共查询到20条相似文献，搜索用时 15 毫秒
1.
Salt tectonics at passive margins is currently interpreted as a gravity-driven process but according to two different types of models: i) pure spreading only driven by differential sedimentary loading and ii) dominant gliding primarily due to margin tilt (slope instability). A comparative analysis of pure spreading and pure spreading is made using simple mechanics as well as available laboratory experiments and numerical models that consider salt tectonic processes at the whole basin scale. To be effective, pure spreading driven by sedimentary loading requires large differential overburden thicknesses and therefore significant water depths, high sediment density, low frictional angles of the sediments (high fluid pore pressure) and a seaward free boundary of the salt basin (salt not covered by sediments). Dominant gliding does not require any specific condition to be effective apart from the dip on the upper surface of the salt. It can occur for margin tilt angles lower than 1° for basin widths in the range of 200-600 km and initial sedimentary cover thickness up to 1 km, even in the absence of abnormal fluid pressure. In pure spreading, salt resists and sediments drive whereas in dominant gliding both salt and sediments drive. In pure spreading, extension is located inside the prograding sedimentary wedge and contraction at the tip. Both extension and contraction migrate seaward with the sedimentary progradation. Migration of the deformation can create an extensional inversion of previously contractional structures. In pure spreading, extension is located updip and contraction downdip. Extension migrates downdip and contraction updip. Migration of the deformation leads to a contractional inversion of previously extensional structures (e.g. squeezed diapirs). Mechanical analysis and modelling, either analogue or numerical, and comparison with margin-scale examples, such as the south Atlantic margins or northern Gulf of Mexico, indicate that salt tectonics at passive margins is dominated by dominant gliding down the margin dip. On the contrary, salt tectonics driven only by differential sedimentary loading is a process difficult to reconcile with geological evidence. 相似文献
2.
Superposed deformation straddling the continental-oceanic transition in deep-water Angola 总被引：3，自引：0，他引：3
The Angolan margin is the type area for raft tectonics. New seismic data reveal the contractional buffer for this thin-skinned extension. A 200-km-long composite section from the Lower Congo Basin and Kwanza Basin illustrates a complex history of superposed deformation caused by: (1) progradation of the margin; and (2) episodic Tertiary epeirogenic uplift. Late Cretaceous tectonics was driven by a gentle slope created by thermal subsidence; extensional rafting took place updip, contractional thrusting and buckling downdip; some distal folds were possibly unroofed to form massive salt walls. Oligocene deformation was triggered by gentle kinking of the Atlantic Hinge Zone as the shelf and coastal plain rose by 2 or 3 km; relative uplift stripped Paleogene cover off the shelf, provided space for Miocene progradation, and steepened the continental slope, triggering more extension and buckling. In the Neogene, a subsalt half graben was inverted or reactivated, creating keystone faults that may have controlled the Congo Canyon; a thrust duplex of seaward-displaced salt jacked up the former abyssal plain, creating a plateau of salt 3–4 km thick on the present lower slope. The Angola Escarpment may be the toe of the Angola thrust nappe, in which a largely Cretaceous roof of gently buckled strata, was transported seawards above the thickened salt by up to 20 km. 相似文献
3.
The Niger Delta is a classic example of a passive margin delta that has gravitationally deformed above an overpressured shale decollement. The outboard Niger Delta clastic wedge, including the Akata Formation overpressured shale decollement, is differentially thickened across relict oceanic basement steps formed at the Chain and Charcot fracture zones. In this study, five analogue models were applied to investigate the effects of a differentially thickened overpressured shale decollement across relict stepped basement on Niger Delta gravity-driven deformation. Gravity-driven delta deformation was simulated by allowing a lobate, layered sandpack to deform by gravity above a ductile polymer. A first series of experiments had a featureless, horizontal basement whereas a second series had differentially thickened polymer above Niger Delta-like basement steps. Two syn-kinematic sedimentation patterns were also tested. Surface strains were analysed using digital image correlation and key models were reconstructed in 3D. All five model deltas spread radially outward and formed plan view arcuate delta top grabens and arcuate delta toe folds. The arcuate structures were segmented by dip-oriented radial grabens and delta toe oblique extensional tear faults, which were formed by along-strike extensional strains during spreading. Basement steps partitioned delta toe gravity spreading into dual, divergent directions. Similarities between the analogue model structures and the Niger Delta strongly suggest a history of outward radial gravity spreading at the Niger Delta. The Niger Delta western lobe has potentially spread downdip more rapidly due to a thicker or more highly overpressured underlying Akata Fm. shale detachment. Faster western lobe spreading may have produced the Niger Delta toe ‘dual lobe’ geometry, perturbed up dip Niger Delta top growth fault patterns, and implies that western lobe toe thrusts have been very active. 相似文献
4.
A physical experiment shows that shortening applied to existing diapirs and minibasins produces anomalous structural styles that are unlike those of more typical foldbelts. Strong minibasins remain largely undeformed while weak diapirs localize contractional strain. Short diapirs form the cores to folds and thrusted folds, whereas tall diapirs are squeezed and often welded, commonly leading to the extrusion of allochthonous material. Key features of the model are observed in real examples. In the northern Gulf of Mexico passive margin, minibasins were originally separated by a polygonal pattern of deep salt ridges, with diapirs located at ridge intersections. Gravity spreading resulted in squeezed diapirs (and associated allochthonous salt) connected by variably oriented contractional, extensional, and strike-slip structures. In the Flinders Ranges convergent-margin foldbelt of South Australia, preexisting diapirs were squeezed, welded, and thrusted, with anticlines plunging away in multiple directions, so that minibasins are surrounded by highly variable structures. A different geometry is observed in La Popa Basin, Mexico, where squeezing of a linear salt wall produced a vertical weld with diapirs at the terminations, rather than the culmination. In all areas, foldbelt geometries are strongly influenced by the preestablished salt-minibasin architecture. 相似文献
5.
Controls on turbidite sand deposition during gravity-driven extension of a passive margin: examples from Miocene sediments in Block 4, Angola 总被引：1，自引：0，他引：1
In recent years, exploration of the Lower Congo Basin in Angola has focused on the Neogene turbidite sand play of the Malembo Formation. Gravity tectonics has played an important role during deposition of the Malembo Formation and has imparted a well-documented structural style to the post-rift sediments. An oceanward transition from thin-skinned extension through mobile salt and eventually to thin-skinned compressional structures characterises the post-rift sediments. There has been little discussion, however, regarding the influence of these structures on the deposition of the Malembo Formation turbidite sands. Block 4 lies at the southern margin of the Lower Congo Basin and is dominated by the thin-skinned extensional structural style. Using a multidisciplinary approach we trace the post-rift structural and stratigraphic evolution of this block to study the structural controls on Neogene turbidite sand deposition.In the Lower Congo Basin the transition from terrestrial rift basin to fully marine passive margin is recorded by late Aptian evaporites of the Loeme Formation. Extension of the overlying post-rift sequences has occurred where the Loeme Formation has been utilised as a detachment surface for extensional faults. Since the late Cretaceous, the passive margin sediments have moved down-slope on the Loeme detachment. This history of gravity-driven extension is recorded in the post-rift sediments of Block 4. Extension commenced in the Albian in the east of the block and migrated westwards with time. In the west, the extension occurred mainly in the Miocene and generated allochthonous fault blocks or “rafts”, separated by deep grabens. The Miocene extension occurred in two main phases with contrasting slip vectors; in the early Miocene the extension vector was to the west, switching to southwest-directed extension in the late Miocene. Early Miocene faults and half-grabens trend north–south whereas late Miocene structures trend northwest–southeast. The contrast in slip vectors between these two phases emphasises the differences in driving mechanisms: the early Miocene faulting was driven by basinward tilting of the passive margin, but gravity loading due to sedimentary progradation is considered the main driver for the late Miocene extension. The geological evolution of the late Miocene grabens is consistent with southwest-directed extension due to southwest progradation of the Congo fan.High-resolution biostratigraphic data identifies the turbidite sands in Block 4 as early Miocene (17.5–15.5 Ma) and late Miocene (10.5–5.5 Ma) in age. Deposition of these sands occurred during the two main phases of gravity-driven extension. Conditions of low sedimentation rates relative to high fault displacement rates were prevalent in the early Miocene. Seafloor depressions were generated in the hangingwalls of the main extensional faults, ultimately leading to capture of the turbidity currents. Lower Miocene turbidite sand bodies therefore trend north–south, parallel to the active faults. Cross-faults and relay ramps created local topographic highs capable of deflecting turbidite flows within the half grabens. Flow-stripping of turbidity currents across these features caused preferential deposition of sands across, and adjacent to, the highs. Turbidite sands deposited in the early part of the late Miocene were influenced by both the old north–south fault trends and by the new northwest–southeast fault trends. By latest Miocene times turbidite channels crosscut the active northwest–southeast-trending faults. These latest Miocene faults had limited potential to capture turbidity currents because the associated hangingwall grabens were rapidly filled as pro-delta sediments of the Congo fan prograded across the area from the northeast. 相似文献
6.
Gravitational collapse structures are commonly observed in shelf-margin deltas underlain by mobile shales. However, these structures are rarely accompanied by mud diapirs. This paper presents an updated study of the gravity-driven system in the West Luconia Deltas, a shelf-margin delta system, in the Kangxi Depression, southern South China Sea. Compared to the classical shale-detachment model, the syn-collapse deformation in the contractional domain in this study is accommodated mainly by thrust faults combined with mud diapirs rather than simply imbricated thrusts. Based on seismic interpretation and structural analysis, this gravity-driven system is divided into three domains, the extensional domain, the contractional domain and the transitional domain. All of these domains are intruded by mud diapirs. The quantitative analysis of the amounts of extension and contraction suggests that these structures mainly resulted from gravitational collapse rather than the tectonic compression. Quantification of the relative contributions of gravity spreading and gliding indicates that the gravitational collapse was mainly driven by gravity spreading. Two episodes of collapse are suggested by the analysis of the progradation of the West Luconia Deltas and the features of the syn-collapse structures. The first episode was minor and not accompanied by diapirism, whereas the second episode was major and accompanied by diapirism. The entire evolution of the GDS is divided into five stages: (1) the first episode of the gravitational collapse, lasted from the earliest Middle Miocene to the earliest Pliocene; (2) the deposition of an interval between the syn-collapse strata and the mobile shale, occurred in the Early Pliocene.; (3) the initiation of the second episode of the gravitational collapse, lasted from the Early Pliocene to the Late Pliocene; (4) the attenuation and basinward migration of the gravity-driven deformation, lasted from the Late Pliocene to the Early Pleistocene; and (5) the ending of the gravitational collapse, lasted from the Early Pleistocene to the present. The last four stages were accompanied by intensive diapirs which pierced the overlying strata and became targets for the hydrocarbon exploration.
相似文献7.
The central part of the Zagros Fold-Thrust Belt is characterized by a series of right-lateral and left-lateral transverse tear fault systems, some of them being ornamented by salt diapirs of the Late Precambrian–Early Cambrian Hormuz evaporitic series. Many deep-seated extensional faults, mainly along N–S and few along NW–SE and NE–SW, were formed or reactivated during the Late Precambrian–Early Cambrian and generated horsts and grabens. The extensional faults controlled deposition, distribution and thickness of the Hormuz series. Salt walls and diapirs initiated by the Early Paleozoic especially along the extensional faults. Long-term halokinesis gave rise to thin sedimentary cover above the salt diapirs and aggregated considerable volume of salt into the salt stocks. They created weak zones in the sedimentary cover, located approximately above the former and inactive deep-seated extensional faults. The N–S to NNE–SSW direction of tectonic shortening during the Neogene Zagros folding was sub-parallel with the strikes of the salt walls and rows of diapirs. Variations in thickness of the Hormuz series prepared differences in the basal friction on both sides of the Precambrian–Cambrian extensional faults, which facilitated the Zagros deformation front to advance faster wherever the salt layer was thicker. Consequently, a series of tear fault systems developed along the rows of salt diapirs approximately above the Precambrian–Cambrian extensional faults. Therefore, the present surface expressions of the tear fault systems developed within the sedimentary cover during the Zagros orogeny. Although the direction of the Zagros shortening could also potentially reactivate the basement faults as strike-slip structures, subsurface data and majority of the moderate-large earthquakes do not support basement involvement. This suggests that the tear fault systems are detached on top of the Hormuz series from the deep-seated Precambrian–Cambrian extensional faults in the basement. 相似文献
8.
Using the seismic profiles and analog modeling, this paper addresses the salt structures in the M and B blocks in the Southern Precaspian Basin. The salt structural features, the formation mechanism and the controlling factors of structural deformation are investigated and discussed systematically. The interpretation of the seismic profiles shows that typical salt-related structures include salt wall, (flip-flop) salt diapir, salt roller, salt pillow (dome), salt weld, salt withdrawal minibasin and drag structure (or drape fold). In addition, model results demonstrate that the gravity spreading driven by progradation and aggradation is probably the primary factor in controlling the formation of the salt structures in the research area. Due to the differential loading driven by progradation, passive salt diapir developed near the progradational front followed by the formation of intrasalt withdrawal minibasin bounded by two salt diapirs, and secondary reactive triangle salt diapir or salt pillow might form within the intrasalt withdrawal minibasin. Model results also indicate that the pattern of the subsalt basement has important influence on the formation and evolution of salt structures. Salt diapirs primarily developed along the margin of the subsalt uplift basement, where high shear deformation was induced by differential sedimentary loading between the uplift area and the slope area. 相似文献
9.
Various studies have demonstrated the intrinsic interrelationship between tectonics and sedimentation in salt-related rift basins during extension as well as during their inversion by compression. Here, we present seven brittle–ductile analogue models to show that the longitudinal or transverse progradation of sediment filling an elongate extensional basin has a substantial impact on the growth of diapirs and their lateral geometrical variations. We use five extensional models to reveal how these prograding systems triggered diapir growth variations, from proximal to distal areas, relative to the sedimentary source. In the models, continuous passive diapir walls developed, after a short period of reactive–active diapiric activity, during syn-extensional homogeneous deposition. In contrast, non-rectilinear diapir walls grew during longitudinal prograding sedimentation. Both longitudinal and transverse post-extensional progradation triggered well-developed passive diapirs in the proximal domains, whereas incipient reactive–active diapirs, incipient roller-like diapirs, or poorly developed diapirs were generated in the distal domains, depending on the modelled sedimentary pattern. Two models included final phases of 6% and 10% shortening associated with basin inversion by compression, respectively, to discriminate compressional from purely extensional geometries. With the applied shortening, the outward flanks of existing diapir walls steepened their dips from 8°–17° to 30°–50°. Likewise, 6% of shortening narrowed the diapir walls by 32%–72%, with their fully closing (salt welds) with 10% of shortening. We compare our results with the distribution of salt walls and minibasins of the Central High Atlas diapiric basin in Morocco, which was infilled with a longitudinally prograding mixed siliciclastic and carbonatic depositional sequence during the Early–Middle Jurassic with a minimum thicknesses of 2.5–4.0 km. 相似文献
10.
西非被动大陆边缘盐构造样式与成因机制 总被引：1，自引：0，他引：1
基于三维地震资料,对西非陆缘盐构造样式及分布特征进行了刻画,剖析了其形成演化机制与控制因素。西非陆缘盐上地层滑脱形成典型的薄皮构造,前缘发育挤压变形,后缘发育拉张变形,两者之间为过渡变形。拉张区发育白垩系盐筏、前盐筏、新近系盐筏等盐构造;过渡变形区以发育各种底辟构造为特征;挤压变形区主要发育侵位盐席构造。重力滑脱作用是被动陆缘盐构造发育过程中始终存在的驱动机制,重力扩展作用在大陆边缘成熟阶段作用明显,在陆缘演化早期并不突出。陆缘构造活动控制盐构造的形成,差异沉积负载作用影响着盐上地层滑移特征,而盐下底形对盐岩流动、盐上地层滑移速率及相关断裂体系的产生与沉积响应具有重要影响。 相似文献
11.
The seismic stratigraphy, evolution and depositional framework of a sheared-passive margin, the Durban Basin, of South East Africa are described. Based on single-channel 2D seismic reflection data, six seismic units (A-F) are revealed, separated by major sequence boundaries. These are compared to well logs associated with the seismic data set. Internal seismic reflector geometries and sedimentology suggest a range of depositional regimes from syn-rift to upper slope and outer shelf. Nearshore and continental facies are not preserved, with episodic shelf and slope sedimentation related to periods of tectonic-induced base level fall. The sedimentary architecture shows a change from a structurally defined shelf (shearing phase), to shallow ramp and then terminal passive margin sedimentary shelf settings. Sedimentation occurred predominantly during normal regressive conditions with the basin dominated by the progradation of a constructional submarine delta (Tugela Cone) during sea-level lowstands (LST). The earlier phases of sedimentation are tectonic-controlled, however later stages appear to be linked to global eustatic changes. 相似文献
12.
The western South Korea Plateau in the East Sea (Sea of Japan) is occupied by rifted continental fragments formed in association
with the early phase of back-arc opening. The present study focuses on the seismic stratigraphy of the sedimentary succession
and the underlying acoustic basement in this region, based on closely spaced multichannel seismic reflection profiles. The
sedimentary succession occurs mainly within a series of subparallel basement troughs (grabens or half grabens) bounded by
faulted continental blocks (horsts) or volcanic ridges, and commonly floored by extrusive volcanic rocks showing hyperbolic
reflectors. These features are strongly suggestive of continental rifting accompanied by normal faulting, volcanic activity
and high rates of basin subsidence. The sedimentary succession can be subdivided into four seismic units. Unit 1 is characterized
by short and irregular high-amplitude reflectors and interpreted as a syn-rift deposit consisting of a non-marine volcanics/sediment
complex in topographic lows. Units 2 and 3 formed in an open marine environment during the Middle Miocene to Early Pliocene,
characterized by an onlap-fill and later draping marine sedimentary succession dominantly composed of hemipelagic sediments
and turbidites with frequent intercalation of mass-flow deposits. Along the western margin of the plateau, these units were
deformed under a compressional regime in the Early Pliocene, associated with the back-arc closing phase. Unit 4 (deposited
since the Early Pliocene) comprises hemipelagic sediments and turbidites with evidence of sporadic slides/slumps. 相似文献
13.
Elongate trending diapiric structures occur along faulted rifts in the Gulf of Elat. Those diapirs in the southern part of the Gulf, believed to be of salt origin were formed in the embryonic continental margin during the separation of the Nubian and Arabian plates. The diapirs farther to the north are believed to be of shale origin. These findings support other recent geological evidence suggesting that the tectonic regime in the region is obliquely extensional. Comparison with the structure of the Suez Rift indicates a jump of the northern extension of the Red Sea spreading center during the early Pliocene period. 相似文献
14.
《Deep Sea Research Part II: Topical Studies in Oceanography》2009,56(23):2169-2182
The Congo deep-sea fan is one of the largest fans in the world still affected by presently active turbidity currents. The present activity of deep-sea sedimentary processes is linked to the existence of a direct connection between the Congo River estuary and the Congo canyon head that allows relatively continuous sediment feeding of the deep-sea environment, in spite of a wide continental shelf (150 km). Because of this important activity in terms of sedimentary processes, the deep-sea environment of the Congo–Angola margin presents major interests concerning physical, chemical and biological studies near the seafloor.The main aim of this paper is to present the initial geological context of the BioZaire Program, showing a synthesis of the major results of the ZaïAngo Project including (1) the brief geological setting of the Congo–Angola margin, (2) the structure of the modern Congo deep-sea fan, (3) the sedimentary architecture of the recent Congo turbidite system (from the canyon to the distal lobes) and (4) the recent and present turbidite sedimentation. In order to provide useful information and advice relevant to biological and geochemical studies across the Congo sedimentary system, this article is particularly focused on the present sedimentary processes and the present activity of turbidity current along the Congo canyon and channel. 相似文献
15.
现代黄河三角洲钓口叶瓣体沉积相及其沉积动力环境特征 总被引：1，自引：0，他引：1
The Huanghe River captures the Diaokou River in 1964 and forms a deltaic lobe in the subsequent 12 a. The progradational process of the Diaokou lobe is in associated with complicated evolution of riverine sheet flooding,merging, and swinging. On the basis of 11 borehole cores and 210 km high resolution seismic reflection data set,the sedimentary sequence and dynamic environment of the Diaokou lobe(one subdelta lobe of the modern Huanghe River Delta) are studied. The stratigraphy of the lobe is characterized by an upward-coarsening ternary structure and forms a progradational deltaic clinoform. Totally six seismic surfaces are identifiable in seismic profiles, bounded six seismic units(SUs). These SUs correspond to six depositional units(DUs) in the borehole cores, and among them, SUs 4–6(DUs D to F) consist of the modern Diaokou lobe. Lithological and seismic evidences indicate that the delta plain part of the Diaokou lobe is comprised primarily by fluvial lag sediments together with sediments from sidebanks, overbanks, fluvial flood plains and levees, while the delta front part is a combination of river mouth bar sands(majority) and distal bar and deltaic margin sediments(minority). As a result of the high sedimentation rate and weak hydrodynamic regime in the Huanghe River Delta, the sediments in the delta front are dominated by fine-grained materials. The grain size analysis indicates the Huanghe River hyperpycnal-concentrated flow shows the suspension, transportation and sedimentation characteristics of gravity flow, and the sediment transportation is primarily dominated by graded suspension, while uniform suspension and hydrostatic suspension are also observed in places. The strength of the hydrodynamic regime weakens gradually offshore from riverbed, river mouth bar, sidebank, distal bar subfacies to delta lateral margin and flooding plain subfacies. 相似文献
16.
High resolution seismic profiles from the Canadian Beaufort Sea continental slope characteristically show a surficial 50 m
thick conformably stratified unit overlying an irregular erosion surface. This stratified unit appears to be compressionally
folded and associated with minor faults. At the shelf break, there are numerous indicators of a tensional regime, such as
a large, slope-parallel graben and numerous mud diapirs. Although a large-scale slide-scar was mapped in one area, most of
the slope is interpreted to be deforming by a creep mechanism. Preliminary calculations can provide reasonable values for
the fold wave length and rate of deformation, supporting the suggestion that time dependent creep deformation has occurred
in this area. 相似文献
17.
The Ukrainian Dniepr-Donets Basin (DDB) is a Late Palaeozoic intracratonic rift basin, with sedimentary thicknesses up to 19 km, displaying the effects of salt tectonics during its entire history of formation, from Late Devonian rifting to the Tertiary. Hundreds of concordant and discordant salt structures formed during this time. It is demonstrated in this paper that the variety of styles of salt structure formation in the DDB provide important constraints on understanding the triggering and driving mechanisms of salt kinematics in sedimentary basins in general. Salt movement in the DDB began during the Devonian syn-rift phase of basin development and exerted controls on the later distribution of salt structures though the geometry of basement faults is not directly responsible for the regular spacing of salt structures. Post-rift salt movements in the DDB occurred episodically. Episodes of salt movement were triggered by tectonic events, specifically two extensional events during the Carboniferous, an extensional reactivation at the end of Carboniferous–earliest Permian, and a compressional event at the end of the Cretaceous. Extensional events that induced salt movement were ‘thick-skinned’ (i.e. basement involved in deformation) rather than ‘thin-skinned’. Most overburden deformation related to salt movements is ductile regardless of sedimentary bulk lithology and degree of diagenesis, while the deformation of sedimentary cover in areas where salt is absent is mainly brittle. This implies that the presence of salt changes the predominant mode of deformation of overlying sedimentary rocks. Episodes of salt movement lasted longer than the periods of active tectonics that initiated them. Buoyancy, erosion, and differential loading all played a role in driving halokinesis once tectonic forces had pushed the salt-overburden system into disequilibrium; among these factors, erosion of overburden above growing salt structures acted as a key self-renewing force for development of salt diapirs. Very high sedimentation rates (related to high post-rift tectonic subsidence rates), particularly during the Carboniferous, were able to bury diapirs and to load salt bodies such that buoyancy, erosion, and differential loading forces eventually became insufficient to continue driving diapirism—until the system was perturbed by an ensuing tectonic event. In contrast, some salt anticlines and diapirs developed continuously during the entire Mesozoic because of much-reduced tectonic subsidence rates (and sedimentation supply) during this time. However, a Lower Permian salt series and overhangs of buried diapirs played an important role in preventing overburden piercing (and fracturing) during the Mesozoic and, specifically, during the Late Cretaceous salt diapirism phase. 相似文献
18.
南海西南次海盆被动陆缘洋陆转换带位于陆缘强烈伸展区,蕴含着岩石圈临界伸展破裂和洋盆扩张过程的丰富信息。本文利用多道地震剖面和重力异常数据,对西南次海盆被动陆缘构造单元进行划分,研究陆缘南、北部洋陆转换带结构构造特征,探讨陆缘伸展演化过程。多道地震剖面资料显示,北部洋陆转换带发育有裂陷期断陷和向海倾斜的掀斜断块;南部发育有低角度正断层控制的裂陷期断陷、海底火山以及局部隆起;从陆到洋方向,重力异常值变化明显。根据上述结果南海西南次海盆被动陆缘划分为近端带、洋陆转换带和洋盆三个构造单元,分别对应了其伸展演化过程的三个阶段：前裂谷阶段、陆缘裂陷阶段和海底扩张阶段。 相似文献
19.
Three-dimensional (3D) seismic data acquired for hydrocarbon exploration reveal that gas accumulations are common within the
2–3 km thick Plio-Pleistocene stratigraphic column of the south-western Barents Sea continental margin. The 3D seismic data
have relatively low-frequency content (<40 Hz) but, due to dense spatial sampling, long source-receiver offsets, 3D migration
and advanced interpretation techniques, they provide surprisingly detailed images of inferred gas accumulations and the sedimentary
environments in which they occur. The presence of gas is inferred from seismic reflection segments with anomalously high amplitude
and reversed phase, compared with the seafloor reflection, so-called bright spots. Fluid migration is inferred from vertical
zones of acoustic masking and acoustic pipes. The 3D seismic volume allows a spatial analysis of amplitude anomalies inferred to reflect the presence of gas and fluids. At several locations, seismic attribute
maps reveal detailed images of flat spots, inferred to represent gas–water interfaces. The data indicate a focused fluid migration
system, where sub-vertical faults and zones of highly fractured sediments are conduits for the migration of gas-bearing fluids
in Plio-Pleistocene sediments. Gas is interpreted to appear in high-porosity fan-shaped sediment lobes, channel and delta
deposits, glacigenic debris flows and sediment blocks, probably sealed by low-permeability, clayey till and/or (glacio)marine
sediments. Gas and fluid flow are here attributed mainly to rapid Plio-Pleistocene sedimentation that loaded large amounts
of sedimentary material over lower-density, fine-grained Eocene oozes. This probably caused pore-fluid dewatering of the high-fluid
content oozes through a network of polygonal faults. The study area is suggested to have experienced cycles of fluid expulsion
and hydrocarbon migration associated with glacial–interglacial cycles. 相似文献
20.
Giovanni GuglielmoJr Bruno C. Vendeville Martin P. A. Jackson 《Marine and Petroleum Geology》1999,16(8):181
Diapir fall, which was predicted by physical models, has been identified in salt provinces, such as the South Atlantic margins, the North Sea, and the Paradox Basin (Colorado–Utah). However the 3-D geometry of falling diapirs and their country rock is still poorly understood. 3-D visualization and isochore patterns from a physical model help elucidate this geometry.The model initially comprised a unit of viscous silicone overlain by a prekinematic sand unit. Sand units representing brittle sediments were deposited episodically during gravity gliding and spreading. Regional extension triggered and eventually widened salt walls, causing them to sag. The 3-D visualization shows that regional hydrocarbon migration, which tends to be seaward during diapir rise and landward during diapir fall, can potentially be orthogonal to local migration along grabens at soft-linked zones of relay ramps. Furthermore, anticlinal culminations may form (1) in horsts that bend along strike and (2) adjoining the fork of Y-shaped salt walls.Sequential isochore maps of the overburden show how patterns of sedimentation, deformation, and underlying salt thickness changed through time. Isochores of prekinematic units record only strain: thinned belts record early extension. In contrast, isochores of synkinematic units record mostly thickness variations due to deposition on actively deforming topography. Isochores above sagging diapirs identify the thickest part of crestal depocenters, where the most rapid sagging occurred in regions of maximum extension near the unbuttressed downdip part of the gravity-spreading system. Additionally, asymmetric isochore patterns may reveal underlying half-grabens or tilted symmetric grabens. In relay systems, overlying isochores may indicate which part of a salt wall rose to compensate for sagging elsewhere in the relay. 相似文献