首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
The effect of nutrient and surfactant addition on the biodegradation of phenanthrene was studied in a batch scale soil–slurry system using isolated Mycoplana sp. MVMB2strain. The study was conducted using an artificially phenanthrene spiked and as well as contaminated soil from petrochemical industrial site. Maximum phenanthrene degradation and subsequent high microbial growth were observed at optimum pH (pH 6) and C/N/P ratio (100:20:3). To investigate maximum substrate degradation potential of Mycoplana sp. MVMB2, very high concentrations of phenanthrene (50–200 mg/kg soil) were used. The organism was capable of degrading >60% for a concentration below 20 mg/kg soil and >40% for concentrations up to 200 mg/kg within 8 days. Further the influence of five different surfactants namely Span 80, Tween 20, Triton X‐100, cetyl trimethyl ammonium bromide, and sodium dodecyl sulfate were tested at their critical micelle concentration (CMC) levels for phenanthrene degradation in the soil. The addition of surfactant enhanced the biodegradation and a maximum of 84.49% was obtained for Triton X‐100. Complete phenanthrene degradation by Mycoplana sp. MVMB2 was observed at 3 CMC concentration of Triton X‐100. The optimized parameters obtained were used for the degradation of phenanthrene present in the contaminated soil and 98.6% biodegradation was obtained. Thus, the results obtained in the study suggested that biodegradation of phenanthrene by Mycoplana sp. MVMB2 appeared to be feasible to remediate phenanthrene rich contaminated sites.  相似文献   

2.
This study presents the degradation of phenanthrene by Mycoplana sp. MVMB2 isolated from petroleum contaminated soil and the media optimization by factorial design experiments. The Plackett–Burman design was used to evaluate the effects of eight variables (potassium dihydrogen phosphate, disodium hydrogen phosphate, magnesium sulfate, calcium chloride, ferrous sulfate, glucose, inoculum concentration, and phenanthrene concentration) on phenanthrene degradation. Based on the results, the critical medium components having significant influence on the degradation were found to be disodium hydrogen phosphate, magnesium sulfate, ferrous sulfate, and phenanthrene. Furthermore, these four variables were used as central composite design parameters. The optimum minimal salt medium composition obtained by conventional and factorial design experiments for the degradation of phenanthrene by Mycoplana sp. MVMB2 at pH 6.5 and 30°C were found to be, potassium 2.5 g/L dihydrogen phosphate, 0.3505 g/L disodium hydrogen phosphate, 0.5501 g/L magnesium sulfate, 0.02 g/L calcium chloride, 0.0261 g/L ferrous sulfate, 0.6756 g/L phenanthrene, 0.5 g/L glucose, 0.5 g/L ammonium sulfate, and inoculum 5% v/v. The phenanthrene degradation was confirmed by analyzing the metabolites formed.  相似文献   

3.
Response surface methodology (RSM) was employed to investigate the effects of different operational parameters on the biological decolorization of a dye solution containing malachite green (MG) in the presence of macroalgae Chara sp. The investigated variables were the initial pH, initial dye concentration, algae amount, and reaction time. Central composite design (CCD) was used for the optimization of biological decolorization process. Predicted values were found to be in good agreement with experimental values (R2 = 0.982 and Adj‐R2 = 0.966), which indicated suitability of the employed model and the success of RSM. The results of optimization predicted by the model showed that maximum decolorization efficiency was achieved at the optimum condition of the initial pH 6.8, initial dye concentration 9.7 mg/L, algae amount 3.9 g, and reaction time 75 min. UV–VIS spectra and FT‐IR analysis showed degradation of MG.  相似文献   

4.
A preliminary study was undertaken to determine the optimal conditions for the biodegradation of a crude oil. Among 57 oil‐degrading bacterial cultures isolated from oil‐contaminated soil samples, Bacillus sp. IOS1‐7, Corynebacterium sp. BPS2‐6, Pseudomonas sp. HPS2‐5, and Pseudomonas sp. BPS1‐8 were selected for the study based on the efficiency of crude oil utilization. Along with the selected individual strains, a mixed bacterial consortium prepared using the above strains was also used for degradation studies. The mixed bacterial consortium showed more growth and degradation than did individual strains. At 1% crude oil concentration, the mixed bacterial consortium degraded a maximum of 77% of the crude oil. This was followed by 69% by Pseudomonas sp. BPS1‐8, 64% by Bacillus sp. IOS1‐7, 45% by Pseudomonas sp. HPS2‐5, and 41% by Corynebacterium sp. BPS2‐6. The percentage of degradation by the mixed bacterial consortium decreased from 77 to 45% as the concentration of crude oil was increased from 1 to 12%. Temperature of 35°C and pH 7 were found to be optimum for maximum degradation.  相似文献   

5.
Pseudomonas putida MHF 7109 has been isolated and identified from cow dung microbial consortium for biodegradation of selected petroleum hydrocarbon compounds – benzene, toluene, and o‐xylene (BTX). Each compound was applied separately at concentrations of 50, 100, 250, and 500 mg L?1 in minimal salt medium to evaluate degradation activity of the identified microbial strain. The results indicated that the strain used has high potential to degrade BTX at a concentration of 50 mg L?1 within a period of 48, 96, and 168 h, respectively; whereas the concentration of 100 mg L?1 of benzene and toluene was found to be completely degraded within 120 and 168 h, respectively. Sixty‐two percent of o‐xylene were degraded within 168 h at the 100 mg L?1 concentration level. The maximum degradation rates for BTX were 1.35, 1.04, and 0.51 mg L?1 h?1, respectively. At higher concentrations (250 and 500 mg L?1) BTX inhibited the activity of microorganisms. The mass spectrometry analysis identified the intermediates as catechol, 2‐hydroxymuconic semialdehyde, 3‐methylcatechol, cis‐2‐hydroxypenta‐2,4‐dienoate, 2‐methylbenzyl alcohol, and 1,2‐dihydroxy‐6‐methylcyclohexa‐3,5‐dienecarboxylate, for BTX, respectively. P. putida MHF 7109 has been found to have high potential for biodegradation of volatile petroleum hydrocarbons.  相似文献   

6.
Response surface methodology (RSM) employing the three‐level Box–Behnken factorial design was used to optimize the biosorption of Ag(I) by the macrofungus Pleurotus platypus. The initial Ag(I) concentration (100–300 mg/L), pH (3.0–9.0), and biomass dosage (1.0–5.0 g/L) were chosen as the process variables for the optimization. A coefficient of determination (R2) value (0.99), model F value (234.18), and its low p‐value (F < 0.0001) along with the lower value of coefficient of variation (2.44%) indicated the fitness of response surface quadratic model during the present study. At the optimum pH (6.0), initial metal concentration (220 mg/L), and biomass dosage (3.0 g/L), the model predicted 46.7 mg/g Ag(I) uptake and an experimental 46.77 mg/g Ag(I) uptake by P. platypus was obtained. This is the first report on Ag(I) sorption by P. platypus using statistical experimental design employing RSM which may be helpful towards the treatment of industrial effluent containing silver.  相似文献   

7.
The risk that benzene and toluene from spills of gasoline will impact drinking water wells is largely controlled by the natural anaerobic biodegradation of benzene and toluene. Benzene and toluene, as well as ethanol and other biofuels, are degraded under anaerobic conditions to the same pool of degradation products. Biodegradation of biofuels may produce concentrations of degradation products that make the thermodynamics for degradation of benzene and toluene infeasible under methanogenic conditions and produce larger plumes of benzene and toluene. This study evaluated the concentrations of fuel alcohols that are necessary to inhibit the anaerobic degradation of benzene and toluene under methanogenic conditions. At two ethanol spill sites, concentrations of ethanol greater ≥42 mg/L inhibited the anaerobic degradation of toluene. The pH and concentrations of acetate, dissolved inorganic carbon, and molecular hydrogen were used to calculate the Gibbs free energy for the biodegradation of toluene. In general, the anaerobic biodegradation of toluene was not thermodynamically feasible in water with ≥42 mg/L ethanol. In a microcosm study, when the concentrations of ethanol were ≥14 mg/L or the concentrations of n‐butanol were ≥16 mg/L, the biodegradation of the alcohols consistently produced concentrations of hydrogen, dissolved inorganic carbon, and acetate that would preclude natural anaerobic biodegradation of benzene and toluene by syntrophic organisms. In contrast, iso‐butanol and n‐propanol only occasionally produced conditions that would preclude the biodegradation of benzene and toluene.  相似文献   

8.
Adaptive site management and aggressive bioremediation in the source zone of a complex chlorinated dense nonaqueous phase liquid (DNAPL) site reduced total chlorinated hydrocarbon mass discharge by nearly 80%. Successful anaerobic bioremediation of chlorinated hydrocarbons can be impaired by inadequate concentrations of electron donors, competing electron acceptors, specific inhibitors such as chloroform, and potentially by high contaminant concentrations associated with residual DNAPL. At the study site, the fractured bedrock aquifer was impacted by a mixture of chlorinated solvents and associated daughter products. Concentrations of 1,1,2,2‐tetrachloroethane (1,1,2,2‐TeCA), 1,1,2‐trichloroethane (1,1,2‐TCA), and 1,2‐dichloroethane (1,2‐DCA) were on the order of 100 to 1000 mg/L. Chloroform was present as a co‐contaminant and background sulfate concentrations were approximately 400 mg/L. Following propylene glycol injections, concentrations of organohalide‐respiring bacteria including Dehalococcoides and Dehalogenimonas spp. increased by two to three orders of magnitude across most of the source area. Statistical analysis indicated that reaching volatile fatty acid concentrations greater than 1000 mg/L and depleting sulfate to concentrations less than 50 mg/L were required to achieve a Dehalococcoides concentration greater than the 104 cells/mL recommended for generally effective reductive dechlorination. In a limited area, chloroform concentrations greater than 5 mg/L inhibited growth of Dehalococcoides populations despite the availability of electron donor and otherwise appropriate geochemical conditions. After implementing a groundwater recirculation system targeting the inhibited area, chloroform concentrations decreased permitting significant increases in concentrations of Dehalococcoides and vinyl chloride reductase gene copies.  相似文献   

9.
Four bacterial isolates (two resistant and two sensitive to chromium) were isolated from soil contaminated with tannery effluents at Jajmau (Kanpur), India, and were identified by 16S rDNA gene sequencing as Stenotrophomonas maltophilia, Exiguobacterium sp., Pantoea sp., and Aeromonas sp. Biosorption of chromium by dried and living biomasses was determined in the resistant and sensitive isolates. The effect of pH, initial metal concentration, and contact time on biosorption was studied. At pH 2.5 the living biomass of chromium resistant isolate Exiguobacterium sp. ZM‐2 biosorbed maximum amount of Cr6+ (29.8 mg/g) whereas the dried biomass of this isolate biosorbed 20.1 mg/g at an initial concentration of 100 mg/L. In case of chromate sensitive isolates, much difference was not observed in biosorption capacities between their dried and living biomasses. The maximum biosorption of Cr3+ was observed at pH 4.5. However, biosorption was identical in resistant and sensitive isolates. The data on chromium biosorption were analyzed using Langmuir and Freundlich isotherm model. The biosorption data of Cr6+ and Cr3+ from aqueous solution were better fitted in Langmuir isotherm model compared to Freundlich isotherm model. Metal recovery through desorption was observed better with dried biomasses compared to the living biomasses for both types of chromium ions. Bioaccumulation of chromate was found higher in chromate resistant isolates compared to the chromate sensitive isolates. Transmission electron microscopy confirmed the accumulation of chromium in cytoplasm in the resistant isolates.  相似文献   

10.
This study was undertaken to determine the cadmium removal efficiency of Lemna minor when it was used for treatment of wastewater having different characteristics, i. e., pH, temperature and cadmium concentration. Plants were cultivated in different pH solutions (4.5–8.0) and temperatures (15–35°C) in the presence of cadmium (0.1–10.0 mg/L) for 168 h. The amount of biomass obtained in the study period, the concentrations of cadmium in the tissues and in the media and net uptake of cadmium by Lemna have been determined for each condition. The percentages of cadmium uptake (PMU) and bioconcentration factors (BCF) were also calculated. The highest accumulation was obtained for the highest cadmium concentration of 10.0 mg Cd/L as 11.668 mg Cd/g at pH 6.0, and as 38.650 mg Cd/g at 35°C and pH 5.0. The cadmium accumulation gradually increased with initial concentration of the medium, but the opposite trend was observed for the PMU. However, the maximum PMU was obtained as 52.2% in the solution with the lowest concentration of 0.1 mg Cd/L. A mathematical model was used to describe the cadmium uptake and the equation obtained was seen to fit the experimental data very well.  相似文献   

11.
In this paper, a novel adsorbent developed by means of granulating of natural zeolite nanoparticles (i.e., clinoptilolite) was evaluated for possible removal of the petroleum monoaromatics (i.e., benzene, toluene, ethylbenzene, and xylene, BTEX). To do this, the natural zeolite was ground to produce nanosized particulate, then modified by two cationic surfactants and granulated. The effect of various parameters including temperature, initial pH of the solution, total dissolved solids (TDS), and concentration of a competitive substance (i.e., methyl tert‐butyl ether, MTBE) were studied and optimized using a Taguchi statistical approach. The results ascertained that initial pH of the solution was the most effective parameter. However, the low pH (acidic) was favorable for BTEX adsorption onto the developed adsorbents. In this study, the experimental parameters were optimized and the best adsorption condition by determination of effective factors was chosen. Based on the S/N ratio, the optimized conditions for BTEX removal were temperature of 40°C, initial pH of 3, TDS of 0 mg/L, and MTBE concentration of 100 µg/L. At the optimized conditions, the uptake of each BTEX compounds reached to more than 1.5 mg/g of adsorbents.  相似文献   

12.
The present work focuses on the performance of Fenton, sono‐Fenton, and sono‐photo‐Fenton processes for the oxidation of phenol present in aqueous solution. The effects of H2O2 concentration, Fe2+ concentration, pH, and initial phenol concentration on the oxidation of phenol were studied. The optimum Fe2+ and H2O2 concentrations for the Fenton process were 45 and 800 mg/L, respectively. For the sono‐Fenton process, the optimum Fe2+ and H2O2 concentrations were 30 and 800 mg/L, respectively. The optimal conditions for the sono‐photo‐Fenton process were found to be 20 mg/L of Fe2+ and 700 mg/L of H2O2. The optimum pH was found to be 3 for the processes investigated in the present study. The analysis of results showed that the sono‐photo‐Fenton method reduced the Fe2+ concentration by 30–50% and the H2O2 concentration by 12.5%. It was found that the sono‐photo‐Fenton technique showed better performance than the Fenton and sono‐Fenton processes for the oxidation of phenol. A lumped kinetic model was used to predict the chemical oxygen demand reduction and the model was found to fit the data.  相似文献   

13.
Three ammonium halide type surfactants were tested under standard laboratory condition for biodegradability and acute toxicity to Daphnia magna and in the Microtox test with the luminescent bacterium Photobacterium phosphoreum. The tested compounds are dimethyldistearylammonium chloride (DSDMAC), cetyltrimethylammonium bromide (HTMAB) and cetylbenzyldimethylammonium chloride (HBDMAC). The results indicate DSDMAC is less toxic than the other two surfactants and that it biodegrades rapidly at both lower (2.5 mg/L) and higher (10 mg/L) concentrations.  相似文献   

14.
拟柱孢藻（Cylindrospermopsis raciborskii）和角星鼓藻（Staurastrum spp.）是热带亚热带浮游植物群落中的常见优势种类,为了解铁对2种浮游植物季节动态和生长的影响,本文通过对典型热带水库的野外调查,分析铁与2种藻生物量和相对生物量的季节动态的关系,并通过室内实验分别以无机磷（KH2PO4）和有机磷（C6H13O9P）为磷源,比较3种铁浓度（0.029、0.29和0.689 mg/L）下拟柱孢藻（C.raciborskii,N8）和角星鼓藻（Staurastrum sp.,FACHB-1449）的比生长速率、铁载体产量和碱性磷酸酶活性的差异.结果显示,拟柱孢藻和角星鼓藻是浮游植物群落的主要优势种类,两者的生物量最大占到总生物量的82%以上;两者对环境变量响应的区别主要体现在对溶解性铁浓度变化的响应差异上,拟柱孢藻生物量与溶解性铁有显著的线性回归关系,但角星鼓藻的生物量与铁没有显著线性回归关系.室内实验中,拟柱孢藻N8的比生长速率在无机磷源铁浓度为0.689 mg/L条件下最大,为0.098±0.01 d-1,2种磷源条件下比生长速率均随铁浓度降低而显著降低,6个实验组均检到铁载体：6个实验组角星鼓藻FACHB-1449的比生长速率没有明显差异,平均为0.079±0.001 d-1,均未检出铁载体,磷源和铁浓度对其比生长速率的影响不显著;有机磷源条件下,拟柱孢藻N8实验组碱性磷酸酶活性均显著高于角星鼓藻FACHB-1449实验组,拟柱孢藻N8实验组酶活性随铁浓度降低而显著降低,但角星鼓藻FACHB-1449各实验组的碱性磷酸酶活性无明显差异.以上结果表明,水体中溶解性铁的供应对拟柱孢藻的种群动态和优势有重要作用,与角星鼓藻相比,拟柱孢藻的生长更易受到铁的限制,尤其在无机磷缺乏、磷源主要以有机磷形式供应时,铁对拟柱孢藻生长的限制作用增强.  相似文献   

15.
Scum formation is a widespread problem in activated sludge nutrient removal plants. It often comes along with an excessive development of the filamentous bacterium “Microthrix parvicella” stabilizing the flotation process. As “M. parvicella” was found to depend on long‐chain fatty acids (LCFA) as sole carbon source not only in vitro but also in situ, some options of in‐situ substrate supply are discussed. Wastewater concentrations of fatty acids in the range of 2 to 15 mg L‐1 and homologue concentrations from synthetic surfactant degradation below 10 mg L‐1 rule out these substrates as source for excessive biomass production. They might, however, well be suitable for start‐up of a “M. parvicella” population. Build‐up of excessive biomass might rely on fatty acid supply originating in cell walls of lysed stationary phase bacteria of long residence time sludge fractions such as scum layers. Moreover, biogenic surfactants such as rhamnolipids have been proved to be an excellent carbon source for excessive biomass production in vitro.  相似文献   

16.
For the first time ever, Enteromorpha compressa macroalgae (ECM), which is commonly found in Turkey, has been used as biosorbent by us. This study aims to investigate the biosorption of Cd2+ from aqueous solutions in a batch system by using an alga of ECM in different concentrations, pH levels, agitation rates (90–150 rpm), and contact periods. The maximum biosorption capacity of the ECM was found to be 9.50 mg/g at pH 6, Cd2+ initial concentration of 10 mg/L and agitation rate 150 rpm. Cadmium removal efficiency was about 95%. The experimental isotherm data were analyzed using the Langmuir and Freundlich equations. Isotherm parameters for both equations were determined and discussed. The stated biosorption mechanism is explained by the Freundlich isotherm (r2 = 0.998) theory. Two simplified kinetic models including a pseudo‐first‐ and second‐order equation were selected to follow the biosorption process. Kinetic parameters; rate constants, equilibrium adsorption capacities and related correlation coefficients, for each kinetic model were calculated and discussed. It was shown that the biosorption of cadmium onto ECM could be described by the pseudo‐second‐order equation (r2 > 0.99).  相似文献   

17.
The decolorization of some of azo‐metal complex dyes used in textile industry was investigated in this study. The halophilic prokaryotes isolated from a solar sea‐saltern (Çamalt?) in Turkey were screened for resistance to five commercial azo and mixture of azo‐metal complex dyes. Only one bacterium was found to be resistant against two of dyes, namely Lanaset Navy R and Lanaset Brown B. The bacterium was identified as Halobacillus sp. C‐22 according to 16S rRNA gene sequence analyses. Decolorization experiments were carried out at 120 mg/L concentration of both dyes, at room temperature, and with an acidic pH of 4.5. Lanaset Brown B was decolorized at a high adsorbance ratio (96.12%) at the 78th hour. However, Lanaset Navy R was rapidly decolorized in 10 min (46.67%) and showed the highest adsorbance ratio (60.66%) at the third hour. Freundlich and Langmuir equilibrium isotherm models were used to evaluate the adsorption of dyes and Freundlich isoterm was more suitable for biosorpsiyon of both azo dyes. The functional groups on Halobacillus sp. C‐22 for decolorization were characterized by FT‐IR. This is the first study to reveal potential of Halobacillus sp. for decolorization of textile azo‐metal complex dyes.  相似文献   

18.
大量微囊藻群体的形成和聚集是微囊藻水华形成的重要条件.氮、磷浓度是影响微囊藻群体生长的重要因素之一.为了探讨氮、磷浓度对微囊藻群体生长的影响,本研究以太湖微囊藻水华优势种之一的水华微囊藻作为研究对象,开展了不同氮、磷浓度对水华微囊藻群体生长的影响研究.以近几年太湖微囊藻水华暴发最严重的梅梁湾氮磷比的平均值作参考,氮、磷浓度设置为5个水平组,依次是T1(TN=0.1 mg/L,TP=0.005 mg/L)、T2(TN=1 mg/L,TP=0.05 mg/L)、T3(TN=10 mg/L,TP=0.5 mg/L)、T4(TN=100 mg/L,TP=5 mg/L)和T5(TN=250 mg/L,TP=5.44 mg/L)(BG-11培养基中氮、磷的浓度).结果显示,T1、T2、T3和T4 4组微囊藻群体均增大,且都发现有大于100个细胞的群体形成,群体大小分别为151、217、437和160 cells,而T5组微囊藻群体实验初期增大,实验后期变小,T5整个实验期间未发现有大于100个细胞的群体形成.研究结果表明相对低的氮、磷浓度有利于水华微囊藻群体的生长,而过高的氮、磷浓度则会抑制微囊藻群体生长.本研究结果也表明目前太湖氮、磷浓度有利于水华微囊藻群体的生长,从而有利于微囊藻水华形成.  相似文献   

19.
Mineralization of 14C‐radiolabled vinyl chloride ([1,2‐14C] VC) and cis‐dichloroethene ([1,2‐14C] cis‐DCE) under hypoxic (initial dissolved oxygen (DO) concentrations about 0.1 mg/L) and nominally anoxic (DO minimum detection limit = 0.01 mg/L) was examined in chloroethene‐exposed sediments from two groundwater and two surface water sites. The results show significant VC and dichloroethene (DCE) mineralization under hypoxic conditions. All the sample treatments exhibited pseudo‐first‐order kinetics for DCE and VC mineralization over an extended range of substrate concentrations. First‐order rates for VC mineralization were approximately 1 to 2 orders of magnitude higher in hypoxic groundwater sediment treatments and at least three times higher in hypoxic surface water sediment treatments than in the respective anoxic treatments. For VC, oxygen‐linked processes accounted for 65 to 85% of mineralization at DO concentrations below 0.1 mg/L, and 14CO2 was the only degradation product observed in VC treatments under hypoxic conditions. Because the lower detection limit for DO concentrations measured in the field is typically 0.1 to 0.5 mg/L, these results indicate that oxygen‐linked VC and DCE biodegradation can be significant under field conditions that appear anoxic. Furthermore, because rates of VC mineralization exceeded rates of DCE mineralization under hypoxic conditions, DCE accumulation without concomitant accumulation of VC may not be evidence of a DCE degradative “stall” in chloroethene plumes. Significantly, mineralization of VC above the level that could reasonably be attributed to residual DO contamination was also observed in several nominally anoxic (DO minimum detection limit = 0.01 mg/L) microcosm treatments.  相似文献   

20.
The percentage removal and uptake capacity of Basic Violet 14 using Hydrilla verticillata with living biomass was studied under batch conditions. The survival of H. verticillata was studied using the chlorophyll content in the living biomass. Bioaccumulation of Basic Violet 14 using H. verticillata was tested by varying the wet sorbent dosage (0.5–2.5 g), initial pH (3–8), and initial dye concentrations (5–25 mg L?1). The results show that the plant was effectively accumulating the Basic Violet 14 dye. The uptake capacity of Basic Violet 14 dye was observed as 5.9 and 21.3 mg g?1 at the initial dye concentration of 5 and 25 mg L?1, respectively, for a biomass of 5 g L?1 (wet weight) at pH 7.0 for 144 h. In general, the plant growth was found to be normal at lower concentrations and showed higher removal efficiency. It was also observed that removal efficiency of H. verticillata was found to decrease with increase in initial dye concentration. The biomass sample surface was analyzed using SEM imaging and functional groups present in the biomass were analyzed using FTIR. The equilibrium uptake capacity was analyzed by Langmuir and Freundlich isotherms. The equilibrium data was found to be fit well to both Langmuir and Freundlich isotherm models with higher coefficient of determination.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号