共查询到18条相似文献，搜索用时 465 毫秒
1.
饱和多孔介质热-水-力控制方程耦合项的意义及耦合影响分析 总被引：2，自引：0，他引：2
基于饱和多孔介质完全耦合条件下热-水-力控制方程的一般形式,对各耦合项的物理意义进行了分析。以等温条件下水-力耦合的Biot渗透固结理论和等压条件下热-力耦合的热弹性理论两种退化形式为基础,给出耦合系数的物理意义及其函数表达式。研究表明,其中一些耦合系数实际上有相同的物理意义和数学形式,因而可使控制方程得到简化。针对不同的介质特性以及热、水、力条件,给出几种特定情形下控制方程的简化形式。以无限大多孔介质中球域热源的热力学响应分析为例,对一些耦合项的影响程度进行了比较研究。 相似文献
2.
《岩土力学》2020,(1):315-324
基于多孔介质理论和广义的热弹性模型,研究了饱和多孔热弹性介质中Rayleigh波(R波)的传播特性。以考虑流-固耦合的饱和多孔介质波动方程和连续性方程及考虑热-弹耦合的广义热弹性基本方程出发,建立了饱和多孔介质的热-流-固耦合弹性波动模型。通过引入势函数并结合自由透水及绝热的边界条件,经过理论推导最终给出了饱和多孔热弹性介质中R波的弥散特征方程。利用数值算例分析了孔隙率、渗透系数、热膨胀系数、初始温度和松弛时间等热物理参数对R波的波速和特征衰减的影响。结果表明:孔隙率的增加将引起R波的波速下降,但使得R波的特征衰减反而增大;R波的波速随着渗透系数的增大先不变,再急剧增大,最后趋于稳定,其特征衰减随着渗透系数的增加先增大后减小,最后趋于稳定;热膨胀系数的增大将引起R波波速的增大,但对其特征衰减的影响较小;初始温度的增加导致R波波速的小幅上升,而对其特征衰减影响不大;松弛时间对R波波速和特征衰减几乎无影响。 相似文献
3.
基于Biot波动理论和广义热弹性理论,对简谐线源荷载（力荷载和热荷载）作用下的热-流-固耦合地基的动力响应问题进行了研究。将地基看成是均质各向同性、完全饱和的多孔半空间介质,利用无量纲化和Fourier变换方法对热-流-固耦合控制方程进行简化,得到了变换域内应力分量、位移分量、温度分布及超孔隙水压力的一般解,并利用Fourier逆变换得到了相应的积分形式解答。通过数值计算对按热-流-固耦合理论、饱和多孔弹性理论和热弹性理论得到的结果进行了比较,同时分析了热-流-固耦合条件下热荷载激振频率对竖向应力、竖向位移、温度分布以及超孔隙水压力的影响。 相似文献
4.
《岩土力学》2021,(5)
为了研究温度变化对一维饱和土固结特性的影响,本文基于渗流方程和热传导方程,考虑了顶面边界的半透水性和热传导性,提出了变荷载作用下考虑半透水边界热传导性的一维饱和土热固结的半解析解,并分析了其固结特性。首先,引入Laplace变换分别求解了半透水边界条件下热力耦合模型和非热力耦合模型的一维饱和土热固结方程,推出了有效应力、温差和沉降的半解析解。其次,通过Crump方法进行Laplace数值反演,得到时间域内的解析解。然后,将本文已提出的解分别退化为单边排水条件下的一维饱和土热固结和Terzaghi一维固结的半解析解,结果与已有文献相同,验证了本文研究所推导出解的可靠性。最后通过算例分析了各外荷载作用下半透水边界参数、温度增量、热扩散系数和固结系数对热固结特性的影响。结果表明,半透水边界参数、热扩散系数、固结系数和温度增量对饱和土一维固结特性影响显著。 相似文献
5.
《岩土力学》2020,(5)
为了研究温度变化对一维饱和土固结特性的影响,基于渗流方程和热传导方程,考虑了顶面边界的半透水性和热传导性,提出了变荷载作用下考虑半透水边界热传导性的一维饱和土热固结的半解析解,并分析了其固结特性。首先,引入Laplace变换分别求解了半透水边界条件下热力耦合模型和非热力耦合模型的一维饱和土热固结方程,推出了有效应力、温差和沉降的半解析解;其次,通过Crump方法进行Laplace数值反演,得到时间域内的解析解;然后,将所提解分别退化为单边排水条件下的一维饱和土热固结和Terzaghi一维固结的半解析解,结果与已有文献相同,验证了所推导解的可靠性;最后,通过算例分析了各外荷载作用下半透水边界参数、温度增量、热扩散系数和固结系数对热固结特性的影响。结果表明,半透水边界参数、热扩散系数、固结系数和温度增量对饱和土一维固结特性影响显著。 相似文献
6.
《岩土力学》2016,(9):2599-2602
推导了有限矩形区域饱和多孔介质因表面载荷诱发的Biot固结的一个解析解。假设多孔介质为均匀各向同性和线弹性,并被单相流体所饱和;控制方程组采用不可压缩多孔介质模型;孔隙压力场采用狄利克雷边界条件,上下表面位移场符合物理边界,而左右侧面位移场边界条件则由人为特别给定。利用有限正余弦变换和拉普拉斯变换及数值反演获得了物理空间孔隙压力场和位移场的半解析解,其体现为双重级数和的封闭形式。最后以某软黏土层平面应变固结为例,利用有限元分析软件ABAQUS对所给出的解析解进行了验证,同时基于该解析解考察了孔隙压力场和位移场的时空演化规律。所给出的解析解可用于深入分析有限二维饱和多孔介质的流-固耦合力学行为。 相似文献
7.
二维饱和多孔介质因点汇诱发比奥固结的解析解 总被引：1，自引：0，他引：1
给出了有限二维饱和多孔介质因点汇诱发的Biot固结的一个解析解。其中假设多孔介质为均匀各向同性和线弹性,假设孔隙压力场符合第1类边界条件,数学模型采用可压缩多孔介质模型。利用傅里叶和拉普拉斯变换及相应反演获得了双重无穷项级数和形式的精确解。然后特别探讨了定流量点汇诱发的稳态解析解,并用文献现有解析解进行了验证。所提出的解析解适合于验证数值解,并可用于深入分析有限二维多孔介质的流-固耦合行为。 相似文献
8.
针对塑料排水板(PVD)安装热源能提升PVD性能、加速竖井地基固结这一工程现象,基于热-水-应力 (T-H-M) 三场全耦合的有限元方法来模拟利用热源进行地基处理新技术(PVTD)。首先,以微分形式与等效弱形式分别给出T-H-M耦合控制方程,并推导出其有限元方程组。然后在多场耦合有限元软件中建立饱和土的T-H-M全耦合模型,并通过与已有解析解比较,验证了模型正确性。最后,对一个经典有涂抹区的竖井地基算例,分不耦合温度(UT)、耦合温度但不考虑其对饱和土物性影响(CT)、耦合温度考虑温度对饱和土渗透性影响(CTP) 3种情况进行固结计算分析。研究结果表明,相对于无热源竖井地基,CT情况下由于热源产生的附加孔隙水压力,固结速度略有下降;CTP情况下,由于热源有效改善涂抹区的渗透性能,竖井地基固结速率明显加快。上述研究结论从理论上较好地阐明了PVTD的作用机制。 相似文献
9.
为弥补当前河岸带水热交换模拟对土体非均质传热考虑不足的缺陷,在饱和-非饱和渗流及多孔介质传热理论基础上,引入土体有效导热系数模型,构建考虑土体非均质传热的河岸带水热耦合模型。结合COMSOL软件的特点,给出河岸带水热耦合模型的实现方法及求解流程,并通过河岸带温度和水位原型观测资料验证和对比分析不同有效导热系数模型下河岸带水热耦合模型的模拟效果。结果表明:与传统不考虑土体非均质传热方法相比,该模型能够较好地反映河岸带水热交换过程。此外,基于Johansen有效导热系数模型的河岸带水热耦合模型模拟效果表现最佳,模拟结果与前人试验结果一致。研究成果可为河岸带水热交换及污染物迁移过程的深入研究提供技术支撑。 相似文献
10.
11.
In this paper, a fully coupled thermo-hydro-mechanical model is presented for two-phase fluid flow and heat transfer in fractured/fracturing porous media using the extended finite element method. In the fractured porous medium, the traction, heat, and mass transfer between the fracture space and the surrounding media are coupled. The wetting and nonwetting fluid phases are water and gas, which are assumed to be immiscible, and no phase-change is considered. The system of coupled equations consists of the linear momentum balance of solid phase, wetting and nonwetting fluid continuities, and thermal energy conservation. The main variables used to solve the system of equations are solid phase displacement, wetting fluid pressure, capillary pressure, and temperature. The fracture is assumed to impose the strong discontinuity in the displacement field and weak discontinuities in the fluid pressure, capillary pressure, and temperature fields. The mode I fracture propagation is employed using a cohesive fracture model. Finally, several numerical examples are solved to illustrate the capability of the proposed computational algorithm. It is shown that the effect of thermal expansion on the effective stress can influence the rate of fracture propagation and the injection pressure in hydraulic fracturing process. Moreover, the effect of thermal loading is investigated properly on fracture opening and fluids flow in unsaturated porous media, and the convective heat transfer within the fracture is captured successfully. It is shown how the proposed computational model is capable of modeling the fully coupled thermal fracture propagation in unsaturated porous media. 相似文献
12.
The thermomechanical responses of a porous elastic medium subjected to time harmonic loads (normal force and thermal source) are investigated analytically in the context of generalised thermoelastic theory with one relaxation time. The material of the foundation, obeying Biot’s dynamic poroelastic theory, is idealised as a uniform, fully saturated poroelastic half-space stratum. The coupled governing equations are established based on Biot’s dynamic poroelastic theory and on generalised thermoelastic theory. Assuming the disturbances to be harmonically time dependent, the general solutions of stress, displacement, temperature distribution and excess pore water pressure are deduced using the Fourier transform, and the transformed solutions are numerically inverted. The differences among the coupled thermo-hydro-mechanical dynamic model (THMD), the hydro-mechanical dynamic model (HMD) and the thermo-elastic dynamic model (TMD) are discussed. In addition, the effects of the thermal loading frequency on the displacement, stress, temperature distribution and excess pore water pressure components are analysed in the numerical results. 相似文献
13.
This paper presents a theoretical approach to analyse coupled, linear thermoporoelastic fields in a saturated porous medium under radial and spherical symmetry. The governing equations account for compressibility and thermal expansion of constituents, heat sink due to thermal dilatation of water and thermal expansion of the medium, and thermodynamically coupled heat–water flow. It has been reported in the literature that thermodynamically coupled heat–water flows known as thermo-osmosis and thermal filtration have the potential to significantly alter the flow fields in clay-rich barriers in the near field of a underground waste containment scheme. This study presents a mathematical model and examines the effects of thermo-osmosis and thermal-filtration on coupled consolidation fields in a porous medium with a cavity. Analytical solutions of the governing equations are presented in the Laplace transform space. A numerical inversion scheme is used to obtain the time-domain solutions for a cylindrical cavity in a homogeneous or a non-homogeneous medium. A closed form time-domain solution is presented for a spherical cavity in a homogeneous medium. Selected numerical solutions for homogeneous and non-homogeneous media show a significant increase in pore pressure and displacements due to the presence of thermodynamically coupled flows and a negligible influence on temperature. © 1998 John Wiley & Sons, Ltd. 相似文献
14.
The response of saturated porous medium is of significant interest in many fields ranging from geomechanics to biomechanics. Biot was the first to formulate the basic equations governing the process of coupled flow and deformation in porous media. Depending on the nature of loading vis‐à‐vis the characteristics of the media, different formulations (fully dynamic, partly dynamic, quasi‐static) are possible. In this study, analytical solutions are developed for the response of saturated and nearly saturated porous media under plane strain condition. The solutions for different formulations are developed in terms of non‐dimensional parameters. The response is studied for various conditions and the regions of validity for various formulations are identified in a parametric space. An assessment of the needed formulation for few important problems is also presented. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
15.
A general analysis using an incremental elastic, perfectly plastic constitutive stress–strain relationship for poroelastoplastic materials is presented to simulate an opening in a low-permeability friable porous medium under non-isothermal conditions. Analytical solutions are obtained for the stresses and strains around a 2-D plane strain circular borehole. An expansion potential is introduced by combining the strains induced by temperature and pore pressure changes. Steady-state pressures and temperatures are considered, and a non-associated plastic flow rule is applied to calculate plastic strains. Focusing on stress distribution near a circular opening, the classic solutions for those stresses under dry and isothermal conditions are used to compare with the newly derived solution. The general poroelastoplastic effect and the thermal effect on sand production and borehole stability are addressed. We suggest that the knowledge of stress history is critical to achieve adequate solutions for displacement and stress in friable media such as clays, shales and oil sands. 相似文献
16.
The response of a semi‐infinite saturated porous medium subjected to a harmonic thermal loading on its free face is studied herein. The pressure diffusion equation that governs the fluctuation of the interstitial pressure is established. It allows us to obtain prevalent parameters, i.e. the thermal and fluid mass diffusivities and the coefficient of relative bulk variation. Closed‐form solutions of the maximum fluid pressure Pmax and its location xcr are derived. It is shown that the location xcr of Pmax is localized and depends on the diffusivity ratio and the frequency of the thermal loading while the magnitude of Pmax depends on the diffusivity ratio and the thermal amplitude. Master curves for xcr and Pmax versus diffusivity ratio are built. It follows that three regimes can be distinguished: namely, thin spalling, thick spalling or in‐depth cracking and no cracking. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
17.
18.
Based on the frame of elastic theory for unsaturated porous medium, considering the influence of thermal effect, the propagation characteristics of Rayleigh wave in unsaturated porous media are studied. Firstly, the thermoelastic wave equations for three-phase porous media are established, in which the mass balance equations, generalized Darcy law, momentum balance equations, and generalized non-Fourier heat conduction law are taken into account. Secondly, through theoretical derivation, the dispersion equation of Rayleigh wave for unsaturated porothermoelastic media is given by introducing the potential functions. Finally, the variations of the phase velocity of Rayleigh wave are analyzed with numerical examples. The results show that the thermal conductivity has little effect on the phase velocity of Rayleigh wave. The phase velocity of Rayleigh wave increase with increasing of the thermal expansion coefficient and media temperature. 相似文献