首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Double sandbar systems are common morphological features along sandy, wave‐dominated, micro‐ to meso‐tidal coastlines. In the companion paper, we demonstrated how various alongshore inner‐bar rip‐channel patterns can develop through morphological coupling to an alongshore‐variable outer bar. The simulated coupling patterns are, however, scarcely observed in the field. Instead, inner‐bar rip channels more often possess remarkably smaller and more variable alongshore length scales, suggesting that coupling mechanisms do not play a substantial role in the overall double‐sandbar dynamics. Here we use a numerical model to show that the relative importance of self‐organization and morphological coupling changes in favour of the latter with an increase in waterdepth variability along the outer‐bar crest. Furthermore, we find that the typical alongshore variability in inner‐bar rip‐channel scale is indicative of a mixture of self‐organization and morphological coupling rather than self‐organization alone. Morphological coupling may thus be more important to understanding and predicting the evolution of inner‐bar rip channels than previously envisaged. Copyright © 2010 John Wiley and Sons, Ltd.  相似文献   

2.
Nearshore sandbars, located in <10 m water depth, can contain remarkably periodic alongshore undulations in both cross‐shore position and depth. In a double sandbar system, the alongshore spacing of these morphological patterns in the inner sandbar may be identical to those in the outer sandbar. Although this morphological coupling has been observed previously, its frequency and predominance remain unclear. In this paper, we use a 9.3‐year dataset of daily low‐tide time exposure images from the double‐barred beach at Surfers Paradise (Gold Coast, Australia) to analyse the temporal and spatial characteristics of morphological coupling within a double sandbar system. We distinguish five types of morphological coupling between the inner and outer sandbars, of which four coincide with a downstate progression of the outer bar. Coupling is either in‐phase (with a landward perturbation of the inner bar facing an outer‐bar horn) or out‐of‐phase (with a seaward perturbation of the inner bar facing an outer‐bar horn), where the coupled inner‐bar features either consist of rip channels or, predominantly, perturbations of the low‐tide terrace. Cross‐correlation of the image‐derived inner‐ and outer‐bar patterns shows coupling to be a common phenomenon in the double sandbar system studied here, with coupling in 40% of the observations. In contrast to previous observations of sandbar–shoreline coupling at single‐barred beaches, in‐phase coupling (85% of all coupled bar patterns) predominates over out‐of‐phase coupling (15%). Based on our observations and bathymetries assimilated from the images for a restricted set of coupling events, we hypothesize that the angle of offshore wave incidence, wave height and depth variations along the outer sandbar determine the type of flow pattern (cell circulations versus meandering currents) above the inner bar and hence steer the type of coupling. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

3.
A 9.3-year dataset of low-tide time-exposure images from Surfers Paradise, Northern Gold Coast, Australia was used to characterise the state dynamics of a double sandbar system. The morphology of the nearshore sandbars was described by means of the sequential bar state classification scheme of Wright and Short [1984. Morphodynamic variability of surf zones and beaches: a synthesis. Marine Geology 56, 93-118]. Besides the two end members (the dissipative (D) and the reflective (R) states) and the four intermediate states (longshore bar and trough (LBT), rhythmic bar and beach (RBB), transverse bar and rip (TBR) and low tide terrace (LTT)), we identified two additional intermediate bar states. The erosive transverse bar and rip (eTBR) state related to the dominant oblique angle of wave incidence at the study site and the rhythmic low tide terrace (rLTT) related to the multiple bar setting. Using the alongshore barline variability and alongshore trough continuity as morphological indicators enabled the objective classification of the inner and outer bar states from the images. The outer bar was mostly in the TBR state and generally advanced sequentially through the states LBT-RBB-TBR-eTBR-LBT, with occasional transitions to the D state. Wave events led to abrupt state transitions of the outer bar, but, in contrast to expectations, did not necessarily correspond to upstate transitions. Instead, upstate (downstate) transitions coincided with angles of wave incidence θ larger (smaller) than 30°. The upstate TBR-eTBR-LBT sequence during high-angle events highlights the role of alongshore currents in bar straightening. The outer bar was found to govern the state of the inner bar to a large extent. Two types of inner bar behaviour were distinguished, based on the outer bar state. For intermediate outer bar states, the alongshore variability of the dominant inner rLTT state (52% in time) mainly related to that of the outer bar, implying some sort of morphological coupling. For dissipative outer bar states, however, the more upstate inner bar frequently separated from the shoreline and persistently developed rip channels as TBR became the most frequent state (60% in time).  相似文献   

4.
Subtidal nearshore sandbars may exhibit cyclic net offshore migration during their multi‐annual lifetime along many sandy coasts. Although this type of behavior can extend continuously for several kilometers, alongshore variations in cross‐shore bar position and bar amplitude are commonly observed. Alongshore variability is greatest when bars display km‐scale disruptions, indicative of a distinct alongshore phase shift in the bar cycle. An outer bar is then attached to an inner bar, forming a phenomenon known as a bar switch. Here, we investigate such large‐scale alongshore variability using a process‐based numerical profile model and observations at 24 transects along a 6 km section of the barred beach at Noordwijk, The Netherlands. When alongshore variability is limited, the model predicts that the bars migrate offshore at approximately the same rate (i.e. the bars remain in phase). Only under specific bar configurations with high wave‐energy levels is an increase in the alongshore variability predicted. This suggests that cross‐shore processes may trigger a switch in the case of specific antecedent morphological configurations combined with storm conditions. It is expected that three‐dimensional (3D) flow patterns augment the alongshore variability in such instances. In contrast to the observed bar behaviour, predicted bar morphologies on either side of a switch remain in different phases, even though the bars are occasionally located at a similar cross‐shore position. In short, the 1D model is not able to remove a bar switch. This data‐model mismatch suggests that 3D flow patterns are key to the dissipation of bar switches. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

5.
A 15‐month data set of daily time‐averaged video images (Argus) has been analyzed to describe the spatial and temporal variability of the rip channels on a multiple‐barred coast at Noordwijk aan Zee, The Netherlands. The landward boundary of the intertidal bars and a proxy of the subtidal bar crest, defined as the intertidal and subtidal bar lines respectively, were derived from the Argus images. Local seaward‐directed deviations of the bar lines represent the cross‐shore and alongshore locations of the rip channels. The average intertidal rip spacing ( ) was 243 m, but the rips were not spaced regularly (σλ/ = 0.47). Some intertidal rips were observed to fill up during falling tide, but the majority remained open. The filled intertidal rip channels had more landward positions and migrated more slowly (2.4 versus 4.6 m/day) in the alongshore direction than the open intertidal rip channels. The number and the alongshore migration rate of open intertidal rip channels increased with the preceding wave heights (r = 0.26, p < 0.01) and alongshore component of the offshore wave power (r = 0.25, p < 0.01), respectively. The shape of the intertidal bar lines was similar to the subtidal bar line shape, suggesting that the intertidal morphology is coupled to the subtidal alongshore variability. The phase of two bar lines could vary from in phase (0°) to out of phase (180°). The phase changes gradually, due to different alongshore migration rates of the intertidal and subtidal bar lines. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

6.
There is a paucity of field data to describe the transition in nearshore circulation between alongshore, meandering and rip current systems. A combination of in‐situ current meters and surf zone drifters are used to characterize the nearshore circulation over a transverse bar and rip morphology at Pensacola Beach, Florida in the presence of relatively low energy oblique waves. Current speeds vary in response to the relative wave height ratio (Hs/h), which defines the degree and extent of breaking over the shoal. In the absence of wave breaking the nearshore circulation was dominated by an alongshore current driven by the oblique waves. As waves begin to break across the shoal (0.2<Hs/ h<0.5) the nearshore circulation is characterized by a meandering alongshore current. As conditions became more dissipative (Hs/h>0.5), the meandering current is replaced by an unsteady rip circulation that moves offshore between the shoals before turning alongshore in the direction of wave advance outside the surf zone. The increase in wave dissipation is associated with an increase in very low frequency (VLF) variations in the current speed across the shoal and in the rip channel that caused the circulation to oscillate between an offshore and an alongshore flow. The unsteady nature of the nearshore circulation is responsible for 55% of all surf zone exits under these more dissipative conditions. In contrast, only 29% of the drifters released from the shoal exited the surf zone and bypassed the adjacent shoal with the alongshore‐meandering current. While the currents had a low velocity (maximum of ~0.4 m s‐1) and would not pose a significant hazard to the average swimmer, the results of this study suggest that the transverse bar and rip morphology is sufficient to create an alongshore variation in wave dissipation that forces alongshore meandering and low‐energy rip circulation systems under oblique wave forcing. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

7.
The Aquitanian Coast (France) is a high-energy meso-macrotidal environment exhibiting a highly variable double sandbar system. The inner and the outer bar generally exhibit a bar and rip morphology and persistent crescentic patterns, respectively. In June 2007, an intense five-day field experiment was carried out at Biscarrosse Beach. A large array of sensors was deployed on a well-developed southward-oriented bar and rip morphology. Daily topographic surveys were carried out together with video imaging to investigate beach morphodynamic evolution. During the experiment, offshore significant wave height ranged from 0.5 to 3 m, with a persistent shore-normal angle. This paper identifies two types of behavior of an observed rip current: (1) for low-energy waves, the rip current is active only between low and mid tide with maximum mean rip current velocity reaching 0.8 m/s for an offshore significant wave height (Hs) lower than 1 m; (2) for high-energy waves (Hs≈ 2.5–3 m), the rip current was active over the whole tide cycle with the presence of persistent intense offshore-directed flows between mid and high tide. For both low and high-energy waves, very low-frequency pulsations (15–30 min) of the mean currents are observed on both feeder and rip channels.A persistent slow shoreward migration of the sandbar was observed during the experiment while no significant alongshore migration of the system was measured. Onshore migration during the high-energy waves can be explained by different sediment transport processes such as flow velocity skewness, wave asymmetry or bed ventilation. High-frequency local measurements of the bed evolution show the presence of significant (in the order of 10 cm) fluctuations (in the order of 1 h). These fluctuations, observed for both low- and high-energy waves, are thought to be ripples and megaripples, respectively and may play an important but still poorly understood role in the larger scale morphodynamics. The present dataset improves the knowledge of rip dynamics as well as the morphological response of strongly alongshore non-uniform meso-macrotidal beaches.  相似文献   

8.
Simulations from a numerical model address the impact of nearshore morphology on surf zone retention on, open coast, rip-channelled beaches exposed to shore-normal waves. In the model, rip channels are regularly spaced alongshore with a given spacing λ. For a given reference case bathymetry (λ= 200 m), rip current circulations retain floating material at a hourly rate R of about 80 % which is in line with most existing field and laboratory studies in similar settings. The influence of a surf zone rip-channel morphology on surf zone retention is evaluated by a number of morphologic parameters. Results show that rip spacing is important. The ratio of the surf zone width X s to rip spacing λ controls surf zone retention with R rapidly increasing with increasing X s /λ up to a threshold of about 1 above which R levels off to become asymptotic to 100 %. The impact of the presence of a rip head bar is profound but nonlinear. The onset of wave breaking across the rip head bar drives a weak seaward located circulation providing major pathways for surface water exiting the surf zone compartment. Additional simulations suggest that alongshore variations in the offshore bathymetry are important. Patterns in the wave field enforced by wave refraction and potentially wave breaking across offshore bathymetric anomalies can provide a conduit for transporting floating material out of the surf zone and into the inner shelf region. This has major implications for surf zone flushing by inner-bar rips on multiple-barred beaches and on beaches facing bathymetric anomalies on the inner shelf.  相似文献   

9.
Sandbars, submerged ridges of sand parallel to the shoreline, affect surfzone circulation, beach topography and beach width. Under time‐varying wave forcing, sandbars may migrate onshore and offshore, referred to as two‐dimensional (2D) behaviour, and vary in planshape from alongshore uniform ridges to alongshore non‐uniform ridges through the growth and decay of three‐dimensional (3D) patterns, referred to as 3D behaviour. Although 2D and 3D sandbar behaviour is reasonably well understood along straight coasts, this is not the case for curved coasts, where the curvature can invoke spatial variability in wave forcing. Here, we analyse sandbar behaviour along the ～3000 m man‐made curved coastline of the Sand Engine, Netherlands, and determine the wave conditions governing this behaviour. 2D and 3D behaviour was quantified within a box north and west of the Sand Engine's tip, respectively, using a 2.4‐year dataset of daily low‐tide video images and a sparser bathymetric dataset. The northern and western sides behaved similarly in terms of 2D behaviour, with seasonal onshore and offshore migration, resulting in a stable position on inter‐annual timescales. However, both sandbar geometry and 3D behaviour differed substantially between both sides. The geometric differences (bar shape, bar crest depth and wavelength of 3D patterns) are consistent with computed alongshore differences in breaker height due to refraction. The differences in the timing in growth, decay and morphological coupling of 3D patterns in the sandbar and shoreline are likely related to differences in the local wave angle, imposed by the curved coast. Similar dependency of bar behaviour on local wave height and angle may be expected elsewhere along curved coasts, e.g. shoreline sandwaves, cuspate forelands or embayed beaches. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

10.
Tidal inlets interrupt longshore sediment transport, thereby exerting an influence on adjacent beach morphology. To investigate the details and spatial extent of an inlet's influence, we examine beach topographic change along a 1.5 km coastal reach adjacent to Matanzas Inlet, on the Florida Atlantic coast. Analyses of beach morphology reveal a behavioral change between 0.64 and 0.86 km from the inlet channel centerline, interpreted to represent the spatial extent of inlet influence. Beyond this boundary, the beach is narrow, exhibits a statistically significant inverse correlation of shoreline position with offshore wave conditions, and has a uniform alongshore pattern in temporal behavior, as determined from empirical orthogonal function (EOF) analysis. On the inlet side of the boundary, the beach experiences monotonic widening (with proximity to the inlet), lacks spatial consistency in correlation between shoreline position and wave conditions, and exhibits an irregular pattern in spatial EOF modes. We augment the field observations with numerical modeling that provides calculations of wave setup and nearshore current patterns near the inlet, highlighting the effects of the ebb‐tidal delta on the assailing waves. The modeling results are verified by a natural experiment that occurred during May 2009, when a storm‐produced sedimentary mass accreted to the lower beach, then subsequently split into two oppositely directed waves of sediment that migrated away from the initial accretion site in the subsequent months. Our results suggest that the ebb‐tidal delta produces a pattern of wave setup that creates a pressure gradient driving an alongshore flow that opposes the longshore currents derived from breaking of obliquely oriented incident waves. The resulting recirculation pattern on the margin of the ebb‐tidal delta provides a mechanism through which the inlet influences adjacent barrier island beach morphology. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

11.
In this study, an intertidal bar and trough system on the beach of Noordwijk, The Netherlands was monitored over a 15‐month period in order to examine the daily to seasonal sequential cross‐shore behaviour and to establish which conditions force or interrupt this cyclic bar behaviour. The beach morphology (bars and troughs) was classified from low‐tide Argus video images based on surface composition. From the classified images, time series of the landward boundary of the bar and of the trough were extracted. The time series of the alongshore‐averaged boundary positions described sawtooth motion with a period between 1 and 4 months, comprising gradual landward migration followed by abrupt seaward shifts. The abrupt seaward shift appeared to be a morphological reset induced by storm events, which lasted at least 30 h with a large average root‐mean‐square wave height (≥2 m) and offshore surge level (≥0·5 m), and a small trough (<20 m wide) in the pre‐storm beach morphology. The time series of the boundary positions exhibited very little longer (seasonal) scale variability, but somewhat larger smaller (daily) scale variability. The bar boundary was found to be more dynamic than the trough boundary. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

12.
Sandy beaches typically have one or more shore-parallel bars with superimposed smaller-scale three-dimensional (3D) bars. Knowledge of their morphodynamic behaviour under more realistic wave conditions is limited. This study investigates the response of beaches with two shore-parallel bars to sinusoidally time-varying angles of incidence, using a non-linear morphodynamic model. Different periods and amplitudes of this sinusoidal variation are considered, as well as different time-mean wave angles. For time-invariant and normally incident waves, results show that alongshore rhythmic 3D bars form in the domains of inner and outer shore-parallel bars. The 3D bars in the inner domain are coupled at half the outer-bars wavelength. This phase coupling breaks up when the wave angle varies in time. Initially, regular 3D bars form in the inner domain (free behaviour), which become irregular when 3D bars develop in the outer domain (forced behaviour). The heights of the 3D bars oscillate with time, reaching maximum values when the forcing period is comparable to the system adjustment time scale (∼ 10–20 days). For a time-varying wave angle around an oblique mean, alongshore migrating 3D bars emerge in both inner and outer domains. In contrast, for an oblique (constant) wave angle, 3D bars only form in the inner domain and they hardly migrate alongshore. For any forcing period, the dominant response period of the oscillating bar heights is at half the forcing period when waves are (on average) normally incident, and it equals the forcing period when waves are on average obliquely incident. Compared with time-invariant angles, heights of inner and outer 3D bars are (on average) smaller and larger, respectively, when the angle varies with time, particularly for forcing periods in the order of the system adjustment time scale. Increasing the amplitude of the time-varying wave angle weakens bar growth. Explanations of these results are also provided.  相似文献   

13.
Dye dispersion in the surf zone: Measurements and simple models   总被引：1，自引：0，他引：1  
To examine the spatial and temporal effect of low-volume land-based runoff on beach contamination, discrete batches of dye were released at the shoreline at three beaches in Santa Monica Bay in 2000 (Malibu Creek, Santa Monica Canyon and Pico–Kenter drain). Dye concentration was measured at the shoreline 25, 50 and 100 m alongshore from the dye release point for up to 40 min after dye release. The shoreline concentration time series are characterized either by approximately exponential decay in concentration after passage of the dye patch maximum concentration or by persistent low concentration up to 30 min after passage of the initial dye patch front. In the absence of detailed measurements of physical conditions, several simple advection–diffusion models are used to simulate shoreline concentration time series for an idealized surf zone in order to probe the roles of alongshore current shear and rip currents in producing the observed characteristics in dye concentration time series. Favorable qualitative and quantitative comparison of measured and simulated time series suggest alongshore current shear and rip currents play key roles in generating the observed characteristics of nearshore dye patch dispersion. The models demonstrate the potential effects of these flow features on the extent and duration of beach contamination owing to a continuous contamination source.  相似文献   

14.
This study analyses beach morphological change during six consecutive storms acting on the meso‐tidal Faro Beach (south Portugal) between 15 December 2009 and 7 January 2010. Morphological change of the sub‐aerial beach profile was monitored through frequent topographic surveys across 11 transects. Measurements of the surf/swash zone dimensions, nearshore bar dynamics, and wave run‐up were extracted from time averaged and timestack coastal images, and wave and tidal data were obtained from offshore stations. All the information combined suggests that during consecutive storm events, the antecedent morphological state can initially be the dominant controlling factor of beach response; while the hydrodynamic forcing, and especially the tide and surge levels, become more important during the later stages of a storm period. The dataset also reveals the dynamic nature of steep‐sloping beaches, since sub‐aerial beach volume reductions up to 30 m3/m were followed by intertidal area recovery (–2 < z < 3 m) with rates reaching ~10 m3/m. However, the observed cumulative dune erosion and profile pivoting imply that storms, even of regular intensity, can have a dramatic impact when they occur in groups. Nearshore bars seemed to respond to temporal scales more related to storm sequences than to individual events. The formation of a prominent crescentic offshore bar at ~200 m from the shoreline appeared to reverse the previous offshore migration trend of the inner bar, which was gradually shifted close to the seaward swash zone boundary. The partially understood nearshore bar processes appeared to be critical for storm wave attenuation in the surf zone; and were considered mainly responsible for the poor interpretation of the observed beach behaviour on the grounds of standard, non‐dimensional, morphological parameters. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

15.
Nearshore sandbars are characteristic features of sandy surf zones and have been observed with a variety of geometries in cross-shore (e.g. location) and longshore direction (e.g. planform). Although the behaviour of sandbars has been studied extensively on spatial scales up to kilometres and timescales up to years, it remains challenging to observe and explain their behaviour on larger spatial and temporal scales, especially in locations where coastline curvature can be prominent. In this paper, we study a data set with 38 years of coastal profiles, collected with alongshore intervals of 50 m, along the 34 km-long curved sandy shoreline of Sylt island, Germany. Sylt's shoreline has an orientation difference of ~20° between the northern and southern half of the island. We found that the decadal coastal profiles on the southern half show features of a low-tide terrace and a sandbar located further from the shoreline (~441 m). On the nothern half, the sandbar was located closer to the shoreline (~267 m) and was less pronounced, while the profiles show transverse bar and rip features. The alongshore planform also differed systematically and significantly along the two island sides. The sandbar on the southern island half, with alongshore periodicity on a larger length scale (~2240 m), was coupled out-of-phase to the shoreline, while no phase coupling was observed for the sandbar with periodicity on a shorter length scale (~670 m) on the northern half. We related the observed geometric differences of the sandbars to the difference in the local wave climate along Sylt, imposed by the shoreline shape. Our observations imply that small alongshore variations in wave climate, due to the increasing shoreline curvature on larger spatial scales, can lead to significant alongshore differences in the decadal evolution of coastal profiles, sandbars and shorelines. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd  相似文献   

16.
  相似文献   

17.
Erosion of hard‐rock coastal cliffs is understood to be caused by a combination of both marine and sub‐aerial processes. Beach morphology, tidal elevation and significant wave heights, especially under extreme storm conditions, can lead to variability in wave energy flux to the cliff‐toe. Wave and water level measurements in the nearshore under energetic conditions are difficult to obtain and in situ observations are rare. Here we use monthly cliff‐face volume changes detected using terrestrial laser scanning alongside beach morphological changes and modelled nearshore hydrodynamics to examine how exposed cliffs respond to changes in extreme wave conditions and beach morphology. The measurements cover the North Atlantic storms of 2013 to 2014 and consider two exposed stretches of coastline (Porthleven and Godrevy, UK) with contrasting beach morphology fronting the cliffs; a flat dissipative sandy beach at Godrevy and a steep reflective gravel beach at Porthleven. Beach slope and the elevation of the beach–cliff junction were found to influence the frequency of cliff inundation and the power of wave–cliff impacts. Numerical modelling (XBeach‐G) showed that under highly energetic wave conditions, i.e. those that occurred in the North Atlantic during winter 2013–2014, with Hs = 5.5 m (dissipative site) and 8 m (reflective site), the combination of greater wave height and steeper beach at the reflective site led to amplified wave run‐up, subjecting these cliffs to waves over four times as powerful as those impacting the cliffs at the dissipative site (39 kWm‐1 compared with 9 kWm‐1). This study highlighted the sensitivity of cliff erosion to extreme wave conditions, where the majority (over 90% of the annual value) of cliff‐face erosion ensued during the winter. The significance of these short‐term erosion rates in the context of long‐term retreat illustrates the importance of incorporating short‐term beach and wave dynamics into geomorphological studies of coastal cliff change. © 2017 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.  相似文献   

18.
Analyses of shoreline and bathymetry change near Calais, northern coast of France, showed that shoreline evolution during the 20th century was strongly related with shoreface and nearshore bathymetry variations. Coastal erosion generally corresponds to areas of nearshore seabed lowering while shoreline progradation is essentially associated with areas of seafloor aggradation, notably east of Calais where an extensive sand flat experienced seaward shoreline displacement up to more than 300 m between 1949 and 2000. Mapping of bathymetry changes since 1911 revealed that significant variation in nearshore morphology was caused by the onshore and alongshore migration of a prominent tidal sand bank that eventually welded to the shore. Comparison of bathymetry data showed that the volume of the bank increased by about 10×107 m3 during the 20th century, indicating that the bank was acting as a sediment sink for some of the sand transiting alongshore in the coastal zone. Several lines of evidence show that the bank also represented a major sediment source for the prograding tidal flat, supplying significant amounts of sand to the accreting upper beach. Simulation of wave propagation using the SWAN wave model (Booij et al., 1999) suggests that the onshore movement of the sand bank resulted in a decrease of wave energy in the nearshore zone, leading to more dissipative conditions. Such conditions would have increased nearshore sediment supply, favoring aeolian dune development on the upper beach and shoreline progradation. Our results suggest that the onshore migration of nearshore sand banks may represent one of the most important, and possibly the primary mechanism responsible for supplying marine sand to beaches and coastal dunes in this macrotidal coastal environment.  相似文献   

19.
The intertidal drainage channels on a macrotidal bar–trough (ridge‐and‐runnel) beach were monitored during a 17‐day survey. Type 1 channels were persistent, dominantly longshore systems essentially limited to the wide intertidal zone between mean high and low water neap tidal levels. The cumulative length of this channel type fluctuated as a function of topographically controlled through‐flow or flow impedance in troughs, and showed no correlation with the semi‐lunar tidal cycle. Smaller, ephemeral type 2 channels appeared as dominantly cross‐shore systems incising bars on the narrower upper and lower beach zones during spring tides. They disappeared during neap tides through infill by waves and aeolian activity. The only significant phase of type 1 channel mobility occurred during a brief moderate‐energy storm at the start of the survey. The effect of this mobility on beach morphology was inextricably linked to that of waves and currents. Meander bend migration, forced by wave‐ and longshore‐current‐induced migration of a bar during the storm, resulted in important but highly localized morphological change that was only a minor part of an irregular saw‐tooth pattern of change that affected the entire beach profile, and that was largely controlled by wave processes and longshore currents. The flow velocities in channels on this beach are too weak to generate the formation and longshore migration of high‐energy bedforms. Channel mobility and impact on beach morphology are expected to increase under storm conditions. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

20.
Shorefaces play a critical role in cross‐shore sediment transport between the beach and inner shelf, particularly during storm conditions. A comparison and examination of storm‐driven sedimentary changes on two adjacent shorefaces in Northern Ireland, located only 5 km apart, revealed significantly different geomorphological responses. The steeper shoreface at West Strand responded with extensive sediment deposition across almost the entire shoreface, in contrast with the more dissipative and quasi‐linear shoreface at Portstewart, which mostly showed nearshore bar changes. Results from the two sites, which have similar wave/wind characteristics and seabed sediments, suggest that: (i) cross‐shore morphology, (ii) immediately previous (antecedent) shoreface morphodynamic behaviour and (iii) the presence, or lack of, offshore sand appear to be the primary controls on storm‐driven sedimentary changes attributed to the high‐energy event. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号