins of the world irrespective of hydrogeological settings.  相似文献   

8.
Wadi alluvial aquifers located along coastal areas of the Middle East have been assumed to be suitable sources of feed water for seawater reverse osmosis facilities based on high productivity, connectedness to the sea for recharge, and the occurrence of seawater with chemistry similar to that in the adjacent Red Sea. An investigation of the intersection of Wadi Wasimi with the Red Sea in western Saudi Arabia has revealed that the associated predominantly unconfined alluvial aquifer divides into two sand-and-gravel aquifers at the coast, each with high productivity (transmissivity?=?42,000 m2/day). This aquifer system becomes confined near the coast and contains hypersaline water. The hydrogeology of Wadi Wasimi shows that two of the assumptions are incorrect in that the aquifer is not well connected to the sea because of confinement by very low hydraulic conductivity terrigenous and marine muds and the aquifer contains hypersaline water as a result of a hydraulic connection to a coastal sabkha. A supplemental study shows that the aquifer system contains a diverse microbial community composed of predominantly of Proteobacteria with accompanying high percentages of Gammaproteobacteria, Alphaproteobacteria and Deltaproteobacteria.  相似文献   

9.
The Nubia Sandstone aquifer system is one of the most extensive groundwater systems in North Africa, covering an area of about 2,000,000 km2, including parts of Egypt, Libya, Sudan, and Chad. In the Western Desert of Egypt, the Nubian formation has a thermal gradient of 1.1–5°C 100 m–1 with the exception of the East Oweinat area, located in the southern part of the Western Desert. This is the only part of this huge system where ground-water occurs under unconfmed conditions in an area where the Nubian sandstone crops out and is underlain by shallow basement rocks; in this area groundwater has no thermal characteristics. The aquifer system in the East Oweinat area attains a relatively high hydraulic conductivity. The direction of groundwater flow is generally northeastwards but is distorted at faults and fracture zones. Chemical analyses of groundwater in the area indicate a low salt content and suitability for irrigation purposes. As the estimated recharge to the area is low compared with the foreseen irrigation water requirement, the development of groundwater in the East Oweinat should be based on groundwater mining. Although the evaluation of the groundwater resources in East Oweinat has indicated that groundwater can be extracted at a rate of 4.7×106 m3 d–1, the long-term economics of extraction that can sustain large-scale development projects has to be assessed.  相似文献   

10.
A hydrogeological study was conducted in Potsdam sandstones on the international border between Canada (Quebec) and the USA (New York). Two sandstone formations, arkose and conglomerate (base) and well-cemented quartz arenite (upper), underlie the study area and form the major regional aquifer unit. Glacial till, littoral sand and gravel, and marine silt and clay discontinuously overlie the aquifer. In both sandstone formations, sub-horizontal bedding planes are ubiquitous and display significant hydraulic conductivities that are orders of magnitude more permeable than the intact rock matrix. Aquifer tests demonstrate that the two formations have similar bulk hydrologic properties, with average hydraulic conductivities ranging from 2?×?10?5 to 4?×?10?5 m/s. However, due to their different lithologic and structural characteristics, these two sandstones impose rather different controls on groundwater flow patterns in the study area. Flow is sustained through two types of fracture networks: sub-horizontal, laterally extensive fractures in the basal sandstone, where hydraulic connectivity is very good horizontally but very poor vertically and each of the water-bearing bedding planes can be considered as a separate planar two-dimensional aquifer unit; and the more fractured and vertically jointed system found in the upper sandstone that promotes a more dispersed, three-dimensional movement of groundwater.  相似文献   

11.
In 1967, the US Geological Survey (USGS) published the results of 141 pumping tests carried out throughout the Pakistani Punjab to establish representative hydraulic parameters of its large aquifer. Many authors have since concluded that the USGS had over-estimated the horizontal hydraulic conductivity (k r) by 25–100 %, leaving vertical anisotropy and aquifer depth unresolved. No test wells have ever been drilled below 450 m to reach the base of the aquifer, although petroleum explorations mention depths between 1,500 and 4,500 m. After comparison and re-evaluation of all related papers, this study concludes that the USGS interpretation was correct, that its hydraulic values still stand without change, and that the USGS’s applied distance drawdown interpretation is valid to prevent influence of partial penetration on the results. This study also uniquely resolved vertical anisotropy and aquifer thickness by using early- and late-time drawdowns separately and proper scaling of the coordinates, which has often been omitted. With appropriate scaling, all interpretations match the data. The representative hydraulic aquifer values are: k r?=?65 m/d, vertical anisotropy k r/k z?=?25 and aquifer depth 500–1,500 m. The conclusion is that these values can be used, at least as first estimates, for groundwater studies in the Pakistani Punjab.  相似文献   

12.
Groundwater stored in the deep seated sedimentary aquifers is the most important source of water supply. The lack of sufficient groundwater recharge and the overdependence on groundwater might lead to unavailability of this precious natural resource if proper management practices are not adopted. Finite difference modelling using the MODFLOW program was carried out in the east of Riyadh city to simulate the groundwater level conditions under different abstraction scenarios. The simulated aquifer system combines the Wasia and Biyadh aquifer (composed of sandstone) and Aruma aquifer (limestone) which lies between 24°30'00"- 25°30'00" N and longitudes 47°00'00"- 48°00'00"E. The transmissivity and storage coefficient values of Biyadh aquifer are 7.0x10-3 to 7.0x10-2 m2/day and 3.7x10-4 to 9.4x10-4 respectively. The transmissivity and storage coefficient values of Wasia aquifer ranges from 6.7x10-3 to 8.5x10-2 m2/day and 2x10-4 to 2.3x10-4 respectively. The model calibration involved altering the values of model input parameters to match field conditions within certain acceptable limits to forecast the aquifer response over a period of 35 years (2015-2050). The modelling grid consisted of 20 and 24 columns with the grids spacing of 4 km for the small grids and 6 km for large grids. The results showed that though the Wasia aquifer was productive, it showed a large decline in water levels if water abstraction continued at the present rate. If the existing trends of groundwater withdraw continues; the piezometric heads in Wasia and Biyadh aquifers will decline by the year 2050. A reduction in 25% of the existing groundwater pumping rate in the well field will minimize the rate of groundwater decline in the aquifer to a considerable extent.  相似文献   

13.
Inflow data from 23 tunnels and galleries, 136 km in length and located in the Aar and Gotthard massifs of the Swiss Alps, have been analyzed with the objective (1) to understand the 3-dimensional spatial distribution of groundwater flow in crystalline basement rocks, (2) to assess the dependency of tunnel inflow rate on depth, tectonic overprint, and lithology, and (3) to derive the distribution of fracture transmissivity and effective hydraulic conductivity at the 100-m scale. Brittle tectonic overprint is shown to be the principal parameter regulating inflow rate and dominates over depth and lithology. The highest early time inflow rate is 1,300 l/s and has been reported from a shallow hydropower gallery intersecting a 200-m wide cataclastic fault zone. The derived lognormal transmissivity distribution is based on 1,361 tunnel intervals with a length of 100 m. Such interval transmissivities range between 10?9 and 10?1 m2/s within the first 200–400 m of depth and between 10?9 and 10?4 m2/s in the depth interval of 400–1,500 m below ground surface. Outside brittle fault zones, a trend of decreasing transmissivity/hydraulic conductivity with increasing depth is observed for some schistous and gneissic geological units, whereas no trend is identified for the granitic units.  相似文献   

14.
A buried channel has been located, in the basaltic terrain, near village Shenoli, District Satara, Maharashtra. It is composed of a gritty mass formed of a semi-consolidated material. The resistivity value of the semi-consolidated formation is 6.30 Ohm — m whereas the resistivity values of the vesicular basalts range between 18 and 32 Ohm-m. The specific capacity, unit area specific capacity, specific capacity index, transmissivity and hydraulic conductivity, with respect of the buried channel, are 609.07 LPM/m of drawdown, 12.12 LPM/m3, 95.47 LPM/m2, 353.26 m2/day and 55.37 m/day, respectively whereas the values of these parameters for basalt aquifers range from 67 to 117 LPM/m of drawdown, 0.7 to 4.27 LPM/m3, 14.08 to 31.04 LPM/m2, 33.5 to 73.71 m2/day and 9.44 to 18.32 m/day, respectively. A comparison of the well characteristics and aquifer parameters reveal that the buried channel with semi-consolidated formation has distinctly better groundwater yielding properties.  相似文献   

15.
The present work deals with the groundwater aquifer of the Lower Cretaceous sandstone and its sustainable development in Sinai. The studied aquifer system is the most promising groundwater system in Sinai due to its wide extension, hug storage, and good quality. The objective of this paper aims to elucidate the hydrogeological characteristics of the Lower Cretaceous aquifer. The aquifer system occurs under confined conditions. The top surface of the Lower Cretaceous dips steeply towards the southwest direction with step faults. The average sand percent of the penetrated aquifer attains 54%. The main direction of groundwater flow is generally from southwest and locally is concentric to the center of study area related to the influence of the graben block. The aquifer has a hydraulic gradient generally reaches 0.0011 m/m and attains 0.0028 in central portion of study area. The aquifer parameters (effective porosity, transmissivity, and hydraulic conductivity) increase towards the northeast direction with increasing of the sand percentage. Durov diagram plot revealed that the groundwater has been a final stage evolution represented by a NaCl water type. The groundwater salinity increases towards the central of study area coinciding with groundwater flow. The groundwater salinity of the Lower Cretaceous aquifer is brackish water and varies from 2,510 to 5,256 ppm and unsuitable for drinking and domestic purposes.  相似文献   

16.
  相似文献   

17.
Phu tok Aquifer is the most productive water bearing rock in the Northeastern region of Thailand. Generally, well drilled in this aquifer yields approximately 20–50 m3/hr with some wells yield over 150 m3/hr. This aquifer characterized both unconfined and confined aquifer. Data collected from core sampling and TV bore hole show water bearing fractures in the fine grained massive sandstone intercalated with thin shale layers. These intermittently bedding plane fracture zones were found vertically at 60-65 and 95-110 m below ground surface. Three directions of vertically fractures were also found at 103-104 m in the test well with underlain densely sandstone until 120 m of depth. Wells drilled to 60-70 m fractures at the area where surface elevation between 150 and 170 m above mean sea level were artesian well with rising water about 1-3 m. Natural discharge rate from 2-5 inches of diameter casing is 5-10 m3/hr. Fractures at 90-110 m yield 150 m3/hr through 6 inch casing well with 5-6 m of risen water above the ground. It is found from pumping test of Phu Tok Aquifer that hydraulic conductivity of unconfined aquifer at shallower than 50 m is 0.005-17 m/d. Transmissivity and storage coefficient are 0.05-20 m2/d and 7×10-3-0.725 respectively. The confined aquifer at depth not exceed 90 m has hydraulic conductivity value of 0.2-10 m/d while transmissivity and storage coefficient are 3.19-150 m2/d and 1×10-10-1.6×10-2. Another confined aquifer at 90-120 m of depth have hydraulic conductivity value of 0.08-15 m/d and transmissivity and storage coefficient values of 1.7-178 m2/d and 4×10-7-4.5×10-3 respectively.  相似文献   

18.
The suitability of geologic frameworks for extrapolating hydraulic conductivity (K) to length scales commensurate with hydraulic data is difficult to assess. A novel method is presented for evaluating assumed relations between K and geologic interpretations for regional-scale groundwater modeling. The approach relies on simultaneous interpretation of multiple aquifer tests using alternative geologic frameworks of variable complexity, where each framework is incorporated as prior information that assumes homogeneous K within each model unit. This approach is tested at Pahute Mesa within the Nevada National Security Site (USA), where observed drawdowns from eight aquifer tests in complex, highly faulted volcanic rocks provide the necessary hydraulic constraints. The investigated volume encompasses 40 mi3 (167 km3) where drawdowns traversed major fault structures and were detected more than 2 mi (3.2 km) from pumping wells. Complexity of the five frameworks assessed ranges from an undifferentiated mass of rock with a single unit to 14 distinct geologic units. Results show that only four geologic units can be justified as hydraulically unique for this location. The approach qualitatively evaluates the consistency of hydraulic property estimates within extents of investigation and effects of geologic frameworks on extrapolation. Distributions of transmissivity are similar within the investigated extents irrespective of the geologic framework. In contrast, the extrapolation of hydraulic properties beyond the volume investigated with interfering aquifer tests is strongly affected by the complexity of a given framework. Testing at Pahute Mesa illustrates how this method can be employed to determine the appropriate level of geologic complexity for large-scale groundwater modeling.  相似文献   

19.
The River Gash Basin is filled by the Quaternary alluvial deposits, unconformably overlying the basement rocks. The alluvial deposits are composed mainly of unconsolidated layers of gravel, sand, silt, and clays. The aquifer is unconfined and is laterally bounded by the impermeable Neogene clays. The methods used in this study include the carry out of pumping tests and the analysis of well inventory data in addition to the river discharge rates and other meteorological data. The average annual discharge of the River Gash is estimated to be 1,056?×?106 m3 at El Gera gage station (upstream) and 587?×?106 m3 at Salam-Alikum gage station (downstream). The annual loss mounts up to 40% of the total discharge. The water loss is attributed to infiltration and evapotranspiration. The present study proofs that the hydraulic conductivity ranges from 36 to 105 m/day, whereas the transmissivity ranges from 328 to 1,677 m2/day. The monitoring of groundwater level measurements indicates that the water table rises during the rainy season by 9 m in the upstream and 6 m in the midstream areas. The storage capacity of the upper and middle parts of the River Gash Basin is calculated as 502?×?106 m3. The groundwater input reach 386.11?×?106 m3/year, while the groundwater output is calculated as 365.98?×?106 m3/year. The estimated difference between the input and output water quantities in the upper and middle parts of the River Gash Basin demonstrates a positive groundwater budget by about 20?×?106 m3/year  相似文献   

20.
The Guarani aquifer system (GAS) represents one of the biggest aquifers in the world and is the most relevant groundwater resource in South America. For the first time, by combining field and laboratory measurements, a high-resolution aquifer analog model of fluvial–aeolian sediments of the GAS in São Paulo State (Brazil) is constructed. Three parallel sections of frontal outcrops, 28 m × 5.8 m, and two parallel sections of lateral outcrops, 7 m × 5.8 m, are recorded during open-pit mining of sandy sediments and describe in detail the three-dimensional distribution of the local lithofacies and hydrofacies. Variations of hydraulic conductivity, K, and porosity, n, are resolved on the centimeter scale, and the most permeable units of the fluvial–aeolian facies association are identified. The constructed aquifer analog model shows moderate hydraulic heterogeneity and a mean K value of 1.36 × 10?4 m/s, which is greater than the reported range of K values for the entire GAS in São Paulo State. The results suggest that the examined sedimentary unit constitutes a relevant portion of the GAS in São Paulo State in the context of groundwater extraction and pollution. Moreover, the constructed aquifer analog is considered an ideal basis for future numerical model experiments, aiming at in-depth understanding of the groundwater flow and contaminant transport patterns at this GAS portion or at comparable fluvial–aeolian facies associations.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号