共查询到20条相似文献，搜索用时 31 毫秒
1.
深海资料浮标体及系泊系统的阻力试验研究 总被引：1，自引：0，他引：1
本文结合国家“七五”重点科技攻关项目“深海资料浮标”研制而进行浮标体和系泊系统的各种阻力试验研究，试验成果已直接应用于深海资料浮标系泊系统设计。实践表明本文介绍的各种阻力试验结果是可靠的。 相似文献
2.
《海洋技术学报》2023,(4)
浮标锚链因磨损而断裂会导致浮标丢失,所以针对浮标锚泊系统的研究对锚链设计具有重要意义。为解决锚链系泊力计算方法精度不足和锚链力学简化模型与锚链实际形态不一致的问题,通过VOF （Volume of Fluid） 界面捕捉法建立了三维风、浪耦合流场,基于流体力学计算软件STAR-CCM+对一种滚塑浮标及锚链进行数值仿真计算。在建立双链节锚链物理模型基础上,通过求解浮标在风、浪中的受力及浮标与锚链连接处的受力损失求取锚链系泊力。结果显示,风浪越大,锚链的系泊力损失越大,2、3、4 级海况下浮标阻力损失分别为17.1%、36.6%、55.8%。锚链的双链节受力并非均等,主受力链节在2、3 级海况时承担90%以上的锚链系泊力,次受力链节的系泊力随着总系泊力的增加而增加,可见双链节锚链规格应与单链节相同。 相似文献
3.
深海锚泊浮标的二阶动力分析 总被引：3，自引：0，他引：3
计算了规则波上深海锚泊浮标的运动响应和锚泊线的动力响应。在对浮标的二阶漂移力计算时考虑了锚系的影响,并将浮标平均漂移的计算结果与不考虑锚系影响的结果进行了比较。本文计算所用浮标为单点系泊浮标,锚链由不同重量的分段组成。 相似文献
4.
5.
介绍了我国船型海洋资料浮标浮标体和锚泊系统的设计方案 ,该浮标可适用于远海、深海海域布放 ,定点实时获取布放海域的水文、气象等有关要素的现场参数 相似文献
6.
7.
8.
Dynamic Response Analysis of the Equivalent Water Depth Truncated Point of the Catenary Mooring Line
The real-time computer-controlled actuators are used to connect the truncated parts of moorings and risers in the active hybrid model testing system. This must be able to work in model-scale real time, based on feedback input from the floater motions. Thus, mooring line dynamics and damping effects are artificially simulated in real time, based on a computer-based model of the problem. In consideration of the nonlinear characteristics of the sea platform catenary mooring line, the equations of the mooring line motion are formulated by using the lumped-mass method and the dynamic response of several points on the mooring line is investigated by the time and frequency domain analysis method. The dynamic response of the representative point on the mooring line is analyzed under the condition of two different corresponding upper endpoint movements namely sine wave excitation and random wave excitation. The corresponding laws of the dynamic response between the equivalent water depth truncated points at different locations and the upper endpoint are obtained, which can provide technical support for further study of the active hybrid model test. 相似文献
9.
以新型激光雷达浮标系统为研究对象,基于ANSYS/AQWA开展了激光雷达浮标系统运动响应特性数值研究,研究了浮标吃水深度、形状参数对于激光雷达浮标运动响应的影响规律,分析了附加质量、辐射阻尼、运动响应RAO及一阶、二阶波浪力等水动力参数。采用时域分析方法对不同风浪流荷载入射角度下的激光雷达浮标锚泊系统张力特性进行了计算分析。研究结果表明:随着浮标吃水深度的增加,浮标纵荡方向响应无明显变化,垂荡响应显著增大;随着浮标底部圆台直径的增大,浮标纵荡方向响应变化较小,而圆柱形浮标垂荡运动响应显著大于圆台形浮标;当浮标系泊锚链发生松弛—张紧状态变化时易出现极端张力,且极端张力出现的幅值和频率随有效波高的增大和谱峰周期的减小而增大。 相似文献
10.
A theory and numerical tool are developed for the coupled-dynamic analysis of a deepwater floating platform with polyester mooring lines. The formulas allow relatively large elongation and nonlinear stress–strain relationships, as typically observed in polyester fibers. The mooring-line dynamics are based on a rod theory and the finite element method (FEM), with the governing equations described in a generalized coordinate system. The original rod theory [Nordgren, R.P., 1974. On Computation of the Motion of Elastic Rods. Journal of Applied Mechanics, 41, 777–780] is generalized to allow larger elongation and nonlinear stress–strain relationship. The dynamic modulus of polyester is modeled following an empirical regression formula suggested by [Bosman, R.L.M., Hooker, J., 1999. The Elastic Modulus Characteristic of Polyester Mooring Ropes. In: Proceedings of the Offshore Technology Conference, OTC 10779. Houston, Texas], in which the axial stiffness is not constant, but depends on loading conditions. Two case studies, the static and dynamic behavior of a tensioned buoy and a classic spar with polyester mooring lines, are conducted. The time-domain simulation results are systematically compared with those from the original rod theory. The effects of large elongation and nonlinear stress–strain relations are separately assessed. It is seen that the mean offset, motions, and tension with polyester lines can be different from those by original rod theory with linear elastic lines. 相似文献
11.
12.
波浪能是一种清洁、可再生的新型能源,波浪能发电装置在海上作业时会受到变化的风、浪、流载荷作用,需要系泊系统保证其稳性和安全性。以适用于中国南海500 m水深的振荡双浮体式波浪能发电装置为研究对象,运用频域计算与时域计算结合的方法对双浮体及其系泊系统的运动响应和动力载荷进行计算,获取极端海况与工作海况下浮体运动和系泊缆索张力的时历数据。参照BV船级社NR-493规定的海上浮式结构物系泊安全系数规范,对3种系泊方案进行安全校核和对比分析。选定其中一种系泊方案,通过改变系泊系统以及能量转换器（PTO）的参数,探究参数变化对双体波浪能装置运动响应以及系泊系统特性的影响,为类似应用于深水的双体波浪能装置系泊系统的设计提供参考。 相似文献
13.
以三锚系浮标系统为研究对象,基于AQWA与OrcaFlex软件开展了三锚系大型浮标系统运动响应特性数值模拟研究。对直径10 m的浮标结构在波浪荷载下的水动力特性进行研究,校核了浮标的初稳性和大倾角稳性特征,计算分析了浮标的附加质量、辐射阻尼、运动响应幅值算子RAO等水动力参数,阐明了不同风、浪、流工况下三锚系浮标与辅助浮筒的运动响应特性,揭示了浮标三锚链导缆孔处锚泊张力随入射角度、波高和周期等的变化规律。研究结果表明：该浮标稳性和随波性能较好。与无浮筒三锚系浮标相比,带辅助浮筒的三锚系浮标系统的运动响应和锚泊张力减小,随着波高和周期增大,三锚系浮标系泊锚链的极端张力值逐渐增大,尤其是在极端海况下,迎浪向锚链极端张力急剧增大。 相似文献
14.
In this paper, motion response of a moored floating structure interacting with a large amplitude and steep incident wave field is studied using a coupled time domain solution scheme. Solution of the hydrodynamic boundary value problem is achieved using a three-dimensional numerical wave tank (3D NWT) approach based upon a form of Mixed-Eulerian–Lagrangian (MEL) scheme. In the developed method, nonlinearity arising due to incident wave as well as nonlinear hydrostatics is completely captured while the hydrodynamic interactions of radiation and diffraction are determined at every time step based on certain simplifying approximations. Mooring lines are modelled as linear as well as nonlinear springs. The horizontal tension for each individual mooring line is obtained from the nonlinear load-excursion plot of the lines computed using catenary theory, from which the linear and nonlinear line stiffness are determined. Motions of three realistic floating structures with different mooring systems are analyzed considering various combinations of linear and approximate nonlinear hydrodynamic load computations and linear/nonlinear mooring line stiffness. Results are discussed to bring out the influence and need for consideration of nonlinearities in the hydrodynamics and hydrostatics as well as the nonlinear modelling of the line stiffness. 相似文献
15.
基于我国南海海域环境条件,对一座深水圆筒型钻井平台设计一套张紧式系泊定位系统,利用SESAM软件对平台运动响应和缆索张力进行分析计算,得到主要运动响应为纵荡、纵摇和垂荡。分别考虑0°和180°的环境载荷方向,对比得到0°方向的缆索张力更大,且6号和7号缆承受了主要的环境力。分析了平台运动的影响因素,认为缆索夹角设定为35°时较优,适度增大系泊缆初始长度和减小两端锚链长度可较为有效地降低系泊缆受力,系泊缆总根数保持12时（4根×3组）为最优方案。根据分析结果对初始系泊方案进行了优化,在风暴工况下系泊缆最大受力减小了约14.8%。钻井作业工况和一根系泊缆破断工况下,系泊缆受力和平台位移均能满足规范要求。 相似文献
16.
As a popular solution for mooring an FPSO （Floating Production, Storage and Offloading） permanently in shallow water, the soft yoke mooring system has been widely used in ocean oil production activities in the Bohai Bay of China. In order to simulate the interaction mechanism and conduct dynamic analysis of the soft yoke mooring system, a theoretical model with basic dynamic equations is established. A numerical iteration algorithm based on error estimation is developed to solve the equations and calculate the dynanfic response of the mooring system due to FPSO motions. Validation is conducted by wave basin experimentation. It is shown that the numerical simulation takes only a few iteration times and the final errors are small. Furthermore, the calculated results of both the static and dynamic responses agree well with those ones obtained by the model test. It indicates that the efficiency, the precision, the reliability and the validity of the developed numerical algorithm and program are rather good. It is proposed to develop a real-time monitoring system to further monitor the dynamic performance of the FPSO with a soft yoke mooring system under various real sea environments. 相似文献
17.
具有链—缆—链结构的复合系泊链缆因其相对于全钢链质量和成本上的优势而在深水系泊中得以广泛应用。基于细长杆理论采用有限差分法建立了可以考虑链—缆—链结构的复合系泊缆数值模型,将其应用于不同工况下全钢链和复合链缆运动的数值模拟中,并开展了验证。首先,将单根钢链顶张力数值模拟结果与不同工况下的模型试验结果进行了对比,验证了数值预报程序应用于全钢链的准确性。然后,对于复合系泊链缆开展了静刚度和动刚度迭代数值模拟,并将模拟结果同已发表文章中的算例结果进行比较,验证了该数值模型在复合链缆模拟上的准确性。发现对于单根钢锚链的验证,激励半径越大,激励周期越小,一个周期内顶张力幅值及其极差越大,钢链运动就越剧烈。对于链—缆—链式复合系泊链缆的验证,发现静刚度迭代中数值模拟结果与算例结果差异较小;对于动刚度迭代,除个别大幅慢漂工况外,两者有较高的吻合;且激励周期越小,激励半径越大,复合系泊链缆顶张力越大,弹性模量越小,运动越剧烈。对于聚酯缆刚度的敏感性分析,发现改变动刚度经验公式参数的情况下,杨氏模量的静刚度迭代和动刚度迭代结果误差分别最大达到了60.81%和68.21%,因此合成纤维材料特性对复合系泊链... 相似文献
18.
由于浅水深条件下悬链线系泊系统的性能对系泊缆长度和几何形状更为敏感,悬链线系泊系统的安装误差对其性能的影响较深水条件下的更为显著。因此首先对适用于半潜漂浮式风机的悬链线系泊系统施工进行研究,分别确定了锚安装位置误差、系泊缆预铺误差和系泊缆与漂浮式基础回接误差的来源,并根据施工条件给出了误差值。之后,以浮体动力学仿真作为手段,对系泊缆系统施工误差对其性能的影响进行基于时域仿真的量化研究。研究表明,锚安装位置误差对系泊系统性能影响不大,但系泊缆预铺和回接的误差对系泊系统性能的影响较大。系泊缆回接的误差可造成系泊缆张力平均值和标准差与设计值偏差近20%,可能对系泊系统疲劳寿命评估产生较大的影响。与系泊缆回接误差相比,系泊缆预铺误差的产生原因更为复杂,由于系泊缆预铺误差往往导致系泊缆长度增长,存在误差的系泊缆张力的各项统计值总体偏小,但可能会造成同组无误差系泊缆的张力过载。 相似文献
19.
FSRU码头系泊模型实验与数值模拟研究 总被引：1，自引：0，他引：1
FSRU在恶劣环境条件下的作业和安全停靠性能与系泊缆张力、靠垫挤压应力、船体6自由度运动等参数有关。针对FSRU码头处海洋环境条件,进行FSRU不同装载状况的模型实验,获得FSRU的6自由度运动及其系泊载荷的动力特性。基于三维辐射和绕射理论,使用Sesam软件进行频域计算,以此为基础在相应海洋环境条件下进行时域耦合分析,获得FSRU 6自由度运动、系泊载荷、靠垫应力等参数的响应时历。结果表明:30%装载、横浪条件下FSRU的运动响应最大,系泊缆张力未达到破断值,靠垫压力超过其压缩60%时的载荷;模型实验对FSRU运动响应和系泊缆张力的预测结果可信,靠垫受力情况需要数值仿真进行辅助研究。 相似文献
20.
I.D. James 《Ocean Engineering》1986,13(2)
The sea surface displacements measured by a wave staff, fixed in horizontal position, and a wave rider buoy, which moves with the water particles, are compared. Second-order theory shows that, to this approximation, the second harmonic in the surface displacement is not measured by the wave rider. Here a simple approximation to maximum amplitude gravity waves is considered; then a freely floating wave rider gives an approximately sinusoidal record at a lower frequency than the wave, while a tethered wave rider gives results depending on the mooring system. The horizontal motion of a tethered buoy still affects the measurements, particularly of the second and higher harmonics. 相似文献